What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What is the basic rated life of rolling bearings?

The basic rated life of rolling bearings refers to the total number of revolutions that 90% of the ball bearings can rotate without peeling when eleven groups of ball bearings of the same kind and specification rotate respectively under the same conditions.

Can double shielded stainless steel deep groove ball bearings be directly used in corrosive environment?

The antirust performance of the material of double shielded stainless steel deep groove ball bearings is weaker than that of SUS3XX series stainless steel. Do not use it directly in corrosive environment.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(26 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-SEFL602ZZ

Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) Specifications, Environment type Load Direction CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inner Dia. d(Ø)
2

2.5

3

4

5

6

8
ClearTrống
Outer Dia. D(Ø)
5

6

7

8

9

10

11

12

13

14

15

16

17

19

22
ClearTrống
Width B (or T)(mm)
2.3

2.5

2.6

3

3.5

4

5

6

7
ClearTrống
Basic Load Rating Cr (Dynamic)(N)
85

105

106

111

129

167

196

197

251

275

282

289

319

324

325

361

484

545

547

658

677

814

874

1131

1143

1182

1665
ClearTrống
Specifications, Environment
- Standard
- Dust Resistant
ClearTrống
type
- C-SEFL60
- C-SEFL62
- C-SEFL67
- C-SEFL68
- C-SEFL69
ClearTrống
Load Direction
- Radial
- Thrust Load, Axial
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day
ClearTrống

Specify AlterationsChỉ định thay đổi

Flanged Small Ball Bearings Stainless Steel

Name: Flanged Small Ball Bearings Stainless Steel
Brand: MISUMI
Availability: InStock

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Until 31/12/2024
Volume Discount

Check FAQ of this product (5 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-SEFL602ZZ SALE

C-SEFL603ZZ SALE

C-SEFL605ZZ SALE

C-SEFL606ZZ SALE

C-SEFL608ZZ SALE

C-SEFL624ZZ SALE

C-SEFL625ZZ SALE

C-SEFL626ZZ SALE

C-SEFL673ZZ SALE

C-SEFL674ZZ SALE

C-SEFL675ZZ SALE

C-SEFL676ZZ SALE

C-SEFL678ZZ SALE

C-SEFL682AZZ SALE

C-SEFL682ZZ SALE

C-SEFL683ZZ SALE

C-SEFL684ZZ SALE

C-SEFL685ZZ SALE

C-SEFL686ZZ SALE

C-SEFL688ZZ SALE

C-SEFL602ZZ

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

Flanged Small Ball Bearings Stainless Steel
Stainless steel flanged small ball bearings are commonly used in applications such as dental handpieces and miniature pumps. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter Minimum / Maximum (mm.) : 2 and 8
● Outer Diameter Minimum / Maximum (mm.) : 5 and 22
● Width Minimum / Maximum (mm.) : 2.3 and 7
● Precision (JIS) : Class 0
● Bearing Type : Closed (Double Shielded (ZZ))
● Load Direction : Radial / Thrust Load or Axial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Flanged Small Ball Bearings

Stainless steel miniature bearingsPrecision rotary componentsCorrosion-resistant

- Stainless steel construction for superior corrosion resistance

- Integrated flange design for easy mounting and positioning

- Double-shielded (ZZ) for enhanced dust protection

- Precision engineered to Class 0 standards for optimal performance

- Available in various small inner diameters.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Ball Bearings

・ Deep groove Ball Bearings is the most commonly used rolling bearing. It is of simple structure and easy to use.
・ This kind of bearing has small friction coefficient and high limit speed.
・ The material of this bearing is equivalent to SUS440C, which has a certain antirust ability.
・ The noise level of this bearing reaches Z1.

Product Feature of Ball Bearings

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ The friction torque is small, and accuracy grade is 0.

Dimensional Drawing of Ball Bearings

Product Dimensional Drawing of Ball Bearings
C-SEFL685ZZ
Stainless steel small diameter ball bearing Double shielded

Material Equivalent to SUS440C
Bearing accuracy JIS B 1514 Grade 0
If rust prevention is required, please give priority to products with hard chromium plating, no-electro nickel plated products or those made of stainless steel SUS3 series materials.

Example of Ball Bearings Use

Precautions for Using Ball Bearings

When the precision of the shaft and bearing housing is poor, the Ball Bearings will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Bearing heater	Proper installation of the bearing heater can guarantee a long life of the Ball Bearings. Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly. After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Bearing puller	When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly. (a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole. (b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole. (c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Related Products of Ball Bearings


Nut for Ball Bearings/Lock washer assembly	Heavy load lock nut	Ball Bearings grease
Typical model: JLNK20	Typical model: HLB10	Typical model: NS7

Specification Table of Ball Bearings

Part Number

C－SEFL698ZZ

Key points of Ball Bearings economy series parts confirmation ①

Inner Diameter d (mm)		Clearance of MISUMI quality products (μm)		Clearance of economy series products (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Only 10		2	13	4	18
10	18	3	18	6	23
18	24	5	20	8	25
24	30	5	20	8	25

Part Number	d	D	B	D₁	C	r (min.)	Key points of Ball Bearings economy series parts confirmation ① Basic rated load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions		Weight (g) (Reference)
										Ds (min.)	R (max.)
							Cr (Dynamic) N	Cor (Static) N		Ds (min.)	R (max.)
C-SEFL682ZZ	2	5	2.3	6.1	0.6	0.08	85	24	8000	2.7	0.08	0.22
C-SEFL692ZZ		6	3	7.5	0.8	0.15	167	47	8000	3	0.15	0.48
C-SEFL602ZZ		7	3.5	8.5	0.9	0.15	196	60	8000	3.2	0.15	0.71
C-SEFL682AZZ	2.5	6	2.6	7.1	0.8	0.08	106	35	8000	3.7	0.08	0.36
C-SEFL692AZZ	2.5	7	3.5	8.5	0.9	0.15	196	60	8000	3.85	0.15	0.68
C-SEFL673ZZ	3	6	2.5	7.2	0.6	0.1	105	35	8000	3.6	0.08	0.33
C-SEFL683ZZ		7	3	8.1	0.8	0.1	197	62	8000	3.9	0.1	0.53
C-SEFL693ZZ		8	4	9.5	0.9	0.15	282	86	8000	4.2	0.15	0.97
C-SEFL603ZZ		9	5	10.5	1		289	90	8000			1.63
C-SEFL623ZZ		10	4	11.5	1		319	105	8000			1.86
C-SEFL674ZZ	4	7	2.5	8.2	0.6	0.1	129	51	8000	4.6	0.08	0.35
C-SEFL684ZZ		9	4	10.3	1	0.1	324	106	8000	5	0.1	1.14
C-SEFL694ZZ		11		12.5		0.15	325	108	8000	5.2	0.15	1.96
C-SEFL604ZZ		12		13.5		0.2	484	164	8000	5.6	0.2	2.53
C-SEFL624ZZ		13	5	15		0.2	658	231	8000		0.2	3.53
C-SEFL675ZZ	5	8	2.5	9.2	0.6	0.08	111	43	8000		0.08	0.41
C-SEFL685ZZ		11	5	12.5	1	0.15	361	134	8000	6.2	0.15	2.18
C-SEFL695ZZ		13	4	15		0.2	545	205	8000	6.6	0.2	2.84
C-SEFL605ZZ		14	5	16		0.2	658	241	8000	6.6	0.2	3.85
C-SEFL625ZZ		16	5	18		0.3	874	319	8000	7.7	0.3	5.3
C-SEFL676ZZ	6	10	3	11.2	0.6	0.1	251	104	8000	6.6	0.1	0.77
C-SEFL686ZZ		13	5	15	1.1	0.15	547	209	8000	7	0.15	3.04
C-SEFL696ZZ		15	5	17	1.2	0.2	677	249	8000	7.6	0.2	4.26
C-SEFL606ZZ		17	6	19	1.2	0.3	1143	398	8000	8	0.3	6.61
C-SEFL626ZZ		19	6	22	1.5	0.3	1182	422	8000	8	0.3	9.09
C-SEFL678ZZ	8	12	3.5	13.6	0.8	0.1	275	130	8000	8.8	0.1	1.15
C-SEFL688ZZ		16	5	18	1.1	0.2	814	338	8000	9.6	0.2	4.47
C-SEFL698ZZ		19	6	22	1.5	0.3	1131	434	8000	10	0.3	8.3
C-SEFL608ZZ		22	7	25	1.5	0.3	1665	656	8000	10	0.3	13

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
C-SEFL602ZZSALE
C-SEFL603ZZSALE
C-SEFL605ZZSALE
C-SEFL606ZZSALE
C-SEFL608ZZSALE
C-SEFL624ZZSALE
C-SEFL625ZZSALE
C-SEFL626ZZSALE
C-SEFL673ZZSALE
C-SEFL674ZZSALE
C-SEFL675ZZSALE
C-SEFL676ZZSALE
C-SEFL678ZZSALE
C-SEFL682AZZSALE
C-SEFL682ZZSALE
C-SEFL683ZZSALE
C-SEFL684ZZSALE
C-SEFL685ZZSALE
C-SEFL686ZZSALE
C-SEFL688ZZSALE
C-SEFL692ZZSALE
C-SEFL693ZZSALE
C-SEFL694ZZSALE
C-SEFL695ZZSALE
C-SEFL696ZZSALE
C-SEFL698ZZSALE

Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Specifications, Environment	Load Direction	Basic Load Rating Cor (Static) (N)	Weight (g)
29,303 VND 24,908 VND	1 Piece(s)	Available	Same day	2	7	3.5	196	Standard / Dust Resistant	Radial / Thrust Load, Axial	60	0.71
22,551 VND 19,168 VND	1 Piece(s)	Available	Same day	3	9	5	289	Standard / Dust Resistant	Radial / Thrust Load, Axial	90	1.63
22,559 VND 19,175 VND	1 Piece(s)	Available	Same day	5	14	5	658	Standard / Dust Resistant	Radial / Thrust Load, Axial	241	3.85
29,325 VND 24,926 VND	1 Piece(s)	Available	Same day	6	17	6	1143	Standard / Dust Resistant	Radial / Thrust Load, Axial	398	6.61
36,026 VND 32,423 VND	1 Piece(s)	Available	Same day	8	22	7	1665	Standard / Dust Resistant	Radial / Thrust Load, Axial	656	13
22,558 VND 19,174 VND	1 Piece(s)	Available	Same day	4	13	5	658	Standard / Dust Resistant	Radial / Thrust Load, Axial	231	3.53
24,613 VND 22,152 VND	1 Piece(s)	Available	Same day	5	16	5	874	Standard / Dust Resistant	Radial / Thrust Load, Axial	319	5.3
29,332 VND 24,932 VND	1 Piece(s)	Available	Same day	6	19	6	1182	Standard / Dust Resistant	Radial / Thrust Load, Axial	422	9.09
22,546 VND 19,164 VND	1 Piece(s)	Available	Same day	3	6	2.5	105	Standard / Dust Resistant	Radial / Thrust Load, Axial	35	0.33
22,546 VND 19,164 VND	1 Piece(s)	Available	Same day	4	7	2.5	129	Standard / Dust Resistant	Radial / Thrust Load, Axial	51	0.35
22,546 VND 19,164 VND	1 Piece(s)	Available	Same day	5	8	2.5	111	Standard / Dust Resistant	Radial / Thrust Load, Axial	43	0.41
22,547 VND 20,292 VND	1 Piece(s)	Available	Same day	6	10	3	251	Standard / Dust Resistant	Radial / Thrust Load, Axial	104	0.77
23,234 VND 20,911 VND	1 Piece(s)	Available	Same day	8	12	3.5	275	Standard / Dust Resistant	Radial / Thrust Load, Axial	130	1.15
29,303 VND 26,373 VND	1 Piece(s)	Available	Same day	2.5	6	2.6	106	Standard / Dust Resistant	Radial / Thrust Load, Axial	35	0.36
25,962 VND 22,068 VND	1 Piece(s)	Available	Same day	2	5	2.3	85	Standard / Dust Resistant	Radial / Thrust Load, Axial	24	0.22
22,546 VND 19,164 VND	1 Piece(s)	Available	Same day	3	7	3	197	Standard / Dust Resistant	Radial / Thrust Load, Axial	62	0.53
22,548 VND 19,166 VND	1 Piece(s)	Available	Same day	4	9	4	324	Standard / Dust Resistant	Radial / Thrust Load, Axial	106	1.14
22,555 VND 20,300 VND	1 Piece(s)	Available	Same day	5	11	5	361	Standard / Dust Resistant	Radial / Thrust Load, Axial	134	2.18
22,557 VND 20,301 VND	1 Piece(s)	Available	Same day	6	13	5	547	Standard / Dust Resistant	Radial / Thrust Load, Axial	209	3.04
23,245 VND 20,921 VND	1 Piece(s)	Available	Same day	8	16	5	814	Standard / Dust Resistant	Radial / Thrust Load, Axial	338	4.47
25,962 VND 22,068 VND	1 Piece(s)	Available	Same day	2	6	3	167	Standard / Dust Resistant	Radial / Thrust Load, Axial	47	0.48
22,548 VND 19,166 VND	1 Piece(s)	Available	Same day	3	8	4	282	Standard / Dust Resistant	Radial / Thrust Load, Axial	86	0.97
22,554 VND 19,171 VND	1 Piece(s)	Available	Same day	4	11	4	325	Standard / Dust Resistant	Radial / Thrust Load, Axial	108	1.96
22,556 VND 19,173 VND	1 Piece(s)	Available	Same day	5	13	4	545	Standard / Dust Resistant	Radial / Thrust Load, Axial	205	2.84
23,245 VND 19,758 VND	1 Piece(s)	Available	Same day	6	15	5	677	Standard / Dust Resistant	Radial / Thrust Load, Axial	249	4.26
23,940 VND 21,546 VND	1 Piece(s)	Available	Same day	8	19	6	1131	Standard / Dust Resistant	Radial / Thrust Load, Axial	434	8.3

Loading...Tải…

Basic InformationThông tin cơ bản

Raceway Ring Shape	Ball	Bearing Type	Double Shielded	Outer Ring Type	With Flange
Inner/Outer Ring Material	Stainless Steel	Precision (JIS)	Class 0	Rolling Element Material	Stainless Steel
Size Standards	Metric System	Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What is the difference between ball bearing and roller bearing?: Answer:Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question:Question: What is the classification of bearings according to the shape of rolling elements?: Answer:Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question:Question: What is the classification of bearings according to load direction?: Answer:Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question:Question: What is the basic rated life of rolling bearings?: Answer:Answer: The basic rated life of rolling bearings refers to the total number of revolutions that 90% of the ball bearings can rotate without peeling when eleven groups of ball bearings of the same kind and specification rotate respectively under the same conditions.
Question:Question: Can double shielded stainless steel deep groove ball bearings be directly used in corrosive environment?: Answer:Answer: The antirust performance of the material of double shielded stainless steel deep groove ball bearings is weaker than that of SUS3XX series stainless steel. Do not use it directly in corrosive environment.

Check other FAQ (2 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Inner Dia. d(Ø)

Outer Dia. D(Ø)

Width B (or T)(mm)

Basic Load Rating Cr (Dynamic)(N)

Specifications, Environment

type

Load Direction

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Flanged Small Ball Bearings Stainless Steel

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Economy Flanged Small Ball Bearings

Product Overview of Ball Bearings

Product Feature of Ball Bearings

Dimensional Drawing of Ball Bearings

Example of Ball Bearings Use

Precautions for Using Ball Bearings

Related Products of Ball Bearings

Specification Table of Ball Bearings

Part Number

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng