(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

?

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译 此翻譯是Google翻譯

Chat Start chat
  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
  • Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
  • Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(36 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

PTPA14P2M060-K-P[3,4]
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Belt Type

    • P2M
    • P3M

    ClearTrống

  • Belt Width Used(mm)

    • 6
    • 10
    • 15

    ClearTrống

  • No. of Teeth(T)

    • 10
    • 12
    • 14
    • 15
    • 16
    • 18
    • 20
    • 22
    • 24
    • 25
    • 26
    • 28
    • 30
    • 32
    • 36
    • 40
    • 42
    • 44
    • 48
    • 50
    • 60

    ClearTrống

  • Material

    • Steel
      • S45C Equivalent
    • Aluminum
      • High Strength Aluminum Alloy

    ClearTrống

  • Surface Treatment

    • Black Oxide Coating
    • Clear Anodize
    • Electroless Nickel Plating

    ClearTrống

  • Shaft Bore Specifications (Both Sides Stepped Hole) [Y](mm)

    • 4

     

    ClearTrống

  • Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](Ø)

    • 8
    • 10
    • NK10 (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm)
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 19
    • 20

     

    ClearTrống

  • Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)

    • 10
    • 12
    • 15
    • 16
    • 18
    • 19
    • 20

    ClearTrống

  • Shaft Bore Specifications (Round Hole + Tap) [P](mm)

    • 3
    • 4
    • 4.5
    • 5
    • 6
    • 6.35
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16

     

    ClearTrống

  • Shaft Bore Specifications (Round Hole) [H](mm)

    • 3
    • 4
    • 4.5
    • 5
    • 6
    • 6.35
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12

     

    ClearTrống

  • Shaft Bore Specifications (Stepped Hole) [V](mm)

    • 4
    • 4.5
    • 6
    • 6.35
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12

     

    ClearTrống

  • Shaft Bore Specifications (Two-stepped Hole) [WB](mm)

    • 4

     

    ClearTrống

  • type

    • PTPA□□P2M
    • PTPA□□P3M
    • PTPM□□P3M
    • PTPP□□P3M

    ClearTrống

  • Pulley Shape

    • Shape A
    • Shape B
    • Shape K

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • 6 Day(s) or Less
    • 9 Day(s) or Less
    • 10 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

High Torque Timing Pulleys P2M/P3M Type

High Torque Timing Pulleys P2M/P3M Type
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MISUMI

Part Number :
36 Part Numbers Available

PTPA14P2M060-K-P[3,4]

PTPA15P2M060-K-P[3,4,5]

PTPA16P2M060-K-P[3,4,5]

PTPA18P2M060-K-P[3,4,5,6]

PTPA20P2M060-K-P[4,5,6,6.35]

PTPA22P2M060-K-P[4,5,6,6.35]

PTPA24P2M060-K-P[4,5,6,6.35]

PTPA25P2M060-K-P[4,5,6,6.35]

PTPM10P3M100-K-P4

PTPM10P3M150-K-P4

PTPM12P3M100-K-P[4,5]

PTPM12P3M150-K-P[4,5]

PTPM14P3M100-K-P[4,5,6,6.35]

PTPM14P3M150-K-P[4,5,6,6.35]

PTPM15P3M100-K-P[4,5,6,6.35]

PTPM15P3M150-K-P[4,5,6,6.35]

PTPM16P3M100-K-P[4,5,6,6.35]

PTPM16P3M150-K-P[4,5,6,6.35]

PTPM18P3M100-K-P[4,5,6,6.35]

PTPM18P3M150-K-P[4,5,6,6.35]

PTPA14P2M060-K-P[3,4]
PTPA14P2M060-K-P[3,4]

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
  • Order Qty :
  • Price :
    ---
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

PDFP.1-1443-2015

Unit examples related to this product
Guide Setup Changing Mechanism
View other unit examplesXem các ví dụ đơn vị khác
CAD Download
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
My Components
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
My Components
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
Similar ProductsSimilar Products
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
Product DetailProduct Detail

Product Description

[Material]
· Pulley: High strength aluminum alloy, S45C equivalent, SUS304
· Flange: Aluminum alloy, SPCC

[ ! ]
[ ! ]
■P2M
● Pulley Shape
Shape K
Shape A
Shape B
Standard Tooth Profile
Tooth groove dimensions slightly vary according to the number of teeth. (Pitch: 2.0 mm)
■Belt Nominal Width / Dimensions
mmNominal
P2M040P2M060P2M100
A6.07.512.0
W10.011.516.0
L17.020.023.0
■Tapped Hole Dimensions
dH7
Shaft Bore I.D.		M
(Coarse)		Accessory
Set Screws
3 to 6.35M3M3 × 3
7 to 22M4M4 × 3
[ ! ] Tapped holes and set screws are applicable to Shaft Bores P, N, and C
 

[ ! ] Shaft Bore Specs. H (Round Hole), V or F (Stepped Hole), Y (Both Sides Stepped Hole) and WB (Two-stepped Hole) do not have tapped holes and set screws.
It may have a relief in the tapped hole depending on its size.

[ ! ] The tolerance of the tap position dimension from the boss end face and pulley end face is ±0.3.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

Shaft Bore Specification Select shaft bore spec mark and each dim. from the table below.
[ ! ] Surface treatment may not be applied to the shaft bores.
[ ! ] Shaft Bore Dia. 4.5 and 6.35 are selectable within Shaft Bore Dia. d for Shaft Bore Specs. H, P, V and F.
[ ! ] Specify NK10 if keyway width of 4.0 mm (height 1.8 mm) for shaft bore spec. N and shaft bore diameter of 10 is desired.
[ ! ] For A-Shape pulley with shaft bore spec. P, N, or C, the screw holes are set at around 90° to keep away from peaks.

H round hole

P Round Hole + Tap

N New JIS Keyway + Tap
C Old JIS Keyway + Tap

 

V stepped hole

F Stepped Hole (Counterbored Hole on the Hub Side)

Y Both Ends Stepped Hole

WB Two-stepped hole

[!] Shape A: 2 ≤ J ≤ W－2, Shape B: 2 ≤ J ≤ L－2

[ ! ] Applicable to Shape B only
[ ! ] Z－F (d) ≥ 2
[ ! ]2 ≤ J ≤ L－2

[ ! ] Applicable to Shape A only
[ ! ] Q (R)－Y (d) ≥ 2
[ ! ]S+T ≤ W－3
[ ! ]S (T) ≥ 3

[ ! ] Applicable to Shape A only
[ ! ]Q－R ≥ 2
[ ! ] R－WB (d) ≥ 2
[ ! ]S+T ≤ W－3
[ ! ]S (T) ≥ 3

Type
Belt Width
[M] Material
[S] Surface Treatment
[A] Accessory
Set Screws
4 mm
6 mm
10 mm
Pulley
Flange
P2M040
P2M060
P2M100
PTPA
●
●
●
High Strength Aluminum Alloy
Aluminum alloy
Clear Anodize
SUS304
PTPB
●
●
●
Black Anodize
PTPK
●
●
●
Hard Clear Anodize
PTPN
●
●
●
Electroless nickel plating
PTPS
●
●
●
SUS304
SUS304
—
SUS304
[ ! ] Flange is installed.

Specification Table

 Part number—Pulley Shape—Shaft Bore Specs.: I.D.—Z—J—Q—R—S—T
(Shaft Bore Specs.: H, P, N, C)
(Shaft Bore Specs.: V, F)
(Shaft Bore Specs.: Y, WB)		PTPA48P2M060
PTPA32P2M060
PTPA40P2M060		—
—
—		B
B
A		—
—
—		NK10
V6
Y12
—
Z12
—
J8

—

Q18

—

R18

—

S3

—

T3
Part numberPulley
Shape		Pulley ShapeP.D.O.DDFE
TypeNumber of TeethType
Nominal Width		AB·K
Shaft Bore Specs.: 1 mm Increments / Selectable
H (d)
Round Hole
V (d), Y (d), WB (d)
Z·Q·R
Stepped Hole		P (d)
Round Hole
+
Tapped		N (d), C (d)
Keyway
+
Tapped		H (d)
Round Hole
V (d), F (d), Z
Stepped Hole		P (d)
Round Hole
+
Tapped		N (d), C (d)
Keyway
+
Tapped
Aluminum

PTPA
PTPB
PTPK
PTPN


Stainless Steel

PTPS		14P2M040

P2M060

P2M100		A

K		3———3·4—8.918.412126
153-59.559.0413
163-410.199.68148
173-510.8210.3115
183-611.4610.95
1912.111.59
204-644-6.3512.7312.22171610
2113.3712.86
2214.0113.5
2314.6414.13
2415.2814.77
254-104-615.9215.41202214
26A

B		4-104-64-84-6.3516.5516.0412
2717.1916.68
285-105·65-85-6.3517.8317.32
295-818.4617.95
305-125-819.118.592516
3119.7419.23
325-145-10820.3719.862818
335-1021.0120.514
3421.6521.14
3522.2821.77
3622.9222.41
375-165-12823.5523.04163020
3824.1923.68
3924.8324.32
405-195-138-105-1025.4624.963223
415-145-128·1026.125.5918
4226.7426.23
4327.3726.86
445-215-158-1328.0127.53525
4528.6528.14
4629.2828.77
4729.9229.41
4830.5630.05
4931.1930.68
505-245-188-155-185-158-1331.8331.32224028
5132.4731.96
5233.132.59
5333.7433.23
5434.3833.87
5535.0134.5
565-285-228-205-245-198-1835.6535.14284432
5736.2935.78
5836.9236.41
5937.5637.05
6038.237.69
[NG]Shaft Bore Dia.9 is not available for Shaft Bore Spec. N. [NG]Shaft Bore Dia. 8, 11, 13, 14, or 17 are not available for Shaft Bore Spec. C. 
[NG]For P2M100, Shaft Bore Dia. 3 is not available for Shape A. Shaft Bore Dia. 3 and 4 are not available for Shape B.
[ ! ]Shaft Bore Dia.4.5and6.35 are selectable for Shaft Bore Specs. H, P, V.
[ ! ]NK10 is selectable for Shaft Bore Spec. N.

Alterations

Part number—Pulley Shape—Shaft Bore Spec., Hole Dia.—Z—J—(KC120, etc.)
PTPA48P2M060—B—N10    —NFC
AlterationsSet Screw Angle ChangeNo FlangeSingle FlangeFlange CutHub Shortening
CodeKC120NFCRFC·LFCFCBC
Spec.Changes an angle of set screw to 120°.

[ ! ] For A-Shape pulley, the screw holes are set at around 120° to keep away from peaks.

(Flange 2 pcs. Included)
Ordering Code NFC
(Flange 1 pc. Included)
Ordering Code RFC
Application Notes
[NG] Not applicable to Shape K
RFCLFC
Cut the flange O.D. in 0.5
mm increments.
Ordering Code FC17
Application Notes
[ ! ]FC ≥ (O. D.) +1
[ ! ]FC ≤ F－2
[ ! ] No surface treatment
is applied on flange
circumference.		Cuts the hub length in 0.5
mm increments.
Ordering Code BC6.5
Application Notes
[ ! ] Shaft Bore Specs. H, V, F:
　　3 ≤ BC < L－W
[ ! ] Shaft Bore Specs. P, N, C:
　　M+3 ≤ BC < L－W
[NG] Not applicable to
Shape K and A
AlterationsAdd Side Holes [!] Conditions may vary depending on the shaft bore specs.
Side Tapped HoleSide Through HoleSide Counterbored
CodeQTC·QFCKTC·KFCZTC·ZFC
Spec.Machines tapped hole on the side surface of hub side.
Ordering Code QTC28−M4
Q□C Selection Specify the side hole position (P,C, D dims) in 0.5 mm increments
M Selection M3, M4, M5
Application Notes
[NG] Not applicable to Shape K
[ ! ] Minimum Thickness: 2 mm

Shape A: d + M + 4 ≤ Q□C ≤ E− (M+4)
For Shaft Bore Spec. V
Z + M + 4 ≤ Q□C ≤ E− (M+4)

Shape B: d + M + 4 ≤ Q□C ≤ D− (M+4)
For Shaft Bore Spec. V
Z + M + 4 ≤ Q□C ≤ D− (M+4)

[ ! ] When selecting P, N, or C for the Shaft Bore Spec.
QTC: Specify KC120
QFC: KC120 is not available
QSC: Not available

[NG] Not applicable to Shaft Bore Specs. F, Y, or WB.

(4 Locations)

(3 Locations)

Machines through hole on the side surface.
Ordering Code KTC28−K4.5
K□C Selection Specify the side hole position (P,C, D dims) in 0.5 mm increments
Specify K K4.0 to 11.0 (0.5 mm Increments)
Application Notes
[NG] Not applicable to Shape K
[ ! ] Minimum Thickness: 2 mm

Shape A: d + K + 4 ≤ K□C ≤ E− (K+4)
For Shaft Bore Spec. V
Z + K + 4 ≤ K□C ≤ E− (K+4)

Shape B: d + K + 4 ≤ K□C ≤ D− (K+4)
For Shaft Bore Spec. V
Z + K + 4 ≤ K□C ≤ D− (K+4)

[ ! ] When selecting P, N, or C for the Shaft Bore Spec.
KTC: Specify KC120
KFC: KC120 is not available
KSC: Not available

[NG] Not applicable to Shaft Bore Specs. F, Y, or WB.

(4 Locations)

(3 Locations)

Machines counterbored hole on the side surface.
Ordering Code ZTC28−ZM4
Z□C Selection Specify the side hole position (P,C, D dims) in 0.5 mm increments
ZM Selection ZM3, ZM4, ZM5
Application Notes
[NG] Not applicable to Shape K
[ ! ] Minimum Thickness: 2 mm

Shape A: d + d2 + 4 ≤ Z□C ≤ E− (d2 + 4)
For Shaft Bore Spec. V
Z + d2 + 4 ≤ Z□C ≤ E− (d2 + 4)

Shape B: d + d2 + 4 ≤ Z□C ≤ D− (d2 + 4)
For Shaft Bore Spec. V
Z + d2 + 4 ≤ Z□C ≤ D− (d2 + 4)

[ ! ] When selecting P, N, or C for the Shaft Bore Spec.
ZTC: Specify KC120
ZFC: KC120 is not available
ZSC: Not available

[NG] Not applicable to Shaft Bore Specs. F, Y, or WB.

(4 Locations)

(3 Locations)

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
45
60
  1. 1
Part Number
PTPA14P2M060-K-P[3,​4]
PTPA15P2M060-K-P[3,​4,​5]
PTPA16P2M060-K-P[3,​4,​5]
PTPA18P2M060-K-P[3,​4,​5,​6]
PTPA20P2M060-K-P[4,​5,​6,​6.35]
PTPA22P2M060-K-P[4,​5,​6,​6.35]
PTPA24P2M060-K-P[4,​5,​6,​6.35]
PTPA25P2M060-K-P[4,​5,​6,​6.35]
PTPM10P3M100-K-P4
PTPM10P3M150-K-P4
PTPM12P3M100-K-P[4,​5]
PTPM12P3M150-K-P[4,​5]
PTPM14P3M100-K-P[4,​5,​6,​6.35]
PTPM14P3M150-K-P[4,​5,​6,​6.35]
PTPM15P3M100-K-P[4,​5,​6,​6.35]
PTPM15P3M150-K-P[4,​5,​6,​6.35]
PTPM16P3M100-K-P[4,​5,​6,​6.35]
PTPM16P3M150-K-P[4,​5,​6,​6.35]
PTPM18P3M100-K-P[4,​5,​6,​6.35]
PTPM18P3M150-K-P[4,​5,​6,​6.35]
PTPM20P3M100-K-P[4,​5,​6,​6.35]
PTPM20P3M150-K-P[4,​5,​6,​6.35]
PTPP10P3M100-K-P4
PTPP10P3M150-K-P4
PTPP12P3M100-K-P[4,​5]
PTPP12P3M150-K-P[4,​5]
PTPP14P3M100-K-P[4,​5,​6,​6.35]
PTPP14P3M150-K-P[4,​5,​6,​6.35]
PTPP15P3M100-K-P[4,​5,​6,​6.35]
PTPP15P3M150-K-P[4,​5,​6,​6.35]
PTPP16P3M100-K-P[4,​5,​6,​6.35]
PTPP16P3M150-K-P[4,​5,​6,​6.35]
PTPP18P3M100-K-P[4,​5,​6,​6.35]
PTPP18P3M150-K-P[4,​5,​6,​6.35]
PTPP20P3M100-K-P[4,​5,​6,​6.35]
PTPP20P3M150-K-P[4,​5,​6,​6.35]
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngRoHSBelt Type Belt Width Used
(mm) 		No. of Teeth
(T) 		Pulley Shape Material Surface Treatment Shaft Bore Specifications (Both Sides Stepped Hole) [Y]
(mm) 		Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N]
(Ø) 		Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C]
(mm) 		Shaft Bore Specifications (Round Hole + Tap) [P]
(mm) 		Shaft Bore Specifications (Round Hole) [H]
(mm) 		Shaft Bore Specifications (Stepped Hole) [V]
(mm) 		Shaft Bore Specifications (Two-stepped Hole) [WB]
(mm)

-

1 Piece(s) 10 Day(s) 10P2M614Shape K[Aluminum] High Strength Aluminum AlloyClear Anodize---3 ～ 4---

-

1 Piece(s) 10 Day(s) 10P2M615Shape K[Aluminum] High Strength Aluminum AlloyClear Anodize---3 ～ 5---

-

1 Piece(s) 10 Day(s) 10P2M616Shape K[Aluminum] High Strength Aluminum AlloyClear Anodize---3 ～ 5---

-

1 Piece(s) 10 Day(s) 10P2M618Shape K[Aluminum] High Strength Aluminum AlloyClear Anodize---3 ～ 6---

-

1 Piece(s) 10 Day(s) 10P2M620Shape K[Aluminum] High Strength Aluminum AlloyClear Anodize---4 ～ 6.35---

-

1 Piece(s) 10 Day(s) 10P2M622Shape K[Aluminum] High Strength Aluminum AlloyClear Anodize---4 ～ 6.35---

-

1 Piece(s) 10 Day(s) 10P2M624Shape K[Aluminum] High Strength Aluminum AlloyClear Anodize---4 ～ 6.35---

-

1 Piece(s) 10 Day(s) 10P2M625Shape K[Aluminum] High Strength Aluminum AlloyClear Anodize---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1010Shape K[Steel] S45C EquivalentBlack Oxide Coating---4---

-

1 Piece(s) 13 Day(s) 10P3M1510Shape K[Steel] S45C EquivalentBlack Oxide Coating---4---

-

1 Piece(s) 13 Day(s) 10P3M1012Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 5---

-

1 Piece(s) 13 Day(s) 10P3M1512Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 5---

-

1 Piece(s) 13 Day(s) 10P3M1014Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1514Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1015Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1515Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1016Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1516Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1018Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1518Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1020Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 13 Day(s) 10P3M1520Shape K[Steel] S45C EquivalentBlack Oxide Coating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1010Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4---

-

1 Piece(s) 9 Day(s) 10P3M1510Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4---

-

1 Piece(s) 9 Day(s) 10P3M1012Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 5---

-

1 Piece(s) 9 Day(s) 10P3M1512Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 5---

-

1 Piece(s) 9 Day(s) 10P3M1014Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1514Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1015Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1515Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1016Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1516Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1018Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1518Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1020Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---

-

1 Piece(s) 9 Day(s) 10P3M1520Shape K[Steel] S45C EquivalentElectroless Nickel Plating---4 ～ 6.35---
Part Number
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngRoHSBelt Type Belt Width Used
(mm) 		No. of Teeth
(T) 		Pulley Shape Material Surface Treatment Shaft Bore Specifications (Both Sides Stepped Hole) [Y]
(mm) 		Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N]
(Ø) 		Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C]
(mm) 		Shaft Bore Specifications (Round Hole + Tap) [P]
(mm) 		Shaft Bore Specifications (Round Hole) [H]
(mm) 		Shaft Bore Specifications (Stepped Hole) [V]
(mm) 		Shaft Bore Specifications (Two-stepped Hole) [WB]
(mm)

Loading...Tải…

  1. 1
Download (PDF)
Catalog (2 page view)
 

Basic InformationThông tin cơ bản

Type Timing Pulleys Timing Pulley / Idler Pulleys

MISUMI Unit Example related to this product

Try to Find Other Examples

back next

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.

Close

Comparison list