(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.
·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)
·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Part Number |
---|
TSC-LS-HEM4S12-10 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Figure | Under Neck Diameter d1 (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3,790,317 VND | 1 Piece(s) | Available | 4 Day(s) or more | 12 | 18 | 10 | 160 | - | With Lead | 3 | - |
Loading...Tải…
Model Number | Shank Diameter d |
Flute Length ℓ |
Under Neck Diameter d1 |
Length Under Neck ℓ1 |
Overall Length L |
Figure | ||
Outer Diameter D |
Shank Diameter d |
|||||||
TSC-LS-HEM4S (Standard) TSC-LS-HPEM4S (Sharp Edge) |
2 | — | 6 | 3.5 |
1.9 |
30 |
80 | 1 |
2.5 | — | 6 | 4.5 |
2.4 |
30 |
80 | 1 | |
3 | — | 6 | 5 |
2.9 |
30 |
80 | 1 | |
4 | — | 6 | 6 |
3.8 |
35 |
80 | 1 | |
5 | — | 6 | 8 |
4.8 |
50 |
100 | 1 | |
6 | — | 6 | 9 |
5.7 |
70 |
120 | 2 | |
7 | — | 6 | 12 | — | — | 135 | 3 | |
8 |
6 |
6 | 12 | — | — | 135 | 3 | |
8 | — | 8 | 12 |
7.6 |
85 |
135 | 2 | |
9 | — | 8 | 13 | — | — | 135 | 3 | |
10 |
8 |
8 | 15 | — | — | 150 | 3 | |
10 | — | 10 | 15 |
9.5 |
100 |
150 | 2 | |
11 | — | 10 | 18 | — | — | 160 | 3 | |
12 |
10 |
10 | 18 | — | — | 160 | 3 | |
12 | — | 12 | 18 |
11.5 |
108 |
160 | 2 | |
13 | — | 12 | 20 | — | — | 160 | 3 | |
16 | — | 16 | 24 |
15.5 |
120 |
180 | 2 | |
17 | — | 16 | 25 | — | — | 180 | 3 | |
18 | — | 16 | 26 | — | — | 180 | 3 | |
20 | — | 20 | 30 |
19.5 |
140 |
200 | 2 | |
22 | — | 20 | 30 | — | — | 200 | 3 |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
For Cutting Conditions, Refer to >>Click here.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● The rounded edge of the blade rear end suppresses machining streaks caused by the multi-stage machining of side surfaces. (Product in figure 3 only)
Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Square |
---|---|---|---|---|---|
Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
Please check the type/dimensions/specifications of the part TSC-LS-HEM4S12-10 in the TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần TSC-LS-HEM4S12-10 trong chuỗi TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model.
Part Number |
---|
TSC-LS-HEM4S10-8 |
TSC-LS-HEM4S11 |
TSC-LS-HEM4S12 |
TSC-LS-HEM4S13 |
TSC-LS-HEM4S16 |
TSC-LS-HEM4S17 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Figure | Under Neck Diameter d1 (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3,198,113 VND | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 15 | 8 | 150 | - | With Lead | 3 | - | |
4,468,952 VND | 1 Piece(s) | Available | 4 Day(s) or more | 11 | 18 | 10 | 160 | - | With Lead | 3 | - | |
3,102,818 VND | 1 Piece(s) | Available | 4 Day(s) or more | 12 | 18 | 12 | 160 | 108 | With Lead | 2 | 11.5 | |
4,157,734 VND | 1 Piece(s) | Available | 4 Day(s) or more | 13 | 20 | 12 | 160 | - | With Lead | 3 | - | |
5,684,330 VND | 1 Piece(s) | Available | 4 Day(s) or more | 16 | 24 | 16 | 180 | 120 | With Lead | 2 | 15.5 | |
10,736,836 VND | 1 Piece(s) | Available | 4 Day(s) or more | 17 | 25 | 16 | 180 | - | With Lead | 3 | - |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy