A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.

Which disc type coupling is better, single disc type or double disc type?

Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase. Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure. Special attention should be paid to centering during use.

Abnormal sound or vibration occurs during use of disc type coupling.

When a servo motor is used, the frequency of the mechanical resonance suppression filter is set as its inherent vibration frequency in the control system to suppress sound and vibration. When using a stepping motor, the rotational speed can be finely adjusted, or the vibration can be absorbed and suppressed by the high damping rubber type coupling with obvious attenuation effect.

How to achieve the effect of applicable lateral misalignment and angular misalignment in product design?

The plate spring formed by the slit allows lateral misalignment, angular misalignment and end play.

What does the product need for applications of lateral misalignment and angular misalignment?

Lateral misalignment, angular misalignment and axial amplitude are all single allowable values. If there are multiple deviations at the same time, the allowable value of each deviation will be reduced to 1/2 of the original value.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

My Components Thêm v
Similar ProductsSản phẩm tương tự
Product Detail
CAD Data unavailable Dữ liệu CAD không khả dụng

ConfigureTạo

Part number has not been determine

(14 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-LMCPS12-[3,4,5]-[3,4,5]

Shaft Bore Dia.1 d1 (or d) Shaft Bore Dia. 2 d2 (or d) O.D. Overall Length Allowable Torque Allowable Lateral Misalignment Max. Rotational Speed type Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia.1 d1 (or d)(Ø)
3

4

5

6

6.35

7

8

9

9.525

10

11

12

12.7

13

14

15

16

17

18

19

20

22

24

25

28

30

32

35

38

40

42
ClearTrống
Shaft Bore Dia. 2 d2 (or d)(Ø)
3

4

5

6

6.35

7

8

9

9.525

10

11

12

12.7

13

14

15

16

17

18

19

20

22

24

25

28

30

32

35

38

40

42
ClearTrống
O.D.(Ø)
12

16

19

20

26

29

32

33

34

39

44

56

68

82
ClearTrống
Overall Length(mm)
12.35

17

20

23

25.7

26

28

28.5

32

34.5

45

53

68
ClearTrống
Allowable Torque(N•m)
0.25

0.6

1

2

6

13

15

28

60

100
ClearTrống
Allowable Lateral Misalignment(mm)
0.01

0.02

0.1
ClearTrống
Max. Rotational Speed(r/min)
8000

9000

10000
ClearTrống
type
- E-LMCPS
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

8 Day(s) or Less

11 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Single Disc Couplings Clamping Type

Name: Single Disc Couplings Clamping Type
Brand: MISUMI
Availability: PreOrder

Check FAQ of this product (5 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

E-LMCPS12-[3,4,5]-[3,4,5]

E-LMCPS16-[3,4,5,6]-[3,4,5,6]

E-LMCPS19-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]

E-LMCPS20-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]

E-LMCPS26-[3,4,5,6,6.35,7,8,9,9.525,10,11,12,13,14]-[3,4,5,6,6.35,7,8,9,9.525,10,11,12,13,14]

E-LMCPS29-[5,6,6.35,7,8,9,9.525,10,11,12,14]-[5,6,6.35,7,8,9,9.525,10,11,12,14]

E-LMCPS32-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,14,15]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,14,15]

E-LMCPS33-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15]

E-LMCPS34-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]

E-LMCPS39-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19]-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19]

E-LMCPS44-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22,24]-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22,24]

E-LMCPS56-[10,12,14,15,16,17,18,19,20,22,24,25,28,30,32]-[10,12,14,15,16,17,18,19,20,22,24,25,28,30,32]

E-LMCPS68-[12,14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]-[12,14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]

E-LMCPS82-[17,18,19,20,22,24,25,28,30,32,35,38,40,42]-[17,18,19,20,22,24,25,28,30,32,35,38,40,42]

E-LMCPS12-[3,4,5]-[3,4,5]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Data unavailable

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.

Product Description

This is an economy item, The price is cheaper than the MISUMI standard product.

Product Overview of Flexible Shaft Flexible Shaft Couplings

Flexible Shaft Flexible Shaft Couplings is made of several sets of discs (stainless steel sheet) bolted staggered with two Flexible Shaft Couplings halves, each set of discs by several pieces of stacked set.
The Flexible Shaft Flexible Shaft Couplings relies on the elastic deformation of the disc to compensate for the relative displacement of the two shafts connected, is a high-performance flexible Flexible Shaft Couplings with strong metal components.
It is characterized by compact structure, zero backlash, high strength, long service life, no rotating clearance, unaffected by temperature and oil, acid and alkali resistant and corrosion resistant.
Applicable motor types : Recommended for servo motors, stepper motors and general motors.

Dimensional Drawing of Flexible Shaft Flexible Shaft Couplings

Flexible Shaft Flexible Shaft Couplings Type
Drawing

Material table

Type	Part	Material	Surface Treatment	Accessory
E-LMCPS	Hub	Aluminum Alloy	Clear Anodize	Hex Socket Clamp Screw
E-LMCPS	Disk	Stainless Steel	-	Hex Socket Clamp Screw

Specification Table of Flexible Shaft Flexible Shaft Couplings

Please follow the selection steps Flexible Shaft Flexible Shaft Couplings

～

to select the part no. Please specify the shaft hole diameterwithin the range of d1≤d2.

Part No.(Type·D)	-	d₁	-	d₂
E-LMCPS12	-	3	-	5
E-LMCPS20	-	4	-	6

Part No.		d₁、d₂Shaft Hole Dia.(d₁≤d₂)																														L
Type	D	d₁、d₂Shaft Hole Dia.(d₁≤d₂)																														L
E-LMCPS	12	3	4	5																												12.35
	16	3	4	5	6																											17
	19	3	4	5	6	6.35	7	8																								20
	20	3	4	5	6	6.35	7	8																								23
	26	3	4	5	6	6.35	7	8	9	9.525	10	11	12		14																	26
	29			5	6	6.35	7	8	9	9.525	10	11	12																			25.7
	32			5	6	6.35	7	8	9	9.525	10	11	12	12.7	14	15																28
	33			5	6	6.35	7	8	9	9.525	10	11	12	12.7	14	15																28.5
	34			5	6	6.35		8	9	9.525	10	11	12	12.7	14	15	16															32
	39							8	9	9.525	10	11	12	12.7	14	15	16	17	18	19												34.5
	44							8	9	9.525	10	11	12	12.7	14	15	16	17	18	19	20	22	24									34.5
	56										10		12		14	15	16	17	18	19	20	22	24	25	28	30	32					45
	68												12		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38			53
	82																	17	18	19	20	22	24	25	28	30	32	35	38	40	42	68

Part No.		L	F	Clamp Screw		Rated Torque (N·m)	Mass (g)
Type	D	L	F	M	Tightening torque N.m	Rated Torque (N·m)	Mass (g)
E-LMCPS	12	12.35	2.2	M1.6	0.23~0.28	0.25	3
	16	17	2.6	M2	0.4~0.5	0.6	7
	19	20	3.2	M2.5	1	1	11
	20	23	3.2	M2.5	1	1	20
	26	26	4	M3	1.5	2	28
	29	25.7	4	M3	1.5	2	35
	32	28	4	M3	1.5	6	46
	33	28.5	4	M3	1.5	6	50
	34	32	5	M4	3.5	6	55
	39	34.5	5.2	M4	3.5	13	81
	44	34.5	5.2	M4	3.5	15	99
	56	45	6.3	M5	8	25	217
	68	53	7.7	M6	13	60	348
	82	68	9.8	M8	28	80	689

Alterations of Flexible Shaft Flexible Shaft Couplings

Shaft Hole Dia. d₁ · d₂	b(Keyway Width)		t Keyway Depth	Keyway Nominal Dim. b X h
Shaft Hole Dia. d₁ · d₂	LK	RK	t Keyway Depth	Keyway Nominal Dim. b X h
6 ~ 7.9	2	2	1	2x2
8～10	3	3	1.4	3x3
11～12	4	4	1.8	4x4
13～17	5	5	2.3	5x5
18～22	6	6	2.8	6x6
23～30	8	8	3.3	8x7
31～38	10	10	3.3	10x8
39～44	12	12	3.3	12x8

Product Features of Flexible Shaft Flexible Shaft Couplings

■ Main characteristics of Flexible Shaft Flexible Shaft Couplings
1. Flexible Shaft Flexible Shaft Couplings has strong capability to compensate for misalignment of two shafts, offering twice the angular displacement compared to Jaw Flexible Shaft Couplings, lower reactionary forces during radial displacement, high flexibility, and allows for certain axial,radial, and angular displacements.
2. Flexible Shaft Flexible Shaft Couplings has provides significant vibration damping effects, operates without noise, and wear-free.
3. Flexible Shaft Flexible Shaft Couplings can safely operate under conditions of shock and vibration.
4. Flexible Shaft Flexible Shaft Couplings has high transmission efficiency, up to 99.86%, particularly suitable for medium and high-speed, high-power transmission.
5. Flexible Shaft Flexible Shaft Couplings is simple structure, lightweight, small volume, and convenient for assembly and disassembly. Installation and removal can be done without moving the machine (refers to the type with an intermediate shaft) and does not require lubrication.
6. Can accurately transmit rotational speed, operates without slip, suitable for the transmission of precision machinery.

Example Use of Flexible Shaft Flexible Shaft Couplings

Precautions of Flexible Shaft Flexible Shaft Couplings

■ Calibration adjustment of Flexible Shaft Flexible Shaft Couplings
1. The Flexible Shaft Couplings allows shaft center deviation and transmits rotation angle and torque. However, when the shaft center deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced.
2. Axis deviation includes eccentricity (parallel error of two axes), declination (angular error of two axes), and axial amplitude (axial movement of the shaft).
Please calibrate and adjust the shaft to ensure that the axis center deviation is below the allowable value stated in the dimensions and performance table of each product.
3. The allowable value of axial misalignment stated in the dimensions and performance table refers to the situation when one of eccentricity, declination, or axial amplitude occurs alone.
When more than two axis deviations occur at the same time, the corresponding allowable values will be halved respectively.
4. Axial misalignment not only occurs when assembling to the device, but also occurs due to vibration, thermal expansion, bearing wear, etc. during operation. Therefore, it is recommended to set the axis deviation to less than 1/3 of theallowable value.

: 30; 45; 60

Part Number
E-LMCPS12-[3,4,5]-[3,4,5]
E-LMCPS16-[3,4,5,6]-[3,4,5,6]
E-LMCPS19-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]
E-LMCPS20-[3,4,5,6,6.35,7,8]-[3,4,5,6,6.35,7,8]
E-LMCPS26-[3,4,5,6,6.35,7,8,9,9.525,10,11,12,13,14]-[3,4,5,6,6.35,7,8,9,9.525,10,11,12,13,14]
E-LMCPS29-[5,6,6.35,7,8,9,9.525,10,11,12,14]-[5,6,6.35,7,8,9,9.525,10,11,12,14]
E-LMCPS32-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,14,15]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,14,15]
E-LMCPS33-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15]
E-LMCPS34-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]-[5,6,6.35,7,8,9,9.525,10,11,12,12.7,13,14,15,16]
E-LMCPS39-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19]-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19]
E-LMCPS44-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22,24]-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20,22,24]
E-LMCPS56-[10,12,14,15,16,17,18,19,20,22,24,25,28,30,32]-[10,12,14,15,16,17,18,19,20,22,24,25,28,30,32]
E-LMCPS68-[12,14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]-[12,14,15,16,17,18,19,20,22,24,25,28,30,32,35,38]
E-LMCPS82-[17,18,19,20,22,24,25,28,30,32,35,38,40,42]-[17,18,19,20,22,24,25,28,30,32,35,38,40,42]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	Shaft Bore Dia.1 d1 (or d) (Ø)	Shaft Bore Dia. 2 d2 (or d) (Ø)	O.D. (Ø)	Overall Length (mm)	Allowable Torque (N•m)	Allowable Lateral Misalignment (mm)	Max. Rotational Speed (r/min)	Allowable Axial Misalignment (mm)	Moment of Inertia (kg･m²)
-	2 Piece(s)	8 Day(s)	3 ～ 5	3 ～ 5	12	12.35	0.25	0.01	10000	±0.08	5.9×10^-8
-	2 Piece(s)	8 Day(s)	3 ～ 6	3 ～ 6	16	17	0.6	0.02	10000	±0.1	2.63×10^-7
-	2 Piece(s)	8 Day(s)	3 ～ 8	3 ～ 8	19	20	1	0.1	10000	±0.18	6.7×10^-7
-	1 Piece(s)	11 Day(s)	3 ～ 8	3 ～ 8	20	23	1	0.1	10000	±0.20	2.2×10^-6
-	2 Piece(s)	8 Day(s)	3 ～ 14	3 ～ 14	26	26	2	0.1	10000	±0.30	2.2×10^-6
-	2 Piece(s)	8 Day(s)	5 ～ 14	5 ～ 14	29	25.7	2	0.1	10000	±0.30	6.7×10^-6
-	2 Piece(s)	8 Day(s)	5 ～ 15	5 ～ 15	32	28	6	0.1	10000	±0.36	7.1×10^-6
-	2 Piece(s)	8 Day(s)	5 ～ 15	5 ～ 15	33	28.5	6	0.1	10000	±0.40	7.8×10^-6
-	2 Piece(s)	8 Day(s)	5 ～ 16	5 ～ 16	34	32	6	0.1	10000	±0.36	8.0×10^-6
-	2 Piece(s)	8 Day(s)	8 ～ 19	8 ～ 19	39	34.5	13	0.1	10000	±0.45	2.2×10^-5
-	2 Piece(s)	8 Day(s)	8 ～ 24	8 ～ 24	44	34.5	15	0.1	10000	±0.54	2.8×10^-5
-	2 Piece(s)	8 Day(s)	10 ～ 32	10 ～ 32	56	45	28	0.1	10000	±0.72	1.2×10^-4
-	2 Piece(s)	8 Day(s)	12 ～ 38	12 ～ 38	68	53	60	0.1	9000	±0.80	1.5×10^-4
-	2 Piece(s)	8 Day(s)	17 ～ 42	17 ～ 42	82	68	100	0.1	8000	±0.80	1.8×10^-4

Loading...Tải…

Basic InformationThông tin cơ bản

Series Name	Disc	Application	For Servo Motors / Stepping Motor	Features	High Torsional Rigidity / High Torque Type
Allowable Misalignment	Angular Misalignment / Eccentricity / Axial Misalignment	Body Material	Aluminum Alloy	Product Category	Coupling Main Body
Disc Material	Stainless Steel	Single/Double	Single Disc	Shaft Tightening Method	Fastening Bolt
Shaft Hole Shape	Standard

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: What is a coupling?: Answer:Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.
Question:Question: Which disc type coupling is better, single disc type or double disc type?: Answer:Answer: Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase.
Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure.
Special attention should be paid to centering during use.
Question:Question: Abnormal sound or vibration occurs during use of disc type coupling.: Answer:Answer: When a servo motor is used, the frequency of the mechanical resonance suppression filter is set as its inherent vibration frequency in the control system to suppress sound and vibration.
When using a stepping motor, the rotational speed can be finely adjusted, or the vibration can be absorbed and suppressed by the high damping rubber type coupling with obvious attenuation effect.
Question:Question: How to achieve the effect of applicable lateral misalignment and angular misalignment in product design?: Answer:Answer: The plate spring formed by the slit allows lateral misalignment, angular misalignment and end play.
Question:Question: What does the product need for applications of lateral misalignment and angular misalignment?: Answer:Answer: Lateral misalignment, angular misalignment and axial amplitude are all single allowable values. If there are multiple deviations at the same time, the allowable value of each deviation will be reduced to 1/2 of the original value.

Check other FAQ (2 items) HideĐóng.

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Shaft Bore Dia.1 d1 (or d)(Ø)

Shaft Bore Dia. 2 d2 (or d)(Ø)

O.D.(Ø)

Overall Length(mm)

Allowable Torque(N•m)

Allowable Lateral Misalignment(mm)

Max. Rotational Speed(r/min)

type

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Single Disc Couplings Clamping Type

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Product Overview of Flexible Shaft Flexible Shaft Couplings

Dimensional Drawing of Flexible Shaft Flexible Shaft Couplings

Specification Table of Flexible Shaft Flexible Shaft Couplings

Alterations of Flexible Shaft Flexible Shaft Couplings

Product Features of Flexible Shaft Flexible Shaft Couplings

Example Use of Flexible Shaft Flexible Shaft Couplings

Precautions of Flexible Shaft Flexible Shaft Couplings

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng