(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (ICT) 16/12/2024. We apologize for the inconvenience.
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(166 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN60H100
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Circumference Length(mm)

    • 304.8
    • 368.3
    • 431.8
    • 469.9
    • 508
    • 533.4
    • 558.8
    • 571.5
    • 584.2
    • 596.9
    • 609.6
    • 622.3
    • 635
    • 647.7
    • 660.4
    • 685.8
    • 698.5
    • 711.2
    • 723.9
    • 736.6
    • 762
    • 787.4
    • 800.1
    • 812.8
    • 825.5
    • 838.2
    • 850.9
    • 863.6
    • 876.3
    • 889
    • 901.7
    • 914.4
    • 927.1
    • 939.8
    • 952.5
    • 965.2
    • 977.9
    • 990.6
    • 1003.30
    • 1016
    • 1028.7
    • 1041.4
    • 1054.1
    • 1066.8
    • 1079.5
    • 1092.2
    • 1104.9
    • 1117.6
    • 1130.3
    • 1143
    • 1168.4
    • 1181.1
    • 1193.8
    • 1206.5
    • 1219.2
    • 1231.9
    • 1244.6
    • 1257.30
    • 1270
    • 1295.4
    • 1308.1
    • 1320.80
    • 1333.5
    • 1346.2
    • 1371.6
    • 1384.3
    • 1397.00
    • 1422.4
    • 1435.10
    • 1447.8
    • 1473.2
    • 1485.9
    • 1498.6
    • 1524
    • 1536.7
    • 1549.40
    • 1562.1
    • 1574.8
    • 1587.5
    • 1600.2
    • 1625.6
    • 1638.3
    • 1651
    • 1663.7
    • 1676.4
    • 1701.8
    • 1727.2
    • 1752.6
    • 1778
    • 1803.40
    • 1828.8
    • 1841.5
    • 1854.2
    • 1879.6
    • 1905
    • 1930.4
    • 1955.8
    • 1981.2
    • 2006.6
    • 2032
    • 2057.4
    • 2082.8
    • 2108.2
    • 2133.6
    • 2159
    • 2184.4
    • 2209.8
    • 2235.2
    • 2260.6
    • 2286
    • 2311.4
    • 2336.8
    • 2362.2
    • 2387.6
    • 2413
    • 2438.4
    • 2489.20
    • 2501.9
    • 2540
    • 2590.8
    • 2603.5
    • 2667.00
    • 2743.2
    • 2794
    • 2844.8
    • 2870.2
    • 2882.9
    • 2895.60
    • 2921.00
    • 2946.4
    • 2997.2
    • 3048
    • 3149.6
    • 3175
    • 3200.40
    • 3225.8
    • 3302
    • 3365.5
    • 3429
    • 3556
    • 3657.60
    • 3683
    • 3810
    • 3835.40
    • 3860.8
    • 3937
    • 3962.4
    • 4064
    • 4191
    • 4267.2
    • 4318
    • 4445
    • 4572
    • 4699.00
    • 4826
    • 5334.0

    ClearTrống

  • Number of Teeth

    • 24
    • 29
    • 34
    • 37
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 54
    • 55
    • 56
    • 57
    • 58
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 102
    • 103
    • 104
    • 105
    • 106
    • 108
    • 109
    • 110
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 120
    • 121
    • 122
    • 123
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 136
    • 138
    • 140
    • 142
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 154
    • 156
    • 158
    • 160
    • 162
    • 164
    • 166
    • 168
    • 170
    • 172
    • 174
    • 176
    • 178
    • 180
    • 182
    • 184
    • 186
    • 188
    • 190
    • 192
    • 196
    • 197
    • 200
    • 204
    • 205
    • 210
    • 216
    • 220
    • 224
    • 226
    • 227
    • 228
    • 230
    • 232
    • 236
    • 240
    • 248
    • 250
    • 252
    • 254
    • 260
    • 265
    • 270
    • 280
    • 288
    • 290
    • 300
    • 302
    • 304
    • 310
    • 312
    • 320
    • 330
    • 336
    • 340
    • 350
    • 360
    • 370
    • 380
    • 420

    ClearTrống

  • type

    • C-TBN□□□H

    ClearTrống

  • Belt Width (mm)(mm)

    • 19.1
    • 25.4
    • 38.1
    • 50.8

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.75
    • 1
    • 1.5
    • 2

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts H (Part Number)

Timing Belts H
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
166 Part Numbers Available

C-TBN60H100 SALE

C-TBN1000H100 SALE

C-TBN1020H100 SALE

C-TBN1025H100 SALE

C-TBN1050H100 SALE

C-TBN1070H100 SALE

C-TBN1080H100 SALE

C-TBN1100H100 SALE

C-TBN1120H100 SALE

C-TBN1130H100 SALE

C-TBN1135H100 SALE

C-TBN1140H100 SALE

C-TBN1150H100 SALE

C-TBN1160H100 SALE

C-TBN1180H100 SALE

C-TBN1200H100 SALE

C-TBN120H100 SALE

C-TBN1240H100 SALE

C-TBN1250H100 SALE

C-TBN1260H100 SALE

C-TBN60H100
C-TBN60H100

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      20,021VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

RoHS Compliant Product



Economy H-Type Timing Belt

Quiet OperationCustomizableChloroprene Material

- With a wide range of belt lengths and widths, you can tailor the belt to perfectly match your specific equipment needs.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

Economy H-Type Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber
Specifications Overview
TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
H12.740°6.122.294.31140
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The belt circumference length of H (inch size) is the belt number.
timing beltTiming belt circumference length is core wire length.
timing beltC-TBN timing belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
 
Specification Table
■ Specification Table
Please order after selecting part number and parameters according to the selection steps to .
Ordering Example Part Number (TypeBelt Number Nominal Belt Width)
 C-TBN515H075

■ C-TBN
Tooth profile H (Pitch: 12.7mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TBN60H75
(19.1mm)

100
(25.4mm)

150
(38.1mm)

200
(50.8mm)		12152.40
120H24304.80
145H29368.30
170H34431.80
185H37469.90
200H40508.00
205H41520.70
210H42533.40
220H44558.80
225H45571.50
230H46584.20
235H47596.90
240H48609.60
245H49622.30
250H50635.00
255H51647.70
260H52660.40
270H54685.80
275H55698.50
280H56711.20
285H57723.90
290H58736.60
300H60762.00
305H61774.70
310H62787.40
315H63800.10
320H64812.80
325H65825.50
330H66838.20
335H67850.90
340H68863.60
345H69876.30
350H70889.00
355H71901.70
360H72914.40
365H73927.10
370H74939.80
375H75952.50
380H76965.20
385H77977.90
390H78990.60
395H791003.30
400H801016.00
405H811028.70
410H821041.40
415H831054.10
420H841066.80
425H851079.50
430H861092.20
435H871104.90
440H881117.60
445H891130.30
450H901143.00
460H921168.40
465H931181.10
470H941193.80
475H951206.50
480H961219.20
485H971231.90
490H981244.60
495H991257.30
500H1001270.00
510H1021295.40
515H1031308.10
520H1041320.80
525H1051333.50
530H1061346.20
540H1081371.60
545H1091384.30
550H1101397.00
555H1111409.70
560H1121422.40
565H1131435.10
570H1141447.80
580H1161473.20
585H1171485.90
590H1181498.60
600H1201524.00
605H1211536.70
610H1221549.40
615H1231562.10
620H1241574.80
625H1251587.50
630H1261600.20
640H1281625.60
645H1291638.30
650H1301651.00
660H1321676.40
670H1341701.80
680H1361727.20
690H1381752.60
700H1401778.00
710H1421803.40
720H1441828.80
725H1451841.50
730H1461854.20
740H1481879.60
750H1501905.00
760H1521930.40
770H1541955.80
780H1561981.20
785H1571993.90
790H1582006.60
800H1602032.00
810H1622057.40
820H1642082.80
830H1662108.20
840H1682133.60
850H1702159.00
860H1722184.40
870H1742209.80
880H1762235.20
900H1802286.00
910H1822311.40
920H1842336.80
930H1862362.20
940H1882387.60
950H1902413.00
960H1922438.40
980H1962489.20
985H1972501.90
1000H2002540.00
1020H2042590.80
1050H2102667.00
1070H2142717.80
1080H2162743.20
1100H2202794.00
1120H2242844.80
1130H2262870.20
1135H2272882.90
1140H2282895.60
1150H2302921.00
1160H2322946.40
1180H2362997.20
1200H2403048.00
1240H2483149.60
1250H2503175.00
1260H2523200.40
1270H2543225.80
1285H2573263.90
1300H2603302.00
1325H2653365.50
1350H2703429.00
1360H2723454.40
1400H2803556.00
1440H2883657.60
1450H2903683.00
1460H2923708.40
1500H3003810.00
1510H3023835.40
1550H3103937.00
1560H3123962.40
1600H3204064.00
1630H3264140.20
1650H3304191.00
1680H3364267.20
1700H3404318.00
1750H3504445.00
1780H3564521.20
1800H3604572.00
1850H3704699.00
1900H3804826.00
1950H3904953.00
2100H4205334.00

Product Features

S type circular tooth profile economy series timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: timing belt Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The timing belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right timing belt to replace.
④To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new timing belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the timing belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please timing belt avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Belt Pulleys S2M Type Flat Timing Belt For General Use Economy Series Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economy series Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
60
90
  1. 1
  2. 2
  3. NextKế tiếp >>
Part Number
C-TBN60H100SALE
C-TBN1000H100SALE
C-TBN1020H100SALE
C-TBN1025H100SALE
C-TBN1050H100SALE
C-TBN1070H100SALE
C-TBN1080H100SALE
C-TBN1100H100SALE
C-TBN1120H100SALE
C-TBN1130H100SALE
C-TBN1135H100SALE
C-TBN1140H100SALE
C-TBN1150H100SALE
C-TBN1160H100SALE
C-TBN1180H100SALE
C-TBN1200H100SALE
C-TBN120H100SALE
C-TBN1240H100SALE
C-TBN1250H100SALE
C-TBN1260H100SALE
C-TBN1270H100SALE
C-TBN1285H100SALE
C-TBN1300H100SALE
C-TBN1325H100SALE
C-TBN1350H100SALE
C-TBN1360H100SALE
C-TBN1400H100SALE
C-TBN1440H100SALE
C-TBN1450H100SALE
C-TBN145H100SALE
C-TBN1460H100SALE
C-TBN1500H100SALE
C-TBN1510H100SALE
C-TBN1520H100SALE
C-TBN1550H100SALE
C-TBN1560H100SALE
C-TBN1600H100SALE
C-TBN1630H100SALE
C-TBN1650H100SALE
C-TBN1680H100SALE
C-TBN1700H100SALE
C-TBN170H100SALE
C-TBN1750H100SALE
C-TBN1780H100SALE
C-TBN1800H100SALE
C-TBN1850H100SALE
C-TBN185H100SALE
C-TBN1900H100SALE
C-TBN1950H100SALE
C-TBN200H100SALE
C-TBN205H100SALE
C-TBN2100H100SALE
C-TBN210H100SALE
C-TBN220H100SALE
C-TBN225H100SALE
C-TBN230H100SALE
C-TBN235H100SALE
C-TBN240H100SALE
C-TBN245H100SALE
C-TBN250H100SALE
C-TBN255H100SALE
C-TBN260H100SALE
C-TBN270H100SALE
C-TBN275H100SALE
C-TBN280H100SALE
C-TBN285H100SALE
C-TBN290H100SALE
C-TBN300H100SALE
C-TBN305H100SALE
C-TBN310H100SALE
C-TBN315H100SALE
C-TBN320H100SALE
C-TBN325H100SALE
C-TBN330H100SALE
C-TBN335H100SALE
C-TBN340H100SALE
C-TBN345H100SALE
C-TBN350H100SALE
C-TBN355H100SALE
C-TBN360H100SALE
C-TBN365H100SALE
C-TBN370H100SALE
C-TBN375H100SALE
C-TBN380H100SALE
C-TBN385H100SALE
C-TBN390H100SALE
C-TBN395H100SALE
C-TBN400H100SALE
C-TBN405H100SALE
C-TBN410H100SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngBelt Width (mm)
(mm) 		Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

20,025 VND

17,021 VND

1 Piece(s) Available 13 Day(s) 25.41--

336,271 VND

285,830 VND

4 Piece(s) Available 8 Day(s) 25.412540200

250,782 VND

213,165 VND

4 Piece(s) Available 8 Day(s) 25.412590.8204

251,947 VND

214,155 VND

4 Piece(s) Available 8 Day(s) 25.412603.5205

352,765 VND

299,850 VND

4 Piece(s) Available 8 Day(s) 25.412667.00210

268,889 VND

228,556 VND

1 Piece(s) Available 13 Day(s) 25.41--

322,851 VND

274,423 VND

4 Piece(s) Available 8 Day(s) 25.412743.2216

369,188 VND

313,810 VND

4 Piece(s) Available 8 Day(s) 25.412794220

274,734 VND

233,524 VND

4 Piece(s) Available 8 Day(s) 25.412844.8224

277,103 VND

235,538 VND

4 Piece(s) Available 8 Day(s) 25.412870.2226

287,512 VND

244,385 VND

4 Piece(s) Available 8 Day(s) 25.412882.9227

382,395 VND

325,036 VND

4 Piece(s) Available 8 Day(s) 25.412895.60228

385,681 VND

327,829 VND

4 Piece(s) Available 8 Day(s) 25.412921.00230

284,272 VND

241,631 VND

4 Piece(s) Available 8 Day(s) 25.412946.4232

352,132 VND

299,312 VND

4 Piece(s) Available 8 Day(s) 25.412997.2236

402,172 VND

341,846 VND

4 Piece(s) Available 8 Day(s) 25.413048240

54,227 VND

46,093 VND

4 Piece(s) Available 8 Day(s) 25.41304.824

350,632 VND

298,037 VND

4 Piece(s) Available 8 Day(s) 25.413149.6248

418,630 VND

355,836 VND

4 Piece(s) Available 8 Day(s) 25.413175250

493,049 VND

419,092 VND

4 Piece(s) Available 8 Day(s) 25.413200.40252

310,592 VND

264,003 VND

4 Piece(s) Available 8 Day(s) 25.413225.8254

320,392 VND

272,333 VND

1 Piece(s) Available 13 Day(s) 25.41--

317,693 VND

270,039 VND

4 Piece(s) Available 8 Day(s) 25.413302260

323,735 VND

275,175 VND

4 Piece(s) Available 8 Day(s) 25.413365.5265

451,544 VND

383,812 VND

4 Piece(s) Available 8 Day(s) 25.413429270

338,348 VND

287,596 VND

1 Piece(s) Available 13 Day(s) 25.41--

468,035 VND

397,830 VND

4 Piece(s) Available 8 Day(s) 25.413556280

562,505 VND

478,129 VND

4 Piece(s) Available 8 Day(s) 25.413657.60288

353,620 VND

300,577 VND

4 Piece(s) Available 8 Day(s) 25.413683290

43,548 VND

37,016 VND

4 Piece(s) Available 8 Day(s) 25.41368.329

362,321 VND

307,973 VND

1 Piece(s) Available 13 Day(s) 25.41--

365,527 VND

310,698 VND

4 Piece(s) Available 8 Day(s) 25.413810300

367,964 VND

312,769 VND

4 Piece(s) Available 8 Day(s) 25.413835.40302

370,294 VND

314,750 VND

4 Piece(s) Available 8 Day(s) 25.413860.8304

377,504 VND

320,878 VND

4 Piece(s) Available 8 Day(s) 25.413937310

379,904 VND

322,918 VND

4 Piece(s) Available 8 Day(s) 25.413962.4312

389,477 VND

331,055 VND

4 Piece(s) Available 8 Day(s) 25.414064320

403,064 VND

342,604 VND

1 Piece(s) Available 13 Day(s) 25.41--

401,384 VND

341,176 VND

4 Piece(s) Available 8 Day(s) 25.414191330

652,544 VND

554,662 VND

4 Piece(s) Available 8 Day(s) 25.414267.2336

566,851 VND

481,823 VND

4 Piece(s) Available 8 Day(s) 25.414318340

48,953 VND

41,610 VND

4 Piece(s) Available 8 Day(s) 25.41431.834

425,300 VND

361,505 VND

4 Piece(s) Available 8 Day(s) 25.414445350

842,166 VND

715,841 VND

1 Piece(s) Available 13 Day(s) 25.41--

437,276 VND

371,685 VND

4 Piece(s) Available 8 Day(s) 25.414572360

720,665 VND

612,565 VND

4 Piece(s) Available 8 Day(s) 25.414699.00370

51,216 VND

43,534 VND

1 Piece(s) Available Same day 25.41469.937

562,777 VND

478,360 VND

4 Piece(s) Available 8 Day(s) 25.414826380

479,723 VND

407,765 VND

1 Piece(s) Available 13 Day(s) 25.41--

54,751 VND

46,538 VND

1 Piece(s) Available Same day 25.4150840

54,187 VND

46,059 VND

1 Piece(s) Available 13 Day(s) 25.41--

813,499 VND

691,474 VND

4 Piece(s) Available 8 Day(s) 25.415334.0420

76,065 VND

64,655 VND

1 Piece(s) Available Same day 25.41533.442

79,350 VND

67,448 VND

4 Piece(s) Available 8 Day(s) 25.41558.844

60,755 VND

51,642 VND

4 Piece(s) Available 8 Day(s) 25.41571.545

82,667 VND

70,267 VND

4 Piece(s) Available 8 Day(s) 25.41584.246

65,027 VND

55,273 VND

4 Piece(s) Available 8 Day(s) 25.41596.947

85,953 VND

73,060 VND

1 Piece(s) Available Same day 25.41609.648

78,579 VND

66,792 VND

4 Piece(s) Available 8 Day(s) 25.41622.349

66,690 VND

56,687 VND

4 Piece(s) Available 8 Day(s) 25.4163550

90,898 VND

77,263 VND

4 Piece(s) Available 8 Day(s) 25.41647.751

92,558 VND

78,674 VND

4 Piece(s) Available 8 Day(s) 25.41660.452

95,841 VND

81,465 VND

4 Piece(s) Available 8 Day(s) 25.41685.854

87,338 VND

74,237 VND

4 Piece(s) Available 8 Day(s) 25.41698.555

99,161 VND

84,287 VND

4 Piece(s) Available 8 Day(s) 25.41711.256

100,785 VND

85,667 VND

4 Piece(s) Available 8 Day(s) 25.41723.957

102,446 VND

87,079 VND

4 Piece(s) Available 8 Day(s) 25.41736.658

105,696 VND

89,842 VND

4 Piece(s) Available 8 Day(s) 25.4176260

78,077 VND

66,365 VND

1 Piece(s) Available 13 Day(s) 25.41--

109,049 VND

92,692 VND

4 Piece(s) Available 8 Day(s) 25.41787.462

110,639 VND

94,043 VND

4 Piece(s) Available 8 Day(s) 25.41800.163

112,335 VND

95,485 VND

4 Piece(s) Available 8 Day(s) 25.41812.864

84,636 VND

71,941 VND

4 Piece(s) Available 8 Day(s) 25.41825.565

115,582 VND

98,245 VND

1 Piece(s) Available Same day 25.41838.266

104,894 VND

89,160 VND

4 Piece(s) Available 8 Day(s) 25.41850.967

118,940 VND

101,099 VND

4 Piece(s) Available 8 Day(s) 25.41863.668

120,527 VND

102,448 VND

4 Piece(s) Available 8 Day(s) 25.41876.369

122,187 VND

103,859 VND

4 Piece(s) Available 8 Day(s) 25.4188970

94,667 VND

80,467 VND

4 Piece(s) Available 8 Day(s) 25.41901.771

125,472 VND

106,651 VND

4 Piece(s) Available 8 Day(s) 25.41914.472

94,174 VND

80,048 VND

4 Piece(s) Available 8 Day(s) 25.41927.173

128,790 VND

109,472 VND

4 Piece(s) Available 8 Day(s) 25.41939.874

130,416 VND

110,854 VND

4 Piece(s) Available 8 Day(s) 25.41952.575

97,778 VND

83,111 VND

4 Piece(s) Available 8 Day(s) 25.41965.276

98,945 VND

84,103 VND

4 Piece(s) Available 8 Day(s) 25.41977.977

135,359 VND

115,055 VND

4 Piece(s) Available 8 Day(s) 25.41990.678

137,019 VND

116,466 VND

4 Piece(s) Available 8 Day(s) 25.411003.3079

138,680 VND

117,878 VND

4 Piece(s) Available 8 Day(s) 25.41101680

103,782 VND

88,215 VND

4 Piece(s) Available 8 Day(s) 25.411028.781

141,964 VND

120,669 VND

4 Piece(s) Available 8 Day(s) 25.411041.482

Loading...Tải…

  1. 1
  2. 2
  3. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Type H Belt Shape Closed End Belt Material Rubber Belt
Belt Tooth Surface Standard (Single Sided) Core Wire Material Glass Fiber Belt Shape Type Trapezoidal Tooth Profile Circular Type
Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.