What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What is the basic rated life of rolling bearings?

The basic rated life of rolling bearings refers to the total number of revolutions that 90% of the ball bearings can rotate without peeling when eleven groups of ball bearings of the same kind and specification rotate respectively under the same conditions.

Can double shielded stainless steel deep groove ball bearings be directly used in corrosive environment?

The antirust performance of the material of double shielded stainless steel deep groove ball bearings is weaker than that of SUS3XX series stainless steel. Do not use it directly in corrosive environment.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(60 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-SE6000ZZ

Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) Specifications, Environment Load Direction type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inner Dia. d(Ø)
10

12

15

17

20

25

30

35

40

45

50
ClearTrống
Outer Dia. D(Ø)
15

18

19

21

22

23

24

26

27

28

30

32

35

37

40

42

47

52

55

58

62

65

68

72

75

80

85

90

100

110
ClearTrống
Width B (or T)(mm)
4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

23

25

27
ClearTrống
Basic Load Rating Cr (Dynamic)(N)
408

434

442

476

663

867

969

1046

1131

1360

1462

2032

2176

2185

2304

2321

2593

2831

3026

3222

3332

3443

3857

3868

4020

4089

4185

4752

4837

4905

5109

5259

5619

5780

6477

6843

8024

9265

9877

10404

11220

11626

11985

12359

13600

14280

17765

18530

21845

22695

24735

26775

28475

29750

34425

45050

52700
ClearTrống
Specifications, Environment
- Standard
- Dust Resistant
- High Rotational Speed
ClearTrống
Load Direction
- Radial
- Thrust Load, Axial
ClearTrống
type
- C-SE60
- C-SE62
- C-SE63
- C-SE67
- C-SE68
- C-SE69
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day
ClearTrống

Specify AlterationsChỉ định thay đổi

Ball Bearings Stainless Steel

Name: Ball Bearings Stainless Steel
Brand: MISUMI
Availability: InStock

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Until 31/12/2024
Volume Discount

Check FAQ of this product (5 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-SE6000ZZ SALE

C-SE6001ZZ SALE

C-SE6002ZZ SALE

C-SE6003ZZ SALE

C-SE6004ZZ SALE

C-SE6005ZZ SALE

C-SE6006ZZ SALE

C-SE6007ZZ SALE

C-SE6008ZZ SALE

C-SE6009ZZ SALE

C-SE6010ZZ SALE

C-SE6200ZZ SALE

C-SE6201ZZ SALE

C-SE6202ZZ SALE

C-SE6203ZZ SALE

C-SE6204ZZ SALE

C-SE6205ZZ SALE

C-SE6206ZZ SALE

C-SE6207ZZ SALE

C-SE6208ZZ SALE

C-SE6000ZZ

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
1. The structure is simple and easy to use.
2. The noise level reaches Z1

Product Description

Ball Bearings Stainless Steel
Stainless steel ball bearings are often used in applications such as medical devices, food processing equipment. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter Minimum / Maximum (mm.) : 10 and 50
● Outer Diameter Minimum / Maximum (mm.) : 15 and 110
● Width Minimum / Maximum (mm.) : 4 and 27
● Precision (JIS) : Class 0
● Bearing Type : Closed (Double Shielded (ZZ))
● Load Direction : Radial / Thrust Load or Axial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Ball Bearing

Precision DurabilityCost-Effective

- High Precision Bearings with JIS Class 0 Standard

- Versatile Sizes: Inner Diameter and Outer Diameter within specified ranges.

- Double Shielded for Enhanced Dust Resistance and Durability

- Ball Bearing with Special Price

- Cost-Effective with Misumi Economy Products

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Ball Bearings

・ Deep groove ball bearing is the most commonly used rolling bearing. It is of simple structure and easy to use.
・ This kind of bearing has small friction coefficient and high limit speed.
・ The material of this bearing is equivalent to SUS440C, which has a certain antirust ability.
・ The noise level of this bearing reaches Z1.

Product Featur of Ball Bearings

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ The friction torque is small, and accuracy grade is 0.

Dimensional Drawing of Ball Bearings

Product Dimensional Drawing
C-SE6000ZZ
Stainless steel small diameter ball bearing Double shielded

Material Equivalent to SUS420
Bearing accuracy JIS B 1514 Grade 0
If rust prevention is required, please give priority to products with hard chromium plating, no-electro nickel plated products or those made of stainless steel SUS3 series materials.

Example of Ball Bearings Use

Precautions for Using Ball Bearings

When the precision of the shaft and bearing housing is poor, the Ball Bearings will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Bearing heater	Proper installation of the bearing heater can guarantee a long life of the Ball Bearings. Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly. After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Bearing puller	When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly. (a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole. (b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole. (c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Related Products of Ball Bearings


Nut for ball bearings/Lock washer assembly	Heavy load lock nut	Ball Bearings grease
Typical model: JLNK20	Typical model: HLB10	Typical model: NS7

Specification Table of Ball Bearings

Inner Diameter d (mm)		Clearance of MISUMI quality products (μm)		Clearance of economy series products (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Only 10		2	13	4	18
10	18	3	18	6	23
18	24	5	20	8	25
24	30	5	20	8	25

Part Number	d	D	B	r (min)	Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions				Weight (g) (Reference)
					Cr (Dynamic) N	Cor (Static) N		Ds		dh (max)	R (max)
					Cr (Dynamic) N	Cor (Static) N		(min)	(max)	dh (max)	R (max)
C-SE6700ZZ	10	15	4	0.2	408	204	8000	10.4	11.21	14.2	0.2	2
C-SE6800ZZ		19	5	0.3	867	400	8000	12	12.5	17	0.3	5
C-SE6900ZZ		22	6		1360	604	8000		13	20		9
C-SE6000ZZ		26	8		2304	944	8000		13.5	24		19
C-SE6200ZZ		30	9	0.6	2593	1139	8000	14	16	26	0.6	32
C-SE6300ZZ		35	11	0.6	4089	1641	8000	14	16.5	31	0.6	52
C-SE6701ZZ	12	18	4	0.2	434	247	8000	12.4	13.86	16.7	0.2	3
C-SE6801ZZ		21	5	0.3	969	493	8000	14	14.5	19	0.3	6
C-SE6901ZZ		24	6		1462	706	8000		15	22		11
C-SE6001ZZ		28	8		2593	1139	8000		16	26		21
C-SE6201ZZ		32	10	0.6	3443	1454	8000	16	17	28	0.6	37
C-SE6301ZZ		37	12	1	4905	1998	8000	17	18	32	1	60
C-SE6702ZZ	15	21	4	0.2	442	272	8000	15.4	16.86	19.7	0.2	4
C-SE6802ZZ		24	5	0.3	1046	595	8000	17	17.5	22	0.3	7
C-SE6902ZZ		28	7		2185	1080	8000		17.5	26		16
C-SE6002ZZ		32	9		2831	1352	8000		19	30		30
C-SE6202ZZ		35	11	0.6	3868	1760	8000	19	20	31	0.6	45
C-SE6302ZZ		42	13	1	5780	2601	8000	20	22.5	37	1	83
C-SE6703ZZ	17	23	4	0.2	476	306	8000	17.4	18.86	21.1	0.2	4
C-SE6803ZZ		26	5	0.3	1131	689	8000	19	19.5	24	0.3	8
C-SE6903ZZ		30	7		2321	1224	8000		20	28		18
C-SE6003ZZ		35	10		3026	1564	8000		21	33		39
C-SE6203ZZ		40	12	0.6	4837	2295	8000	21	23	36	0.6	66
C-SE6303ZZ		47	14	1	6843	3171	8000	22	25.5	42	1	113
C-SE6704ZZ	20	27	4	0.2	663	340	8000	20.4	22.36	25.5	0.2	6
C-SE6804ZZ		32	7	0.3	2032	1173	8000	22	22.5	30	0.3	19
C-SE6904ZZ		37	9	0.3	3222	1760	8000	22	24	35	0.3	36
C-SE6004ZZ		42	12	0.6	4752	2380	8000	24	26	38	0.6	69
C-SE6204ZZ		47	14	1	6477	3145	8000	25	28	42	1	106
C-SE6304ZZ		52	15	1.1	8024	3757	8000	26.5		45.5	1	145
C-SE6805ZZ	25	37	7	0.3	2176	1403	8000	27		35	0.3	22
C-SE6905ZZ		42	9		3332	2159	8000	27	29	40	0.3	42
C-SE6005ZZ		47	12	0.6	5109	2788	8000	29	30.5	43	0.6	80
C-SE6205ZZ		52	15	1	5109	2788	8000	30	32	47	1	128
C-SE6305ZZ		62	17	1.1	5109	2788	8000	31.5	36	55.5	1	235
C-SE6806ZZ	30	42	7	0.3	3857	2892	8000	32	33	40	0.3	27
C-SE6906ZZ		47	9	0.3	10404	5389	8000	32	34	45	0.3	48
C-SE6006ZZ		55	13	1	11220	7055	8000	35	37	50	1	116
C-SE6206ZZ		62	16	1	9877	5381	8000	35	39	57		199
C-SE6306ZZ		72	19	1	22695	12750	8000	36.5	42.5	65.5		345
C-SE6807ZZ	35	47	7	0.3	4020	3248	8000	37	38	45	0.3	32
C-SE6907ZZ		55	10	0.6	9265	6645	8000	39	40	51	0.6	88
C-SE6007ZZ		62	14	1	13600	8755	8000	40	42	57	1	151
C-SE6207ZZ		72	17	1	21845	13005	8000	41.5	45	65.5	1	284
C-SE6307ZZ		80	21	1.5	28475	16320	8000	43	47	72	1.5	464
C-SE6808ZZ	40	52	7	0.3	4185	3551	8000	42	43	50	0.3	35
C-SE6908ZZ		62	12	0.6	11626	8473	8000	44	45	58	0.6	132
C-SE6008ZZ		68	15	1	14280	9775	8000	45	47	63	1	190
C-SE6208ZZ		80	18	1	24735	15215	8000	46.5	51	73.5	1	366
C-SE6308ZZ		90	23	1.5	34425	20400	8000	48	53	82	1.5	636
C-SE6809ZZ	45	58	7	0.3	5259	4574	8000	47	47.5	56	0.3	42
C-SE6909ZZ		68	12	0.6	11985	9206	8000	49	50	64	0.6	148
C-SE6009ZZ		75	16	1	17765	12920	8000	50	53.5	70	1	241
C-SE6209ZZ		85	19	1	26775	17340	8000	51.5	55.5	78.5	1	420
C-SE6309ZZ		100	25	1.5	45050	27200	8000	53	61.5	92	1.5	829
C-SE6810ZZ	50	65	7	0.3	5619	5177	8000	52	52.5	63	0.3	65
C-SE6910ZZ		72	12	0.6	12359	9954	8000	54	55	68	0.6	145
C-SE6010ZZ		80	16	1	18530	14110	8000	55	57.5	75	1	261
C-SE6210ZZ		90	20	1	29750	19720	8000	56.5	60	83.5	1	459
C-SE6310ZZ		110	27	2	52700	32725	8000	59	68	101	2	1060

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-SE6000ZZSALE
C-SE6001ZZSALE
C-SE6002ZZSALE
C-SE6003ZZSALE
C-SE6004ZZSALE
C-SE6005ZZSALE
C-SE6006ZZSALE
C-SE6007ZZSALE
C-SE6008ZZSALE
C-SE6009ZZSALE
C-SE6010ZZSALE
C-SE6200ZZSALE
C-SE6201ZZSALE
C-SE6202ZZSALE
C-SE6203ZZSALE
C-SE6204ZZSALE
C-SE6205ZZSALE
C-SE6206ZZSALE
C-SE6207ZZSALE
C-SE6208ZZSALE
C-SE6209ZZSALE
C-SE6210ZZSALE
C-SE6300ZZSALE
C-SE6301ZZSALE
C-SE6302ZZSALE
C-SE6303ZZSALE
C-SE6304ZZSALE
C-SE6305ZZSALE
C-SE6306ZZSALE
C-SE6307ZZSALE
C-SE6308ZZSALE
C-SE6309ZZSALE
C-SE6310ZZSALE
C-SE6700ZZSALE
C-SE6701ZZSALE
C-SE6702ZZSALE
C-SE6703ZZSALE
C-SE6704ZZSALE
C-SE6800ZZSALE
C-SE6801ZZSALE
C-SE6802ZZSALE
C-SE6803ZZSALE
C-SE6804ZZSALE
C-SE6805ZZSALE
C-SE6806ZZSALE
C-SE6807ZZSALE
C-SE6808ZZSALE
C-SE6809ZZSALE
C-SE6810ZZSALE
C-SE6900ZZSALE
C-SE6901ZZSALE
C-SE6902ZZSALE
C-SE6903ZZSALE
C-SE6904ZZSALE
C-SE6905ZZSALE
C-SE6906ZZSALE
C-SE6907ZZSALE
C-SE6908ZZSALE
C-SE6909ZZSALE
C-SE6910ZZSALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Specifications, Environment	Load Direction	Basic Load Rating Cor (Static) (N)	Weight (g)
19,270 VND 17,343 VND	1 Piece(s)	Available	Same day	10	26	8	2304	Standard / Dust Resistant	Radial / Thrust Load, Axial	944	19
21,326 VND 19,193 VND	1 Piece(s)	Available	Same day	12	28	8	2593	Standard / Dust Resistant	Radial / Thrust Load, Axial	1139	21
24,697 VND 22,227 VND	1 Piece(s)	Available	Same day	15	32	9	2831	Standard / Dust Resistant	Radial / Thrust Load, Axial	1352	30
29,434 VND 26,491 VND	1 Piece(s)	Available	Same day	17	35	10	3026	Standard / Dust Resistant	Radial / Thrust Load, Axial	1564	39
42,968 VND 38,671 VND	1 Piece(s)	Available	Same day	20	42	12	4752	Standard / Dust Resistant	Radial / Thrust Load, Axial	2380	69
53,103 VND 47,793 VND	1 Piece(s)	Available	Same day	25	47	12	5109	Standard / Dust Resistant	Radial / Thrust Load, Axial	2788	80
69,999 VND 62,999 VND	1 Piece(s)	Available	Same day	30	55	13	11220	Standard / Dust Resistant	Radial / Thrust Load, Axial	7055	116
90,234 VND 81,211 VND	1 Piece(s)	Available	Same day	35	62	14	13600	Standard / Dust Resistant	Radial / Thrust Load, Axial	8755	151
117,238 VND 105,514 VND	1 Piece(s)	Available	Same day	40	68	15	14280	Standard / Dust Resistant	Radial / Thrust Load, Axial	9775	190
151,038 VND 128,382 VND	1 Piece(s)	Available	Same day	45	75	16	17765	Standard / Dust Resistant	Radial / Thrust Load, Axial	12920	241
191,416 VND 162,704 VND	1 Piece(s)	Available	Same day	50	80	16	18530	Standard / Dust Resistant	Radial / Thrust Load, Axial	14110	261
24,018 VND 21,616 VND	1 Piece(s)	Available	Same day	10	30	9	2593	Standard / Dust Resistant	Radial / Thrust Load, Axial	1139	32
26,769 VND 24,092 VND	1 Piece(s)	Available	Same day	12	32	10	3443	Standard / Dust Resistant	Radial / Thrust Load, Axial	1454	37
29,452 VND 26,507 VND	1 Piece(s)	Available	Same day	15	35	11	3868	Standard / Dust Resistant	Radial / Thrust Load, Axial	1760	45
42,960 VND 38,664 VND	1 Piece(s)	Available	Same day	17	40	12	4837	Standard / Dust Resistant	Radial / Thrust Load, Axial	2295	66
53,188 VND 47,869 VND	1 Piece(s)	Available	Same day	20	47	14	6477	Standard / Dust Resistant	Radial / Thrust Load, Axial	3145	106
70,041 VND 63,037 VND	1 Piece(s)	Available	Same day	25	52	15	5109	Standard / Dust Resistant	Radial / Thrust Load, Axial	2788	128
93,810 VND 84,429 VND	1 Piece(s)	Available	Same day	30	62	16	9877	Standard / Dust Resistant	Radial / Thrust Load, Axial	5381	199
130,990 VND 111,342 VND	1 Piece(s)	Available	Same day	35	72	17	21845	Standard / Dust Resistant	Radial / Thrust Load, Axial	13005	284
178,331 VND 160,498 VND	1 Piece(s)	Available	Same day	40	80	18	24735	Standard / Dust Resistant	Radial / Thrust Load, Axial	15215	366
232,256 VND 197,418 VND	1 Piece(s)	Available	Same day	45	85	19	26775	Standard / Dust Resistant	Radial / Thrust Load, Axial	17340	420
272,697 VND 231,792 VND	1 Piece(s)	Available	Same day	50	90	20	29750	Standard / Dust Resistant	Radial / Thrust Load, Axial	19720	459
36,156 VND 32,540 VND	1 Piece(s)	Available	Same day	10	35	11	4089	Standard / Dust Resistant	Radial / Thrust Load, Axial	1641	52
41,572 VND 37,415 VND	1 Piece(s)	Available	Same day	12	37	12	4905	Standard / Dust Resistant	Radial / Thrust Load, Axial	1998	60
48,406 VND 43,565 VND	1 Piece(s)	Available	Same day	15	42	13	5780	Standard / Dust Resistant	Radial / Thrust Load, Axial	2601	83
63,235 VND 56,912 VND	1 Piece(s)	Available	Same day	17	47	14	6843	Dust Resistant / High Rotational Speed	Radial	3171	113
76,778 VND 69,100 VND	1 Piece(s)	Available	Same day	20	52	15	8024	Standard / Dust Resistant	Radial / Thrust Load, Axial	3757	145
110,707 VND 94,101 VND	1 Piece(s)	Available	Same day	25	62	17	5109	Standard / Dust Resistant	Radial / Thrust Load, Axial	2788	235
178,260 VND 160,434 VND	1 Piece(s)	Available	Same day	30	72	19	22695	Standard / Dust Resistant	Radial / Thrust Load, Axial	12750	345
245,840 VND 221,256 VND	1 Piece(s)	Available	Same day	35	80	21	28475	Standard / Dust Resistant	Radial / Thrust Load, Axial	16320	464
320,279 VND 272,237 VND	1 Piece(s)	Available	Same day	40	90	23	34425	Standard / Dust Resistant	Radial / Thrust Load, Axial	20400	636
448,610 VND 381,319 VND	1 Piece(s)	Available	Same day	45	100	25	45050	Standard / Dust Resistant	Radial / Thrust Load, Axial	27200	829
509,810 VND 433,339 VND	1 Piece(s)	Available	Same day	50	110	27	52700	Standard / Dust Resistant	Radial / Thrust Load, Axial	32725	1060
21,260 VND 19,134 VND	1 Piece(s)	Available	Same day	10	15	4	408	Standard / Dust Resistant	Radial / Thrust Load, Axial	204	2
23,922 VND 21,530 VND	1 Piece(s)	Available	Same day	12	18	4	434	Standard / Dust Resistant	Radial / Thrust Load, Axial	247	3
29,315 VND 26,384 VND	1 Piece(s)	Available	Same day	15	21	4	442	Standard / Dust Resistant	Radial / Thrust Load, Axial	272	4
42,751 VND 36,338 VND	1 Piece(s)	Available	Same day	17	23	4	476	Standard / Dust Resistant	Radial / Thrust Load, Axial	306	4
56,195 VND 47,766 VND	1 Piece(s)	Available	Same day	20	27	4	663	Standard / Dust Resistant	Radial / Thrust Load, Axial	340	6
19,221 VND 17,299 VND	1 Piece(s)	Available	Same day	10	19	5	867	Standard / Dust Resistant	Radial / Thrust Load, Axial	400	5
21,275 VND 19,148 VND	1 Piece(s)	Available	Same day	12	21	5	969	Standard / Dust Resistant	Radial / Thrust Load, Axial	493	6
23,252 VND 20,927 VND	1 Piece(s)	Available	Same day	15	24	5	1046	Standard / Dust Resistant	Radial / Thrust Load, Axial	595	7
29,329 VND 26,396 VND	1 Piece(s)	Available	Same day	17	26	5	1131	Standard / Dust Resistant	Radial / Thrust Load, Axial	689	8
37,412 VND 33,671 VND	1 Piece(s)	Available	Same day	20	32	7	2032	Standard / Dust Resistant	Radial / Thrust Load, Axial	1173	19
49,494 VND 44,545 VND	1 Piece(s)	Available	Same day	25	37	7	2176	Standard / Dust Resistant	Radial / Thrust Load, Axial	1403	22
59,606 VND 53,645 VND	1 Piece(s)	Available	Same day	30	42	7	3857	Standard / Dust Resistant	Radial / Thrust Load, Axial	2892	27
76,399 VND 68,759 VND	1 Piece(s)	Available	Same day	35	47	7	4020	Standard / Dust Resistant	Radial / Thrust Load, Axial	3248	32
103,277 VND 87,785 VND	1 Piece(s)	Available	Same day	40	52	7	4185	Standard / Dust Resistant	Radial / Thrust Load, Axial	3551	33
123,501 VND 104,976 VND	1 Piece(s)	Available	Same day	45	58	7	5259	Standard / Dust Resistant	Radial / Thrust Load, Axial	4574	42
150,450 VND 127,883 VND	1 Piece(s)	Available	Same day	50	65	7	5619	Standard / Dust Resistant	Radial / Thrust Load, Axial	5177	65
19,236 VND 17,312 VND	1 Piece(s)	Available	Same day	10	22	6	1360	Standard / Dust Resistant	Radial / Thrust Load, Axial	604	9
21,291 VND 19,162 VND	1 Piece(s)	Available	Same day	12	24	6	1462	Standard / Dust Resistant	Radial / Thrust Load, Axial	706	11
23,284 VND 20,956 VND	1 Piece(s)	Available	Same day	15	28	7	2185	Standard / Dust Resistant	Radial / Thrust Load, Axial	1080	16
29,362 VND 26,426 VND	1 Piece(s)	Available	Same day	17	30	7	2321	Standard / Dust Resistant	Radial / Thrust Load, Axial	1224	18
36,103 VND 32,493 VND	1 Piece(s)	Available	Same day	20	37	9	3222	Standard / Dust Resistant	Radial / Thrust Load, Axial	1760	36
49,560 VND 44,604 VND	1 Piece(s)	Available	Same day	25	42	9	3332	Standard / Dust Resistant	Radial / Thrust Load, Axial	2159	42
63,034 VND 56,731 VND	1 Piece(s)	Available	Same day	30	47	9	10404	Standard / Dust Resistant	Radial / Thrust Load, Axial	5389	53
83,344 VND 75,010 VND	1 Piece(s)	Available	Same day	35	55	10	9265	Standard / Dust Resistant	Radial / Thrust Load, Axial	6645	88
110,363 VND 93,809 VND	1 Piece(s)	Available	Same day	40	62	12	11626	Standard / Dust Resistant	Radial / Thrust Load, Axial	8473	132
130,536 VND 110,956 VND	1 Piece(s)	Available	Same day	45	68	12	11985	Standard / Dust Resistant	Radial / Thrust Load, Axial	9206	148
157,399 VND 133,789 VND	1 Piece(s)	Available	Same day	50	72	12	12359	Standard / Dust Resistant	Radial / Thrust Load, Axial	9954	145

Loading...Tải…

Basic InformationThông tin cơ bản

Raceway Ring Shape	Ball	Bearing Type	Double Shielded	Outer Ring Type	Flat
Inner/Outer Ring Material	Stainless Steel	Precision (JIS)	Class 0	Rolling Element Material	Stainless Steel
Size Standards	Metric System	Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What is the difference between ball bearing and roller bearing?: Answer:Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question:Question: What is the classification of bearings according to the shape of rolling elements?: Answer:Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question:Question: What is the classification of bearings according to load direction?: Answer:Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question:Question: What is the basic rated life of rolling bearings?: Answer:Answer: The basic rated life of rolling bearings refers to the total number of revolutions that 90% of the ball bearings can rotate without peeling when eleven groups of ball bearings of the same kind and specification rotate respectively under the same conditions.
Question:Question: Can double shielded stainless steel deep groove ball bearings be directly used in corrosive environment?: Answer:Answer: The antirust performance of the material of double shielded stainless steel deep groove ball bearings is weaker than that of SUS3XX series stainless steel. Do not use it directly in corrosive environment.

Check other FAQ (2 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh