(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

?

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译 此翻譯是Google翻譯

Chat Start chat
  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
  • Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
  • Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(24 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

SH-HBLFSSW8
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Cleaning Method

    • Degreasing
    • Precision Cleaning
    • Electrolytic polishing + precision cleaning

    ClearTrống

  • Mounting Hole Alteration for Covers

    • C (Cover mounting tapping)
    • N/A

    ClearTrống

  • Accessory

    • N/A
    • SSP (Stainless steel bolt / post-assembly insertion spring nut set)
    • SST (Stainless steel bolt / nut set)
    • SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

    ClearTrống

  • type

    • SH-HBLFSSW8
    • SHD-HBLFSSW8
    • SL-HBLFSSW8

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

[Clean & Pack]8 Series (Slot Width 10 mm) - For 1 Slot, Reversal Tabbed Brackets, 4-Mounting Hole Type

[Clean & Pack]8 Series (Slot Width 10 mm) - For 1 Slot, Reversal Tabbed Brackets, 4-Mounting Hole Type
  • Volume Discount
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MISUMI

Part Number :
24 Part Numbers Available

SH-HBLFSSW8

SH-HBLFSSW8-C

SH-HBLFSSW8-C-SSP

SH-HBLFSSW8-C-SST

SH-HBLFSSW8-C-SSU

SH-HBLFSSW8-SSP

SH-HBLFSSW8-SST

SH-HBLFSSW8-SSU

SHD-HBLFSSW8

SHD-HBLFSSW8-C

SHD-HBLFSSW8-C-SSP

SHD-HBLFSSW8-C-SST

SHD-HBLFSSW8-C-SSU

SHD-HBLFSSW8-SSP

SHD-HBLFSSW8-SST

SHD-HBLFSSW8-SSU

SL-HBLFSSW8

SL-HBLFSSW8-C

SL-HBLFSSW8-C-SSP

SL-HBLFSSW8-C-SST

SH-HBLFSSW8
SH-HBLFSSW8

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      127,331VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

CAD Download
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
My Components
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
My Components
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
Similar ProductsSimilar Products
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
Product DetailProduct Detail

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■ Part Number for Clean & Pack Products
· Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□
· Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□
Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process
SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
Post battery assembly process
SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removal		 Clean environment (Class 10 to 1,000) Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reduction		 Vacuum environment
Clean environment (Class 10 to 1,000)		 Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Brackets with two mounting holes on one side can connect extrusions more securely.

Part Number[ M ] MaterialCleaning Method
Cleaning MethodCleaning EnvironmentPackaging TypePacking Environment
SL-HBLFSSW8ADC12DegreasingGeneral environmentAnti-rust packingGeneral environment
SH-HBLFSSW8Precision cleaningClass 1,000Degassing double packingClass 10
SHD-HBLFSSW8Electrolytic polishing + precision cleaning
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.

Specification Table

Part Number
SL-HBLFSSW8
Part NumberMassApplicable Screw, T NutAllowable Load
(g)BoltQuantityT NutQuantity(N)
SL-HBLFSSW8105SCB8-204HNTTSN8-843087
SH-HBLFSSW8
SHD-HBLFSSW8
[ ! ] If you would like to order screws and nuts as a set, please check the alteration "Applicable Screw, Nut Set."

Alterations

Part Number—(C·SST·SSU·SSP)
SL-HBLFSSW8—SST
SL-HBLFSSW8—C-SST
AlterationsCodeSpec.Applicable Bracket
Mounting Hole
Alteration for Cover		CAdds taps on
a bracket for cover mounting.
(M5 on Both Sides)
(Mounting Screw HCBM)
HBLFSH8
HBLFSSW8
App. Example
■Example of Cover Mounting
 ● Specify alteration code C.
 
AlterationsCodeSpec.Applicable Bracket
Applicable Bolts
and Nuts Set		SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nut
Stainless Steel)
SSP
(Post-Assembly Insertion
Spring Nut
Stainless Steel)		Applicable bolts and nuts for fixing the brackets on extrusions come in a set.

(Example) When HBLFSSW8 is specified
 BoltNut
CodePart NumberQuantityPart NumberQuantity
SSTSCB8－204HNTTSN8－84
SSUSCB8－20SHNTU8－8
SSPSCB8－20SHNTP8－8
 

[ ! ] When specifying other than HBLFSSW8, check for the applicable screws and nuts.
　

—
HBLFSH8
HBLFSSW8
[ ! ] The part numbers are those of the products before cleaning.

Alteration Details

■Mounting Hole Alteration for Cover (-C)

M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBLFSSW8-C

 

■Set of applicable Screws and Nuts Details

Alteration part numberBoltNut
Part NumberMaterialTypePart NumberMaterialStopper
SSTSCB8-20Stainless SteelPre-AssemblyHNTTSN8-8Stainless SteelNone
SSUSCB8-20Stainless SteelPre-AssemblySHNTU8-8Stainless SteelProvided
SSPSCB8-20Stainless SteelPost-AssemblySHNTP8-8Stainless SteelProvided

App. Example

Features: This type has tabs to fit extrusions and stop when tightening.
Since the tabs stop rotating the brackets when tightening, work efficiency is improved.

 
Can be connected in parallel and perpendicular directions to the extrusion slot.

Technical Information


■How to Specify Allowable Load of Bracket

 
This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment


Hydrocarbon cleaning Ro water cleaning
Neutral Detergent Cleaning
High-pressure jet washing (Ro water) followed by pure water cleaning
Oil-free Compressor Used
Anti-rust single packing
· Precision cleaning (Part Number: SH-□□)
 

Working Environment: Class 1,000

 

Working Environment: Class 10


Hydrocarbon cleaning Ro water cleaning
Neutral Detergent Cleaning
High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning
Use pure water (13 MΩ·cm)
Use nitrogen blow
Conducted on a clean bench in a Class 10 clean environment
· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
 

Working Environment: Class 1,000

 

Working Environment: Class 10


Hydrocarbon cleaning
Ro water cleaning
Neutral Detergent Cleaning
Electrolytic polishing with an electrolytic polishing layer according to the material
High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning
Use warm pure water (13 MΩ·cm)
Use nitrogen blow
Conducted on a clean bench in a Class 10 clean environment
Packaging Example
For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.		For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.
 
Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method

Product Part Number

Packaging Type

Effects Compared to Uncleaned Product

Environment (Standard)

Use Case and Process

DegreasingSL-□□Anti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
Precision cleaningSH-□□Degassing double packingOil removal
Dust removal		Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
Electrolytic polishing + precision cleaningSHD-□□Degassing double packingOil removal
Dust removal
Outgas reduction		Vacuum environment
Clean environment (Class 10 to 1,000)		Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
45
60
  1. 1
Part Number
SH-HBLFSSW8
SH-HBLFSSW8-C
SH-HBLFSSW8-C-SSP
SH-HBLFSSW8-C-SST
SH-HBLFSSW8-C-SSU
SH-HBLFSSW8-SSP
SH-HBLFSSW8-SST
SH-HBLFSSW8-SSU
SHD-HBLFSSW8
SHD-HBLFSSW8-C
SHD-HBLFSSW8-C-SSP
SHD-HBLFSSW8-C-SST
SHD-HBLFSSW8-C-SSU
SHD-HBLFSSW8-SSP
SHD-HBLFSSW8-SST
SHD-HBLFSSW8-SSU
SL-HBLFSSW8
SL-HBLFSSW8-C
SL-HBLFSSW8-C-SSP
SL-HBLFSSW8-C-SST
SL-HBLFSSW8-C-SSU
SL-HBLFSSW8-SSP
SL-HBLFSSW8-SST
SL-HBLFSSW8-SSU
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngCleaning Method Mounting Hole Alteration for Covers Accessory

146,624 VND

1 Piece(s) Available 6 Day(s) or more Precision CleaningN/AN/A

156,270 VND

1 Piece(s) Available 6 Day(s) or more Precision CleaningC (Cover mounting tapping)N/A

225,723 VND

1 Piece(s) Available 6 Day(s) or more Precision CleaningC (Cover mounting tapping)SSP (Stainless steel bolt / post-assembly insertion spring nut set)

208,360 VND

1 Piece(s) Available 6 Day(s) or more Precision CleaningC (Cover mounting tapping)SST (Stainless steel bolt / nut set)

243,087 VND

1 Piece(s) Available 6 Day(s) or more Precision CleaningC (Cover mounting tapping)SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

221,227 VND

1 Piece(s) Available 6 Day(s) or more Precision CleaningN/ASSP (Stainless steel bolt / post-assembly insertion spring nut set)

198,714 VND

1 Piece(s) Available 6 Day(s) or more Precision CleaningN/ASST (Stainless steel bolt / nut set)

237,433 VND

1 Piece(s) Available 6 Day(s) or more Precision CleaningN/ASSU (Stainless steel bolt / pre-assembly insertion spring nut set)

166,352 VND

1 Piece(s) Available 6 Day(s) or more Electrolytic polishing + precision cleaningN/AN/A

172,669 VND

1 Piece(s) Available 6 Day(s) or more Electrolytic polishing + precision cleaningC (Cover mounting tapping)N/A

257,980 VND

1 Piece(s) Available 6 Day(s) or more Electrolytic polishing + precision cleaningC (Cover mounting tapping)SSP (Stainless steel bolt / post-assembly insertion spring nut set)

229,909 VND

1 Piece(s) Available 6 Day(s) or more Electrolytic polishing + precision cleaningC (Cover mounting tapping)SST (Stainless steel bolt / nut set)

274,475 VND

1 Piece(s) Available 6 Day(s) or more Electrolytic polishing + precision cleaningC (Cover mounting tapping)SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

255,086 VND

1 Piece(s) Available 6 Day(s) or more Electrolytic polishing + precision cleaningN/ASSP (Stainless steel bolt / post-assembly insertion spring nut set)

226,147 VND

1 Piece(s) Available 6 Day(s) or more Electrolytic polishing + precision cleaningN/ASST (Stainless steel bolt / nut set)

271,291 VND

1 Piece(s) Available 6 Day(s) or more Electrolytic polishing + precision cleaningN/ASSU (Stainless steel bolt / pre-assembly insertion spring nut set)

129,310 VND

1 Piece(s) Available 6 Day(s) or more DegreasingN/AN/A

127,331 VND

1 Piece(s) Available 6 Day(s) or more DegreasingC (Cover mounting tapping)N/A

220,938 VND

1 Piece(s) Available 6 Day(s) or more DegreasingC (Cover mounting tapping)SSP (Stainless steel bolt / post-assembly insertion spring nut set)

192,867 VND

1 Piece(s) Available 6 Day(s) or more DegreasingC (Cover mounting tapping)SST (Stainless steel bolt / nut set)

237,433 VND

1 Piece(s) Available 6 Day(s) or more DegreasingC (Cover mounting tapping)SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

218,044 VND

1 Piece(s) Available 6 Day(s) or more DegreasingN/ASSP (Stainless steel bolt / post-assembly insertion spring nut set)

189,105 VND

1 Piece(s) Available 6 Day(s) or more DegreasingN/ASST (Stainless steel bolt / nut set)

234,250 VND

1 Piece(s) Available 6 Day(s) or more DegreasingN/ASSU (Stainless steel bolt / pre-assembly insertion spring nut set)
Part Number
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngCleaning Method Mounting Hole Alteration for Covers Accessory

Loading...Tải…

  1. 1

App. Example

Can be connected in parallel and perpendicular directions to the extrusion slot.

Basic InformationThông tin cơ bản

Bracket Type Tabbed Brackets Environmentally Friendly RoHS compliant (10 substances) Additional Functions (Tabbed Bracket) Standard
Properties / applications Clean washing Tab Position Tabbed at Both Sides Compatible Extrusion Width(mm) 40 / 45 / 50 / 60 / 80 / 100 / 120 / 160 / 180 / 200
Compatible No. of Slots 1 Slot Perpendicularity With standard Series MISUMI Brackets for 8 Series (Extrusion Slot Width 10mm)
Material ADC12 Extrusion No. 8 Extrusion Size for 40・80
Bracket Type Tabbed Reversal Brackets Applicable Screws M8 bolt Number of Extrusion Connection Holes 4

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.

Close

Comparison list