(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(12 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

ES-SSE2BD13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]

Rail Length L Rail Width W1 Assembly Height H Nominal Part Number Preload Accuracy Standards No. of Blocks L Dimension Type type Rail Type CAD Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Rail Length L(mm)
45

70

95

100

110

120

145

150

160

170

190

195

220

230

245

270

280

295

310

320

340

345

350

370

390

395

400

420

430

445

460

470

495

510

520

545

550

570

580

590

595

620

630

640

645

670

695

700

710

720

745

750

760

770

790

795

820

830

845

870

880

895

910

920

940

945

950

970

990

1000
[46-989/1mm Unit(s)]
ClearTrống
Rail Width W1(mm)
12

15

20

24

42
ClearTrống
Assembly Height H(mm)
13

14

16

20
ClearTrống
Nominal Part Number
12W

15W

20W
ClearTrống
Preload
- Light Preload
  - Light Preload
ClearTrống
Accuracy Standards
- High Grade
ClearTrống
No. of Blocks
- 1
- 2
ClearTrống
L Dimension Type
- Configurable Type
- Selectable Type
ClearTrống
type
- ES-SSE2BD
- ES-SSE2BDL
- ES-SSE2BWD
- ES-SSE2BWDL
- ES-SSEBD
- ES-SSEBDL
- ES-SSEBWD
- ES-SSEBWDL
ClearTrống
Rail Type
- Standard Rail
- Wide Rail
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

4 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

ES Miniature Linear Guides - Dust Resistant - Standard Blocks (Light Preload) [RoHS Compliant]

Name: ES Miniature Linear Guides - Dust Resistant - Standard Blocks (Light Preload) [RoHS Compliant]
Brand: MISUMI
Availability: PreOrder

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Brand :

MISUMI

Part Number :

ES-SSE2BD13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]

ES-SSE2BD16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]

ES-SSE2BD20-[160,220,280,340,400,460,520,580,640,700,760,820,880,940,1000]

ES-SSE2BDL13-[121-969/1]

ES-SSE2BDL16-[151-989/1]

ES-SSE2BDL20-[161-939/1]

ES-SSEBD13-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]

ES-SSEBD16-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]

ES-SSEBD20-[100,160,220,280,340,400,460,520,580,640,700,760,820,880,940,1000]

ES-SSEBDL13-[46-969/1]

ES-SSEBDL16-[71-989/1]

ES-SSEBDL20-[101-939/1]

ES-SSE2BD13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

This Model is fully manufactured by MISUMI Group Factory in Vietnam.

Product Description

RoHS Compliant Miniature Linear Guides - Dust Resistant - Standard Blocks, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Min./Max. (mm.): 45 and 990
● Assembly Height (mm.):13, 14, 16 and 20
● Rail Type : Short Rail or Wide Rail
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

Product Type（Part No.））

Dimensional Drawing/span>

Specification

Basic Rated Load / Others

Alterations

Accessories

Product Type（Part No.）

Material （Hardness） 1	Rail Length Type 2	Number of Blocks 3	Preload / Precision GradeA		Assemble Height(H)B
			Light Preload
			Hght
			Standard Rail	Wide Rail	Standard Rail	Wide Rail
Stainless Steel ［SUS440C equivalent］（56HRC～）	Standard Length （Fixed）	1	ES-SSEBD	ES-SSEBWD	13 16 20	14 16
	Standard Length （Fixed）	2	ES-SSE2BD	ES-SSE2BWD
	1mm Increment （Specified）	1	ES-SSEBDL	ES-SSEBWDL
	1mm Increment （Specified）	2	ES-SSE2BDL	ES-SSE2BWDL

1Materials of each part can be checked here>> Misumi linear guide product information

2Standard Length of selectable length type (Fixed Length) can be checked "Standard Length (Fixed Length) List or here to refer
If the require rail length is not available in the selectable length type, please select the 1mm specification (specified size).

33 blocks and 4 blocks option is available. Please compete part no. of single block type, then andd [-B3] or [-B4] as alteration.

If you request more than5 blocks, please see details here.>>Click

4For detail on varios types of grease, see details here>>Click *MX（Lubrication Unit）Type: standard Lithium grease filled and no other choice.

[ ! ]Operating Temperature for this prodcut is −20〜80℃

[ ! ]About Low Temperature Black Chrome Plating, see more details here>>click

![NG] Blocks or Rails are can't be purchased individually (sold as SET items)

Part No. example

Type	Height H		Rail Length L		Alterations
A	B
ES-SSEBD	13	-	270			（ES-SSEBD13-270）
ES-SSE2BD	13	-	270	-	LLC	（ES-SSE2BD13-270-LLC）
ES-SSEBDL	13	-	961	-	B3	（ES-SSEBDL13-961-B3）

Dimensional Drawing

Standard RailH13・16・20
Wide Rail H14 Wide Rail H16 ミニチュアリニアガイド　　防塵用　標準ブロック／軽予圧:関連画像

[！] Dimension "G" of L specified Type is not same as the value on the table below. Please refere to the chart.

■Structure

・Intrusion of foreign substances into the blocks can be prevented by
enhanced sealing effects with 2-ply side seal and under seals
・Can be used where dust and machining chips exist.
・Do not use in areas with high temperature dusts such as weld spatter

■L Toleracen Unit：(mm)

L Category	Tolerance
25 ≦L≦ 400	0 -0.8
25 ≦L≦ 400	0 -0.8
400 <L≦ 1000	0 -1.0
400 <L≦ 1000	0 -1.0

■H・W₂Dimensional Accuracy

Product Category	Specifications	Assemble Height （H）	Precision（μm）
Product Category	Specifications	Assemble Height （H）	High
Miniature Linear Guide	Height H Tolerance	6～20	±20
	Pair Variation of Height H		15
	Width W₂Tolerance		±25
	Pair Variation of Width W₂		20

■Other Dimensional Tolerance

Range		Tolerance （mm）
Over	Or less	Tolerance （mm）
0.5	3	±0.1
3	6	±0.1
6	30	±0.2
30	120	±0.3
120	400	±0.5
400	1000	±0.8
1000	2000	±1.2

JIS B 0405-1991 Grade m(medium) Compliant

Specification

Rail Type	Part No.			L 4	Block Dimension								Rail Dimension
	Type		H		W	L₁	B	C	S×ℓ	L₂	K	Cb	H₁	W₁	W₂	Ca	Counterbored	F	G 5
	Single Block	2 Blocks	H		W	L₁	B	C	S×ℓ	L₂	K	Cb	H₁	W₁	W₂	Ca	d₁×d₂×h	F	G 5
Standard Rail	ES-SSEBD SSEBDL	ES-SSE2BD SSE2BDL	13	45～470 （120）	27	36.9	20	15	M3×3.5	19.9	11	0.5	7.5	12	7.5	0.5	3.5×6×4.5	25	10
			16	70～990 （150）	32	45.4	25	20	M3×4	27.4	13	0.5	9.5	15	8.5	0.5	3.5×6×4.5	40	15
			20	100～1000 （160）	40	53	30	25	M4×6	34.6	16	0.5	11	20	10	0.5	6×9.5×5.5	60	20
Wide Rail	ES-SSEBWD ES-SSEBWDL	ES-SSE2BWD ES-SSE2BWDL	14	70～470 （150）	40	47.3	28	15	M3×3.5	30.1	12	0.5	8	24	8	0.5	4.5×8×4.5	40	15
			16	70～990 （190）	60	58	45	20	M4×4.5	40	14	0.5	9.5	42	9	0.5	4.5×8×4.5	40	15

5( )Dimension is the shortest Length for 2 blocks type

51mm increment（Specified Length）of H20 has maximum 939mm.

6Length Specified type are cut evenly on both side(left and right). In this case, G dimesnion will be different from the value in chart above. Calculation method: see below.>>click

[ ! ]Correctly align the datum planes (the sides with the straight grooves) of both the rail and block when installation. For details, see "Installation and handling" below.

[NG] Block and Rail can't be purchased individually(sold as set items)

Standard Length (Fixed Length) List

The table below shows the list of selctable length.
Length which you can not find here is also available as "configurable length type" specified with 1mm increments.

Height ( H )		Rail Length ( L )
Standard Rail	13	(45)	(70)	(95)	120	145	170	195	220	245	270	295	320	345	370	395	420	445	470
	16	(70)	(110)	150	190	230	270	310	350	390	430	470	510	550	590	630	670	710	750	790	830	870	910	950	990
	20	(100)	160	220	280	340	400	460	520	580	640	700	760	820	880	940	1000
Wide Rail	14	(70)	(110)	150	190	230	270	310	350	390	430	470
Wide Rail	16	(70)	(110)	(150)	190	230	270	310	350	390	430	470	510	550	590	630	670	710	750	790	830	870	910	950	990

!( ) this length is availalbe with single blocks type only.

Basic Rated Load / Allowalbe Static Moment / Mass

kgf=N×0.101972

Height (H)		Basic Rated Load7		Static Allowable Moment						Mass
		C（Dynamic） kN	Co（Static） kN	Single Block			2 Blocks used in close contact8			Block kg	Guide Rail kg/m
		C（Dynamic） kN	Co（Static） kN	M_A N・m	M_B N・m	M_C N・m	M_A N・m	M_B N・m	M_C N・m	Block kg	Guide Rail kg/m
Standard Rail	13	1.98	3.3	8.8	9.5	16.1	51.3	51.3	32.2	0.045	0.61
	16	3.24	5.4	21.6	23.4	39.6	118.2	118.2	79.2	0.065	1.02
	20	4.68	8.5	48.4	48.4	86.4	143.3	143.3	172.8	0.13	1.65
Wide Rail	14	3.15	5.3	20.6	22.3	52.1	70.9	70.9	104.2	0.085	1.40
Wide Rail	16	5.22	8.5	40.2	43.6	148.0	160.9	160.9	296.0	0.16	2.95

7The basic rated load is the same for the four directions that act on the block (radial direction, reverse radial direction, and lateral direction). It can be used in any position.

8The static allowable moment when two blocks are in close contact is a reference value, not a guaranteed value.

The allowable load and moment of the linear guide are determined by dividing each value (table above) by the static safety factor fs (table below).For details>>Click
ex）Under nomal operating condition: Allowalble load for H16 Type(kN) ⇒ 5.4/2＝2.7 （276kg）

Static Safety Factor(fs lower limit)

Condition	fs lower limit
For normal operating condition	1～2
When smooth running performance is required	2～4
When variatoin and impact exist	3～5

Allowable load (N)≦ Co/fs
Allowable Moment (N・m)≦ (M_A、M_B、M_C)/fs

fs:Static Safety Factor　Co: Basic Static Rated Load
M_A,M_B,M_C: Allowable Static Moment(N・m)

Installation and Handling

■Datum Side and Mounting Direction

Datum side has Datum Plane Mark(Groove), see Figure Ａ. Blocks and Rails must have the same datum side when use.
Various Mounting Direction is availalbe having the same Basic Rated Load, see Figure B

(A)

(B)

■Precaution of use

Although the retaining wire prevents the balls from falling off, care must be taken when attaching and detaching the block. Click here for details>>click
If the block and rail are not used in original combination, radial clearance and accuracy cannot be guaranteed.
It is not possible to extend the length by adding rails on the same axis.This is because the assembly accuracy between the two cut surfaces is not guaranteed.
Dimensional Accurarcy of Linear Guides is guranteed after fixation of the rail ( Screw Mounting and pushed to the datum side）.
The rail bends before are forced by fixation. so there is no probelm in using it.

■About Grease

When shipping ES Linear Guides, Lithium Soap Grease（Kyodo Yushi Multemp PS2） is filled.
Other Brand's Grease is not reccomended to be filled. Please adopt the same brand&s grease for maintenance.
Grease can be pasted to the rail directly. Please run the blocks back and forth to blend in after pasting.

■Others

Lifetime calculation>>Click

Alterations

Code

Alterations

Specification

Precaution

LLC
RLC

LLC：Left End Cut
RLC：Right End Cut

・Cut Rail End
・Rail is cut with the prodcut ID facing side( datum on other side)
・Please see cut length of each size below.

Rail Type	H	Cut L	N
Standard Rail	13	5	5
	16	10
	20	15
Wide Rail	14	5	10
Wide Rail	16	5	10

!Overall length wll be Shorter by cutting.
ex）ES-SSEBD13-95-LLC: has L 90mm.
!Applicable to Standard Length type only
!This option can't be applied with L45mm of H13
!Not applicable to H20

B3
B4

B3：add blocks（total 3pcs）
B4：add blocks（total 4pcs）

3 Blocks Specification

4 Blocks Specification

・・Shipped as 3 blocks (4 blocks) to single block type.
・Thehere are limits of rail length L
See "selectable shortest rail length" for details.

!Single block part no need to be selected for this opiton and the case below is NG example( 2blocks type is selected)
（NG case : ES-SSE2BD13-320-B4）

Accessories

Height ( H )		Linear Guide Clamper	Miniature Linear Guide Height Adjusting Block
		Linear Guide Clamper	S45C Equivalent Electroless Nickel Plating		Aluminum Alloy Clear Anodized
		Standard Rail Wide Rail	Datum side	Free side	Datum side	Free side
			―
Standard Rail	13	SECK13	Adjustment Block is not applicable to Dust Resistant Type
	16	SECK16
	20	―
Wide Rail	14	SECWK14
Wide Rail	16	SECWK16

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
ES-SSE2BD13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
ES-SSE2BD16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]
ES-SSE2BD20-[160,220,280,340,400,460,520,580,640,700,760,820,880,940,1000]
ES-SSE2BDL13-[121-969/1]
ES-SSE2BDL16-[151-989/1]
ES-SSE2BDL20-[161-939/1]
ES-SSEBD13-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470,495,520,545,570,595,620,645,670,695,720,745,770,795,820,845,870,895,920,945,970]
ES-SSEBD16-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670,710,750,790,830,870,910,950,990]
ES-SSEBD20-[100,160,220,280,340,400,460,520,580,640,700,760,820,880,940,1000]
ES-SSEBDL13-[46-969/1]
ES-SSEBDL16-[71-989/1]
ES-SSEBDL20-[101-939/1]

Price	Minimum Order Qty.	Days to ShipSố ngày giao hàng	Rail Length L (mm)	Rail Width W1 (mm)	Assembly Height H (mm)	Nominal Part Number	Rail Type	Preload	Accuracy Standards	No. of Blocks	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (N⋅m)	Allowable Static Moment MB (N⋅m)	Allowable Static Moment MC (N⋅m)	L Dimension Type
-	1 Piece(s)	4 Day(s)	120 ～ 970	12	13	12W	Standard Rail	[Light Preload] Light Preload	High Grade	2	1980	3300	8.8	9.5	16.1	Selectable Type
-	1 Piece(s)	4 Day(s)	150 ～ 990	15	16	15W	Standard Rail	[Light Preload] Light Preload	High Grade	2	3240	5400	21.6	23.4	39.6	Selectable Type
-	1 Piece(s)	4 Day(s)	160 ～ 1000	20	20	20W	Standard Rail	[Light Preload] Light Preload	High Grade	2	4680	8500	48.4	48.4	86.4	Selectable Type
-	1 Piece(s)	4 Day(s)	121 ～ 969	12	13	12W	Standard Rail	[Light Preload] Light Preload	High Grade	2	1980	3300	8.8	9.5	16.1	Configurable Type
-	1 Piece(s)	4 Day(s)	151 ～ 989	15	16	15W	Standard Rail	[Light Preload] Light Preload	High Grade	2	3240	5400	21.6	23.4	39.6	Configurable Type
-	1 Piece(s)	4 Day(s)	161 ～ 939	20	20	20W	Standard Rail	[Light Preload] Light Preload	High Grade	2	4680	8500	48.4	48.4	86.4	Configurable Type
-	1 Piece(s)	4 Day(s)	45 ～ 970	12	13	12W	Standard Rail	[Light Preload] Light Preload	High Grade	1	1980	3300	8.8	9.5	16.1	Selectable Type
-	1 Piece(s)	4 Day(s)	70 ～ 990	15	16	15W	Standard Rail	[Light Preload] Light Preload	High Grade	1	3240	5400	21.6	23.4	39.6	Selectable Type
-	1 Piece(s)	4 Day(s)	100 ～ 1000	20	20	20W	Standard Rail	[Light Preload] Light Preload	High Grade	1	4680	8500	48.4	48.4	86.4	Selectable Type
-	1 Piece(s)	4 Day(s)	46 ～ 969	12	13	12W	Standard Rail	[Light Preload] Light Preload	High Grade	1	1980	3300	8.8	9.5	16.1	Configurable Type
-	1 Piece(s)	4 Day(s)	71 ～ 989	15	16	15W	Standard Rail	[Light Preload] Light Preload	High Grade	1	3240	5400	21.6	23.4	39.6	Configurable Type
-	1 Piece(s)	4 Day(s)	101 ～ 939	20	20	20W	Standard Rail	[Light Preload] Light Preload	High Grade	1	4680	8500	48.4	48.4	86.4	Configurable Type

Loading...Tải…

G Dimension

[G] Dimension of Length Specifified Type requires calculation.
Please refer to the below table and formula.
*[G] Dimension of Fixed Length: Please refer to the specification table. (no calculation required)

■ ES Miniature Linear Guide -Normal Rail Dimension-

Assemble Height H	6・8	10	13	16	20	# of Mounting Holes M
Rail Legth L	25～35	35～47	45～57	70～87	100～139	2
	36～50	48～67	58～82	88～127	140～199	3
	51～65	68～87	83～107	128～167	200～259	4
	66～80	88～107	108～132	168～207	240～319	5
	81～95	108～127	133～157	208～247	320～379	6
	96～110	128～147	158～182	248～287	380～439	7
	111～125	148～167	183～207	288～327	440～499	8
	126～140	168～187	208～232	328～367	500～559	9
	141～155	188～207	233～257	368～407	560～619	10
	156～170	208～227	258～282	408～447	620～679	11
	171～185	228～247	283～307	448～487	680～739	12
	186～200	248～267	308～332	488～527	740～799	13
	201～215	268～287	333～357	528～567	800～859	14
	216～230	288～307	358～382	568～607	860～919	15
	231～245	308～327	383～407	608～647	920～979	16
	246～260	328～347	408～432	648～687	980～1000	17
	261～275	348～367	433～457	688～727	－	18
	276～290	368～387	458～482	728～767	－	19
	291～305	388～407	483～507	768～807	－	20
	306～310	408～427	508～532	808～847	－	21
	－	428～447	533～557	848～887	－	22
	－	448～467	558～582	888～927	－	23
	－	468～487	583～607	928～967	－	24
	－	488～507	608～632	968～990	－	25
	－	508～527	633～657	－	－	26
	－	528～547	658～682	－	－	27
	－	548～567	683～707	－	－	28
	－	568～587	708～732	－	－	29
	－	588～607	733～757	－	－	30
	－	608～627	758～782	－	－	31
	－	628～635	783～807	－	－	32
	－	－	808～832	－	－	33
	－	－	833～857	－	－	34
	－	－	858～882	－	－	35
	－	－	883～907	－	－	36
	－	－	908～932	－	－	37
	－	－	933～957	－	－	38
	－	－	958～970	－	－	39
F Pitch of Mounting Hole	15	20	25	40	60

■ ES Miniature Linear Guide -Widel Rail Dimension-

Assemble Height H	6.5	9	12	14	16	# of Mounting Holes M
Rail Legth L	－	50～67	50～67	70～89	70～89	2
	50～67	68～97	68～97	90～129	90～129	3
	68～87	98～127	98～127	130～169	130～169	4
	88～107	128～157	128～157	170～209	170～209	5
	108～127	158～187	158～187	210～249	210～249	6
	128～147	188～217	188～217	250～289	250～189	7
	148～167	218～247	218～247	290～329	290～329	8
	168～170	248～277	248～277	330～369	330～369	9
	－	278～307	278～307	370～409	370～409	10
	－	308～337	308～337	410～449	410～449	11
	－	338～367	338～367	450～489	450～489	12
	－	368～380	368～397	490～529	490～529	13
	－	－	398～427	530～569	530～569	14
	－	－	428～457	570～609	570～609	15
	－	－	458～487	610～649	610～649	16
	－	－	488～517	650～689	650～689	17
	－	－	518～547	690～729	690～729	18
	－	－	548～577	730～769	730～769	19
	－	－	578～607	770～809	770～809	20
	－	－	608～620	810～849	810～849	21
	－	－	－	850～889	850～889	22
	－	－	－	890～929	890～929	23
	－	－	－	930～969	930～969	24
	－	－	－	970～990	970～990	25
F Pitch of Mounting Hole	20	30	30	40	40

Basic InformationThông tin cơ bản

Block Type	Standard Block	Set / Single Item	Set	Material	Stainless Steel
Ball Arrangement	Miniature Type	Retainer	N/A	Lubrication Type	Lubrication Applied
Rolling Element	Ball	Surface Treatment	none	Lubrication Type	Filled with Lithium soap based grease
Block Material	Stainless Steel	Material-Ball	Stainless Steel	Material-Return Cap	POM
Material-Retaining Wire	Stainless Steel	Material-Side Seal	Stainless Steel+Nitril Rubber(NBR)

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Rail Length L(mm)

Rail Width W1(mm)

Assembly Height H(mm)

Nominal Part Number

Preload

Accuracy Standards

No. of Blocks

L Dimension Type

type

Rail Type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

ES Miniature Linear Guides - Dust Resistant - Standard Blocks (Light Preload) [RoHS Compliant]

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Product Type（Part No.）

Dimensional Drawing

Specification

Basic Rated Load / Allowalbe Static Moment / Mass

Alterations

Accessories

Part Number

G Dimension

Basic InformationThông tin cơ bản

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng