What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What standard does the vibration class of this bearing meet?

The vibration class of the bearing is above Z1

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Quote /Order Báo giá /
Đặt hàng

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译此翻譯是Google翻譯

Start chat

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 23/3 to 6:00 (ICT) 24/3/2025. We apologize for the inconvenience.
Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(24 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-EFL603ZZ

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inner Dia. d(Ø)
3

4

5

6

8
ClearTrống
Outer Dia. D(Ø)
6

7

8

9

10

11

12

13

14

15

16

17

19

22
ClearTrống
Width B (or T)(mm)
2.5

3

3.5

4

5

6

7
ClearTrống
Basic Load Rating Cr (Dynamic)(N)
146

152

155

273

326

361

392

399

441

448

501

670

756

910

931

945

1127

1210

1393

1533

1635

2345
ClearTrống
type
- C-EFL6□□ZZ
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day
ClearTrống

Specify AlterationsChỉ định thay đổi

Flanged Small Ball Bearings

Name: Flanged Small Ball Bearings
Brand: MISUMI
Availability: InStock

Move the mouse over or click the image to zoom

Until 31/03/2025
Volume Discount

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-EFL603ZZ SALE

C-EFL604ZZ SALE

C-EFL605ZZ SALE

C-EFL606ZZ SALE

C-EFL608ZZ SALE

C-EFL623ZZ SALE

C-EFL624ZZ SALE

C-EFL625ZZ SALE

C-EFL626ZZ SALE

C-EFL673ZZ SALE

C-EFL674ZZ SALE

C-EFL675ZZ SALE

C-EFL676ZZ SALE

C-EFL678ZZ SALE

C-EFL683ZZ SALE

C-EFL684ZZ SALE

C-EFL685ZZ SALE

C-EFL686ZZ SALE

C-EFL688ZZ SALE

C-EFL693ZZ SALE

C-EFL603ZZ

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
The requirements of vibration class Z1 of the industry are met at ultra-low price

Product Description

Flanged Small Ball Bearings
Flanged small ball bearings are commonly used in applications such as dental handpieces and miniature pumps. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter Minimum / Maximum (mm.) : 10 and 50
● Outer Diameter Minimum / Maximum (mm.) : 26 and 110
● Width Minimum / Maximum (mm.) : 8 and 27
● Precision (JIS) : Class 0
● Bearing Type : Closed (Double Shielded (ZZ))
● Load Direction : Radial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Flanged Small Ball Bearing

ReliabilityHigh Speed CapabilityLow Torque

- Bearing Type: Deep groove ball bearing with a flange for added support.

- Material: Made of SUJ2 steel for durability and performance.

- Size Range: Compact size with inner diameters in specified range.

- High Speed Capability: Suitable for high-speed applications due to small size.

- Basic Load Capacity: Handles moderate radial loads for small-sized applications.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product of Ball Bearings Overview

・ Light load, medium · low speed, special for medium precision rotation, realizing ultra-low price.
・ Ball Bearings It is made of industry standard bearing steel with high surface hardness and wear resistance.
・ The vibration class of the product of Ball Bearings is above Z1

Product of Ball Bearings Feature

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ In addition to the open type Ball Bearings, there are bearings with steel dust cover, bearings with contact rubber seal packing and bearings with non-contact rubber seal packing, or bearings with stop ring on the outer diameter of outer ring.
・ Ball Bearings with dust cover or seal packing are sealed with proper amount of high-quality grease. Deep groove ball bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

Dimensiona Ball Bearingsl Drawing

Product Dimensional Drawing
(Economic type) Small diameter deep groove ball bearing with flange Double shielded

Example of Ball Bearings Use

Ball Bearings Motor
1 Motor

Ball Bearings Gear unit
2 Gear unit

Ball Bearings Machine tool
3 Machine tool

Precautions Ball Bearings

When the precision of the shaft and Ball Bearings housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Ball Bearings heater
Bearing heater

Proper installation of the bearing heater can guarantee a long life of the bearing.
Rolling Ball Bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Ball Bearings puller
Bearing puller

When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly.
(a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
(b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
(c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Specification Ball Bearings Table

Key points of economy series parts confirmation ①

Inner Diameter d (mm)		Clearance of MISUMI quality products of Ball Bearings (μm)		Clearance of economy series products of Ball Bearings (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Less than 10		5	10	7	15

Part Number	d	D	B	D₁	C	r (min.)	Key points of economy series parts confirmation ② Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions		Weight (g) (Reference)
										Ds (min.)	R (max.)
							Cr (Dynamic) N	Cor (Static) N		Ds (min.)	R (max.)
C－EFL673ZZ	3	6	2.5	7.2	0.6	0.1	146	52	8000	3.6	0.08	0.33
C－EFL683ZZ		7	3	8.1	0.8	0.1	273	91		3.9	0.1	0.53
C－EFL693ZZ		8	4	9.5	0.9	0.15	392	125		4.2	0.15	0.97
C－EFL603ZZ		9	5	10.5	1	0.15	399	131				1.63
C－EFL623ZZ		10	4	11.5	1	0.15	441	153				1.86
C－EFL674ZZ	4	7	2.5	8.2	0.6	0.1	155	62		4.6	0.08	0.35
C－EFL684ZZ		9	4	10.3	1	0.1	448	157		5	0.1	1.14
C－EFL694ZZ		11		12.5	1	0.15	501	193		5.2	0.15	1.96
C－EFL604ZZ		12		13.5		0.2	670	242		5.6	0.2	2.53
C－EFL624ZZ		13	5	15		0.2	910	340			0.2	3.53
C－EFL675ZZ	5	8	2.5	9.2	0.6	0.1	152	64			0.08	0.41
C－EFL685ZZ		11	5	12.5	1	0.15	501	197		6.2	0.15	2.18
C－EFL695ZZ		13	4	15		0.2	756	301		6.6	0.2	2.84
C－EFL605ZZ		14	5	16		0.2	931	354		6.6	0.2	3.85
C－EFL625ZZ		16	5	18		0.3	1,210	469		7.7	0.3	5.3
C－EFL676ZZ	6	10	3	11.2	0.6	0.1	326	137		6.6	0.1	0.77
C－EFL686ZZ		13	5	15	1.1	0.15	756	308		7	0.15	3.04
C－EFL696ZZ		15	5	17	1.2	0.2	945	371		7.6	0.2	4.26
C－EFL606ZZ		17	6	19	1.2	0.3	1,533	585		8	0.3	6.61
C－EFL626ZZ		19	6	22	1.5	0.3	1,635	620		8	0.3	9.09
C－EFL678ZZ	8	12	3.5	13.6	0.8	0.1	361	176		8.8	0.1	1.15
C－EFL688ZZ		16	5	18	1.1	0.2	1,127	497		9.6	0.2	4.47
C－EFL698ZZ		19	6	22	1.5	0.3	1,393	606		10	0.3	8.3
C－EFL608ZZ		22	7	25	1.5	0.3	2,345	980		10	0.3	13

kgf＝N×0.101972

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-EFL603ZZSALE
C-EFL604ZZSALE
C-EFL605ZZSALE
C-EFL606ZZSALE
C-EFL608ZZSALE
C-EFL623ZZSALE
C-EFL624ZZSALE
C-EFL625ZZSALE
C-EFL626ZZSALE
C-EFL673ZZSALE
C-EFL674ZZSALE
C-EFL675ZZSALE
C-EFL676ZZSALE
C-EFL678ZZSALE
C-EFL683ZZSALE
C-EFL684ZZSALE
C-EFL685ZZSALE
C-EFL686ZZSALE
C-EFL688ZZSALE
C-EFL693ZZSALE
C-EFL694ZZSALE
C-EFL695ZZSALE
C-EFL696ZZSALE
C-EFL698ZZSALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
18,453 VND 14,762 VND	1 Piece(s)	Available	Same day	3	9	5	399	131	1.63
17,620 VND 14,096 VND	1 Piece(s)	Available	Same day	4	12	4	670	242	2.53
20,508 VND 16,406 VND	1 Piece(s)	Available	Same day	5	14	5	931	354	3.85
17,632 VND 14,106 VND	1 Piece(s)	Available	Same day	6	17	6	1533	585	6.61
21,148 VND 16,918 VND	1 Piece(s)	Available	Same day	8	22	7	2345	980	13
20,046 VND 16,037 VND	1 Piece(s)	Available	Same day	3	10	4	441	153	1.86
17,623 VND 14,098 VND	1 Piece(s)	Available	Same day	4	13	5	910	340	3.53
17,628 VND 14,102 VND	1 Piece(s)	Available	Same day	5	16	5	1210	469	5.3
18,477 VND 14,782 VND	1 Piece(s)	Available	Same day	6	19	6	1635	620	9.09
22,927 VND 18,342 VND	1 Piece(s)	Available	Same day	3	6	2.5	146	52	0.33
21,256 VND 17,005 VND	1 Piece(s)	Available	Same day	4	7	2.5	155	62	0.35
22,546 VND 18,037 VND	1 Piece(s)	Available	Same day	5	8	2.5	152	64	0.41
22,547 VND 18,038 VND	1 Piece(s)	Available	Same day	6	10	3	326	137	0.77
23,309 VND 18,647 VND	1 Piece(s)	Available	Same day	8	12	3.5	361	176	1.15
17,235 VND 13,788 VND	1 Piece(s)	Available	Same day	3	7	3	273	91	0.53
17,540 VND 14,032 VND	1 Piece(s)	Available	Same day	4	9	4	448	157	1.14
17,163 VND 13,730 VND	1 Piece(s)	Available	Same day	5	11	5	501	197	2.18
17,547 VND 14,038 VND	1 Piece(s)	Available	Same day	6	13	5	756	308	3.04
18,082 VND 14,466 VND	1 Piece(s)	Available	Same day	8	16	5	1127	497	4.47
19,664 VND 15,731 VND	1 Piece(s)	Available	Same day	3	8	4	392	125	0.97
19,668 VND 15,734 VND	1 Piece(s)	Available	Same day	4	11	4	501	193	1.96
20,278 VND 16,222 VND	1 Piece(s)	Available	Same day	5	13	4	756	301	2.84
20,509 VND 16,407 VND	1 Piece(s)	Available	Same day	6	15	5	945	371	4.26
17,640 VND 14,112 VND	1 Piece(s)	Available	Same day	8	19	6	1393	606	8.3

Part Number

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)

Loading...Tải…

Basic InformationThông tin cơ bản

Raceway Ring Shape	Ball	Bearing Type	Double Shielded	Outer Ring Type	With Flange
Inner/Outer Ring Material	SUJ2 Equiv.	Specifications, Environment	Standard / Dust Resistant	Precision (JIS)	Class 0
Load Direction	Radial	Rolling Element Material	SUJ2	Size Standards	Metric System
Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What is the difference between ball bearing and roller bearing?: Answer:Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question:Question: What is the classification of bearings according to the shape of rolling elements?: Answer:Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question:Question: What is the classification of bearings according to load direction?: Answer:Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question:Question: What standard does the vibration class of this bearing meet?: Answer:Answer: The vibration class of the bearing is above Z1

Check other FAQ (1 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh