(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (ICT) 16/12/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

TSC-PEM2LB0.9-10

Processing Applications type Outer Diameter (D) Flute Length (ℓ) Shank Diameter (d) Overall Length (L) Length Under Neck (ℓ1) Geometry Torsion Angle (θ) Additional Classification Days to Ship

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Processing Applications
- Flat Surface
- Side Surface
- Groove
- Inclined Cutting
- Countersunk
ClearTrống
type
- LN-TSC-EM2S
- LN-TSC-PEM2S
- TSC-EM2LB
- TSC-PEM2LB
ClearTrống
Outer Diameter (D)(φ)
0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2.5

3

4

5

6
ClearTrống
Flute Length (ℓ)(mm)
0.2

0.3

0.45

0.6

0.7

0.9

1.05

1.2

1.35

1.5

1.8

2.1

2.3

2.4

2.7

3

3.2

3.6

3.8

4

4.5

5

6

7.5

8

9

10
ClearTrống
Shank Diameter (d)(mm)
4

6
ClearTrống
Overall Length (L)(mm)
40

45

50

70

100
ClearTrống
Length Under Neck (ℓ1)(mm)
0.3

0.5

1

1.5

2

2.5

3

4

5

6

7

8

9

10

12

14

15

16

18

20

22

24

25

26

30

35

40

45

50

60
ClearTrống
Geometry
- Sharp Corner
- With Lead
ClearTrống
Torsion Angle (θ)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
ClearTrống
Additional Classification
- Manufactured Product
- Stocked Product
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

4 Day(s) or Less

8 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

TSC series carbide long neck square end mill, 2-flute / long neck model (TSC-PEM2LB0.9-10)

Name: TSC series carbide long neck square end mill, 2-flute / long neck model
Brand: MISUMI
Price: 526519 VND
Availability: PreOrder

TSC series carbide long neck square end mill, 2-flute / long neck model (TSC-PEM2LB0.9-10)

Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.

Move the mouse over or click the image to zoom

Volume Discount

TS
General Steel
2 Flutes

Brand :

MISUMI

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

Product Description

[Features]
·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)
·Can select optimal body length for processing deep parts of workpiece
·Optimal for machining in low to medium rotation range due to the general-purpose 30° helix angle
·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

: 30; 45; 60

Part Number
TSC-PEM2LB0.9-10

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Processing Applications	Geometry	Torsion Angle (θ)	Additional Classification	Figure	● Inventory Product □ Manufacturer Product	Under Neck Diameter d1 (mm)	Actual Effective Length Depends on Work Inclination Angle 30' (mm)	Actual Effective Length Depends on Work Inclination Angle 1° (mm)	Actual Effective Length Depends on Work Inclination Angle 2° (mm)	Actual Effective Length Depends on Work Inclination Angle 3° (mm)	Length Under Neck (θ)
	526,519 VND	1 Piece(s)	Available	4 Day(s) or more	0.9	1.35	4	50	10	Flat Surface / Side Surface / Groove / Inclined Cutting	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.85	10.47	10.99	12.21	13.73	10°

Loading...Tải…

Specifications

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.1	0.3	-	4	No Standards	●	0.2	0.085	50	10°	0.31	0.33	0.37	0.41	1
	0.5			No Standards	●					0.52	0.55	0.61	0.69
	1			No Standards	●					1.05	1.10	1.22	1.37
0.2	0.5	-	4	No Standards	●	0.3	0.18	50	10°	0.52	0.55	0.61	0.69	1
	1			●	●					1.05	1.10	1.22	1.37
	1.5			●	●					1.57	1.65	1.83	2.06
	2			No Standards	●					2.09	2.20	2.44	2.75
	2.5			No Standards	●					2.62	2.75	3.05	3.43
	3			No Standards	●					3.14	3.30	3.66	4.12
	3.5			No Standards	●					3.66	3.85	4.27	4.81
	4			No Standards	●					4.19	4.40	4.88	5.49
0.3	1	-	4	●	●	0.45	0.28	50	10°	1.05	1.10	1.22	1.37	1
	1.5			No Standards	●					1.57	1.65	1.83	2.06
	2			●	●					2.09	2.20	2.44	2.75
	2.5			No Standards	●					2.62	2.75	3.05	3.43
	3			●	●					3.14	3.30	3.66	4.12
	4			●	●					4.19	4.40	4.88	5.49
	5			●	●					5.24	5.49	6.10	6.87
	6			No Standards	●					6.28	6.59	7.32	8.24
	9			No Standards	●					9.42	9.89	10.98	12.36
0.4	1	-	4	No Standards	●	0.6	0.37	50	10°	1.05	1.10	1.22	1.37	1
	2	-	4	●	●				10°	2.09	2.20	2.44	2.75
	2	6	6	●	●				15°	2.06	2.13	2.28	2.45
	3	-	4	●	●				10°	3.14	3.30	3.66	4.12
	4			●	●					4.19	4.40	4.88	5.49
	5			●	●					5.24	5.49	6.10	6.87
	6			●	●					6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			No Standards	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
TSC-PEM2LB (Sharp Edge / Stocked Product) / TSC-EM2LB (Standard / Stocked Product)

Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
0.5	1	-	4	No Standards	●	0.7	0.46	50	10°	1.05	1.10	1.22	1.37	1
	2			●	●					2.09	2.20	2.44	2.75
	3			No Standards	●					3.14	3.30	3.66	4.12
	4			●	●					4.19	4.40	4.88	5.49
	4	6	6	●	●				15°	4.13	4.26	4.56	4.91
	5	-	4	No Standards	●				10°	5.24	5.49	6.10	6.87
	6			●	●					6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	15			●	●					15.71	16.48	18.31	20.60
0.6	2	-	4	●	●	0.9	0.56	50	10°	2.09	2.20	2.44	2.75	1
	3			No Standards	●					3.14	3.30	3.66	4.12
	4			●	●					4.19	4.40	4.88	5.49
	4	6	6	●	●				15°	4.13	4.26	4.56	4.91
	6	-	4	●	●				10°	6.28	6.59	7.32	8.24
	7			No Standards	●					7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	15			●	●					15.71	16.48	18.31	20.60
	18			No Standards	●			70		18.85	19.78	21.97	24.71
0.7	2	-	4	●	●	1.05	0.66	50	10°	2.09	2.20	2.44	2.75	1
	4			●	●					4.19	4.40	4.88	5.49
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
0.8	4	-	4	●	●	1.2	0.76	50	10°	4.19	4.40	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
	20			No Standards	●			70		20.94	21.98	24.41	27.46
	24			No Standards	●			70		25.13	26.38	29.29	Without Interference
0.9	4	-	4	No Standards	●	1.35	0.85	50	10°	4.19	4.40	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	15			No Standards	●					15.71	16.48	18.31	20.60
1	3	-	4	No Standards	●	1.5	0.95	50	10°	3.14	3.30	3.66	4.12	1
	4			●	●					4.19	4.40	4.88	5.49
	5			No Standards	●					5.24	5.49	6.10	6.87
	6			●	●					6.28	6.59	7.32	8.24
	6	6	6	●	●				15°	6.19	6.39	6.84	7.36
	7	-	4	No Standards	●				10°	7.33	7.69	8.54	9.61
	8			●	●					8.38	8.79	9.76	10.98
	9			No Standards	●					9.42	9.89	10.98	12.36
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			No Standards	●			70		18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	27.46
	22			No Standards	●					23.04	24.18	26.85	Without Interference
	25			●	●					26.18	27.47	30.51	Without Interference
	30			●	●					31.41	32.97	36.62	Without Interference
1.2	6	-	4	●	●	1.8	1.15	50	10°	6.28	6.59	7.32	8.24	1
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	16			●	●					16.75	17.58	19.53	21.97

Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
1.4	6	-	4	No Standards	●	2.1	1.35	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
1.5	4	-	4	No Standards	●	2.3	1.45	50	10°	4.19	4.40	4.88	5.49	1
	6			●	●					6.28	6.59	7.32	8.24
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			●	●			70		18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	30.51	Without Interference
	30			No Standards	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			No Standards	●					41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
1.6	6	-	4	No Standards	●	2.4	1.55	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	21.97
	18			No Standards	●			70		18.85	19.78	21.97	Without Interference
	20			No Standards	●					20.94	21.98	24.41	Without Interference
	26			No Standards	●					27.22	28.57	31.73	Without Interference
1.8	6	-	4	No Standards	●	2.7	1.75	50	10°	6.28	6.59	7.32	8.24	1
	8			No Standards	●					8.38	8.79	9.76	10.98
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			No Standards	●					12.57	13.19	14.65	16.48
	14			No Standards	●					14.66	15.39	17.09	19.22
	16			No Standards	●					16.75	17.58	19.53	Without Interference
	18			No Standards	●			70		18.85	19.78	21.97	Without Interference
	20			No Standards	●					20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	30.51	Without Interference
2	6	-	4	●	●	3	1.95	50	10°	6.28	6.59	7.32	8.24	1
	8			●	●					8.38	8.79	9.76	10.98
	10			●	●					10.47	10.99	12.21	13.73
	10	6	6	●	●				15°	10.31	10.65	11.40	12.27
	12	-	4	●	●				10°	12.57	13.19	14.65	16.48
	14			●	●					14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	Without Interference
	18			●	●			70		18.85	19.78	21.97	Without Interference
	20			●	●					20.94	21.98	24.41	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			No Standards	●					41.88	43.96	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
	60			No Standards	●					62.83	Without Interference	Without Interference	Without Interference
2.5	8	-	4	●	●	3.8	2.4	50	10°	8.38	8.79	9.76	10.98	1
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	Without Interference
	14			No Standards	●					14.66	15.39	17.09	Without Interference
	16			●	●					16.75	17.58	19.53	Without Interference
	18			No Standards	●			70		18.85	19.78	Without Interference	Without Interference
	20			●	●					20.94	21.98	Without Interference	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	40			No Standards	●			100		41.88	Without Interference	Without Interference	Without Interference
	50			No Standards	●			100		52.35	Without Interference	Without Interference	Without Interference

Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	Actual Effective Length Depends on Work Inclination Angle				Figure
Outer Diameter D	Length Under Neck ℓ1	Shank Diameter d	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Under Neck Angle θ	30'	1°	2°	3°	Figure
3	8	-	6	●	●	4.5	2.9	50	10°	8.38	8.79	9.76	10.98	1
	10			No Standards	●					10.47	10.99	12.21	13.73
	12			●	●					12.57	13.19	14.65	16.48
	14			No Standards	●			70		14.66	15.39	17.09	19.22
	16			●	●					16.75	17.58	19.53	21.97
	18			No Standards	●					18.85	19.78	21.97	24.71
	20			●	●					20.94	21.98	24.41	27.46
	25			●	●					26.18	27.47	30.51	Without Interference
	30			●	●					31.41	32.97	36.62	Without Interference
	40			●	●			100		41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
4	12	-	6	●	●	6	3.8	50	10°	12.57	13.19	14.65	16.48	1
	16			●	●			50		16.75	17.58	19.53	Without Interference
	20			●	●			70		20.94	21.98	24.41	Without Interference
	25			No Standards	●					26.18	27.47	Without Interference	Without Interference
	30			●	●					31.41	32.97	Without Interference	Without Interference
	35			No Standards	●			100		36.65	38.46	Without Interference	Without Interference
	40			●	●					41.88	43.96	Without Interference	Without Interference
	45			No Standards	●					47.12	49.45	Without Interference	Without Interference
	50			No Standards	●					52.35	54.95	Without Interference	Without Interference
5	16	-	6	●	●	7.5	4.8	70	10°	16.75	17.58	Without Interference	Without Interference	1
	20			No Standards	●					20.94	21.98	Without Interference	Without Interference
	25			●	●					26.18	27.47	Without Interference	Without Interference
	30			No Standards	●					31.41	Without Interference	Without Interference	Without Interference
	35			●	●			100		36.65	Without Interference	Without Interference	Without Interference
	40			No Standards	●					41.88	Without Interference	Without Interference	Without Interference
	50			●	●					52.35	Without Interference	Without Interference	Without Interference
6	20	-	6	●	●	9	5.8	70	10°	Without Interference	Without Interference	Without Interference	Without Interference	2
	30			●	●			70		Without Interference	Without Interference	Without Interference	Without Interference
	40			●	●			100		Without Interference	Without Interference	Without Interference	Without Interference
	50			●	●					Without Interference	Without Interference	Without Interference	Without Interference
	60			●	●					Without Interference	Without Interference	Without Interference	Without Interference

[ ! ]For shank diameter (d) specifications listed in blue, specify a outer diameter (D), shank length (ℓ1) and shank diameter (d).

Model Number
LN-TSC-PEM2S (Sharp Edge / Manufactured Product) / LN-TSC-EM2S (Standard / Manufactured Product)

Outer Diameter D	Length Under Neck ℓ1 1 mm Increment Designation	Shank Diameter d	Standard	Sharp Edge	Flute Length ℓ	Under Neck Diameter d1	Overall Length L	Figure
1.5	8 ~ 20	4	●	●	3	1.45	40	3
1.6	9 ~ 20	4	●	●	3.2	1.55	40	3
1.8	9 ~ 20	4	●	●	3.6	1.75	40	3
2	9 ~ 21	4	●	●	4	1.95	40	3
2.5	10 ~ 22	4	●	●	5	2.4	40	3
3	11 ~ 21	6	●	●	6	2.9	45	3
4	13 ~ 23	6	●	●	8	3.8	45	3
5	15 ~ 25	6	●	●	10	4.8	45	3

[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number

More Information

● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining.

TSC series carbide long neck square end mill, 2-flute / long neck model:Related Image

Basic InformationThông tin cơ bản

Work Material	General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy	Number of Flutes(sheet)	2	Model	Long Neck Square
Coating	For High Hardness (Silicone-Based)	Tolerance of OD(mm)	0 ~ -0.02

Please check the type/dimensions/specifications of the part TSC-PEM2LB0.9-10 in the TSC series carbide long neck square end mill, 2-flute / long neck model series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần TSC-PEM2LB0.9-10 trong chuỗi TSC series carbide long neck square end mill, 2-flute / long neck model.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Products like this...

Part Number
TSC-EM2LB0.3-2
TSC-EM2LB0.3-3
TSC-EM2LB0.3-4
TSC-PEM2LB0.9-15
TSC-PEM2LB0.9-4
TSC-PEM2LB0.9-6

Standard Unit Price	Minimum order quantity	Volume Discount	Days to ShipSố ngày giao hàng	Outer Diameter (D) (φ)	Flute Length (ℓ) (mm)	Shank Diameter (d) (mm)	Overall Length (L) (mm)	Length Under Neck (ℓ1) (mm)	Processing Applications	Geometry	Torsion Angle (θ)	Additional Classification	Figure	● Inventory Product □ Manufacturer Product	Under Neck Diameter d1 (mm)	Actual Effective Length Depends on Work Inclination Angle 30' (mm)	Actual Effective Length Depends on Work Inclination Angle 1° (mm)	Actual Effective Length Depends on Work Inclination Angle 2° (mm)	Actual Effective Length Depends on Work Inclination Angle 3° (mm)	Length Under Neck (θ)
739,839 VND	1 Piece(s)	Available	4 Day(s) or more	0.3	0.45	4	50	2	Inclined Cutting / Groove / Flat Surface / Side Surface	With Lead	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	2.09	2.2	2.44	2.75	10°
805,106 VND	1 Piece(s)	Available	4 Day(s) or more	0.3	0.45	4	50	3	Inclined Cutting / Groove / Flat Surface / Side Surface	With Lead	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	3.14	3.3	3.66	4.12	10°
1,071,806 VND	1 Piece(s)	Available	4 Day(s) or more	0.3	0.45	4	50	4	Inclined Cutting / Groove / Flat Surface / Side Surface	With Lead	Standard Helix (30 to 40°)	Stocked Product	1	●	0.28	4.19	4.4	4.88	5.49	10°
771,026 VND	1 Piece(s)	Available	4 Day(s) or more	0.9	1.35	4	50	15	Inclined Cutting / Groove / Flat Surface / Side Surface	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.85	15.71	16.48	18.31	20.6	10°
479,185 VND	1 Piece(s)	Available	4 Day(s) or more	0.9	1.35	4	50	4	Inclined Cutting / Groove / Flat Surface / Side Surface	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.85	4.19	4.4	4.88	5.49	10°
520,680 VND	1 Piece(s)	Available	4 Day(s) or more	0.9	1.35	4	50	6	Inclined Cutting / Groove / Flat Surface / Side Surface	Sharp Corner	Standard Helix (30 to 40°)	Stocked Product	1	●	0.85	6.28	6.59	7.32	8.24	10°

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Processing Applications

type

Outer Diameter (D)(φ)

Flute Length (ℓ)(mm)

Shank Diameter (d)(mm)

Overall Length (L)(mm)

Length Under Neck (ℓ1)(mm)

Geometry

Torsion Angle (θ)

Additional Classification