(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product Detail
type
Outer Dia. D
Width B
Tightening Method
Allowable Rotational Speed
Allowable Load
L Dimension
Stud Screw Nominal Thread (M)
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
type
- C-CFFRUCS
-
Outer Dia. D(Ø)
-
Width B(mm)
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head Thread
-
-
Allowable Rotational Speed(rpm)
-
Allowable Load(N)
-
L Dimension(mm)
-
Stud Screw Nominal Thread (M)(mm)
- 3×0.5
- 4×0.7
- 5×0.8
- 6×1.0
- 8×1.25
- 10×1.0
- 12×1.5
- 16×1.5
- 18×1.5
- 20×1.5
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
Specify AlterationsChỉ định thay đổi
Nylon Coated Cam Followers (C-CFFRUCS12-32)
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
- Until 31/12/2024
- Volume Discount
You can add up to 6 items per a category to the compare list.
Brand :
MiSUMi Economy
Filter By :
- All
- Sale Items
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 309,835VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
This is an economy item, The price is cheaper than the MISUMI standard product.
Allowable load is the value when the speed is 10 km/h.
kgf＝N×0.101972
Roller Followers Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten.
Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Allowable load is the value when the speed is 10 km/h.
kgf＝N×0.101972
Specification Table
Allowable load is the value when the speed is 10 km/h.
kgf＝N×0.101972
Dimensional Drawing
Economy Nylon Coated Cam Followers
Corrosion ResistanceNoise ReductionEnhanced Load
- Superior resistance to corrosion due to nylon coating. Ideal for use in environments where metal components may suffer from corrosion, extending operational life.
- Nylon coating helps in reducing operational noise. Effective in minimizing noise during rotation, which is crucial for noise-sensitive applications.
- Even load distribution due to nylon coating. The coating helps in reducing stress concentrations and improving stability during operation.
- Screw with multiple size options
- Capable of handling significant radial loads and high rotational speeds.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Roller Followers Product Overview
The Roller Followers coated with resin material has a certain elasticity. When used as a conveying roller, the elastic sleeve can protect devices that come into contact with the sleeve during high-speed rotation, so it is particularly suitable for conveying fragile devices (such as semiconductors and LCD devices); and resin material is superior in corrosion resistance and wear resistance compared with metal, and when the cam follower is used as a guide roller to substitute a bearing, resin material is more wear-resistant than metal material, and its service life is longer. When the mating side is a curved surface, the contact frictional force between the surface of the resin material and the curved surface is greater, thus allowing the cam follower to swing with respect to the curved surface more stably without sliding. For example, sleeves made of nylon and urethane materials, compared with those made of traditional resin material, have greatly improved hardness while retaining the original excellent properties of elasticity, wear resistance, etc., thereby substituting traditional all-metal cam followers to a certain extent to carry out higher precision operations.
Roller Followers Product Feature
MISUMI's new product with greatly improved performance
1. MISUMI's embedded "Grooving" Roller Followers technology (patent pending). The traditional processing method is changed, and the problem that the resin outer ring is easy to fall off under the conditions of heavy load, partial load and high rotating speed is solved.
2. The test results of multi-angle load running simulation show that the degumming performance of the product is improved by more than 7 times compared with that of similar existing products. (*MISUMI test equipment)
Test Method
Try to make the inclination of the cam follower with resin as zero as possible.
【Roller Followers Material Features】
1. MISUMI's embedded "Grooving" Roller Followers technology (patent pending). The traditional processing method is changed, and the problem that the resin outer ring is easy to fall off under the conditions of heavy load, partial load and high rotating speed is solved.
2. The test results of multi-angle load running simulation show that the degumming performance of the product is improved by more than 7 times compared with that of similar existing products. (*MISUMI test equipment)
Test Method
Try to make the inclination of the cam follower with resin as zero as possible.【Roller Followers Material Features】
| Item | Urethane | MC Nylon |
| Load Resistant | △ | ○ |
| Abrasion Resistant | ○ | △ |
| Mechanical Strength | ○ | ◎ |
| Heat Resistance | × | △ |
| Chemical-Resistant | × | ○ |
Roller Followers Dimensional Drawing
| Roller Followers Type |  Roller Followers Material |  Roller Followers Accessories | |
| With seal | Resin | Cam follower | |
| C－CFFRUCS | Nylon | SUJ2 | 1 hexagon socket nut (S45C·ferroferric oxide protective film) |
■Hex socket on head (d5 to 8)
Operating environment at ambient temperature below 80 ℃.
No grease replenishing hole is provided for d16 and below.
Operating environment at ambient temperature below 80 ℃.No grease replenishing hole is provided for d16 and below.■ Hex Socket on Head Thread (d10~20)
 Roller Followers Type |  dh7 Tolerance |  D Selection | M×Pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUCS | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 238 | 3200 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 350 | 2760 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 406 | 2510 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 460 | 2230 | |
| 8 | 19 | 8×1.25 | 32 | 504 | 1960 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 555 | 1760 | |
| 26 | 10×1.0 | 592 | 1560 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 728 | 1390 | |
| 32 | 12×1.5 | 779 | 1320 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 840 | 1230 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 886 | 1080 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 1044 | 830 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Roller Followers Usage Method
■ Types of Cam Followers
| Roller Followers Intended Use | Noise Proof Transmission | |
| FEATURES | Nylon Coated Type | Urethane Coated Type |
| Product Description |  |  |
| Type with resin press-fit into cam follower. Resin absorbs the impact of the matching side and plays a role in suppressing noise during rotation. | Type with urethane sintered on cam follower. Urethane absorbs the impact of the matching side and plays a role in suppressing noise during rotation. | |
Roller Followers Example of Use
Roller Followers Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten.
Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
| dh7 | Maximum tightening torque N·m |
| 3 | 0.392 |
| 4 | 0.98 |
| 5 | 1.96 |
| 6 | 2.94 |
| 8 | 7.84 |
| 10 | 16.7 |
| 12 | 29.4 |
| 16 | 70.6 |
| 18 | 98 |
| 20 | 137 |
| 24 | 245 |
Roller Followers Precautions
· If the Roller Followers falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Try to make the inclination of the cam follower with resin as zero as possible.
Roller Followers Specification Table· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Try to make the inclination of the cam follower with resin as zero as possible.
| Roller Followers Type | dh7 Tolerance | D Selection | M x pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUCS | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 238 | 3200 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 350 | 2760 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 406 | 2510 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 460 | 2230 | |
| 8 | 19 | 8×1.25 | 32 | 504 | 1960 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 555 | 1760 | |
| 26 | 10×1.0 | 592 | 1560 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 728 | 1390 | |
| 32 | 12×1.5 | 779 | 1320 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 840 | 1230 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 886 | 1080 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 1044 | 830 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Roller Followers Dimensional Drawing
| Roller Followers Type | Material | Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUCS | Nylon | SUJ2 | 1 hexagon socket nut (S45C ferroferric oxide protective film) |
■Hex socket on head (d5 to 8)
Operating environment at ambient temperature below 80 ℃.
No grease replenishing hole is provided for d16 and below.
Operating environment at ambient temperature below 80 ℃.No grease replenishing hole is provided for d16 and below.■ Hex Socket on Head Thread (d10~20)
 Type |  dh7 Tolerance |  D Selection | M x pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUCS | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 238 | 3200 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 350 | 2760 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 406 | 2510 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 460 | 2230 | |
| 8 | 19 | 8×1.25 | 32 | 504 | 1960 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 555 | 1760 | |
| 26 | 10×1.0 | 592 | 1560 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 728 | 1390 | |
| 32 | 12×1.5 | 779 | 1320 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 840 | 1230 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 886 | 1080 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 1044 | 830 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Dimensional Drawing
| Type |  Material |  Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUCS | Nylon | SUJ2 | 1 hexagon socket nut (S45C ferroferric oxide protective film) |
■Hex socket on head (d5 to 8)
Operating environment at ambient temperature below 80 ℃.
No grease replenishing hole is provided for d16 and below.
Operating environment at ambient temperature below 80 ℃.No grease replenishing hole is provided for d16 and below.■ Hex Socket on Head Thread (d10~20)
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| C-CFFRUCS12-32 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Outer Dia. D (Ø) | Width B (mm) | Tightening Method | Allowable Rotational Speed (rpm) | Allowable Load (N) | L Dimension (mm) | Stud Screw Nominal Thread (M) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
389,339 VND 330,938 VND | 1 Piece(s) | Available | Same day | 32 | 14 | Hex Socket on Head Thread | 1320 | 487 | 40 | 12×1.5 |
Loading...Tải…
Basic InformationThông tin cơ bản
| Product Category | Cam Followers | Roller Type | Cylindrical Outer Ring | Cam Follower Type | Plastic |
|---|---|---|---|---|---|
| Size Standards | Metric System | Shaft | Provided | Roller Guiding Method | With Retainer |
| Seal | Provided | Application | Rolling Transmission Shock Absorber | Cam Follower Type | Flat Type |
Please check the type/dimensions/specifications of the part C-CFFRUCS12-32 in the Nylon Coated Cam Followers series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần C-CFFRUCS12-32 trong chuỗi Nylon Coated Cam Followers.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: Mounting Method
- Answer:Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
- Question:Question: Applicable load of cam follower
- Answer:Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
- Question:Question: Usage difference of different O.D. shapes of outer ring
- Answer:Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Products like this...
| Part Number |
|---|
| C-CFFRUCS10-22 |
| C-CFFRUCS10-26 |
| C-CFFRUCS12-30 |
| C-CFFRUCS16-35 |
| C-CFFRUCS18-40 |
| C-CFFRUCS20-52 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Outer Dia. D (Ø) | Width B (mm) | Tightening Method | Allowable Rotational Speed (rpm) | Allowable Load (N) | L Dimension (mm) | Stud Screw Nominal Thread (M) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
309,835 VND | 1 Piece(s) | Available | Same day | 22 | 12 | Hex Socket on Head Thread | 1760 | 347 | 36 | 10×1.0 | |
357,389 VND | 1 Piece(s) | Available | Same day | 26 | 12 | Hex Socket on Head Thread | 1560 | 370 | 36 | 10×1.0 | |
361,750 VND | 1 Piece(s) | Available | Same day | 30 | 14 | Hex Socket on Head Thread | 1390 | 455 | 40 | 12×1.5 | |
465,363 VND | 1 Piece(s) | Available | Same day | 35 | 18 | Hex Socket on Head Thread | 1230 | 525 | 52 | 16×1.5 | |
512,234 VND | 1 Piece(s) | Available | Same day | 40 | 20 | Hex Socket on Head Thread | 1080 | 554 | 58 | 18×1.5 | |
658,631 VND | 1 Piece(s) | Available | Same day | 52 | 24 | Hex Socket on Head Thread | 830 | 653 | 66 | 20×1.5 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy