(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(1 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

ES-SVW24H
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Rail Length L(mm)

    • 100
    • 160
    • 161
    • 220
    • 280
    • 340
    • 400
    • 460
    • 520
    • 580
    • 640
    • 700
    • 760
    • 820
    • 880
    • 940
    • 1000
    • 1120
    • 1240
    • 1360
    • 1480
    • 1600
    • 1720
    • 1840
    • 1960
    • 9400

     

    ClearTrống

  • type

    • ES-RV2R
    • ES-RV2RL
    • ES-RV2W
    • ES-RV2WL
    • ES-RV2WT
    • ES-RV2WTL
    • ES-RVR
    • ES-RVRL
    • ES-RVW
    • ES-RVWL
    • ES-RVWT
    • ES-RVWTL
    • ES-SV2R
    • ES-SV2R-MX
    • ES-SV2RJ
    • ES-SV2RJ-MX
    • ES-SV2RL
    • ES-SV2RL-MX
    • ES-SV2RLJ
    • ES-SV2RLJ-MX
    • ES-SV2W
    • ES-SV2W-MX
    • ES-SV2WL
    • ES-SV2WL-MX
    • ES-SV2WT
    • ES-SV2WT-MX
    • ES-SV2WTL
    • ES-SV2WTL-MX
    • ES-SVR
    • ES-SVR-MX
    • ES-SVRJ
    • ES-SVRJ-MX
    • ES-SVRL
    • ES-SVRL-MX
    • ES-SVRLJ
    • ES-SVRLJ-MX
    • ES-SVW
    • ES-SVW-MX
    • ES-SVWL
    • ES-SVWL-MX
    • ES-SVWT
    • ES-SVWT-MX
    • ES-SVWTL
    • ES-SVWTL-MX

    ClearTrống

  • Block Type

    • Standard
      • Standard Block
    • Wide
      • Wide Block Cross-Through Holes
      • Wide Block Tapped Hole

    ClearTrống

  • Rail Width W1(mm)

    • 15
    • 20
    • 23

    ClearTrống

  • Assembly Height H(mm)

    • 24
    • 28
    • 33

    ClearTrống

  • Nominal Part Number

    • 15
    • 20
    • 25

    ClearTrống

  • Accuracy Standards

    • Standard Grade
    • High Grade

    ClearTrống

  • No. of Blocks

    • 1
    • 2

    ClearTrống

  • Surface Treatment

    • Low Temperature Black Chrome Plating
    • none

    ClearTrống

  • Lubrication Type

    • Filled with Lithium soap based grease
    • Grease for food sector (H Type)
    • Heat Resistant Grease (L Type)
    • Low Dust Generation Grease (G Type)
    • Low Dust Generation Grease (Y Type)
    • Lubrication Unit

    ClearTrống

  • L Dimension Type

    • Configurable Type
    • Selectable Type

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • 4 Day(s) or Less
    • 6 Day(s) or Less
    • 8 Day(s) or Less
    • 11 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

ES Linear Guides for Medium Load (Normal Clearance) [RoHS Compliant] (ES-SVW24H)

ES Linear Guides for Medium Load (Normal Clearance) [RoHS Compliant] (ES-SVW24H)

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

  • ES Linear Guides for Medium Load (Normal Clearance) [RoHS Compliant] (ES-SVW24H)
  • ES Linear Guides for Medium Load (Normal Clearance) [RoHS Compliant]
  • ES Linear Guides for Medium Load (Normal Clearance) [RoHS Compliant]
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MISUMI

Part Number :
ES-SVW24H
ES-SVW24H

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
  • Order Qty :
  • Price :
    ---
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • This Model is fully manufactured by MISUMI Group Factory in Vietnam.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

ES Linear Guides for Medium Load

Medium LoadLinear GuidePrecision

[Specification]

- Configurable Rail Length by 1mm increments

- Anti-Rust Surface Treatment: "Low Temperature Black Chrome Plating" is Available

- Material: Carbon Steel

- Rail Length Min./Max. (mm.): 100 and 1960 / Assembly Height (mm.): 24, 28, 33

- Accuracy Standards: Normal / High

[Features]

- Manufactured by Saigon Precision Factory in Vietnam ( MISUMI Group ) with full Inspection

- RoHS Compliant

- Cost-Effective Solution with High Performance

ES Linear Guide
Save Up to
VS MISUMI Standard

MISUMI Standard
MISUMI Original

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support

Prodcut Type（Part No.）

Material
（Hardness）
1		Block TypeRail Length
Type
2		TypeA
3		MX
Lubrication Unit B		Asemble Height(H)
C		GreaseD
4
Single Block2 Blocks
HighNormalHighNormal
No Surface Treatment

Carbon Steel
［SCM alloy Steel］
（58HRC～）		Standard BlockStandard LengthES-SVRJES-SVRES-SV2RJES-SV2RBlank ： none
-MX ： Provided		24
28
33		Blank ： Standard
G ： G Grease
L ： L Grease
Y ： Y Grease
H ： H Grease
1mm Increment
（Specified）		ES-SVRLJES-SVRLES-SV2RLJES-SV2RL
Wide Block
Through Hole		Standard Length-ES-SVW-ES-SV2W
1mm Increment
（Specified）		-ES-SVWL-ES-SV2WL
Wide Block
Tapped Hole		Standard Length-ES-SVWT-ES-SV2WT
1mm Increment
（Specified）		-ES-SVWTL-ES-SV2WTL
Low Temperature Black Chrome Plating

Carbon Steel
［SCM alloy Steel］
（58HRC～）		Standard BlockStandard Length-ES-RVR-ES-RV2Rnone24
28
33		Blank ： Standard
G ： G Grease
L ： L Grease
Y ： Y Grease
H ： H Grease
1mm Increment
（Specified		-ES-RVRL-ES-RV2RL
Wide Block
Through Hole		Standard Length-ES-RVW-ES-RV2W
1mm Increment
（Specified）		-ES-RVWL-ES-RV2WL
Wide Block
Tapped Hole		Standard Length-ES-RVWT-ES-RV2WT
1mm Increment
（Specified）		-ES-RVWTL-ES-RV2WTL

1Materials of each part can be checked here>> Misumi linear guide product information

2Standard Length of selectable length type (Fixed Length) can be checked "Standard Length (Fixed Length) List or here to refer
If the require rail length is not available in the selectable length type, please select the 1mm specification (specified size).

33 blocks and 4 blocks option is available. Please compete part no. of single block type, then andd [-B3] or [-B4] as alteration.

        If you request more than5 blocks, please see details here.>>Click 

4For detail on varios types of grease, see details here>>Click *MX（Lubrication Unit）Type: standard Lithium grease filled and no other choice.

!Operating Temperature for this prodcut is −20〜80℃

!About Low Temperature Black Chrome Plating, see more details here>>click

[NG] Blocks or Rails  are can't be purchased individually (sold as SET items)

Part No. example

Type
 
Height H
 
Grease-Rail Length L-
Alterations
 
A  B
 
C
 
D
 
 
 
 
 
ES-SVR
 
24
 
 
-
940
 
 
（ES-SVR24-940）
ES-SV2RL-MX
 
24
 
 
-
940
-
WC
（ES-SV2RL-MX24-940-WC）
ES-RVWTL
 
24
 
Y
-
940
-
TMS-B3
（ES-RVWTL24Y-938-TMS-B3）

Dimensional Drawing

■Dimension of MX(Lubrication Unit)Attached Standard Block Wide Block 中荷重用リニアガイド普通すきま:関連画像
[ ! ]Dimension "G" of L specified Type is not same as the value on the table below. Please refere to the chart. 
[NG] Block and Rail can't be purchased individually(sold as set items)
 
■H・W2 Dimensional Accuracy
Product
Category		SpecificationsAssemblle Height
H
(mm)		Precision Grade
（μm）
HighNormal
Medium・Heavy
Load
Linear Guide		Normal
Clearance		Height H Tolerance24～33
±40
±100
Pair Variation of Height H
15
20
Width W2 Tolerance
±20
±100
Pair Variation of Width W224・28
15
20
33
15
30
［！］Dimensional Accuracy and Preload(Clearance), see >>Click.
■Other Dimensional Tolerance
Length RangeTolerance
（mm）
OverOr less
0.5
3
±0.1
3
6
±0.1
6
30
±0.2
30
120
±0.3
120
400
±0.5
400
1000
±0.8
1000
2000
±1.2
JIS B 0405-1991 Grade m(medium) Compliant

Specification

BlockHeight(H)L
5		Block DimensionRail Dimension
WL1BS×ℓ6L2KTCbGrease NippleH1W1W2CaConterboredFG
7
StandardWith MXTapped
Hole		Through
Hole		Mounting HoleET1d1×d2×h
Standard
Block		24100～1480
(160)		344150.626M4×7
―
252070.85M5×P0.86512.5159.50.53.5×6×4.56020
28160～1960
(220)		424756.632M5×8
―
27.622.57.51.0M6×P0.7513615.520110.66×9.5×8.56020
33160～1960
(220)		485968.635M6×9
―
3726.581.0M6×P0.75136.8182312.50.87×11×96020
Wide
Block		24100～1480
(160)		524150.641M5
(Through)		φ4.5
(Through)		252070.5M5×P0.86512.51518.50.53.5×6×4.56020
28160～1960
(220)		594756.649M6
(Through)		φ5.5
(Through)		27.622.591.0M6×P0.7513615.52019.50.66×9.5×8.56020
33160～1960
(220)		735968.660M8
(Through)		φ7
(Through)		3726.5101.0M6×P0.75136.81823250.87×11×96020

5( )Dimension is the shortest Length for 2 blocks type

6Wide Blocks have 2 choice of Tapped Holes and Through Holes and the depth of the hole is through type.

7Length Specified type are cut evenly on both side(left and right). In this case, G dimesnion will be different from the value in chart above. Calculation method: see below.>>click

!High Precision Grade can't be selected with the length below(Normal Grade only).
H24:L=1001mm～1480mm
H28 and H33: L＝1241mm～1960mm

!Grease Nipple：H24 has Straight Nipple, H28 has side fowarded Nipple.

!Grease Nipple posiion can be changed, since it is screw-in type.

!Hex Socket Cap Screw.>>Click

!Correctly align the datum planes (the sides with the straight grooves) of both the rail and block when installation. For details, see "Installation and handling" below.

Standard Length (Fixed Length) List

The table below shows the list of selctable length.
Length which you can not find here is also available as "configurable length type" specified with 1mm increments. 

Height
( H )		Rail Length
( L )
24(100)16022028034040046052058064070076082088094010001120124013601480   
28(160)220280340400460520580640700760820880940100011201240136014801600172018401960
33(160)220280340400460520580640700760820880940100011201240136014801600172018401960

!( ) this length is availalbe with single blocks type only. 

!Maximum Length of Low Temp Black Chrome Plating Type is L 1,000mm.

Basic Rated Load / Allowalbe Static Moment / Mass

kgf=N×0.101972

HBasic Rated Load8Static Allowable MomentMass
C（Dynamic）
kN		Co（Static）
kN		Single Block Used2 Blocks Used in close contact9BlockGuide Rail
kg/m
MA
N・m		MB
N・m		MC
N・m		MA
N・m		MB
N・m		MC
N・m		Standard
kg		Wide
kg
244.58.2333.033.057.0124.3124.3114.00.150.201.5
286.4812.158.058.0135.0254.0254.0270.00.200.252.4
3310.5319.6109.0109.0225.0582.3582.3450.00.300.403.4

8The basic rated load is the same for the four directions that act on the block (radial direction, reverse radial direction, and lateral direction). It can be used in any position.

9The static allowable moment when two blocks are in close contact is a reference value, not a guaranteed value.

  • The allowable load and moment of the linear guide are determined by dividing each value (table above) by the static safety factor fs (table below).For details>>Click
    ex）Under nomal operating condition: Allowalble load for H24 Type（kN）⇒ 8.23/2＝4.12 （apploximately 420kg）

Static Safety Factor(fs lower limit)

Conditionfs lower limit
For nomal operating condtion1～2
When smooth running performance is required2～4
When variatoin and impact exist3～5

Allowable load (N)≦ Co/fs
Allowable Moment (N・m)≦ (MA,MB,MC)/fs

fs:Static Safety Factor　Co:Basic Static Rated Load
MA, MB, MC :Allowable Static Moment(N・m)

Installation and Handling

■Datum Side and Mounting Direction

  • Datum side has Datum Plane Mark(Groove), see  Figure Ａ. Blocks and Rails must have the same datum side when use.
  • Various Mounting Direction is availalbe having the same Basic Rated Load, see Figure B 
  • Tapped Hole or Through Hole can be selected with Wide Block Type, see Figure C
A
B

C

Wide Block Tapped Hole
Wide Block Through Hole

■Precaution of use

  • Although the retaining wire prevents the balls from falling off, care must be taken when attaching and detaching the block. Click here for details>>click
  • If the block and rail are not used in original combination, radial clearance and accuracy cannot be guaranteed.
  • It is not possible to extend the length by adding rails on the same axis.This is because the assembly accuracy between the two cut surfaces is not guaranteed.
  • Dimensional Accurarcy of Linear Guides is guranteed after fixation of the rail (Screw Mounting and pushed to the datum side）.
    The rail bends before are forced by fixation. so there is no probelm in using it.

■About Grease

  • When shipping ES Linear Guides, Lithium Soaped based Grease（Alvania Grease S2 by Showa Shell Sekiyu） is filled.
    Other Brand's Grease is not reccomended to be filled. Please adopt the same brand&s grease for maintenance.
  • Grease Nipple：H24 has Straight Nipple, H28 and H33 has side fowarded Nipple
  • Gease Nipple posiion can be changed, since it is screw-in type.

■Standard Grease Nipple Position

  • When the datum side is facing you, the grease nipple will be attached in the direction shown in the diagram below.
■Lubricatoin Unit "MX"
Advantages of Lubrication Unit "MX"
Buit-in porous core part impregnated with oil.
Achieves long-term maintenance-free operation.
Reduce maintenance costs.
Ideal for locations where lubrication is not possible due to design.
See more detail>>Click

■Others

Alterations

CodeAlterationsSpecificationPrecaution
TMS
TMC		TMS：Tapped Hole machining+fallout prevention Plate
TMC：Tapped Hole machining
・Tapped Hole machined on both sides to install fallout prevension plates.

・M3×P0.5 Depth 5mm
・2pcs of Fallout prevension Plate attached
・For more detaile abou Fallout prevension Plate>>Click		 
LLC
RLC		LLC：Left End Cut
RLC：Right End Cut
・Cut Rail End
・Rail is cut with the prodcut ID facing side( datum on other side)
・Please see cut length of each size below.
HCut LN
241010
28
33
!Overall length wll be shorter by cutting.
ex）ES-SVR24-880-LLC: has L 870mm.
!Applicable  to Standard Length type only.
!Not applicable to L100 of H24.
WCParallel Use of 2 Rails
・Please specify when using two axes in parallel.
・Pair variation o fHeight H between 2 Rails is set within 20µm
・Rails are shipped in pairs		!Speciify the actual rail quantity(even number) to order.
in the case of the order an odd number, it will be treated as an error.
!Not applicable to High Grade Type
!Not applicable to Low Temp Black Chrome Plating Type
B3
B4		B3：add blocks（total 3pcs）
B4：add blocks（total 4pcs）

3 blocks specification


4 blocks specification

・Shipped as 3 blocks (4 blocks) to single block type.
・There are limits of rail length L
 See "selectable shortest rail length" for details.		!Single block part no need to be selected for this opiton and the case below is NG example( 2blocks type is selected)
  （NG: ES-SV2R24-880-B4）
!Not applicable to High Grade Type

Accessories

Block
Shape		Height（H）Linear Guide ClamperRail Cap
Knob TypeLever Type
S45C
Equivalent		SUS304S45C
Equivalent		SUS304
Standard

Wide		24SVCN24SSVCN24SVCK24SSVCK24PACK-SGLC3
28SVCN28SSVCN28SVCK28SSVCK28PACK-SGLC5
33SVCN33SSVCN33SVCK33SSVCK33PACK-SGLC6
 
Block
Shape		Height
（H）		Linear Guide Height Adjustment Block
＜Economy Type＞		Linear Guide Height Adjustment Block
＜Precision Type＞
General
Structural Steel		Aluminum AlloyS45C EquivalentAluminum Alloy
Datum SideFree SideDatum SideFree Side
L SelectableL SpecifiedL SelectableL SpecifiedL SelectableL SpecifiedL SelectableL SpecifiedL SelectableL SpecifiedL SelectableL Specified
Standard

Wide		24LGBE24LGBEL24ALGBE24ALGBEL24BETA24BETAL24BETE24BETEL24ABETA24ABETAL24ABETE24ABETEL24
28LGBE28LGBEL28ALGBE28ALGBEL28BETA28BETAL28BETE28BETEL28ABETA28ABETAL28ABETE28ABETEL28
33LGBE33LGBEL33ALGBE33ALGBEL33BETA33BETAL33BETE33BETEL33ABETA33ABETAL33ABETE33ABETEL33

■Accessories
DescriptionClampingHeight AdjustmentBlock fallout PreventionRail Push PlateLinear LockLinear Guide LockBlock fallout PreventionRail Cap
Representative TypeSVCNBETASBLTSGULLTLLTGSVPPACK-SGLC
Image

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
45
60
  1. 1
Part Number
ES-SVW24H
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngRail Length L
(mm) 		Block Type Rail Width W1
(mm) 		Assembly Height H
(mm) 		Nominal Part Number Accuracy Standards No. of Blocks Basic Load Rating: Dynamic Load
(N) 		Basic Load Rating: Static Load
(N) 		Allowable Static Moment MA
(N⋅m) 		Allowable Static Moment MB
(N⋅m) 		Allowable Static Moment MC
(N⋅m) 		Surface Treatment Lubrication Type L Dimension Type Material-Grease Nipple

-

1 Piece(s) 8 Day(s) -[Wide] Wide Block Cross-Through Holes152415Standard Grade145008230333357noneGrease for food sector (H Type)Selectable TypeElectroless Nickel Plating

Loading...Tải…

  1. 1

G Dimension

[G] Dimension of Length Specifified Type requires calculation.
Please refer to the below table and formula.
*[G] Dimension of Fixed Length: Please refer to the specification table. (no calculation required)



■ ES Linear Guide -Rail Dimension-
Assemble
Height
H		242833# of Mounting Holes M
Rail
Length

L		100～131100～139100～1412
132～191140～199142～2013
192～251200～259202～2614
252～311260～319262～3215
312～371320～379322～3816
372～431380～439382～4417
432～491440～499442～5018
492～551500～559502～5619
552～611560～619562～62110
612～671620～679622～68111
672～731680～739682～74112
732～791740～799742～80113
792～851800～859802～86114
852～911860～919862～92115
912～971920～979922～98116
972～1031980～1039982～104117
1032～10911040～10991042～110118
1092～11511100～11591102～116119
1152～12111160～12191162～122120
1212～12711220～12791222～128121
1272～13311280～13391282～134122
1332～13911340～13991342～140123
1392～14511400～14591402～146124
1452～15111460～15191462～152125
1512～15711520～15791522～158126
1572～16311580～16391582～164127
1632～16911640～16991642～170128
1692～17511700～17591702～176129
1752～18111760～18191762～182130
1812～18711820～18791822～188131
1872～19311880～19391882～194132
1932～19601940～19601942～196033
F
Pitch of
Mounting Hole		606060 



Grease Option
TypeGreaseFeature
 StandardAlvania S2
(Made by Shell）		An industrial all-purpose grease suitable for a variety of grease lubrication locations.
 YAFF
（Made by THK）		A grease with low dust generation, stable rolling resistance, and excellent fretting resistance.
 GLG2
（Made by NSK）		A grease that generates little dust and has excellent wear resistance and rust prevention properties. (Special grease for linear guides, ball screws and etc. for clean-room use)
 LET-100K
（Made by Kyodo Yushi）		Excels in heat resistance, oxidation stability, adhesion and adhesive power. In addition, splash or leakage is little
 H FGL（Lubriplate®）Suitable for lubrication of processing and filling equipment for food, beverages, and pharmaceuticals.(NSF H-1 registration NO.043534)

Basic InformationThông tin cơ bản

Rail Type Standard Rail Set / Single Item Set Preload Normal Clearance
Material Carbon Steel Ball Arrangement Medium, Heavy Load Type Retainer N/A
Lubrication Type Lubrication Applied Rolling Element Ball Block Material Carbon Steel
Material-Ball Carbon Steel Material-Return Cap POM Material-Side Seal Stainless Steel+Nitril Rubber(NBR)
Material-Under Seal Nitril Rubber(NBR) Material-Under Retainer Stainless Steel Material-Upper Retainer Stainless Steel
Material-Middle Retainer Stainless Steel

Please check the type/dimensions/specifications of the part ES-SVW24H in the ES Linear Guides for Medium Load (Normal Clearance) [RoHS Compliant] series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần ES-SVW24H trong chuỗi ES Linear Guides for Medium Load (Normal Clearance) [RoHS Compliant].

Products like this...

Part Number
ES-RV2RL28Y
ES-RV2RL33Y
ES-RV2W28H
ES-SVW24Y
ES-SVW28H
ES-SVW28Y
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipSố ngày giao hàngRail Length L
(mm) 		Block Type Rail Width W1
(mm) 		Assembly Height H
(mm) 		Nominal Part Number Accuracy Standards No. of Blocks Basic Load Rating: Dynamic Load
(N) 		Basic Load Rating: Static Load
(N) 		Allowable Static Moment MA
(N⋅m) 		Allowable Static Moment MB
(N⋅m) 		Allowable Static Moment MC
(N⋅m) 		Surface Treatment Lubrication Type L Dimension Type Material-Grease Nipple

-

1 Piece(s) 8 Day(s) -[Standard] Standard Block202820Standard Grade26480121005858135Low Temperature Black Chrome PlatingLow Dust Generation Grease (Y Type)Configurable Type-

-

1 Piece(s) 8 Day(s) -[Standard] Standard Block233325Standard Grade21053019600109109225Low Temperature Black Chrome PlatingLow Dust Generation Grease (Y Type)Configurable Type-

-

1 Piece(s) 11 Day(s) -[Wide] Wide Block Cross-Through Holes202820Standard Grade16480121005858135Low Temperature Black Chrome PlatingGrease for food sector (H Type)Selectable Type-

-

1 Piece(s) 8 Day(s) -[Wide] Wide Block Cross-Through Holes152415Standard Grade145008230333357noneLow Dust Generation Grease (Y Type)Selectable TypeElectroless Nickel Plating

-

1 Piece(s) 8 Day(s) -[Wide] Wide Block Cross-Through Holes202820Standard Grade16480121005858135noneGrease for food sector (H Type)Selectable TypeElectroless Nickel Plating

-

1 Piece(s) 8 Day(s) -[Wide] Wide Block Cross-Through Holes202820Standard Grade16480121005858135noneLow Dust Generation Grease (Y Type)Selectable TypeElectroless Nickel Plating

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.