(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product Detail
type
Shaft Bore Dia. 1 d1 (or d)
Shaft Bore Dia. 2 d2 (or d)
O.D.
Overall Length
Allowable Torque Range
Allowable Torque
Allowable Angular Misalignment
Single/Double
Shaft Tightening Method
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
type
- C-SCPS
-
Shaft Bore Dia. 1 d1 (or d)(Ø)
-
Shaft Bore Dia. 2 d2 (or d)(Ø)
-
O.D.(Ø)
-
Overall Length(mm)
-
Allowable Torque Range(N•m)
-
Allowable Torque(N•m)
-
Allowable Angular Misalignment(deg)
-
Single/Double
- 单膜片
-
Shaft Tightening Method
- 紧固螺栓
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 9 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Disc Couplings High Regidity Single Disc, Clamping Type (C-SCPS28-6-8)
- Until 31/12/2024
- Volume Discount
You can add up to 6 items per a category to the compare list.
Brand :
MiSUMi Economy
Filter By :
- All
- Sale Items
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 501,675VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
This is an economy item, The price is cheaper than the MISUMI standard product.
[Features]
The rigidity is comparable to the high rigidity SCPS of previous products, and the cost is greatly reduced. The surface of this product has not been oxidized, which may be rough.
Economy High Rigidity Single Disc Coupling
High torqueZero backlashHigh speed
- Exceptional high torque capacity for robust performance in demanding applications
- Designed for precise torque transmission with zero backlash
- Capable of handling high rotational speeds up to specified RPM
- Easy clamping type installation for quick and secure setup
- Suitable for a wide range of temperatures
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
coupling Product Overview
The disc coupling is composed of several groups of discs (stainless steel thin plates) that are interlaced with two halves of the coupling with bolts, and each group of discs is formed by stacking several pieces.
The disc coupling relies on the elastic deformation of the disc to compensate for the relative displacement of the connected two shafts, which is a high-performance flexible coupling with strong metal components.
It is characterized by compact structure, no backlash, high strength, long service life, no rotation clearance, no influence of temperature and oil pollution, acid resistance, alkali resistance and corrosion resistance.
Applicable motor types: recommended for servo motors, stepping motors and general motors.
The disc coupling relies on the elastic deformation of the disc to compensate for the relative displacement of the connected two shafts, which is a high-performance flexible coupling with strong metal components.
It is characterized by compact structure, no backlash, high strength, long service life, no rotation clearance, no influence of temperature and oil pollution, acid resistance, alkali resistance and corrosion resistance.
Applicable motor types: recommended for servo motors, stepping motors and general motors.
coupling Product Feature
■ Main characteristics of disc coupling
1. Strong ability to compensate for misalignment between two axes. Compared with tooth coupling, angular displacement can be doubled. In case of radial displacement, reaction force is small, flexibility is large, and certain axial, radial and angular displacements are allowed.
2. It has obvious shock absorption, no noise and no wear.
3. Suitable for working in high temperature (-80+300) and harsh environment, and operate safely under shock and vibration conditions.
4. High transmission efficiency, up to 99.86%. Especially suitable for medium, high speed and high power transmission.
5. Simple structure, light weight, small in size and convenient assembly and disassembly. It can be assembled and disassembled without moving the machine (models with intermediate shaft), and requiring no lubrication.
6. It can accurately transmit the rotational speed without slip, and can be used for transmission of precision machinery
1. Strong ability to compensate for misalignment between two axes. Compared with tooth coupling, angular displacement can be doubled. In case of radial displacement, reaction force is small, flexibility is large, and certain axial, radial and angular displacements are allowed.
2. It has obvious shock absorption, no noise and no wear.
3. Suitable for working in high temperature (-80+300) and harsh environment, and operate safely under shock and vibration conditions.
4. High transmission efficiency, up to 99.86%. Especially suitable for medium, high speed and high power transmission.
5. Simple structure, light weight, small in size and convenient assembly and disassembly. It can be assembled and disassembled without moving the machine (models with intermediate shaft), and requiring no lubrication.
6. It can accurately transmit the rotational speed without slip, and can be used for transmission of precision machinery
Dimensional coupling Drawing
The rigidity is comparable to the high rigidity SCPW of previous products, and the cost is greatly reduced. The surface has not been oxidized, which may be rough. 
・Material Table
| Type | Parts | [ M ] Material | [ S ] Surface Treatment | [ A ] Accessories |
| C－SCPS | Body | Aluminum | － | Hex socket bolt (Clamping bolt) |
| Disc | Stainless Steel | － | ||
| Lock Bolt | SCM435 | Ferroferric Oxide Protective Film |
coupling Specification Table
Please order after selecting part number and parameters according to the selection steps to . 
Please specify the shaft bore dia. within the range of d1≤d2.
Please specify the shaft bore dia. within the range of d1≤d2.Part Number ( Type·  No.) | － |  d1 | － | d2 |
| C－SCPS21 | － | 6 | － | 8 |
| Part Number | d1, d2 selection (But d1≤d2) | D | d3 | L | ℓ | F | A | Fastening Bolt | ||||||||||||||||||
| Type | No. | M | Tightening torque (N·m) | |||||||||||||||||||||||
| C－SCPS | 16 | 4 | 5 | 6 | 16.6 | 6.5 | 16.6 | 7.2 | 3 | 5.3 | M2.6 | 1.0 | ||||||||||||||
| 21 | 4 | 5 | 6 | 8 | 21 | 9.5 | 16.7 | 7 | 3.5 | 7 | M2.6 | 1.2 | ||||||||||||||
| 28 | 6 | 6.35 | 8 | 10 | 28 | 12 | 21.5 | 9 | 4 | 9.5 | M3 | 1.7 | ||||||||||||||
| 34 | 6 | 6.35 | 8 | 10 | 11 | 12 | 14 | 34 | 15 | 23.3 | 9.8 | 5 | 12 | M3 | 1.7 | |||||||||||
| 46 | 8 | 10 | 11 | 12 | 14 | 15 | 16 | 17 | 19 | 46 | 22 | 29.8 | 12.6 | 6 | 16.5 | M4 | 4.1 | |||||||||
| 55 | 12 | 14 | 15 | 16 | 17 | 19 | 20 | 22 | 24 | 25 | 54.5 | 26 | 37.2 | 16 | 7 | 20.5 | M5 | 8.2 | ||||||||
■Characteristic Value
| Part Number | Allowable torque (N·m) | Allowable Angular Misalignment (°) | Static torsional stiffness (N·m/rad) | Maximum Rotational Speed (r/min) | Moment of inertia (kg·m2) | Allowable axial amplitude (mm) | Compensation coefficient | Weight (g) | |
| Type | No. | ||||||||
| C－SCPS | 16 | 0.5 | 1.0 | 1000 | 10000 | 3.16×10－7 | ±0.10 | 1.5 | 8 |
| 21 | 1.0 | 1700 | 7.90×10－7 | 12 | |||||
| 28 | 1.5 | 1.2 | 6000 | 3.24×10－6 | 30 | ||||
| 34 | 4.0 | 1.5 | 8000 | 7.60×10－6 | 45 | ||||
| 46 | 10.0 | 20000 | 3.23×10－5 | ±0.15 | 105 | ||||
| 55 | 25.0 | 33000 | 8.19×10－5 | 180 | |||||
[ ! ]Lateral misalignment, angular misalignment and axial amplitude are all single allowable values. If there are multiple deviations at the same time, the allowable value of each deviation will be reduced to 1/2 of the original value.
■Shaft slip torque (N·m)
[ ! ]When the shaft slip torque is less than the allowable torque, please use it below the shaft slip torque.
| Part Number | d1, d2 | |||||||||||||||||
| Type | No. | 4 | 5 | 6 | 6.35 | 8 | 10 | 11 | 12 | 14 | 15 | 16 | 17 | 19 | 20 | 22 | 24 | 25 |
| C－SCPS | 16 | 0.5 | 0.5 | 0.5 | － | － | － | － | － | － | － | － | － | － | － | － | － | － |
| 21 | 1.0 | 1.0 | 1.0 | － | 1.0 | － | － | － | － | － | － | － | － | － | － | － | － | |
| 28 | － | － | 1.5 | 1.5 | 1.5 | 1.5 | － | － | － | － | － | － | － | － | － | － | － | |
| 34 | － | － | 2.5 | 2.5 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | － | － | － | － | － | － | － | － | |
| 46 | － | － | － | － | 6.0 | 6.0 | 8.0 | 8.0 | 8.0 | 8.0 | 10 | 10 | 10 | － | － | － | － | |
| 55 | － | － | － | － | － | － | － | 16 | 16 | 19 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
coupling Precautions
■ Calibration and adjustment
1. The coupling allows axis deviation, and transmits rotation angle and torque, but when the axis deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced.
Be sure to make calibration and adjustment.
2. Axis deviation includes lateral misalignment (parallel error of two axes), angular misalignment (angular error of two axes) and axial amplitude (axial movement of shaft).
Please calibrate and adjust the shaft to ensure that the axis deviation is below the allowable value recorded in the dimension and performance table of each product.
3. The allowable value of axis deviation recorded in the dimension and performance table refers to the situation when either lateral misalignment, angular misalignment or axial amplitude occurs alone. When more than two axis deviations occur at the same time, the corresponding allowable values are halved respectively.
4. Axis deviation not only occurs when assembling to the device, but also is caused by vibration, thermal expansion and bearing wear in operation. Therefore, it is recommended to set the axis deviation below 1/3 of the allowable value.
1. The coupling allows axis deviation, and transmits rotation angle and torque, but when the axis deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced.
Be sure to make calibration and adjustment.
2. Axis deviation includes lateral misalignment (parallel error of two axes), angular misalignment (angular error of two axes) and axial amplitude (axial movement of shaft).
Please calibrate and adjust the shaft to ensure that the axis deviation is below the allowable value recorded in the dimension and performance table of each product.
3. The allowable value of axis deviation recorded in the dimension and performance table refers to the situation when either lateral misalignment, angular misalignment or axial amplitude occurs alone. When more than two axis deviations occur at the same time, the corresponding allowable values are halved respectively.
4. Axis deviation not only occurs when assembling to the device, but also is caused by vibration, thermal expansion and bearing wear in operation. Therefore, it is recommended to set the axis deviation below 1/3 of the allowable value.
Example of Use coupling
Use example of coupling 1: motor×gear box
Use example of coupling 2: motor×ball screw
Use example of coupling 3: motor×encoder
Use example of coupling 4: motor×measuring tester
coupling Usage Method
■Mounting method
STEP1 Insert the coupling
Confirm that the clamping bolt has been unscrewed, and then remove the dust, foreign matter and oil from the shaft and coupling bore.
Then, when inserting the coupling into the shaft, please be careful not to put the disc under excessive stress such as compression or tension.
STEP2 Use fixture to adjust
Please use fixture to adjust and fix the concentricity of the left and right hubs of the coupling with high accuracy.
STEP3 Simple lateral misalignment and angular misalignment confirmation
Under the condition of unscrewed bolts, make the coupling slide axially and confirm its smooth movement.
Then, rotate the coupling to make sure it moves smoothly.
Lateral misalignment is not allowed for single disc type coupling, so carry out positioning securely.STEP4 Installation
Please adjust the shaft insertion amount according to the dimension ℓ in the product catalog, and use a torque wrench to tighten with the specified torque.
＊ If the specified torque cannot be reached once, please cross fasten the left and right clamps twice or three times.
STEP1 Insert the coupling
Confirm that the clamping bolt has been unscrewed, and then remove the dust, foreign matter and oil from the shaft and coupling bore.
Then, when inserting the coupling into the shaft, please be careful not to put the disc under excessive stress such as compression or tension.
STEP2 Use fixture to adjust
Please use fixture to adjust and fix the concentricity of the left and right hubs of the coupling with high accuracy.
STEP3 Simple lateral misalignment and angular misalignment confirmation
Under the condition of unscrewed bolts, make the coupling slide axially and confirm its smooth movement.
Then, rotate the coupling to make sure it moves smoothly.
Lateral misalignment is not allowed for single disc type coupling, so carry out positioning securely.STEP4 Installation
Please adjust the shaft insertion amount according to the dimension ℓ in the product catalog, and use a torque wrench to tighten with the specified torque.
＊ If the specified torque cannot be reached once, please cross fasten the left and right clamps twice or three times.
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| C-SCPS28-6-8 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Shaft Bore Dia. 1 d1 (or d) (Ø) | Shaft Bore Dia. 2 d2 (or d) (Ø) | O.D. (Ø) | Overall Length (mm) | Allowable Torque Range (N•m) | Allowable Torque (N•m) | Allowable Angular Misalignment (deg) | Allowable Axial Misalignment (mm) | Moment of Inertia (kg･m2) | Single/Double | Shaft Tightening Method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
524,962 VND 472,466 VND | 1 Piece(s) | Available | 9 Day(s) | 6 | 8 | 28 | 21.5 | 1.01~3.00 | 1.5 | 1.2 | 0.1 | 3.24×10-6 | 单膜片 | 紧固螺栓 |
Loading...Tải…
Basic InformationThông tin cơ bản
| Series Name | Disc | Application | For Servo Motors | Features | High Torsional Rigidity / High Torque Type / Zero Backlash |
|---|---|---|---|---|---|
| Allowable Misalignment | Angular Misalignment / Axial Misalignment | Max. Rotational Speed Range(r/min) | 4001~10000 | Body Material | Aluminum Alloy |
| Product Category | Coupling Main Body | Max. Rotational Speed(r/min) | 10000 | Disc Material | Stainless Steel |
| Single/Double | Single | Shaft Bore Shape | Standard Bore | Shaft Tightening Method | Fastening Bolt |
Please check the type/dimensions/specifications of the part C-SCPS28-6-8 in the Disc Couplings High Regidity Single Disc, Clamping Type series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần C-SCPS28-6-8 trong chuỗi Disc Couplings High Regidity Single Disc, Clamping Type.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: What is a coupling?
- Answer:Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.
- Question:Question: What are the types of MISUMI couplings?
- Answer:Answer: There are disc type, grooved type, cross type, claw type, bellows type, rigid type and universal joint type.
- Question:Question: How to select coupling according to motor?
- Answer:Answer: Disc type is recommended for servo motors, grooved type is recommended for stepping motors, and cross type is recommended for universal motors.
- Question:Question: How to select according to the purpose, environment, working conditions?
- Answer:Answer: Please refer to the MISUMI website.
- Question:Question: What kind of coupling should be used when the angular misalignment is very large?
- Answer:Answer: Please select the universal joint with allowable angular misalignment of 30 degrees. In addition, when grease cannot be applied regularly, use a rubber sleeve to fill grease and use it.
- Question:Question: Which disc type coupling is better, single disc type or double disc type?
-
Answer:Answer:
Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase.
Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure. Special attention should be paid to centering during use. - Question:Question: How much is appropriate to insert the shaft into the coupling during installation?
- Answer:Answer: Please select the length of the main body (coupling part) described in the product catalog. If the insertion amount is too short, the shaft may slip and the clamping part may be damaged; If the insertion amount is too long, it will be damaged due to shaft interference inside the coupling.
- Question:Question: Why is it necessary to install a protection cover around the coupling?
- Answer:Answer: Due to high-speed rotation, accidental contact may result in injury or entanglement of gloves, towels, etc. In addition, for some reasons, parts may be damaged or debris may be scattered. Therefore, be sure to install the safety protection cover.
- Question:Question: What should I do if there is no matching shaft bore diameter?
- Answer:Answer: Please select a product with changeable keyway width or available with keyway processing. MISUMI products are divided into MCSLCWK series (disc type), CPOC series (cross type) and MMJN series (claw type), etc.
- Question:Question: Is it a defective product that has difference in groove gap width?
- Answer:Answer: Since the difference is within the dimensional tolerance range, there is no problem.
Products like this...
| Part Number |
|---|
| C-SCPS16-5-5 |
| C-SCPS16-5-6 |
| C-SCPS16-6-6 |
| C-SCPS28-6.35-10 |
| C-SCPS28-6.35-6.35 |
| C-SCPS28-6.35-8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Shaft Bore Dia. 1 d1 (or d) (Ø) | Shaft Bore Dia. 2 d2 (or d) (Ø) | O.D. (Ø) | Overall Length (mm) | Allowable Torque Range (N•m) | Allowable Torque (N•m) | Allowable Angular Misalignment (deg) | Allowable Axial Misalignment (mm) | Moment of Inertia (kg･m2) | Single/Double | Shaft Tightening Method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
645,821 VND | 1 Piece(s) | Available | 9 Day(s) | 5 | 5 | 16.6 | 16.6 | 0.05~1.00 | 0.5 | 1 | 0.1 | 3.16×10-7 | 单膜片 | 紧固螺栓 | |
645,821 VND | 1 Piece(s) | Available | 9 Day(s) | 5 | 6 | 16.6 | 16.6 | 0.05~1.00 | 0.5 | 1 | 0.1 | 3.16×10-7 | 单膜片 | 紧固螺栓 | |
645,821 VND | 1 Piece(s) | Available | Same day | 6 | 6 | 16.6 | 16.6 | 0.05~1.00 | 0.5 | 1 | 0.1 | 3.16×10-7 | 单膜片 | 紧固螺栓 | |
524,962 VND | 1 Piece(s) | Available | 9 Day(s) | 6.35 | 10 | 28 | 21.5 | 1.01~3.00 | 1.5 | 1.2 | 0.1 | 3.24×10-6 | 单膜片 | 紧固螺栓 | |
524,964 VND | 1 Piece(s) | Available | 9 Day(s) | 6.35 | 6.35 | 28 | 21.5 | 1.01~3.00 | 1.5 | 1.2 | 0.1 | 3.24×10-6 | 单膜片 | 紧固螺栓 | |
524,962 VND | 1 Piece(s) | Available | 9 Day(s) | 6.35 | 8 | 28 | 21.5 | 1.01~3.00 | 1.5 | 1.2 | 0.1 | 3.24×10-6 | 单膜片 | 紧固螺栓 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy