Why does the flange drop during use of a timing pulley?

The function of the flange is to prevent production accidents caused by deviation and drop of the timing belt. Therefore, the flange drops mainly because it is squeezed off by the timing belt that has deviated for a long time. We recommend that the customer regularly check the condition of the timing belt of the equipment to avoid its deviation.

Why does the timing pulley has no threaded hole?

If you have requirements for fixing screws, we recommend that you choose a timing pulley with the shaft hole specification P (round hole + threaded hole) or N·C (keyway hole + threaded hole).

What should be done if there is jitter during use of a timing belt?

Readjust the tension of the timing pulley. Generally, the belt runs unstably due to excessive shaft spacing and insufficient tension.

Why cannot be the threaded hole of a MISUMI aluminum timing pulley locked tightly?

As the aluminum material is relatively soft, slippage may occur if the tightening force is too large during locking. We recommend that the customer stops tightening once an obstruction is felt.

How to fix a timing pulley when the shaft hole specification is H (round hole)?

Generally, H (round hole) can be used only after additional processing. If you need a product that can be directly fixed and used, please choose MISUMI P (round hole + threaded hole) or N (keyway hole + threaded hole) specifications.

What does the number in the timing pulley S2M, S3M, P2M, P3M, T5, T10, 2GT, 3GT, etc. mean?

It mainly represents the tooth pitch of the belt, that is, the distance between two adjacent teeth. They are also the tooth profile models in the timing belt industry.

How to choose a timing belt after selecting a timing pulley?

First, the series must be matched. For example, the timing belts of S2M, S3M, and S5M can only match the timing pulleys of S2M, S3M, and S5M. Then, select the timing belt with an width corresponding to the ones indicated in the timing pulley specifications. Finally, select the needed perimeter.

What does the number in the timing pulley S2M, S3M, P2M, P3M, T5, T10, 2GT, 3GT, etc. mean?

It mainly represents the tooth pitch of the belt, that is, the distance between two adjacent teeth. They are also the tooth profile models in the timing belt industry.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Quote /Order Báo giá /
Đặt hàng

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

Start chat

Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(546 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-HTPA14S5M100-A-H6.35

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Belt Width Used(mm)
10

15

25
ClearTrống
No. of Teeth(T)
14

15

16

18

19

20

22

24

25

26

28

30

32

34

36

40

44

48

50

60

72
ClearTrống
Pulley Shape
- Shape A
- Shape B
ClearTrống
Material
- Aluminum
  - Aluminum Alloy
  - Ultra Super Duralmin Type Aluminum Alloy
ClearTrống
Shaft Bore Dia. d(mm)
5

6

6.35

8

10

11

12

12.7

13

14

15

16

17

18

19

20

21

22

23

24

25

26

28

30

32

35

40

42

55

60
ClearTrống
Shaft Bore Dia. D(mm)
6.35

8

10

12

14

15

16

19

20
ClearTrống
Shaft Hole Shape
- H
- N
- NK
- P
ClearTrống
type
- C-HTPA□□S5M
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

8 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Pulleys S5M

Until 31/03/2025
Volume Discount

Check FAQ of this product (8 items)

Brand :

MiSUMi Economy

Part Number :

C-HTPA14S5M100-A-H6.35 SALE

C-HTPA14S5M100-A-H10 SALE

C-HTPA14S5M100-A-H12 SALE

C-HTPA14S5M100-A-N8 SALE

C-HTPA14S5M100-A-N10 SALE

C-HTPA14S5M100-A-NK10 SALE

C-HTPA14S5M100-A-P5 SALE

C-HTPA14S5M100-A-P6 SALE

C-HTPA14S5M100-A-P6.35 SALE

C-HTPA14S5M100-A-P8 SALE

C-HTPA14S5M100-A-P10 SALE

C-HTPA14S5M100-B-P5 SALE

C-HTPA14S5M100-B-P6.35 SALE

C-HTPA14S5M100-B-P8 SALE

C-HTPA14S5M150-A-N10 SALE

C-HTPA14S5M150-A-P10 SALE

C-HTPA14S5M150-B-P8 SALE

C-HTPA15S5M100-A-N8 SALE

C-HTPA15S5M100-A-N10 SALE

C-HTPA15S5M100-A-NK10 SALE

C-HTPA14S5M100-A-H6.35

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

Timing Pulleys S5M
Timing Pulleys are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Belt Width Used (mm.) : 10, 15 and 20
● Applicable with Belt Type : S5M
● Number of Teeth Minimum/Maximum : 14 and 36
● Shaft Bore Diameter Minimum/Maximum (mm.) : 5 to 30
● Shaft Bore Specs. : Can select between Round Hole, Round Hole + Tap and New JIS keyway + Tap
● Material : Aluminum Alloy
● Surface treatment : Clear Anodized
[Application]
Timing pulleys are frequently utilized in systems that incorporate timing belts to regulate and govern the movement of the machinery.
See more ...

Economy S5M Timing Pulley

Timing pulleysAluminum pulleysPower transmission

- Wide range of teeth counts available.

- Aluminum construction for durability and lightweight

- Clear anodized surface for enhanced corrosion resistance

- Chamfered screw holes for easy on-site assembly and reduced time

- Suitable for medium-precision reciprocating and conveyance systems

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Usually, timing pulleys, timing idlers and timing belts are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of Timing Pulley, timing idlers and timing belts.

Dimensional Drawing

■Standard Tooth Profile	■Pulley Shape
The tooth groove size varies slightly with the number of teeth (Tooth pitch: 3.0 mm)

■Shaft Hole Spec.

Without thread hole	For Shape A pulley, the tapped holes are set around 120° to avoid interference with the tooth top	Detailed Dimensions of Keyway The positions of keyway and teeth are not fixed. When purchasing the new JIS keyway hole + threaded hole with a shaft hole diameter of 10 and a keyway width of 4.0 mm (height 1.8 mm), please specify NK10.

Threaded Hole size table
(Shaft hole specifications: P·N·C)

dH7 Shaft Hole ID	M （Coarse Thread）	Recommended Fixing Screw Model
12	M4	M4×3
13~17	M5	M5×4
18～30	M6	M6×5
31～45	M8	M8×6
46～65	M10	M10×8

Specification Overview

Timing Pulley Material		Surface Treatment
Pulley	Flange

Aluminum Alloy	Aluminum Alloy	Clear Anodized

Specification Table

Part Number			Timing Pulley Shape	Shaft Hole Specs. P Hole Dia. d	P.D.	O.D.	F	E
Type	Number of Teeth	Belt Type
C－HTPA	14	S5M100	A	5·6·6.35·8·10	22.28	21.32	26	16
		S5M150		10
	15	S5M100		5·6·8·10	23.87	22.91	28	18
		S5M150		8·10
	16	S5M100		5·6·6.35·8·10·12	25.46	24.5	32	20
		S5M150		8·10·12
		S5M250		10
	18	S5M100		6.35·8·10·12	28.65	27.69	33	22
		S5M150		8·10·12
	19	S5M100		6·8·10	30.24	29.28	36	24
	20			6·6.35·8·10· 12·13·14·15	31.83	30.87	36	24
		S5M150		6·6.35·8·10·11· 12·12.7·14·15
		S5M250		15
	22	S5M100		8·10·12	35.01	34.05	40	27
		S5M150		8·10·12·15
	24	S5M100		8·10·12·20	38.2	37.24	45	30
		S5M150		8·10·12·14·15
		S5M250		15
	25	S5M100		8·10·12·17	39.79	38.83	45	30
		S5M150		8·10·12·14· 15·18·20
	26	S5M100		8·10·14	41.38	40.42	48	35
		S5M150		8·10·12·14

Part Number			Timing Pulley Shape	Shaft Hole Specs. P Hole Dia. d	P.D.	O.D.	F	E
Type	Number of Teeth	Belt Type
C－HTPA	28	S5M100	A	8·10·12·14	44.56	43.6	48	35
		S5M150		8·10·12·12.7
		S5M250		15
	30	S5M100		10·12	47.75	46.79	52	36
		S5M150		10·12·15
	40	S5M100		10	63.66	62.7	67	50
		S5M150		20
	50	S5M100		12	79.58	78.62	87	67
		S5M150		25

Part Number			Timing Pulley Shape	Shaft Hole Specs.H Hole Dia.d	P.D.	O.D.	F	E
Type	Number of Teeth	Belt Type	Timing Pulley Shape	Shaft Hole Specs.H Hole Dia.d	P.D.	O.D.	F	E
C－HTPA	14	S5M100	A	6.35·10·12	22.28	21.32	26	16
	16			12	25.46	24.5	32	20
	20			16	31.83	30.87	36	24
	20	S5M150		10	31.83	30.87	36	24
	22	S5M100		16·21	35.01	34.05	40	27
	26	S5M100		23	41.38	40.42	48	35
	30	S5M150		32	47.75	46.79	52	36
	50	S5M250		42	79.58	78.62	87	67
	60	S5M100		60	95.49	94.53	99	80

Part Number			Timing Pulley Shape	Shaft Hole Specs.H Hole Dia.d	P.D.	O.D.	F	E
Type	Number of Teeth	Belt Type
C－HTPA	20	S5M150	B	14	31.83	30.87	36	24
	30			10·16	47.75	46.79	52	36

Detailed specifications are available on the official website

Part Number			Timing Pulley Shape	Shaft Hole Specs.N Hole Dia.d	P.D.	O.D.	F	E
Type	Number of Teeth	Belt Type
C－HTPA	14	S5M100	A	8、10、NK10	22.28	21.32	26	16
		S5M150		10
	15	S5M100		8、10、NK10	33.87	22.91	28	18
		S5M150		8、NK10
	16	S5M100		8、10、11、12、NK10	25.46	24.5	32	20
		S5M150		8、10、11、12、NK10
		S5M250		12
	18	S5M100		8、10、11、12、NK10	28.65	27.69	33	22
		S5M150		8、10、11、12、NK10
		S5M250		12
	19	S5M100		8、10、11、12、14、NK10	30.24	29.28	36	24
		S5M150		10、12、14、15
		S5M250		15
	20	S5M100		8、10、11、12、13、14、15、16、NK10	31.83	30.87	36	24
		S5M150		8、10、11、12、13、14、15、16、NK10
		S5M250		12、14、15、16、NK10
	22	S5M100		8、10、11、12、14、15、16、NK10	35.01	34.05	40	27
		S5M150		8、10、11、12、13、14、15、16、17、18、NK10
		S5M250		12、14、15、17、18
	24	S5M100		8、10、11、12、14、15、17、19、20、NK10	38.2	37.24	45	30
		S5M150		8、10、11、12、13、14、15、16、18、19、20、NK10
		S5M250		12、14、15、16、17、19、20
	25	S5M100		8、10、12、14、15、16、18、19	39.79	38.83	45	30
		S5M150		8、10、11、12、14、15、16、17、18、19、20、NK10
		S5M250		10、12、14、15、16、19、20
	26	S5M100		8、10、12、14、15、16、20、NK10	41.38	40.42	48	35
		S5M150		8、10、11、12、14、15、16、18、19、20、22、NK10
		S5M250		12、14、15、16、20、22
	28	S5M100		8、10、12、14、16、20、NK10	44.56	43.6	48	35
		S5M150		8、10、11、12、14、15、16、17、18、19、20、22、NK10
		S5M250		12、14、15、16、18、20
	30	S5M100		10、12、14、15、16、20、NK10	47.75	46.79	52	36
		S5M150		10、12、14、15、16、17、18、19、20、22、24、25、26、NK10
		S5M250		12、14、15、16、17、18、19、20、22、25
	32	S5M100		10、12、14、15、28	50.93	49.97	55	40
		S5M150		10、12、14、15、16、17、18、19、20、22、25、NK10
		S5M250		12、14、15、16、19、20、NK10
	34	S5M100		15	54.11	53.15	61	45
		S5M150		14、15、20、30
		S5M250		20
	36	S5M100		14、18	57.3	56.34	61	45
		S5M150		10、12、14、15、16、20
		S5M250		15、16、17、20、22、25、30
	40	S5M100		10、12、14、16、NK10	63.66	62.7	67	50
		S5M150		10、12、14、15、16、19、20、22、24、30、35
		S5M250		14、15、16、18、20、22、25
	44	S5M100		16	70.03	69.07	74	58
		S5M150		12、15
		S5M250		20、40
	48	S5M100		16	76.39	75.43	83	63
		S5M150		12、14、40
		S5M250		20

Part Number			Timing Pulley Shape	Shaft Hole Specs.N Hole Dia.d	P.D.	O.D.	F	E
Type	Number of Teeth	Belt Type
C－HTPA	50	S5M150	A	12、15、17、20	79.58	78.62	87	67
		S5M250		20、24、32、35
	60	S5M150		12、22、40	95.49	94.53	99	80
		S5M250		20、25、35
	72	S5M150		15、19、55	114.59	113.63	119	100
		S5M250		25、30、55

Part Number			Timing Pulley Shape	Shaft Hole Specs.P Hole Dia.d	P.D.	O.D.	D	F	E
Type	Number of Teeth	Belt Type
C－HTPA	14	S5M100	B	5·6.35·8	22.28	21.32	14	26	16
		S5M150		8
	15	S5M100		8	23.87	22.91	15	28	18
		S5M150		8
	16	S5M100		5·6.35·8·10	25.46	24.5	17	32	20
		S5M150		8
	18	S5M100		8·10	28.65	27.69	19	33	22
		S5M150		8
	20	S5M100		8·10·11	31.83	30.87	19	36	24
		S5M150		8·10
	22	S5M100		8·14	35.01	34.05	24	40	27
		S5M150		8·12.7·14
	24	S5M100		8	38.2	37.24	27	45	30
		S5M150		8·12·14
	25	S5M100		10	39.79	38.83	27	45	30
		S5M150		8
	28	S5M100		8	44.56	43.6	32	48	35
		S5M150		8
	30	S5M100		12	47.75	46.79	33	52	36
		S5M150		12·14
	36	S5M100		10	57.3	56.34	40	61	45

Part Number			Timing Pulley Shape	Shaft Hole Specs.N Hole Dia.d	P.D.	O.D.	D	F	E
Type	Number of Teeth	Belt Type
C－HTPA	16	S5M100	B	8	25.46	24.5	17	32	20
	18			8·10	28.65	27.69	19	33	22
	20			8·10	31.83	30.87	19	36	24
		S5M150		11·12
	22	S5M100		10·12	35.01	34.05	24	40	27
		S5M150		12
	24	S5M100		12·13	38.2	37.24	27	45	30
		S5M150		10·12·14
	25	S5M100		10·12·14·15	39.79	38.83	27	45	30
		S5M150		14·15
		S5M250		14
	26	S5M100		8·12·14·16·17	41.38	40.42	31	48	35
		S5M150		14
		S5M250		14
	28	S5M100		14·15·16	44.45	43.6	32	48	35
		S5M150		14
		S5M250		14
	30	S5M100		12·14·15·16	47.75	46.79	33	52	36
		S5M150		12·14·15·16
		S5M250		14
	32	S5M100		12·14·15·16· 18·19·20	50.93	49.97	37	55	40
		S5M150		14·19·20
		S5M250		20
	34	S5M150		19·25	54.11	53.15	40	61	45
		S5M250		14
	36	S5M100		14	57.3	56.34	40	61	45
		S5M150		15·20·25
		S5M250		15
	40	S5M150		15	63.66	62.7	47	67	50
	44			15	70.03	69.07	50	74	58
	50			25	70.58	78.62	63	87	67
		S5M250		25

Detailed specifications are available on the official website

Product Features

■ Differentiation and use of Misumi economy pulleys and Misumi standard products/customer exmaple of use

	New Products	Existing Products
Example of use
Precautions	Generally used in reciprocating and conveyance mechanisms that do not have high requirements on positioning accuracy.	Generally used in mechanisms that frequently rotate forwardly and reversely and have requirements on positioning accuracy and backlash.
Repetitive positioning accuracy (reference value)	Medium precision (±0.1)	High precision (±0.05)

■Easier on-site assembly
·MISUMI Economy series timing pulley is chamfered at the shaft hole and tapped hole for easy installation, reducing assembly time by 27% compared to the timing pulley not chamfered
MISUMI Timing Pulley Assembly Time

※Generic products on the market are similar products randomly purchased by our company from online or offline markets
※The test result are obtained through testing by our company, which are for reference only

■Longer Timing Belt Life
·MISUMI Economy series timing pulley, with deburring treatment at the threaded hole, is not easy to wear the timing belt, and the price is cheap while increasing the lifetime of the timing belt.

Belt condition after the test of timing belt pulley without chamfer on the threaded hole:

there are obvious wear marks left by the pulley tooth threaded hole on the belt tooth surface.

【Test Condition】
Belt Specification: S5M
Belt Width: 150mm
Number of teeth of
drive side pulley: 20
Number of teeth of
driven side pulley: 60
Rotational speed: 3000rpm
Tension (N): 160N
Test time: 24H

※Problems of generic products on the market

Precautions

Timing PulleyTiming Pulley For hole specifications P (round hole + threaded hole) or N (round hole + keyway hole), the fixing screws are not included, and you may purchase them from MISUMI according to the recommended fixing screw models.

Timing PulleyThere may be no surface treatment in the shaft hole.

Timing PulleyThe positions of keyway and tooth are not fixed.

Usage Method

Usage Method Example Drawing	Usage Method of Timing Wheel and Timing Belt
	①Driving The driven wheel is driven by the driving wheel for transmission
	②Linear driving Reciprocating motion is carried out through the self-end timing toothed belt.

Usage Method Example Drawing	Usage Method of Timing Wheel and Timing Belt
	③Conveyance Plates are conveyed by two timing toothed belts
	④Traction transmission Workpieces are clamped and transmitted by the belt

Timing Pulleys S Type, suitable for MISUMI Standard Timing Belts and Economy Series Timing Belts.

Example of Use

Example drawing of a workpiece reversal transfer mechanism designed using MISUMI timing pulley

■Mechanism name
Workpiece reversal transfer mechanism

■ Mechanism function
Rotates the workpiece on the conveyor belt by 90 degrees and transfers it to the next process.
At this time, the clamping mechanism rotates 180 degrees and does not change the direction of the workpiece relative to the conveying direction at the same time during transfer.

■Role of the Timing Pulley
The transmission of the timing pulley and the timing belt changes the placement direction of the workpiece while transferring the workpiece. (Applicable to S specification and GT specification timing pulleys)

Application Industries

Semiconductor	Automotive	Smart Phones

Medical	Electronic & Electrical	Robotics

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-HTPA14S5M100-A-H6.35SALE
C-HTPA14S5M100-A-H10SALE
C-HTPA14S5M100-A-H12SALE
C-HTPA14S5M100-A-N8SALE
C-HTPA14S5M100-A-N10SALE
C-HTPA14S5M100-A-NK10SALE
C-HTPA14S5M100-A-P5SALE
C-HTPA14S5M100-A-P6SALE
C-HTPA14S5M100-A-P6.35SALE
C-HTPA14S5M100-A-P8SALE
C-HTPA14S5M100-A-P10SALE
C-HTPA14S5M100-B-P5SALE
C-HTPA14S5M100-B-P6.35SALE
C-HTPA14S5M100-B-P8SALE
C-HTPA14S5M150-A-N10SALE
C-HTPA14S5M150-A-P10SALE
C-HTPA14S5M150-B-P8SALE
C-HTPA15S5M100-A-N8SALE
C-HTPA15S5M100-A-N10SALE
C-HTPA15S5M100-A-NK10SALE
C-HTPA15S5M100-A-P5SALE
C-HTPA15S5M100-A-P6SALE
C-HTPA15S5M100-A-P8SALE
C-HTPA15S5M100-A-P10SALE
C-HTPA15S5M100-B-P8SALE
C-HTPA15S5M150-A-N8SALE
C-HTPA15S5M150-A-NK10SALE
C-HTPA15S5M150-A-P8SALE
C-HTPA15S5M150-A-P10SALE
C-HTPA15S5M150-B-P8SALE
C-HTPA16S5M100-A-H12SALE
C-HTPA16S5M100-A-N8SALE
C-HTPA16S5M100-A-N10SALE
C-HTPA16S5M100-A-N11SALE
C-HTPA16S5M100-A-N12SALE
C-HTPA16S5M100-A-NK10SALE
C-HTPA16S5M100-A-P5SALE
C-HTPA16S5M100-A-P6SALE
C-HTPA16S5M100-A-P6.35SALE
C-HTPA16S5M100-A-P8SALE
C-HTPA16S5M100-A-P10SALE
C-HTPA16S5M100-A-P12SALE
C-HTPA16S5M100-B-N8SALE
C-HTPA16S5M100-B-P5SALE
C-HTPA16S5M100-B-P6.35SALE
C-HTPA16S5M100-B-P8SALE
C-HTPA16S5M100-B-P10SALE
C-HTPA16S5M150-A-N8SALE
C-HTPA16S5M150-A-N10SALE
C-HTPA16S5M150-A-N11SALE
C-HTPA16S5M150-A-N12SALE
C-HTPA16S5M150-A-NK10SALE
C-HTPA16S5M150-A-P8SALE
C-HTPA16S5M150-A-P10SALE
C-HTPA16S5M150-A-P12SALE
C-HTPA16S5M150-B-P8SALE
C-HTPA16S5M250-A-N12SALE
C-HTPA16S5M250-A-P10SALE
C-HTPA18S5M100-A-N8SALE
C-HTPA18S5M100-A-N10SALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	RoHS	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Material	Shaft Bore Dia. d (mm)	Shaft Bore Dia. D (mm)	Shaft Hole Shape
88,118 VND 70,494 VND	2 Piece(s)	Available	8 Day(s)	-	10	14	Shape A	[Aluminum] Aluminum Alloy	6.35	-	H
88,118 VND 70,494 VND	2 Piece(s)	Available	8 Day(s)	-	10	14	Shape A	[Aluminum] Aluminum Alloy	10	-	H
88,118 VND 70,494 VND	1 Piece(s)	Available	Same day	-	10	14	Shape A	[Aluminum] Aluminum Alloy	12	-	H
101,154 VND 80,923 VND	1 Piece(s)	Available	Same day	-	10	14	Shape A	[Aluminum] Aluminum Alloy	8	-	N
100,395 VND 80,316 VND	1 Piece(s)	Available	Same day	-	10	14	Shape A	[Aluminum] Aluminum Alloy	10	-	N
97,588 VND 78,070 VND	2 Piece(s)	Available	8 Day(s)	-	10	14	Shape A	[Aluminum] Aluminum Alloy	10	-	NK
98,498 VND 78,798 VND	1 Piece(s)	Available	Same day	-	10	14	Shape A	[Aluminum] Aluminum Alloy	5	-	P
98,498 VND 78,798 VND	1 Piece(s)	Available	Same day	-	10	14	Shape A	[Aluminum] Aluminum Alloy	6	-	P
89,765 VND 71,812 VND	1 Piece(s)	Available	Same day	-	10	14	Shape A	[Aluminum] Aluminum Alloy	6.35	-	P
89,994 VND 71,995 VND	1 Piece(s)	Available	Same day	-	10	14	Shape A	[Aluminum] Aluminum Alloy	8	-	P
98,800 VND 79,040 VND	1 Piece(s)	Available	Same day	-	10	14	Shape A	[Aluminum] Aluminum Alloy	10	-	P
97,353 VND 77,882 VND	1 Piece(s)	Available	Same day	-	10	14	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	5	-	P
80,775 VND 64,620 VND	1 Piece(s)	Available	Same day	-	10	14	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	6.35	6.35	P
80,770 VND 64,616 VND	1 Piece(s)	Available	Same day	-	10	14	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	8	8	P
116,880 VND 93,504 VND	1 Piece(s)	Available	Same day	-	15	14	Shape A	[Aluminum] Aluminum Alloy	10	-	N
93,010 VND 74,408 VND	1 Piece(s)	Available	Same day	-	15	14	Shape A	[Aluminum] Aluminum Alloy	10	-	P
85,342 VND 68,274 VND	1 Piece(s)	Available	Same day	-	15	14	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	8	8	P
102,829 VND 82,263 VND	1 Piece(s)	Available	Same day	-	10	15	Shape A	[Aluminum] Aluminum Alloy	8	-	N
103,058 VND 82,446 VND	1 Piece(s)	Available	Same day	-	10	15	Shape A	[Aluminum] Aluminum Alloy	10	-	N
105,352 VND 84,282 VND	2 Piece(s)	Available	8 Day(s)	-	10	15	Shape A	[Aluminum] Aluminum Alloy	10	-	NK
99,565 VND 79,652 VND	1 Piece(s)	Available	Same day	-	10	15	Shape A	[Aluminum] Aluminum Alloy	5	-	P
99,945 VND 79,956 VND	1 Piece(s)	Available	Same day	-	10	15	Shape A	[Aluminum] Aluminum Alloy	6	-	P
89,545 VND 71,636 VND	1 Piece(s)	Available	Same day	-	10	15	Shape A	[Aluminum] Aluminum Alloy	8	-	P
87,875 VND 70,300 VND	1 Piece(s)	Available	Same day	-	10	15	Shape A	[Aluminum] Aluminum Alloy	10	-	P
85,788 VND 68,630 VND	1 Piece(s)	Available	Same day	-	10	15	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	8	8	P
103,954 VND 83,163 VND	2 Piece(s)	Available	8 Day(s)	-	15	15	Shape A	[Aluminum] Aluminum Alloy	8	-	N
119,319 VND 95,455 VND	1 Piece(s)	Available	Same day	-	15	15	Shape A	[Aluminum] Aluminum Alloy	10	-	NK
97,377 VND 77,902 VND	1 Piece(s)	Available	Same day	-	15	15	Shape A	[Aluminum] Aluminum Alloy	8	-	P
91,077 VND 72,862 VND	1 Piece(s)	Available	Same day	-	15	15	Shape A	[Aluminum] Aluminum Alloy	10	-	P
88,468 VND 70,774 VND	1 Piece(s)	Available	Same day	-	15	15	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	8	8	P
88,118 VND 70,494 VND	2 Piece(s)	Available	8 Day(s)	-	10	16	Shape A	[Aluminum] Aluminum Alloy	12	-	H
101,242 VND 80,994 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	8	-	N
101,470 VND 81,176 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	10	-	N
118,399 VND 94,719 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	11	-	N
118,324 VND 94,659 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	12	-	N
108,835 VND 87,068 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	10	-	NK
91,904 VND 73,523 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	5	-	P
105,797 VND 84,638 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	6	-	P
99,296 VND 79,437 VND	2 Piece(s)	Available	8 Day(s)	-	10	16	Shape A	[Aluminum] Aluminum Alloy	6.35	-	P
90,082 VND 72,066 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	8	-	P
105,113 VND 84,090 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	10	-	P
105,342 VND 84,274 VND	1 Piece(s)	Available	Same day	-	10	16	Shape A	[Aluminum] Aluminum Alloy	12	-	P
112,338 VND 89,870 VND	1 Piece(s)	Available	Same day	-	10	16	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	8	-	N
104,808 VND 83,846 VND	1 Piece(s)	Available	Same day	-	10	16	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	5	-	P
87,023 VND 69,618 VND	1 Piece(s)	Available	Same day	-	10	16	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	6.35	6.35	P
87,017 VND 69,614 VND	1 Piece(s)	Available	Same day	-	10	16	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	8	8	P
104,808 VND 83,846 VND	1 Piece(s)	Available	Same day	-	10	16	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	10	-	P
126,538 VND 101,230 VND	1 Piece(s)	Available	Same day	-	15	16	Shape A	[Aluminum] Aluminum Alloy	8	-	N
108,851 VND 87,081 VND	1 Piece(s)	Available	Same day	-	15	16	Shape A	[Aluminum] Aluminum Alloy	10	-	N
118,780 VND 95,024 VND	2 Piece(s)	Available	8 Day(s)	-	15	16	Shape A	[Aluminum] Aluminum Alloy	11	-	N
109,077 VND 87,262 VND	1 Piece(s)	Available	Same day	-	15	16	Shape A	[Aluminum] Aluminum Alloy	12	-	N
115,908 VND 92,726 VND	1 Piece(s)	Available	Same day	-	15	16	Shape A	[Aluminum] Aluminum Alloy	10	-	NK
97,541 VND 78,033 VND	1 Piece(s)	Available	Same day	-	15	16	Shape A	[Aluminum] Aluminum Alloy	8	-	P
113,632 VND 90,906 VND	1 Piece(s)	Available	Same day	-	15	16	Shape A	[Aluminum] Aluminum Alloy	10	-	P
97,842 VND 78,274 VND	1 Piece(s)	Available	Same day	-	15	16	Shape A	[Aluminum] Aluminum Alloy	12	-	P
88,104 VND 70,483 VND	1 Piece(s)	Available	Same day	-	15	16	Shape B	[Aluminum] Ultra Super Duralmin Type Aluminum Alloy	8	8	P
154,489 VND 123,591 VND	1 Piece(s)	Available	Same day	-	25	16	Shape A	[Aluminum] Aluminum Alloy	12	-	N
146,882 VND 117,506 VND	2 Piece(s)	Available	8 Day(s)	-	25	16	Shape A	[Aluminum] Aluminum Alloy	10	-	P
106,799 VND 85,439 VND	1 Piece(s)	Available	Same day	-	10	18	Shape A	[Aluminum] Aluminum Alloy	8	-	N
106,493 VND 85,194 VND	1 Piece(s)	Available	Same day	-	10	18	Shape A	[Aluminum] Aluminum Alloy	10	-	N

Part Number

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	RoHS	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Material	Shaft Bore Dia. d (mm)	Shaft Bore Dia. D (mm)	Shaft Hole Shape

Loading...Tải…

Basic InformationThông tin cơ bản

Type	Timing Pulleys	Belt Type	S5M	Surface Treatment	Clear Anodize
Timing Pulley / Idler	Pulleys

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Why does the flange drop during use of a timing pulley?: Answer:Answer: The function of the flange is to prevent production accidents caused by deviation and drop of the timing belt. Therefore, the flange drops mainly because it is squeezed off by the timing belt that has deviated for a long time. We recommend that the customer regularly check the condition of the timing belt of the equipment to avoid its deviation.
Question:Question: Why does the timing pulley has no threaded hole?: Answer:Answer: If you have requirements for fixing screws, we recommend that you choose a timing pulley with the shaft hole specification P (round hole + threaded hole) or N·C (keyway hole + threaded hole).
Question:Question: What should be done if there is jitter during use of a timing belt?: Answer:Answer: Readjust the tension of the timing pulley. Generally, the belt runs unstably due to excessive shaft spacing and insufficient tension.
Question:Question: Why cannot be the threaded hole of a MISUMI aluminum timing pulley locked tightly?: Answer:Answer: As the aluminum material is relatively soft, slippage may occur if the tightening force is too large during locking. We recommend that the customer stops tightening once an obstruction is felt.
Question:Question: How to fix a timing pulley when the shaft hole specification is H (round hole)?: Answer:Answer: Generally, H (round hole) can be used only after additional processing. If you need a product that can be directly fixed and used, please choose MISUMI P (round hole + threaded hole) or N (keyway hole + threaded hole) specifications.
Question:Question: What does the number in the timing pulley S2M, S3M, P2M, P3M, T5, T10, 2GT, 3GT, etc. mean?: Answer:Answer: It mainly represents the tooth pitch of the belt, that is, the distance between two adjacent teeth. They are also the tooth profile models in the timing belt industry.
Question:Question: How to choose a timing belt after selecting a timing pulley?: Answer:Answer: First, the series must be matched. For example, the timing belts of S2M, S3M, and S5M can only match the timing pulleys of S2M, S3M, and S5M. Then, select the timing belt with an width corresponding to the ones indicated in the timing pulley specifications. Finally, select the needed perimeter.
Question:Question: What does the number in the timing pulley S2M, S3M, P2M, P3M, T5, T10, 2GT, 3GT, etc. mean?: Answer:Answer: It mainly represents the tooth pitch of the belt, that is, the distance between two adjacent teeth. They are also the tooth profile models in the timing belt industry.

Check other FAQ (5 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Flat-belt idlers, Width (T), 6 to 32 mm	Flat Belts For General Use	High Torque Timing Pulleys S2M Type

Representative model: HBG15-6	Representative model: HBLT350-4.23	Representative model: HTPA48S2M040-B-N10
Advantages: short delivery time, multiple types	Advantage: custom size	Advantages: short delivery time, multiple types