A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.

Is there any reference available for the selection of hole diameter at both ends of the product?

Equal diameter of d1 and d2=d1＋0.5 Unequal diameter of d1 and d2=diameter of large shaft hole+0.5

How to achieve the effect of applicable lateral misalignment and angular misalignment in product design?

The plate spring formed by the slit allows lateral misalignment, angular misalignment and end play.

What does the product need for applications of lateral misalignment and angular misalignment?

Lateral misalignment, angular misalignment and axial amplitude are all single allowable values. If there are multiple deviations at the same time, the allowable value of each deviation will be reduced to 1/2 of the original value.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

My Components Thêm v
Similar ProductsSản phẩm tương tự
Product Detail
CAD Data unavailable Dữ liệu CAD không khả dụng

ConfigureTạo

Part number has not been determine

(8 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-LMPL12-[3,4,5,6]-[3,4,5,6]

Shaft Bore Dia.1 d1 (or d) Shaft Bore Dia. 2 d2 (or d) O.D. Overall Length type Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia.1 d1 (or d)(Ø)
3

4

5

6

6.35

7

8

9

9.525

10

11

12

14

15

16

17

18

19

20

22

24

25

28

30

32

35

38

40
ClearTrống
Shaft Bore Dia. 2 d2 (or d)(Ø)
3

4

5

6

6.35

7

8

9

9.525

10

11

12

14

15

16

17

18

19

20

22

24

25

28

30

32

35

38

40
ClearTrống
O.D.(Ø)
12

16

20

25

32

40

50

63
ClearTrống
Overall Length(mm)
18.5

23

26

31

41

56

71

90
ClearTrống
type
- E-LMPL
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

10 Day(s) or Less

11 Day(s) or Less

16 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Slit Couplings Long, Set Screw Type (Part Number)

Name: Slit Couplings Long, Set Screw Type
Brand: MISUMI
Availability: PreOrder

Check FAQ of this product (5 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Data unavailable

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
There is an update in specs L, F, M of some products in March 2024, please refer the below link for the detailed changes.
"Notification"

Product Description

This is an economy item, The price is cheaper than the MISUMI standard product.

Product Overview

■ Feature
・Flexible Shaft Couplings zero backlash
・Flexible Shaft Couplings with completely integrated structure, featuring slits in cylindrical hub.
・Flexible Shaft Couplings extremely high torsional stiffness and low moment of inertia.
・The leaf springs formed by the slits allow for eccentricity, angular misalignment, and Axial Misalignment.
・Flexible Shaft Couplings suitable for use in actuators, precision XY stages, indexing tables, etc.

Dimensional Drawing

Material table

Type	Material	Surface Treatment	Accessory
E-LMPL	Aluminum Alloy	Clear Anodized	Set Screw

Specification Table

Please follow the selection steps Flexible Shaft Couplings

～

to select the part no. Specify Shaft Hole Dia. in therange d₁≤d_2.

Part No.(Type·D)	-	d₁	-	d₂
E-LMPL12	-	3	-	4
E-LMPL20	-	5	-	6

Part No.		d₁、d₂Shaft Hole Dia. (d₁≤d₂)																												L
Type	D	d₁、d₂Shaft Hole Dia. (d₁≤d₂)																												L
E-LMPL	12	3	4	5	6																									18.5
	16	3	4	5	6	6.35	7	8																						23
	20		4	5	6	6.35	7	8	9	9.525	10																			26*
	25			5	6	6.35	7	8	9	9.525	10	11	12																	31*
	32							8	9	9.525	10	11	12	14	15	16														41*
	40										10	11	12	14	15	16	17	18	19	20	22									56
	50												12	14	15	16	17	18	19	20	22	24	25	28	30	32				71
	63													14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40	90

If the slip torque is less than the allowable torque, use under the slip torque.
Flexible Shaft Couplings

*L dimension updated in March 2024

Part No.		L	F	Set Screw		Rated Torque	Mass
Type	D	L	F	M	Tightening Torque (N.m)	(N.m)	g
E-LMPL	12	18.5	2.5	M2.5	0.5	0.4	3.7
	16	23	3.0	M3	0.7	0.5	8.1
	20	25	3.0	M3	0.7	1	14
	25	30	4.0	M4	1.7	2	27
	32	40	5.0*	M5*	1.7	4	60
	40	56	6.0*	M6*	4.0	8	130
	50	71	8.0*	M6	7.0	13	266
	63	90	12.0*	M8*	15.0	22	500

*F dimension and M Set Screw size updated in March 2024

Product Features

Flexible Shaft Couplings with zero backlash, this product is suitable for applications where rotational accuracy is required.

Precautions

■ Calibration adjustment
1. The coupling allows transmission of axis deviation, rotation angle and torque, but if the axis deviation exceeds the allowable value, vibration may occur or the lifespan will be drastically reduced. Please be sure to make corrections.
2. Axial deviation includes eccentricity (parallel error of two axes), declination (angular error of two axes), and axial amplitude (axial movement of the axes).
Perform calibration adjustment for the shaft so that the shaft center deviation is below the allowable value specified in the product dimensions and performance table.
3. The axial deviation tolerance values stated in the dimensions and performance tables refer to the situation when one of eccentricity, declination, and axial amplitude occurs individually. If two or more axial deviations occursimultaneously, the respective allowable values are reduced by half.
4. Axial deviation not only occurs when assembling the device, but is also a major cause of vibration, thermal expansion, and bearing wear during operation.
It is recommended that the axis deviation be set to less than 1/3 of the allowable value.

Example of Use

: 30; 60; 90

Part Number
E-LMPL12-[3,4,5,6]-[3,4,5,6]
E-LMPL16-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]
E-LMPL20-[4,5,6,6.35,7,8,9,9.525,10]-[4,5,6,6.35,7,8,9,9.525,10]
E-LMPL25-[5,6,6.35,7,8,9,9.525,10,11,12]-[5,6,6.35,7,8,9,9.525,10,11,12]
E-LMPL32-[7,8,9,9.525,10,11,12,14,15,16]-[7,8,9,9.525,10,11,12,14,15,16]
E-LMPL40-[10,11,12,14,15,16,17,18,19,20,22]-[10,11,12,14,15,16,17,18,19,20,22]
E-LMPL50-[12,14,15,16,17,18,19,20,22,24,25,28,30,32]-[12,14,15,16,17,18,19,20,22,24,25,28,30,32]
E-LMPL63-[14,15,16,17,18,19,20,22,24,25,28,30,32,35,38,40]-[14,15,16,17,18,19,20,22,24,25,28,30,32,35,38,40]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	Shaft Bore Dia.1 d1 (or d) (Ø)	Shaft Bore Dia. 2 d2 (or d) (Ø)	O.D. (Ø)	Overall Length (mm)
-	1 Piece(s)	16 Day(s)	3 ～ 6	3 ～ 6	12	18.5
-	1 Piece(s)	10 Day(s)	3 ～ 8	3 ～ 8	16	23
-	1 Piece(s)	11 Day(s)	4 ～ 10	4 ～ 10	20	26
-	1 Piece(s)	11 Day(s)	5 ～ 12	5 ～ 12	25	31
-	1 Piece(s)	11 Day(s)	7 ～ 16	7 ～ 16	32	41
-	1 Piece(s)	11 Day(s)	10 ～ 22	10 ～ 22	40	56
-	1 Piece(s)	16 Day(s)	12 ～ 32	12 ～ 32	50	71
-	1 Piece(s)	16 Day(s)	14 ～ 40	14 ～ 40	63	90

Loading...Tải…

Basic InformationThông tin cơ bản

Series Name	Slit	Application	Standard / For Servo Motors / Stepping Motor	Features	Zero Backlash / Low Moment of Inertia
Allowable Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	Body Material	Aluminum Alloy	Allowable Angular Misalignment(deg)	1
Product Category	Coupling Main Body	Shaft Tightening Method	Set Screw	Type	Standard

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What is a coupling?: Answer:Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.
Question:Question: Is there any reference available for the selection of hole diameter at both ends of the product?: Answer:Answer: Equal diameter of d1 and d2=d1＋0.5
Unequal diameter of d1 and d2=diameter of large shaft hole+0.5
Question:Question: How to achieve the effect of applicable lateral misalignment and angular misalignment in product design?: Answer:Answer: The plate spring formed by the slit allows lateral misalignment, angular misalignment and end play.
Question:Question: Which mechanism parts does the product apply to?: Answer:Answer: With zero backlash, it is suitable for applications where rotational accuracy is required.
Question:Question: What does the product need for applications of lateral misalignment and angular misalignment?: Answer:Answer: Lateral misalignment, angular misalignment and axial amplitude are all single allowable values. If there are multiple deviations at the same time, the allowable value of each deviation will be reduced to 1/2 of the original value.

Check other FAQ (2 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh