What kind of thread does model C-AC0806H match?

Buffer model C-AC0806H, product with M8 thread and 6 mm stroke, where the thread type is M8X1.0, please note that the product is fine thread.

Is the model C-AC0806L a product with a lid, is the lid connected with thread?

Buffer model C-AC0806L, the lid is press-fit type, not of thread connection, and cannot be disassembled by yourself.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(28 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-AC0806S

Stroke Nominal Mounting Screw [M] Max. Absorbed Energy Body Material Max. Collision Velocity Overall Length Equivalent Mass Max. Absorbed Energy (per Minute) Cap Mating Accessories 1 - Stopper Nut type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Stroke(mm)
6

7

10

12

15

25
ClearTrống
Nominal Mounting Screw [M]
8

10

12

14

20

25

27
ClearTrống
Max. Absorbed Energy(J)
3

6

12

20

59

105

147
ClearTrống
Body Material
- Steel
  - STKM12C
  - 12L14
ClearTrống
Max. Collision Velocity(m/s)
2.5

3.5

5
ClearTrống
Overall Length(mm)
46

52

54.5

62.5

63

71.5

79.5

88

91.5

103.8

123

141.5
ClearTrống
Equivalent Mass(kgf)
6

12

25

40

120

220

270
ClearTrống
Max. Absorbed Energy (per Minute)(J/min)
116

206

341

550

635

950

1200
ClearTrống
Cap
- Not Provided
- Provided
ClearTrống
Mating Accessories 1 - Stopper Nut
- Not Provided
- Provided
ClearTrống
type
- C-AC□□□□S
- C-AC□□□□S-N
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

8 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Shock Absorbers, Preset(Fixed) Damping, Two-Stage Absoption Type (Part Number)

Volume Discount

Check FAQ of this product (2 items)

Brand :

MiSUMi Economy

Part Number :

C-AC0806S

C-AC0806S-N

C-AC0806S-N-SC

C-AC0806S-SC

C-AC1007S

C-AC1007S-N

C-AC1007S-N-SC

C-AC1007S-SC

C-AC1210S

C-AC1210S-N

C-AC1210S-N-SC

C-AC1210S-SC

C-AC1412S

C-AC1412S-N

C-AC1412S-N-SC

C-AC1412S-SC

C-AC2015S

C-AC2015S-N

C-AC2015S-N-SC

C-AC2015S-SC

C-AC0806S

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

- Shock Absorbers, Two-Stage Absoption Typefrom MISUMI
- Simple structure and easy installation.
- Miniaturized design and strong space adaptability.
- Absorb energy smoothly and softly.
- Extend mechanical life, The service life of Shock Absorbers from MISUMI is up to 800,000 times.
- Max. Collision Velocity(m/s): 5 m/s
- Operating Environment Temperature: -5 to 70℃
- The products of M08 to M14 are equipped with two anti-loosening washers, and the mounting hole effectively prevents loosening without tapping.

Economy Shock Absorbers

Two-Stage AbsorptionCompact DesignNoise Reduction

- Shock absorbers feature a unique two-stage absorption system that provides smooth and controlled energy dissipation.

- With a miniaturized design, MISUMI's shock absorbers can be easily integrated into various equipment without compromising space. This flexibility makes them suitable for a wide range of applications.

- Built to withstand a high number of cycles.

- By absorbing impact energy, MISUMI's shock absorbers significantly reduce noise levels, creating a quieter working environment.

- Capable of handling high maximum collision velocities.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Fixed Type Simple structure, commonly used in the mechanism to absorb impact energy. The product is not adjustable. Different buffering characteristics can be obtained by changing the size of the internaloverflow hole, the number and position of the overflow hole.
Depending on different collision velocities, there are high speed (H), medium speed (M),and low speed (L). There are single hole overflow type and multiple hole overflow type according to the change in the overflow area.

The advantages of using Fixed Type:
1. Improve production efficiency: equipment can be operated at high frequency and high speed to improve production efficiency because the Fixed Type can stop the impact object smoothly.
2. Extend mechanical life: the buffer can absorb the energy generated by the impact, greatly reduce the impact and vibration caused by the object to the machine, and avoid damage due to impact vibration.
3. Improve product quality: the buffer eliminates the shock caused by impact objects and the damaging impact, allowing the smooth operation of the machine and equipment, and improving the product quality.
4. Significantly reduce noise, and provide a quiet working environment.
5. Improve the safety of mechanical running.
Economical hydraulic shock absorber fixed type

Economical hydraulic shock absorber fixed type

Dimensional Drawing

Specification Overview

■Product features
·Simple structure, strong stability
·Soft cushioning effect throughout the entire stroke

■ The products Fixed Type are divided into

Collision Velocity Type	Maximum Collision Velocity	Operating environment temperature	Reference number of replacements
Two-stage	～5.0m/s	-5~70℃	800,000 cycles

■Product material

Mounting Screw Nominal (M)	Material		Surface Treatment
M8～M12	Body	12L14	Black oxide
M14～M27	Body	STKM11A
M8	Cap	Nylon
M10～M27	Cap	Urethane

Stopper Nut
It can be used with both cap and capless type of Shock Absorbers. Setting buffer improves the service life of the Absorber.

Specification	Mounting Screw Nominal	S	H	L	Shock Absorber Type
Specification	M	mm	mm	mm	Fixed	Two-stage	Adjusting	Heavy Load Absorption
Stopper Nut	M8×1.0	11	12.6	14	○	○	None	None
	M10×1.0	12.7	14.5	16	○	○	None	None
	M12×1.0	14	16	20	○	○	○	None
	M14×1.5	19	21.6	27	○	○	○	None
	M16×1.5	19	21.6	27	None	None	○	None
	M20×1.5	26	29.7	35	○	○	○	None
	M25×1.5	32	36.7	45	○	○	○	None
	M25×1.5	32	36.7	65	○	None	○	None
	M27×1.5	32	36.7	45	None	○	○	None
	M36×1.5	46	53	80	○	None	○	None
	M42×1.5	50	57.7	100	None	None	None	○

※ The stopper nut must be ordered together with the shock absorber, and cannot be ordered separately.

Specification Table

Part Number		Cap	Stopper Nut	Mounting Screw Nominal (M)	Stroke (S)	Max. Energy Absorbed (E')		Max. Equivalent Mass (me') (kg)	Max.Collision Velocity (M/S)	Total Length (L)		L₁	L₂	T	t	d	d₁	B (Both Surface Width)
Type	No.	Cap	Stopper Nut	Mounting Screw Nominal (M)	Stroke (S)	Per Cycle (J)	Per Minute (J)	Max. Equivalent Mass (me') (kg)	Max.Collision Velocity (M/S)	Cap provided	Cap not provided	L₁	L₂	T	t	d	d₁	B (Both Surface Width)
C－AC	0806S	None (Not provided) N (Provided	None (Not provided) SC (Provided)	M8×1.0	6.0	3.0	116.0	6.0	2.5	52.0	46.0	34.5	5.5	4.0	6.0	6.0	2.9	11.0
	1007S			M10×1.0	7.0	6.0	206.0	12.0	3.5	63.0	54.5	42.5	5.0	4.0	8.5	8.5	3.0	12.9
	1210S			M12×1.0	10.0	12.0	341.0	25.0	5.0	71.5	62.5	46.5	6.0	4.0	9.0	10.5	3.0	14.0
	1412S			M14×1.5	12.0	20.0	550.0	40.0	5.0	91.5	79.5	62.5	5.0	5.0	12.0	11.8	4.0	19.0
	2015S			M20×1.5	15.0	59.0	635.0	120.0	5.0	103.8	88.0	66.0	7.0	8.0	15.8	18.0	6.0	26.0
	2525S			M25×1.5	25.0	105.0	950.0	220.0	5.0	141.5	123.0	90.0	8.0	10.0	18.5	22.0	8.0	32.0
	2725S			M27×1.5	25.1	147.0	1200.0	270.0	5.0	141.5	123.0	90.0	8.0	10.0	18.5	22.0	8.0	32.0

M4 to M14 shock absorbers are equipped with 2 anti-loosening washer.

Product Features

1. Fixed Type Simple structure and easy installation.
2. Fixed Type miniaturized design and strong space adaptability.
3. Fixed Type absorb energy smoothly and softly.
4. Fixed Type, Abundant stock and fast delivery.
5. Fixed Type has long life with 800,000 times being used for reference.
6. The products Fixed Type of M08 to M14 are equipped with two anti-loosening washers, and the mounting hole effectively prevents loosening without tapping.
Shock Absorbers, Two-Way Type - Feature Drawing

Shock Absorbers, Two-Way Type - Feature Drawing

Precautions

1. Fixed Type, Do not exceed the specified locking torque value during installation as shown in the following table for details:

Coarse Outer Diameter (mm)	M4ⅹ0.5	M6ⅹ0.75	M8ⅹ1.0	M10ⅹ1.0	M12ⅹ1.0	M14ⅹ1.5	M20ⅹ1.5	M25ⅹ1.5	M36ⅹ1.5	M42ⅹ1.5
Tightening torque of nut (N.m)	0.35	0.85	3.9	7.8	7.8	9.8	29.4	49	98	392

2. Fixed Type, Pay attention to check whether the head circlip is off.
■ Overloaded buffer will cause abnormal increase in the internal pressure of the buffer tube, making the head circlip off, and internal parts may pop up and cause injury.
■ When the buffer with the head circlip is working, please keep your face and other parts away from it.

3. Fixed Type, Please pay attention to the splash of the broken buffer head due to impact.
■ Overload use will cause damage to the head, resulting in injury.
■ It is recommended to install an anti-splashing cover.

4. Fixed Type, Please pay attention to lateral misalignment load and lateral misalignment angle.
■ When the lateral misalignment load exceeds ±2.5 degrees, it will cause piston rod bending, bad reset, and internal lateral misalignment friction, resulting in performance degradation and even product breakage.
Please aim at the center line of the buffer piston rod for impact. (If the lateral misalignment angle is greater than ±2.5 degrees, please use the angular misalignment absorber (the range of lateral misalignment:± within 10 degrees)

5. Fixed Type, Operating Temperature Range
■ Please use the buffer within the specified temperature range.
▪ Use outside the specified range will reduce the life of the seal packing and the pressure accumulating sponge, and cause the buffer to break.

6. Fixed Type, Operating Environment Requirements
■ Please do not use it under medium or high pressure in a vacuum environment.
■ Keep the guide shaft clean, and avoid cutting powder, cutting fluid, water, etc. from being attached to the guide shaft, otherwise it will cause seal damage, oil leakage, poor buffer action, and buffer damage.
※ If you need to use it in the cutting fluid environment, please choose Misumi’s cutting fluid resistant buffer series products. See Misumi's official website.

7. Fixed Type, The buffering oil inside the buffer will cause pollution to the environment, and can not be handled at will. Please follow the pollutant treatment method for treatment.

8. Fixed Type, To prevent the buffer from increasing lateral load, the distance between the installation position of the buffer and the fulcrum should be equal to or greater than 6 times of the buffer stroke.
And when the side load and the buffer center line form an angle of 5°, the absorbed energy is the maximum.

MISUMI Economic type Oil Buffers Fixed Type

Example of Use

Drawings of Examples of Use are for informational purposes only

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 60; 90

Part Number
C-AC0806S
C-AC0806S-N
C-AC0806S-N-SC
C-AC0806S-SC
C-AC1007S
C-AC1007S-N
C-AC1007S-N-SC
C-AC1007S-SC
C-AC1210S
C-AC1210S-N
C-AC1210S-N-SC
C-AC1210S-SC
C-AC1412S
C-AC1412S-N
C-AC1412S-N-SC
C-AC1412S-SC
C-AC2015S
C-AC2015S-N
C-AC2015S-N-SC
C-AC2015S-SC
C-AC2525S
C-AC2525S-N
C-AC2525S-N-SC
C-AC2525S-SC
C-AC2725S
C-AC2725S-N
C-AC2725S-N-SC
C-AC2725S-SC

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Stroke (mm)	Nominal Mounting Screw [M]	Max. Absorbed Energy (J)	Body Material	Max. Collision Velocity (m/s)	Overall Length (mm)	Equivalent Mass (kgf)	Max. Absorbed Energy (per Minute) (J/min)	Cap	Mating Accessories 1 - Stopper Nut
284,871 VND	1 Piece(s)	Available	Same day	6	8	3	[Steel] 12L14	2.5	52	6	116	Provided	Not Provided
284,866 VND	1 Piece(s)	Available	Same day	6	8	3	[Steel] 12L14	2.5	46	6	116	Not Provided	Not Provided
323,931 VND	1 Piece(s)	Available	8 Day(s)	6	8	3	-	-	-	-	-	Not Provided	Provided
323,933 VND	1 Piece(s)	Available	8 Day(s)	6	8	3	-	-	-	-	-	Provided	Provided
285,652 VND	1 Piece(s)	Available	Same day	7	10	6	[Steel] 12L14	3.5	63	12	206	Provided	Not Provided
285,649 VND	1 Piece(s)	Available	Same day	7	10	6	[Steel] 12L14	3.5	54.5	12	206	Not Provided	Not Provided
324,708 VND	1 Piece(s)	Available	8 Day(s)	7	10	6	-	-	-	-	-	Not Provided	Provided
324,709 VND	1 Piece(s)	Available	8 Day(s)	7	10	6	-	-	-	-	-	Provided	Provided
285,700 VND	1 Piece(s)	Available	Same day	10	12	12	[Steel] 12L14	5	71.5	25	341	Provided	Not Provided
285,697 VND	1 Piece(s)	Available	Same day	10	12	12	[Steel] 12L14	5	62.5	25	341	Not Provided	Not Provided
333,956 VND	1 Piece(s)	Available	8 Day(s)	10	12	12	-	-	-	-	-	Not Provided	Provided
333,957 VND	1 Piece(s)	Available	8 Day(s)	10	12	12	-	-	-	-	-	Provided	Provided
332,917 VND	1 Piece(s)	Available	Same day	12	14	20	[Steel] STKM12C	5	91.5	40	550	Provided	Not Provided
332,905 VND	1 Piece(s)	Available	Same day	12	14	20	[Steel] STKM12C	5	79.5	40	550	Not Provided	Not Provided
389,395 VND	1 Piece(s)	Available	8 Day(s)	12	14	20	-	-	-	-	-	Not Provided	Provided
389,392 VND	1 Piece(s)	Available	8 Day(s)	12	14	20	-	-	-	-	-	Provided	Provided
526,804 VND	1 Piece(s)	Available	Same day	15	20	59	[Steel] STKM12C	5	103.8	120	635	Provided	Not Provided
526,758 VND	1 Piece(s)	Available	Same day	15	20	59	[Steel] STKM12C	5	88	120	635	Not Provided	Not Provided
615,682 VND	1 Piece(s)	Available	8 Day(s)	15	20	59	-	-	-	-	-	Not Provided	Provided
615,696 VND	1 Piece(s)	Available	8 Day(s)	15	20	59	-	-	-	-	-	Provided	Provided
565,342 VND	1 Piece(s)	Available	Same day	25	25	105	[Steel] STKM12C	5	141.5	220	950	Provided	Not Provided
565,276 VND	1 Piece(s)	Available	Same day	25	25	105	[Steel] STKM12C	5	123	220	950	Not Provided	Not Provided
694,328 VND	1 Piece(s)	Available	8 Day(s)	25	25	105	-	-	-	-	-	Not Provided	Provided
694,348 VND	1 Piece(s)	Available	8 Day(s)	25	25	105	-	-	-	-	-	Provided	Provided
580,616 VND	1 Piece(s)	Available	Same day	25	27	147	[Steel] STKM12C	5	141.5	270	1200	Provided	Not Provided
580,563 VND	1 Piece(s)	Available	Same day	25	27	147	[Steel] STKM12C	5	123	270	1200	Not Provided	Not Provided
728,981 VND	1 Piece(s)	Available	8 Day(s)	25	27	147	-	-	-	-	-	Not Provided	Provided
728,998 VND	1 Piece(s)	Available	8 Day(s)	25	27	147	-	-	-	-	-	Provided	Provided

Loading...Tải…

Basic InformationThông tin cơ bản

Main Body, Related Components	Main Body	Structure	Fixed Type	Orifice Type	Multi Orifice
Operating Environment	Standard	Operating Temperature Range(°C)	-5::70

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What kind of thread does model C-AC0806H match?: Answer:Answer: Buffer model C-AC0806H, product with M8 thread and 6 mm stroke, where the thread type is M8X1.0, please note that the product is fine thread.
Question:Question: Is the model C-AC0806L a product with a lid, is the lid connected with thread?: Answer:Answer: Buffer model C-AC0806L, the lid is press-fit type, not of thread connection, and cannot be disassembled by yourself.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Stroke(mm)

Nominal Mounting Screw [M]

Max. Absorbed Energy(J)

Body Material

Max. Collision Velocity(m/s)

Overall Length(mm)

Equivalent Mass(kgf)

Max. Absorbed Energy (per Minute)(J/min)

Cap

Mating Accessories 1 - Stopper Nut

type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Shock Absorbers, Preset(Fixed) Damping, Two-Stage Absoption Type (Part Number)

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Economy Shock Absorbers

Part Number

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng