(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product Detail
Applicable Linear Guide
type
Rail Length L
Block Type
Assembly Height H
Nominal Part Number
Rail Type
Set / Single Item
Preload
Accuracy Standards
Material
No. of Blocks
Lubrication Type
Lubrication Type
L Dimension Type
Block Material (Surface Treatment)
Rail Material (Surface Treatment)
Rail Surface Treatment
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Applicable Linear Guide
-
type
- C-MLG
- C-MLGB
- E-GMLG
- E-SMLG
-
Rail Length L(mm)
-
Block Type
- Standard
- Standard
-
Assembly Height H(mm)
-
Nominal Part Number
-
Rail Type
-
Standard Rail
-
-
Set / Single Item
- Set
- Block Only
-
Preload
- Clearance
- Clearance
-
Accuracy Standards
- Standard Grade
-
Material
- Carbon Steel
- Stainless Steel
-
No. of Blocks
-
Lubrication Type
- Lubrication Applied
-
Lubrication Type
- Lithium Grease Filled
-
L Dimension Type
- Fixed Type
- Specified Type
-
Block Material (Surface Treatment)
- Carbon Steel (Bearing Steel)
- Stainless Steel
-
Rail Material (Surface Treatment)
- Carbon Steel (Bearing Steel)
- Stainless Steel
-
Rail Surface Treatment
- Vacuum evaporated chrome plating
- none
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 5 Day(s) or Less
- 15 Day(s) or Less
- 16 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Miniature Linear Guides Standard (C-MLG12-370)
- Volume Discount
You can add up to 6 items per a category to the compare list.
Brand :
MiSUMi Economy
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
Miniature Linear Guides Standard
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 170 and 345
● Assembly Height (mm.): 8, 10, 13 and 16
● Rail Type : Standard Rail
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel and Stainless Steel
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
See more ...
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 170 and 345
● Assembly Height (mm.): 8, 10, 13 and 16
● Rail Type : Standard Rail
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel and Stainless Steel
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
See more ...
Economy Miniature Linear Guide
MiniatureLinear GuidePrecision
- Customizable Rail Length For Versatile Applications
- Smooth And Precise Linear Motion
- Suitable For High Precision Equipment
- Available In Carbon Steel And Stainless Steel
- Cost-Effective Solution Without Compromising Performance
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview
Linear guide rails, also known as slide rails, linear guides, or linear slide rails, are used for linear reciprocating motion applications. They have a higher rated load than linear bearings while maintaining the same volume of moving components, as well as linear motion accuracy. They can also bear a certain amount of torque load, enabling high-precision linear movement under high load conditions.Linear guide rails are used to support and guide moving parts, allowing them to move in a reciprocating linear motion along a specified direction. They are mainly used in mechanical structures that require high precision. The moving and fixed components of the linear guide rail do not use an intermediate medium, but instead employ rolling steel balls.
Product Comparison
■ Comparison with Similar MISUMI Product| Similar MISUMI Product SSEB10-115 | Economy Series E-GMLG9-115 | |
| Material | Stainless Steel | Carbon Steel |
| Hardness | 56HRC up | 58HRC up |
| Basic Rated Load C (Dynamic) (kN) | 1.5 | 1.86 |
| Basic Rated Load Co (Static) (kN) | 2.5 | 2.55 |
| Static Allowable Moment MA/MB (N・m) | 5.1 | 7.35 |
| Static Allowable Moment MC (N・m) | 10.2 | 11.76 |
| Height H Tolerance Difference (μm) | ±20 | ±20 |
| Height H Pair Variation Difference (μm) | 15 | 40 |
| Width N Tolerance Difference (μm) | ±25 | ±25 |
| Width N Pair Variation Difference (μm) | 20 | 40 |
| Running Parallelism Guarantee (μm)* | 7 | 15 |
| Preload Management | Y | N |
| Model No. Selection Reference | Height H Reference | Rail Width WR Reference |
| RoHS10 | Compliant | Compliant |
Dimensional Drawing
■ Material
| Type |  Material |  Rail Surface Treatment |  Hardness | |
| Guide Rail | Block | |||
| C－MLG | Bearing Steel | Stainless Steel | - | 58-62HRC |
| E－GMLG | Vacuum evaporated chrome plating | |||
| E－SMLG | Stainless Steel | - | 55-58HRC | |
| C－MLGB | - | Stainless Steel | - | - |
Specification Table
■Component Kit
| Part Number |  L (Specified Length) | Component Dimension (mm) | Block Dimension (mm) | Guide Rail Dimension (mm) | ||||||||||||||||
 Type |  NominalWR | H | H1 | N | W | B | B1 | C | L1 | L2 | Gn | Mxℓ | H2 | WR | Hr | D | h | d | P | |
| Normal Clearance Type | ||||||||||||||||||||
| E－GMLG (Rail:Bearing Steel) E－SMLG (Rail:Stainless Steel) | 7 | 25~900 | 8 | 1.5 | 5 | 17 | 12 | 2.5 | 8 | 13.5 | 22.65 | Φ1.2 | M2×2.5 | 1.5 | 7 | 4.8 | 4.2 | 2.3 | 2.4 | 15 |
| 9 | 35~900 | 10 | 2 | 5.5 | 20 | 15 | 2.5 | 10 | 18.9 | 29.60 | Φ1.4 | M3×3 | 1.8 | 9 | 6.5 | 6 | 3.5 | 3.5 | 20 | |
| 12 | 45~900 | 13 | 3 | 7.5 | 27 | 20 | 3.5 | 15 | 20.7 | 35.75 | Φ2 | M3×3.5 | 2.5 | 12 | 8 | 6 | 4.5 | 3.5 | 25 | |
| 15 | 70~900 | 16 | 4 | 8.5 | 32 | 25 | 3.5 | 20 | 26.7 | 43.60 | M3 | M3×4 | 3 | 15 | 10 | 6 | 4.5 | 3.5 | 40 | |
■Single Block
| Part Number | Block Dimension (mm) | |||||||||
 Type |  Nominal | W | B | B1 | L1 | L2 | C | M×ℓ | H2 | Gn |
| C－MLGB | 7 | 17 | 12 | 2.5 | 12.5 | 25.34 | 8 | M2×2.5 | 1.5 | Φ1.2 |
| 9 | 20 | 15 | 17.5 | 28.98 | 10 | M3×3 | 1.8 | Φ1.4 | ||
| 12 | 27 | 20 | 3.5 | 20.1 | 33.9 | 15 | M3×3.5 | 2.5 | Φ2 | |
| 15 | 32 | 25 | 25.1 | 41.5 | 20 | M3×4 | 3 | M3 | ||
The dimensional tolerance for length L is ±1mm.The dimensional tolerance for end distance E is ±0.5mm.■ Allowable Load
| Nominal | Basic Rated Load | Static Allowable Moment | Mass | |||
| C (Dynamic) kN | Co (Static) kN | MA・MB N.m | MC N.m | Blcok kg | Rail kg/m | |
| 7 | 0.98 | 1.24 | 2.84 | 4.7 | 0.01 | 0.22 |
| 9 | 1.86 | 2.55 | 7.35 | 11.76 | 0.016 | 0.38 |
| 12 | 2.84 | 3.92 | 13.72 | 25.48 | 0.034 | 0.65 |
| 15 | 4.61 | 5.59 | 21.56 | 45.08 | 0.059 | 1.06 |
■ Detailed dimension of L dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the rail at this time.
In addition, Dimension E's calculation formula is as follows
"E" calculation formula
Economy series Miniature Linear Guide - Standard Guide Type -
| H (Nominal) | 8 (7) | 10 (9) | 13 (12) | 16 (15) | Number of mounting holes M |
| L | 25～35 | 35～47 | 45～57 | 70～87 | 2 |
| 36～50 | 48～67 | 58～82 | 88～127 | 3 | |
| 51～65 | 68～87 | 83～107 | 128～167 | 4 | |
| 66～80 | 88～107 | 108～132 | 168～207 | 5 | |
| 81～95 | 108～127 | 133～157 | 208～247 | 6 | |
| 96～110 | 128～147 | 158～182 | 248～287 | 7 | |
| 111～125 | 148～167 | 183～207 | 288～327 | 8 | |
| 126～140 | 168～187 | 208～232 | 328～367 | 9 | |
| 141～155 | 188～207 | 233～257 | 368～407 | 10 | |
| 156～170 | 208～227 | 258～282 | 408～447 | 11 | |
| 171～185 | 228～247 | 283～307 | 448～487 | 12 | |
| 186～200 | 248～267 | 308～332 | 488～527 | 13 | |
| 201～215 | 268～287 | 333～357 | 528～567 | 14 | |
| 216～230 | 288～307 | 358～382 | 568～607 | 15 | |
| 231～245 | 308～327 | 383～407 | 608～647 | 16 | |
| 246～260 | 328～347 | 408～432 | 648～687 | 17 | |
| 261～275 | 348～367 | 433～457 | 688～727 | 18 | |
| 276～290 | 368～387 | 458～482 | 728～767 | 19 | |
| 291～305 | 388～407 | 483～507 | 768～807 | 20 | |
| 306～320 | 408～427 | 508～532 | 808～847 | 21 | |
| 321～335 | 428～447 | 533～557 | 848～887 | 22 | |
| 336～350 | 448～467 | 558～582 | 888～900 | 23 | |
| 351～365 | 468～487 | 583～607 | - | 24 | |
| 366～380 | 488～507 | 608～632 | 25 | ||
| 381～395 | 508～527 | 633～657 | 26 | ||
| 396～410 | 528～547 | 658～682 | 27 | ||
| 411～425 | 548～567 | 683～707 | 28 | ||
| 426～440 | 568～587 | 708～732 | 29 | ||
| 441～455 | 588～607 | 733～757 | 30 | ||
| 456～470 | 608～627 | 758～782 | 31 | ||
| 471～485 | 628～647 | 783～807 | 32 | ||
| 486～500 | 648～667 | 808～832 | 33 | ||
| 501～515 | 668～687 | 833～857 | 34 | ||
| 516～530 | 688～707 | 858～882 | 35 | ||
| 531～545 | 708～727 | 883～900 | 36 | ||
| 546～560 | 728～747 | - | 37 | ||
| 561～575 | 748～767 | 38 | |||
| 576～590 | 768～787 | 39 | |||
| 591～605 | 788～807 | 40 | |||
| 606～620 | 808～827 | 41 | |||
| 621～635 | 828～847 | 42 | |||
| 636～650 | 848～867 | 43 | |||
| 651～665 | 868～887 | 44 | |||
| 666～680 | 888～900 | 45 | |||
| 681～695 | - | 46 | |||
| 696～710 | 47 | ||||
| 711～725 | 48 | ||||
| 726～740 | 49 | ||||
| 741～755 | 50 | ||||
| 756～770 | 51 | ||||
| 771～785 | 52 | ||||
| 786～800 | 53 | ||||
| 801～815 | 54 | ||||
| 816～830 | 55 | ||||
| 831～845 | 56 | ||||
| 846～860 | 57 | ||||
| 861～875 | 58 | ||||
| 876～890 | 59 | ||||
| 891～900 | 60 | ||||
| P | 15 | 20 | 25 | 40 |
Alterations
| Alterations |  Code | Spec. | ||||||||
Change to Tapped Holes | MC | Ordering code: MC Change counterbored holes for fixing a guide to tapped holes.
| ||||||||
| 2-Block Specifications | B2 | 1 block added to 1-block product to ship as 2 block item. If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. | ||||||||
| 3-Block Specifications | B3 | 2 blocks added to 1-block product to ship as 3 block item.If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. | ||||||||
| 4-Block Specifications | B4 | 3 blocks added to 1-block product to ship as 4 block item.If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package. | ||||||||
| Preload adjustment | ZF | Change Z0: zero preload to ZF: Normal clearance Z1: Light preload Z2: Medium preload | ||||||||
| Z1 | ||||||||||
| Z2 | ||||||||||
| Rail End Cut | Left End Cut ES | Specify the edge distance in 0.5 mm increments. When the specified edge distance exceeds or is close to the hole spacing, cutting may result in hole breakage. EB + ES = 2E. In cases where cutting is not feasible, distribute the dimensions evenly according to the standards. | ||||||||
| Right End Cut EB |
Precision Benchmark
●Dimensional Precision| Dimensional Precision Type | Precision Standard | Misumi |
| Miniature | Height H Tolerance | ±40 |
| Height H Pair Variation | 40 | |
| Width N Tolerance | ±40 | |
| Width N Pair Variation | 40 |
| Rail Length (mm) | Accuracy grade (μm) |
| Less than 50 | 12 |
| 50-80 | 13 |
| 80-125 | 15 |
| 125-200 | 15 |
| 200-250 | 16 |
| 250-315 | 17 |
| 315-400 | 18 |
| 400-500 | 19 |
| 500-630 | 20 |
| 630-800 | 22 |
| 800-900 | 23 |
[Running Parallelism]
The values in the table are measured after the slide rail is fixed on the base.
When moving the slider within the entire length of the slide rail, measure the change of the upper surface C of the slider relative to the bottom surface A of the slide rail, and the change of the reference surface D of the slider relative to the reference surface B of the slide rail.
When moving the sliding block within the entire length of the slide rail, measure the change of the upper surface C of the slider relative to the bottom surface A of the slide rail, and the change of the reference surface D of the slider relative to the reference surface B of the slide rail.
Product Features
Feature 1: New construction, greatly reducing noise and improving smoothness.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high-speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high-speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Precautions
For normal use, the installation of the linear guide needs to meet the following four points:
① Whether the shape of the mounting surface produces interference
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard installation method
Click
here for the detailed installation method
Maintenance (supply of grease)
Grease forms an oil film on the surface of the linear guide ball and rolling surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the
service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
Miniature: Lithium Soap based Grease
Recommended grease filling interval: Usually every 3 months
Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard installation method
Click
here for the detailed installation methodMaintenance (supply of grease)
Grease forms an oil film on the surface of the linear guide ball and rolling surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the
service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
Miniature: Lithium Soap based Grease
Recommended grease filling interval: Usually every 3 months
Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
Usage Method
■ About use
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ Economy series Miniature linear guide rail adopts bearing steel. If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
Miniature Linear Guide: Lithium Soap-based Grease (MULTEMP Grease PS2)
Medium· and Heavy Duty Linear Guide: Lithium Soap-based Grease (Showa Shell Petroleum Albania Grease S2)
② Recommended Grease Injection Interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ Economy series Miniature linear guide rail adopts bearing steel. If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
Miniature Linear Guide: Lithium Soap-based Grease (MULTEMP Grease PS2)
Medium· and Heavy Duty Linear Guide: Lithium Soap-based Grease (Showa Shell Petroleum Albania Grease S2)
② Recommended Grease Injection Interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
Example of Use
Mechanism Name: 4 times stroke slide
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.
For details, click here
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.
For details, click
hereApplication Industries
| Medical | Smart phone | |
 |  | |
| Robotics | Electronic & Electrical Appliances | |
 |  |
Related Products
| Miniature linear guide rail | Medium Load linear guide | Heavy Load linear guide | ||
 |  |  | ||
| Typical model: SSEBZ10-55 | Typical model: SVR24-280 | Typical model: SXR24-280 |
Related Documents
For the installation and use of linear guides, please refer to
here
herePart Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| C-MLG12-370 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Rail Length L (mm) | Block Type | Assembly Height H (mm) | Nominal Part Number | Rail Type | Set / Single Item | Preload | Accuracy Standards | Material | No. of Blocks | Lubrication Type | Lubrication Type | L Dimension Type | Applicable Linear Guide | Block Material (Surface Treatment) | Rail Material (Surface Treatment) | Rail Surface Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
379,106 VND | 1 Piece(s) | Available | Same day | 370 | [Standard] Standard Block | 13 | 12 | Standard Rail | Set | [Clearance] Normal Clearance | Standard Grade | Carbon Steel | 1 | Lubrication Applied | Lithium Grease Filled | Fixed Type | - | Carbon Steel (Bearing Steel) | Carbon Steel (Bearing Steel) | none |
Loading...Tải…
Basic InformationThông tin cơ bản
| Ball Arrangement | Miniature Type | Retainer | N/A | Rolling Element | Ball |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Frequently asked question (FAQ)FAQ
- Question:Question: Can linear guides or sliders be purchased separately?
- Answer:Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
- Question:Question: Can the stainless steel guide rails be guaranteed not to rust?
- Answer:Answer: Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.
- Question:Question: What problems should be paid attention to when the linear guide is installed vertically?
- Answer:Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
- Question:Question: What does micro preloading in linear guide mean?
- Answer:Answer: MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.
- Question:Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?
- Answer:Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
- Question:Question: Can the corresponding linear guide products be selected according to the third-party guide rail model?
- Answer:Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
- Question:Question: Can the rail or slider be repaired if it is damaged?
- Answer:Answer: Repair service is not provided, re-purchase is recommended.
- Question:Question: Can linear guide length be arbitrarily specified?
- Answer:Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy