(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

?

This translation is a Google translation Dịch tự động bởi Google 이 번역은 Google 번역입니다 此翻译是Google翻译 此翻譯是Google翻譯

Chat Start chat
  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
  • Thông báo: Cập nhật hệ thống Hải quan và Thuế có thể gây chậm trễ trong giao hàng. Xem chi tiết.
  • Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(32 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

SH-HBLUDW8
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Perpendicularity

    • With standard
    • No Standard

    ClearTrống

  • Cleaning Method

    • Degreasing
    • Precision Cleaning

    ClearTrống

  • Material

    • A6N01SS-T5
    • A6063S-T5

    ClearTrống

  • Mounting Hole Alteration for Covers

    • C (Cover mounting tapping)
    • N/A

    ClearTrống

  • Accessory

    • N/A
    • SSP (Stainless steel bolt / post-assembly insertion spring nut set)
    • SST (Stainless steel bolt / nut set)
    • SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

    ClearTrống

  • type

    • SH-HBLUDW8
    • SH-NBLUDW8
    • SL-HBLUDW8
    • SL-NBLUDW8

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

[Clean & Pack]8 Series (Slot Width 10 mm) - For 2 Slots, Extruded Ultra Thick Brackets, 8-Mounting Hole Type

[Clean & Pack]8 Series (Slot Width 10 mm) - For 2 Slots, Extruded Ultra Thick Brackets, 8-Mounting Hole Type
  • Volume Discount
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MISUMI

Part Number :
32 Part Numbers Available

SH-HBLUDW8

SH-HBLUDW8-C

SH-HBLUDW8-C-SSP

SH-HBLUDW8-C-SST

SH-HBLUDW8-C-SSU

SH-HBLUDW8-SSP

SH-HBLUDW8-SST

SH-HBLUDW8-SSU

SH-NBLUDW8

SH-NBLUDW8-C

SH-NBLUDW8-C-SSP

SH-NBLUDW8-C-SST

SH-NBLUDW8-C-SSU

SH-NBLUDW8-SSP

SH-NBLUDW8-SST

SH-NBLUDW8-SSU

SL-HBLUDW8

SL-HBLUDW8-C

SL-HBLUDW8-C-SSP

SL-HBLUDW8-C-SST

SH-HBLUDW8
SH-HBLUDW8

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      235,370VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
    Please be careful about the application location and storage environment.

CAD Download
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
My Components
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
My Components
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
Similar ProductsSimilar Products
  • Order Qty.Số lượng đặt hàng :

    Check Price / Days to ship

  • PriceĐơn giá :
    ---
  • Total PriceTổng合計합계 :
    ---
  • Days to shipThời gian xuất hàng出荷日출하일 :
    ---
Product DetailProduct Detail

Product Description

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■ Part Number for Clean & Pack Products
· Degreasing (Anti-rust single packing)　　　　 : Part Number SL-□□
· Precision cleaning (Degassing double packing)　　　　 : Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing) : Part Number SHD-□□
Product Part Number Cleaning Method Packaging Type Effects Compared to Uncleaned Product Environment (Standard) Process
SL-□□ Degreasing Anti-rust packing Oil removal General environment Regular assembly process
Post battery assembly process
SH-□□ Precision cleaning Degassing double packing Oil removal
Dust removal		 Clean environment (Class 10 to 1,000) Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
SHD-□□ Electrolytic polishing + precision cleaning Degassing double packing Oil removal
Dust removal
Outgas reduction		 Vacuum environment
Clean environment (Class 10 to 1,000)		 Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process
■ Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Brackets to connect extrusions with 2 slots using one bracket.

[ ! ] Both sides and bolt holes of SL-NBLUDW8 and SH-NBLUDW8 are not anodized.

Part Number[ M ] Material[ S ] Surface treatmentCleaning Method
Cleaning MethodCleaning EnvironmentPackaging TypePacking Environment
SL-NBLUDW8A6063S−T5AnodizeDegreasingGeneral environmentAnti-rust packingGeneral environment
SH-NBLUDW8Precision cleaningClass 1,000Degassing double packingClass 10
SL-HBLUDW8A6N01SS−T5DegreasingGeneral environmentAnti-rust packingGeneral environment
SH-HBLUDW8Precision cleaningClass 1,000Degassing double packingClass 10
[!] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[!] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.

Specification Table

Part Number
SL-NBLUDW8
SH-HBLUDW8
Part NumberMassApplicable Screw, T NutAllowable Load
(g)BoltQuantityT NutQuantity(N)
SL-NBLUDW8332SCB8-154HNTTSN8-885586
SCB8-25
SH-NBLUDW8SCB8-15
SCB8-25
SL-HBLUDW8332SCB8-15485586
SCB8-25
SH-HBLUDW8SCB8-15
SCB8-25
[ ! ] If you would like to order screws and nuts as a set, please check the alteration "Applicable Screw, Nut Set."

Alterations

Part Number—(C·SST·SSU·SSP)
SL-NBLUDW8—SST
SL-NBLUDW8—C-SST
AlterationsCodeSpec.Applicable Bracket
Mounting Hole Alteration for CoverCAdds taps on a bracket for cover mounting.
(M5 on Both Sides, Depth 15 mm)
(Mounting Screw HCBM)
NBLTD8
HBLTD8
CHBLTD8
HBLTDW8
HBLUD8
NBLUDW8
HBLUDW8
AlterationsCodeSpec.Applicable Bracket
Applicable Screws and Nuts Set
SST
(Stainless Steel)
SSU
(Pre-Assembly Insertion
Spring Nut
Stainless Steel)
SSP
(Post-Assembly Insertion
Spring Nut
Stainless Steel)		Applicable screws and nuts for fixing the brackets on extrusions come in a set.
(Example) When HBLTD8 is specified
 BoltNut
CodePart NumberQuantityPart NumberQuantity
SSTSCB8－204HNTTSN8－84
SSUSCB8－20SHNTU8－8
SSPSCB8－20SHNTP8－8
[ ! ] When specifying other than HBLTD8, check for the applicable screws and nuts respectively.		—
NBLTD8
HBLTD8
HBLTDB8
CHBLTD8
HBLTDW8
HBLUD8
NBLUDW8
HBLUDW8
[ ! ] Screws for black anodized brackets are made of HCBMTB (Trivalent Chromate Black).
[ ! ] The part numbers are those of the products before cleaning.

Alteration Details

■Mounting Hole Alteration for Cover (-C)

M5 tapped holes can be added on both sides.
Alteration Part Number Example: HBLUDW8-C

 

■Set of applicable Screws and Nuts Details

Alteration part numberBoltBoltNut
Part NumberMaterialQty.Part NumberMaterialQty.TypePart NumberMaterialStopperQty.
SSTSCB8-15Stainless Steel4SCB8-25Stainless Steel4Pre-AssemblyHNTTSN8-8Stainless SteelNone8
SSUSCB8-15Stainless Steel4SCB8-25Stainless Steel4Pre-AssemblySHNTU8-8Stainless SteelProvided8
SSPSCB8-15Stainless Steel4SCB8-25Stainless Steel4Post-AssemblySHNTP8-8Stainless SteelProvided8

App. Example

Brackets to connect extrusions with 2 slots using one bracket.
It has four mounting holes on one side, allowing more secure connection.

 

Fix NEFS8-80160 in 160 directions

(1) HFS8-80160-Length

(2) HFS8-8080-Length

(3) NBLUDW8

(4) CBM8-25
(6) HNTT8-8

(5) CBM8-15

SymbolProduct NamePart NumberQty.
(1)80 × 160 Aluminum ExtrusionNEFS8-80160-Length1
(2)80 × 80 Aluminum ExtrusionNEFS8-8080-Length1
(3)Ultra Thick BracketsNBLUDW82
(4)Hex Socket Head Cap ScrewCBM8-258
(5)Hex Socket Head Cap ScrewCBM8-158
(6)NutHNTT8-816
 

■Difference between Extruded Brackets and Tabbed Brackets

[This Product]Extruded Brackets

·The extruded brackets are made of A6N01SS-T5, manufactured by aluminum extrusion. Surfaces are anodized.
·Suitable when appearance well balanced with the extrusions is desired. Designed to prevent dust from building up.
·Suitable for the areas where the strength is required because it is stronger than the tabbed brackets.
Tabbed Brackets

·The tabbed brackets are molded brackets made of material ADC12. Since it is not basically anodized, it is less expensive than extruded brackets of the same size.
·Since the tabs stop rotating the brackets when tightening, work efficiency is improved.
·Various types of brackets with additional functions are available.

Technical Information

■ Perpendicularity

Perpendicularity of Extruded Brackets is manufactured within ±1° tolerance based on JIS Standard H4100 Special Grade.
For applications where perpendicularly is important, use Perpendicularly Machined Type.
(For 8 Series: Perpendicularity 0.03 and 0.06 are available.)

 

■How to Specify Allowable Load of Bracket

 
This represents the allowable load per bracket for the extrusion assembly structured by bridging a beam extrusion between two vertical extrusions and then, attaching a bracket just below the bottom face of each end of the beam extrusion.
Allowable Load here means the load under which the bracket can stays at its position (without fracturing or sliding), after all of its mounting holes are fixed with screws.
 

■Mechanical Properties of Aluminum Extrusions (JIS Standard Reference)

Material (JIS Symbol)A6063S-T5A6N01SS-T5
Tensile Strength (N/mm2)155 or more245 or more
Yield Stress (N/mm2)110 or more205 or more
Young's Modulus (N/mm2)6997269972
Brinell Hardness (HB)8888
Surface TreatmentAnodize 9 µm or moreAnodize 9 µm or more

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment


Hydrocarbon cleaning Ro water cleaning
Neutral Detergent Cleaning
High-pressure jet washing (Ro water) followed by pure water cleaning
Oil-free Compressor Used
Anti-rust single packing
· Precision cleaning (Part Number: SH-□□)
 

Working Environment: Class 1,000

 

Working Environment: Class 10


Hydrocarbon cleaning Ro water cleaning
Neutral Detergent Cleaning
High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning
Use pure water (13 MΩ·cm)
Use nitrogen blow
Conducted on a clean bench in a Class 10 clean environment
· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
 

Working Environment: Class 1,000

 

Working Environment: Class 10


Hydrocarbon cleaning
Ro water cleaning
Neutral Detergent Cleaning
Electrolytic polishing with an electrolytic polishing layer according to the material
High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning
Use warm pure water (13 MΩ·cm)
Use nitrogen blow
Conducted on a clean bench in a Class 10 clean environment
Packaging Example
For degreasing:
(Part Number: SL-□□)

Depending on some products and dimensions,
packaging type may vary.		For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.
 
Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method

Product Part Number

Packaging Type

Effects Compared to Uncleaned Product

Environment (Standard)

Use Case and Process

DegreasingSL-□□Anti-rust packingOil removalGeneral environmentRegular assembly process
Post battery assembly process
Precision cleaningSH-□□Degassing double packingOil removal
Dust removal		Clean environment (Class 10 to 1,000)Battery assembly process
LCD-related post assembly process
In-vehicle camera assembly process
Electrolytic polishing + precision cleaningSHD-□□Degassing double packingOil removal
Dust removal
Outgas reduction		Vacuum environment
Clean environment (Class 10 to 1,000)		Pre-semiconductor process
Liquid crystal deposition process
Pre-OLED process

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
45
60
  1. 1
Part Number
SH-HBLUDW8
SH-HBLUDW8-C
SH-HBLUDW8-C-SSP
SH-HBLUDW8-C-SST
SH-HBLUDW8-C-SSU
SH-HBLUDW8-SSP
SH-HBLUDW8-SST
SH-HBLUDW8-SSU
SH-NBLUDW8
SH-NBLUDW8-C
SH-NBLUDW8-C-SSP
SH-NBLUDW8-C-SST
SH-NBLUDW8-C-SSU
SH-NBLUDW8-SSP
SH-NBLUDW8-SST
SH-NBLUDW8-SSU
SL-HBLUDW8
SL-HBLUDW8-C
SL-HBLUDW8-C-SSP
SL-HBLUDW8-C-SST
SL-HBLUDW8-C-SSU
SL-HBLUDW8-SSP
SL-HBLUDW8-SST
SL-HBLUDW8-SSU
SL-NBLUDW8
SL-NBLUDW8-C
SL-NBLUDW8-C-SSP
SL-NBLUDW8-C-SST
SL-NBLUDW8-C-SSU
SL-NBLUDW8-SSP
SL-NBLUDW8-SST
SL-NBLUDW8-SSU
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngPerpendicularity Cleaning Method Material Mounting Hole Alteration for Covers Accessory

275,884 VND

1 Piece(s) Available 6 Day(s) or more With standardPrecision CleaningA6N01SS-T5N/AN/A

352,583 VND

1 Piece(s) Available 6 Day(s) or more With standardPrecision CleaningA6N01SS-T5C (Cover mounting tapping)N/A

498,146 VND

1 Piece(s) Available 6 Day(s) or more With standardPrecision CleaningA6N01SS-T5C (Cover mounting tapping)SSP (Stainless steel bolt / post-assembly insertion spring nut set)

460,236 VND

1 Piece(s) Available 6 Day(s) or more With standardPrecision CleaningA6N01SS-T5C (Cover mounting tapping)SST (Stainless steel bolt / nut set)

519,560 VND

1 Piece(s) Available 6 Day(s) or more With standardPrecision CleaningA6N01SS-T5C (Cover mounting tapping)SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

491,200 VND

1 Piece(s) Available 6 Day(s) or more With standardPrecision CleaningA6N01SS-T5N/ASSP (Stainless steel bolt / post-assembly insertion spring nut set)

453,580 VND

1 Piece(s) Available 6 Day(s) or more With standardPrecision CleaningA6N01SS-T5N/ASST (Stainless steel bolt / nut set)

512,905 VND

1 Piece(s) Available 6 Day(s) or more With standardPrecision CleaningA6N01SS-T5N/ASSU (Stainless steel bolt / pre-assembly insertion spring nut set)

277,200 VND

1 Piece(s) Available 6 Day(s) or more No StandardPrecision CleaningA6063S-T5N/AN/A

264,309 VND

1 Piece(s) Available 6 Day(s) or more No StandardPrecision CleaningA6063S-T5C (Cover mounting tapping)N/A

401,972 VND

1 Piece(s) Available 6 Day(s) or more No StandardPrecision CleaningA6063S-T5C (Cover mounting tapping)SSP (Stainless steel bolt / post-assembly insertion spring nut set)

366,559 VND

1 Piece(s) Available 6 Day(s) or more No StandardPrecision CleaningA6063S-T5C (Cover mounting tapping)SST (Stainless steel bolt / nut set)

437,942 VND

1 Piece(s) Available 6 Day(s) or more No StandardPrecision CleaningA6063S-T5C (Cover mounting tapping)SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

421,168 VND

1 Piece(s) Available 6 Day(s) or more No StandardPrecision CleaningA6063S-T5N/ASSP (Stainless steel bolt / post-assembly insertion spring nut set)

383,548 VND

1 Piece(s) Available 6 Day(s) or more No StandardPrecision CleaningA6063S-T5N/ASST (Stainless steel bolt / nut set)

442,872 VND

1 Piece(s) Available 6 Day(s) or more No StandardPrecision CleaningA6063S-T5N/ASSU (Stainless steel bolt / pre-assembly insertion spring nut set)

260,854 VND

1 Piece(s) Available 6 Day(s) or more With standardDegreasingA6N01SS-T5N/AN/A

349,110 VND

1 Piece(s) Available 6 Day(s) or more With standardDegreasingA6N01SS-T5C (Cover mounting tapping)N/A

494,673 VND

1 Piece(s) Available 6 Day(s) or more With standardDegreasingA6N01SS-T5C (Cover mounting tapping)SSP (Stainless steel bolt / post-assembly insertion spring nut set)

457,052 VND

1 Piece(s) Available 6 Day(s) or more With standardDegreasingA6N01SS-T5C (Cover mounting tapping)SST (Stainless steel bolt / nut set)

516,377 VND

1 Piece(s) Available 6 Day(s) or more With standardDegreasingA6N01SS-T5C (Cover mounting tapping)SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

488,017 VND

1 Piece(s) Available 6 Day(s) or more With standardDegreasingA6N01SS-T5N/ASSP (Stainless steel bolt / post-assembly insertion spring nut set)

450,396 VND

1 Piece(s) Available 6 Day(s) or more With standardDegreasingA6N01SS-T5N/ASST (Stainless steel bolt / nut set)

509,432 VND

1 Piece(s) Available 6 Day(s) or more With standardDegreasingA6N01SS-T5N/ASSU (Stainless steel bolt / pre-assembly insertion spring nut set)

273,727 VND

1 Piece(s) Available 6 Day(s) or more No StandardDegreasingA6063S-T5N/AN/A

235,370 VND

1 Piece(s) Available 6 Day(s) or more No StandardDegreasingA6063S-T5C (Cover mounting tapping)N/A

398,789 VND

1 Piece(s) Available 6 Day(s) or more No StandardDegreasingA6063S-T5C (Cover mounting tapping)SSP (Stainless steel bolt / post-assembly insertion spring nut set)

339,464 VND

1 Piece(s) Available 6 Day(s) or more No StandardDegreasingA6063S-T5C (Cover mounting tapping)SST (Stainless steel bolt / nut set)

409,003 VND

1 Piece(s) Available 6 Day(s) or more No StandardDegreasingA6063S-T5C (Cover mounting tapping)SSU (Stainless steel bolt / pre-assembly insertion spring nut set)

417,985 VND

1 Piece(s) Available 6 Day(s) or more No StandardDegreasingA6063S-T5N/ASSP (Stainless steel bolt / post-assembly insertion spring nut set)

380,364 VND

1 Piece(s) Available 6 Day(s) or more No StandardDegreasingA6063S-T5N/ASST (Stainless steel bolt / nut set)

439,400 VND

1 Piece(s) Available 6 Day(s) or more No StandardDegreasingA6063S-T5N/ASSU (Stainless steel bolt / pre-assembly insertion spring nut set)
Part Number
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngPerpendicularity Cleaning Method Material Mounting Hole Alteration for Covers Accessory

Loading...Tải…

  1. 1

Basic InformationThông tin cơ bản

Bracket Type Extruded Brackets Environmentally Friendly RoHS compliant (10 substances) Properties / applications Clean washing
Tab Position Not Tabbed Compatible Extrusion Width(mm) 80 Compatible No. of Slots 2 Slots
Series MISUMI Brackets for 8 Series (Extrusion Slot Width 10mm) Additional Functions (Extruded Bracket) Standard Surface Treatment Anodizing
Extrusion No. 8 Extrusion Size For 80 Bracket Type Ultra Thick Brackets
Applicable Screws M8 bolt Number of Extrusion Connection Holes 4

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.

Close

Comparison list