(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product Detail
Basic Shape
End Shape (Right)
Material
Surface Treatment
Shaft Dia. D
Length L
Shaft Fit Tolerance
Hardness
B
Coarse [M]
Coarse [N]
F
Fine Thread [PMC]
Fine Thread [PMS]
Fine Thread [QMC]
Fine Thread [QMS]
H
J
P
Q
R
S
T
U
W
Z
type
End Shape (Left)
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Basic Shape
-
Solid -
One End Stepped -
Both Ends Stepped
-
-
End Shape (Right)
-
No Machining -
Tapped -
Threaded -
With Retaining Ring Grooves -
Tapped Hole -
Hex Socket Hole -
Tapered
-
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Shaft Dia. D(Ø)
-
Length L(mm)
-
Shaft Fit Tolerance
-
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
-
B(mm)
-
Coarse [M](mm)
-
Coarse [N](mm)
-
F(mm)
-
Fine Thread [PMC](mm)
-
Fine Thread [PMS](mm)
-
Fine Thread [QMC](mm)
-
Fine Thread [QMS](mm)
-
H(mm)
-
J(mm)
-
P(mm)
-
Q(mm)
-
R(mm)
-
S(mm)
-
T(mm)
-
U(mm)
-
W(mm)
-
Z(mm)
-
type
- FPSFJAA
- FPSFJAB
- FPSFJAC
- FPSFJAD
- FPSFJAE
- FPSFJAF
- FPSFJAG
- FPSFJAH
- FPSFJAT
- FPSFJBA
- FPSFJBB
- FPSFJBC
- FPSFJBD
- FPSFJBE
- FPSFJBF
- FPSFJBG
- FPSFJBH
- FPSFJBT
- FPSFJCA
- FPSFJCB
- FPSFJCC
- FPSFJCD
- FPSFJCE
- FPSFJCF
- FPSFJCG
- FPSFJCH
- FPSFJCT
- FPSFJDA
- FPSFJDB
- FPSFJDC
- FPSFJDD
- FPSFJDE
- FPSFJDF
- FPSFJDG
- FPSFJDH
- FPSFJDT
- FPSFJEA
- FPSFJEB
- FPSFJEC
- FPSFJED
- FPSFJEE
- FPSFJEF
- FPSFJEG
- FPSFJEH
- FPSFJET
- FPSFJFA
- FPSFJFB
- FPSFJFC
- FPSFJFD
- FPSFJFE
- FPSFJFF
- FPSFJFG
- FPSFJFH
- FPSFJFT
- FPSFJGA
- FPSFJGB
- FPSFJGC
- FPSFJGD
- FPSFJGE
- FPSFJGF
- FPSFJGG
- FPSFJGH
- FPSFJGT
- FPSFJHA
- FPSFJHB
- FPSFJHC
- FPSFJHD
- FPSFJHE
- FPSFJHF
- FPSFJHG
- FPSFJHH
- FPSFJHT
- FPSFJTA
- FPSFJTB
- FPSFJTC
- FPSFJTD
- FPSFJTE
- FPSFJTF
- FPSFJTG
- FPSFJTH
- FPSFJTT
- FPSSFJAA
- FPSSFJAB
- FPSSFJAC
- FPSSFJAD
- FPSSFJAE
- FPSSFJAF
- FPSSFJAG
- FPSSFJAH
- FPSSFJAT
- FPSSFJBA
- FPSSFJBB
- FPSSFJBC
- FPSSFJBD
- FPSSFJBE
- FPSSFJBF
- FPSSFJBG
- FPSSFJBH
- FPSSFJBT
- FPSSFJCA
- FPSSFJCB
- FPSSFJCC
- FPSSFJCD
- FPSSFJCE
- FPSSFJCF
- FPSSFJCG
- FPSSFJCH
- FPSSFJCT
- FPSSFJDA
- FPSSFJDB
- FPSSFJDC
- FPSSFJDD
- FPSSFJDE
- FPSSFJDF
- FPSSFJDG
- FPSSFJDH
- FPSSFJDT
- FPSSFJEA
- FPSSFJEB
- FPSSFJEC
- FPSSFJED
- FPSSFJEE
- FPSSFJEF
- FPSSFJEG
- FPSSFJEH
- FPSSFJET
- FPSSFJFA
- FPSSFJFB
- FPSSFJFC
- FPSSFJFD
- FPSSFJFE
- FPSSFJFF
- FPSSFJFG
- FPSSFJFH
- FPSSFJFT
- FPSSFJGA
- FPSSFJGB
- FPSSFJGC
- FPSSFJGD
- FPSSFJGE
- FPSSFJGF
- FPSSFJGG
- FPSSFJGH
- FPSSFJGT
- FPSSFJHA
- FPSSFJHB
- FPSSFJHC
- FPSSFJHD
- FPSSFJHE
- FPSSFJHF
- FPSSFJHG
- FPSSFJHH
- FPSSFJHT
- FPSSFJTA
- FPSSFJTB
- FPSSFJTC
- FPSSFJTD
- FPSSFJTE
- FPSSFJTF
- FPSSFJTG
- FPSSFJTH
- FPSSFJTT
- FSFJAA
- FSFJAB
- FSFJAC
- FSFJAD
- FSFJAE
- FSFJAF
- FSFJAG
- FSFJAH
- FSFJAT
- FSFJBA
- FSFJBB
- FSFJBC
- FSFJBD
- FSFJBE
- FSFJBF
- FSFJBG
- FSFJBH
- FSFJBT
- FSFJCA
- FSFJCB
- FSFJCC
- FSFJCD
- FSFJCE
- FSFJCF
- FSFJCG
- FSFJCH
- FSFJCT
- FSFJDA
- FSFJDB
- FSFJDC
- FSFJDD
- FSFJDE
- FSFJDF
- FSFJDG
- FSFJDH
- FSFJDT
- FSFJEA
- FSFJEB
- FSFJEC
- FSFJED
- FSFJEE
- FSFJEF
- FSFJEG
- FSFJEH
- FSFJET
- FSFJFA
- FSFJFB
- FSFJFC
- FSFJFD
- FSFJFE
- FSFJFF
- FSFJFG
- FSFJFH
- FSFJFT
- FSFJGA
- FSFJGB
- FSFJGC
- FSFJGD
- FSFJGE
- FSFJGF
- FSFJGG
- FSFJGH
- FSFJGT
- FSFJHA
- FSFJHB
- FSFJHC
- FSFJHD
- FSFJHE
- FSFJHF
- FSFJHG
- FSFJHH
- FSFJHT
- FSFJTA
- FSFJTB
- FSFJTC
- FSFJTD
- FSFJTE
- FSFJTF
- FSFJTG
- FSFJTH
- FSFJTT
- FSFUAA
- FSFUAB
- FSFUAC
- FSFUAD
- FSFUAE
- FSFUAF
- FSFUAG
- FSFUAH
- FSFUAT
- FSFUBA
- FSFUBB
- FSFUBC
- FSFUBD
- FSFUBE
- FSFUBF
- FSFUBG
- FSFUBH
- FSFUBT
- FSFUCA
- FSFUCB
- FSFUCC
- FSFUCD
- FSFUCE
- FSFUCF
- FSFUCG
- FSFUCH
- FSFUCT
- FSFUDA
- FSFUDB
- FSFUDC
- FSFUDD
- FSFUDE
- FSFUDF
- FSFUDG
- FSFUDH
- FSFUDT
- FSFUEA
- FSFUEB
- FSFUEC
- FSFUED
- FSFUEE
- FSFUEF
- FSFUEG
- FSFUEH
- FSFUET
- FSFUFA
- FSFUFB
- FSFUFC
- FSFUFD
- FSFUFE
- FSFUFF
- FSFUFG
- FSFUFH
- FSFUFT
- FSFUGA
- FSFUGB
- FSFUGC
- FSFUGD
- FSFUGE
- FSFUGF
- FSFUGG
- FSFUGH
- FSFUGT
- FSFUHA
- FSFUHB
- FSFUHC
- FSFUHD
- FSFUHE
- FSFUHF
- FSFUHG
- FSFUHH
- FSFUHT
- FSFUTA
- FSFUTB
- FSFUTC
- FSFUTD
- FSFUTE
- FSFUTF
- FSFUTG
- FSFUTH
- FSFUTT
- FSSFJAA
- FSSFJAB
- FSSFJAC
- FSSFJAD
- FSSFJAE
- FSSFJAF
- FSSFJAG
- FSSFJAH
- FSSFJAT
- FSSFJBA
- FSSFJBB
- FSSFJBC
- FSSFJBD
- FSSFJBE
- FSSFJBF
- FSSFJBG
- FSSFJBH
- FSSFJBT
- FSSFJCA
- FSSFJCB
- FSSFJCC
- FSSFJCD
- FSSFJCE
- FSSFJCF
- FSSFJCG
- FSSFJCH
- FSSFJCT
- FSSFJDA
- FSSFJDB
- FSSFJDC
- FSSFJDD
- FSSFJDE
- FSSFJDF
- FSSFJDG
- FSSFJDH
- FSSFJDT
- FSSFJEA
- FSSFJEB
- FSSFJEC
- FSSFJED
- FSSFJEE
- FSSFJEF
- FSSFJEG
- FSSFJEH
- FSSFJET
- FSSFJFA
- FSSFJFB
- FSSFJFC
- FSSFJFD
- FSSFJFE
- FSSFJFF
- FSSFJFG
- FSSFJFH
- FSSFJFT
- FSSFJGA
- FSSFJGB
- FSSFJGC
- FSSFJGD
- FSSFJGE
- FSSFJGF
- FSSFJGG
- FSSFJGH
- FSSFJGT
- FSSFJHA
- FSSFJHB
- FSSFJHC
- FSSFJHD
- FSSFJHE
- FSSFJHF
- FSSFJHG
- FSSFJHH
- FSSFJHT
- FSSFJTA
- FSSFJTB
- FSSFJTC
- FSSFJTD
- FSSFJTE
- FSSFJTF
- FSSFJTG
- FSSFJTH
- FSSFJTT
- FSSFUAA
- FSSFUAB
- FSSFUAC
- FSSFUAD
- FSSFUAE
- FSSFUAF
- FSSFUAG
- FSSFUAH
- FSSFUAT
- FSSFUBA
- FSSFUBB
- FSSFUBC
- FSSFUBD
- FSSFUBE
- FSSFUBF
- FSSFUBG
- FSSFUBH
- FSSFUBT
- FSSFUCA
- FSSFUCB
- FSSFUCC
- FSSFUCD
- FSSFUCE
- FSSFUCF
- FSSFUCG
- FSSFUCH
- FSSFUCT
- FSSFUDA
- FSSFUDB
- FSSFUDC
- FSSFUDD
- FSSFUDE
- FSSFUDF
- FSSFUDG
- FSSFUDH
- FSSFUDT
- FSSFUEA
- FSSFUEB
- FSSFUEC
- FSSFUED
- FSSFUEE
- FSSFUEF
- FSSFUEG
- FSSFUEH
- FSSFUET
- FSSFUFA
- FSSFUFB
- FSSFUFC
- FSSFUFD
- FSSFUFE
- FSSFUFF
- FSSFUFG
- FSSFUFH
- FSSFUFT
- FSSFUGA
- FSSFUGB
- FSSFUGC
- FSSFUGD
- FSSFUGE
- FSSFUGF
- FSSFUGG
- FSSFUGH
- FSSFUGT
- FSSFUHA
- FSSFUHB
- FSSFUHC
- FSSFUHD
- FSSFUHE
- FSSFUHF
- FSSFUHG
- FSSFUHH
- FSSFUHT
- FSSFUTA
- FSSFUTB
- FSSFUTC
- FSSFUTD
- FSSFUTE
- FSSFUTF
- FSSFUTG
- FSSFUTH
- FSSFUTT
-
End Shape (Left)
-
No Machining -
Tapped -
Threaded -
With Retaining Ring Grooves -
Tapped Hole -
Hex Socket -
Tapered
-
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 8 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Linear Shafts - Shaft Ends Configurable
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
You can add up to 6 items per a category to the compare list.
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Unit examples related to this product
Similar Products
Product DetailProduct Description
Combination of both ends' shapes unavailable for standard products becomes available.
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| FPSFJBA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJBB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJBC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1] |
| FPSFJBD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1] |
| FPSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSFJBF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1] |
| FPSFJBG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30] |
| FPSFJBH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-W[6-30/1] |
| FPSFJBT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-M[3,4,5,6,8,10,12]-Z[5-32/1] |
| FPSFJEA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FPSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FPSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMS[10,12,14,18]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FPSFJED-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-P[2-50/1]-Q[2-50/1] |
| FPSFJED-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-P[2-50/1]-QC |
| FPSFJEE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FPSFJEF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1]-P[2-50/1] |
| FPSFJEG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSFJEH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[4,5,6,8,10,12]-P[2-50/1]-W[6-24/1] |
| FPSFJET-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-M[3,4,5,6,8,10,12]-P[2-19/1]-Z[5-32/1] |
| FPSSFJBA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJBB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJBC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1] |
| FPSSFJBD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1] |
| FPSSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FPSSFJBF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1] |
| FPSSFJBG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30] |
| FPSSFJBH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-W[6-30/1] |
| FPSSFJBT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-M[3,4,5,6,8,10,12]-Z[5-32/1] |
| FPSSFJEA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FPSSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FPSSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMS[10,12,14,18]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FPSSFJED-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-P[2-50/1]-QC |
| FPSSFJED-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-P[2-50/1]-Q[2-50/1] |
| FPSSFJEE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FPSSFJEF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1]-P[2-50/1] |
| FPSSFJEG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FPSSFJEH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[4,5,6,8,10,12]-P[2-50/1]-W[6-24/1] |
| FPSSFJET-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-M[3,4,5,6,8,10,12]-P[2-19/1]-Z[5-32/1] |
| FSFJBA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30] |
| FSFJBB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30] |
| FSFJBC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1] |
| FSFJBD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1] |
| FSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1] |
| FSFJBF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1] |
| FSFJBG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30] |
| FSFJBH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-W[6-30/1] |
| FSFJBT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-M[3,4,5,6,8,10,12]-Z[5-32/1] |
| FSFJEA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1] |
| FSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FSFJEC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,50]-L[20-1500/0.5]-F[0-250/0.5]-QMS[10,12,14,18]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1] |
| FSFJED-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-P[2-50/1]-QC |
| FSFJED-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-P[2-50/1]-Q[2-50/1] |
| FSFJEE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1] |
| FSFJEF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1]-P[2-50/1] |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Basic Shape | End Shape (Left) | End Shape (Right) | Material | Surface Treatment | Shaft Dia. D (Ø) | Length L (mm) | Shaft Fit Tolerance | Hardness | B (mm) | Coarse [M] (mm) | Coarse [N] (mm) | F (mm) | Fine Thread [PMC] (mm) | Fine Thread [PMS] (mm) | Fine Thread [QMC] (mm) | Fine Thread [QMS] (mm) | H (mm) | J (mm) | P (mm) | Q (mm) | R (mm) | S (mm) | T (mm) | U (mm) | W (mm) | Z (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | No Machining | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Threaded | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | No Machining | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | With Retaining Ring Grooves | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 1500 | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Hex Socket Hole | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapped Hole | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 30 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapered | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 32 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | No Machining | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ～ 30 | 0 ～ 250 | - | - | 3 ～ 30 | - | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | 10 ～ 18 | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | No Machining | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | No Machining | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | With Retaining Ring Grooves | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | 1 ～ 1500 | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Hex Socket Hole | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapped Hole | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 4 ～ 12 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | 6 ～ 24 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapered | [Steel] SUJ2 Equivalent | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 12 | - | 2 ～ 95 | - | - | - | - | - | - | 2 ～ 19 | - | - | - | - | - | - | 5 ～ 32 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | With Retaining Ring Grooves | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 1500 | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Hex Socket Hole | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapped Hole | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 30 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapered | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 32 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 3 ～ 30 | 0 ～ 250 | - | - | 3 ～ 30 | - | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | 10 ～ 18 | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | No Machining | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | Tapped | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | With Retaining Ring Grooves | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | 1 ～ 1500 | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Hex Socket Hole | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapped Hole | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 30 | 4 ～ 12 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | 6 ～ 24 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapered | [Stainless Steel] SUS440C or 13Cr stainless | Hard Chrome Plating | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (56HRC~) | - | 3 ～ 12 | - | 2 ～ 95 | - | - | - | - | - | - | 2 ～ 19 | - | - | - | - | - | - | 5 ～ 32 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | With Retaining Ring Grooves | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 1500 | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Hex Socket Hole | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 20 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapped Hole | [Steel] SUJ2 Equivalent | Not Provided | 16 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 30 | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Solid | Tapped | Tapered | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 20 | 20 ～ 1000 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 32 | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ～ 30 | 0 ～ 250 | - | - | 3 ～ 30 | - | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | Threaded | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | - | 3 ～ 30 | 0 ～ 250 | - | - | - | 10 ～ 18 | - | - | 2 ～ 50 | - | - | 0 ～ 90 | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | No Machining | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | Both Ends Stepped | Tapped | Tapped | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | 3 ～ 30 | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | 2 ～ 50 | - | - | 0 ～ 250 | - | - | - | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | One End Stepped | Tapped | With Retaining Ring Grooves | [Steel] SUJ2 Equivalent | Not Provided | 6 ～ 50 | 20 ～ 1500 | g6 | Induction Hardened (58HRC~) | - | 3 ～ 30 | - | 0 ～ 250 | - | - | - | - | - | - | 2 ～ 50 | - | - | - | - | 1 ～ 1500 | - | - |
Loading...Tải…
Basic InformationThông tin cơ bản
| Shaft End Perpendicularity | Perpendicularity (0.2) | Heat Treatment | Induction Hardened |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy