(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Caution
thận trọng
An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Block Type | Nominal Part Number | Material | Block Mounting Hole Pitch (Width Direction) (mm) | Block Mounting Hole Pitch (Length Direction) (mm) | Block Mounting Hole Diameter | Rail Mounting Hole Pitch (mm) | Rail Mounting Hole Diameter | Block External Dimension W (mm) | Block External Dimension L (mm) | Mounting hole for blocks | Mounting Hole Dimension S (M) | Mounting Hole Dimension H (ø) | Mounting Hole Screw Depth (mm) | Block Dimension L1 (mm) | Symbols for Dust Resistance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
2,156,811 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 15 | Carbon Steel | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 56.6 | Drilled Hole | - | 4.5 | Through | 38.8 | No | ||
2,345,260 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 15 | Carbon Steel | 38 | 30 | 4.5 | 60 | 4.5 | 47 | 56.6 | Drilled Hole | - | 4.5 | Through | 38.8 | End seal | ||
1,630,768 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 15 | Carbon Steel | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Holes | M4 | - | 5 | 38.8 | No | ||
4,141,546 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 15 | Stainless Steel | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Holes | M4 | - | 5 | 38.8 | No | ||
1,859,255 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 15 | Carbon Steel | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Holes | M4 | - | 5 | 38.8 | Seal (end+side+inner) | ||
3,783,676 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 15 | Stainless Steel | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Holes | M4 | - | 5 | 38.8 | Seal (end+side+inner) | ||
2,345,260 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 15 | Carbon Steel | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Holes | M4 | - | 5 | 38.8 | End seal | ||
4,363,065 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 15 | Stainless Steel | 26 | 26 | 4 | 60 | 4.5 | 34 | 56.6 | Tapped Holes | M4 | - | 5 | 38.8 | End seal | ||
2,420,561 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 20 | Carbon Steel | 53 | 40 | 6 | 60 | 4.5 | 63 | 74 | Drilled Hole | - | 6 | Through | 50.8 | No | ||
2,609,010 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 20 | Carbon Steel | 53 | 40 | 6 | 60 | 4.5 | 63 | 74 | Drilled Hole | - | 6 | Through | 50.8 | End seal | ||
2,872,360 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 20 | Carbon Steel | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Tapped Holes | M6 | - | Through | 66.8 | No | ||
3,136,110 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 20 | Carbon Steel | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Tapped Holes | M6 | - | Through | 66.8 | Seal (end+side+inner) | ||
3,060,810 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 20 | Carbon Steel | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Tapped Holes | M6 | - | Through | 66.8 | End seal | ||
2,872,360 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 20 | Carbon Steel | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Drilled Hole | - | 6 | Through | 66.8 | No | ||
3,136,110 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 20 | Carbon Steel | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Drilled Hole | - | 6 | Through | 66.8 | Seal (end+side+inner) | ||
3,060,810 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 20 | Carbon Steel | 53 | 40 | 6 | 60 | 4.5 | 63 | 90 | Drilled Hole | - | 6 | Through | 66.8 | End seal | ||
2,872,360 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 20 | Carbon Steel | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Holes | M5 | - | 6 | 66.8 | No | ||
5,801,735 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 20 | Stainless Steel | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Holes | M5 | - | 6 | 66.8 | No | ||
2,479,007 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 20 | Carbon Steel | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Holes | M5 | - | 6 | 66.8 | Seal (end+side+inner) | ||
6,134,010 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 20 | Stainless Steel | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Holes | M5 | - | 6 | 66.8 | Seal (end+side+inner) | ||
3,060,810 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 20 | Carbon Steel | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Holes | M5 | - | 6 | 66.8 | End seal | ||
6,016,478 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 20 | Stainless Steel | 32 | 50 | 5 | 60 | 4.5 | 44 | 90 | Tapped Holes | M5 | - | 6 | 66.8 | End seal | ||
1,859,255 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 20 | Carbon Steel | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Holes | M5 | - | 6 | 50.8 | No | ||
4,879,408 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 20 | Stainless Steel | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Holes | M5 | - | 6 | 50.8 | No | ||
2,087,743 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 20 | Carbon Steel | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Holes | M5 | - | 6 | 50.8 | Seal (end+side+inner) | ||
5,211,686 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 20 | Stainless Steel | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Holes | M5 | - | 6 | 50.8 | Seal (end+side+inner) | ||
2,609,010 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 20 | Carbon Steel | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Holes | M5 | - | 6 | 50.8 | End seal | ||
5,094,153 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 20 | Stainless Steel | 32 | 36 | 5 | 60 | 4.5 | 44 | 74 | Tapped Holes | M5 | - | 6 | 50.8 | End seal | ||
3,022,961 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 25 | Carbon Steel | 57 | 45 | 7 | 60 | 7 | 70 | 83.1 | Drilled Hole | - | 7 | Through | 59.5 | End seal | ||
3,625,361 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 25 | Carbon Steel | 57 | 45 | 8 | 60 | 7 | 70 | 102.2 | Tapped Holes | M8 | - | Through | 78.6 | End seal | ||
3,324,160 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 25 | Carbon Steel | 57 | 45 | 7 | 60 | 7 | 70 | 102.2 | Drilled Hole | - | 7 | Through | 78.6 | No | ||
3,889,111 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 25 | Carbon Steel | 57 | 45 | 7 | 60 | 7 | 70 | 102.2 | Drilled Hole | - | 7 | Through | 78.6 | Seal (end+side+inner) | ||
3,625,361 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 25 | Carbon Steel | 57 | 45 | 7 | 60 | 7 | 70 | 102.2 | Drilled Hole | - | 7 | Through | 78.6 | End seal | ||
3,324,160 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 25 | Carbon Steel | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Holes | M6 | - | 8 | 78.6 | No | ||
6,576,646 VND | 1 Piece(s) | 22 Day(s) or more | 10 | Standard | 25 | Stainless Steel | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Holes | M6 | - | 8 | 78.6 | No | ||
3,889,111 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 25 | Carbon Steel | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Holes | M6 | - | 8 | 78.6 | Seal (end+side+inner) | ||
7,277,855 VND | 1 Piece(s) | 22 Day(s) or more | 10 | Standard | 25 | Stainless Steel | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Holes | M6 | - | 8 | 78.6 | Seal (end+side+inner) | ||
3,625,361 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 25 | Carbon Steel | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Holes | M6 | - | 8 | 78.6 | End seal | ||
6,967,093 VND | 1 Piece(s) | 22 Day(s) or more | 10 | Standard | 25 | Stainless Steel | 35 | 50 | 8 | 60 | 7 | 48 | 102.2 | Tapped Holes | M6 | - | 8 | 78.6 | End seal | ||
2,797,060 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 25 | Carbon Steel | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Holes | M6 | - | 8 | 59.5 | No | ||
5,506,511 VND | 1 Piece(s) | 22 Day(s) or more | 10 | Standard | 25 | Stainless Steel | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Holes | M6 | - | 8 | 59.5 | No | ||
2,674,776 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 25 | Carbon Steel | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Holes | M6 | - | 8 | 59.5 | Seal (end+side+inner) | ||
6,207,718 VND | 1 Piece(s) | 22 Day(s) or more | 10 | Standard | 25 | Stainless Steel | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Holes | M6 | - | 8 | 59.5 | Seal (end+side+inner) | ||
3,098,261 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 25 | Carbon Steel | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Holes | M6 | - | 8 | 59.5 | End seal | ||
5,896,955 VND | 1 Piece(s) | 22 Day(s) or more | 10 | Standard | 25 | Stainless Steel | 35 | 35 | 8 | 60 | 7 | 48 | 83.1 | Tapped Holes | M6 | - | 8 | 59.5 | End seal | ||
3,286,311 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 10 | 80 | 9 | 90 | 98 | Tapped Holes | M10 | - | Through | 70.4 | No | ||
3,173,561 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 9 | 80 | 9 | 90 | 98 | Drilled Hole | - | 9 | Through | 70.4 | No | ||
3,851,260 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 9 | 80 | 9 | 90 | 98 | Drilled Hole | - | 9 | Through | 70.4 | Seal (end+side+inner) | ||
3,550,060 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 9 | 80 | 9 | 90 | 98 | Drilled Hole | - | 9 | Through | 70.4 | End seal | ||
3,851,260 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 10 | 80 | 9 | 90 | 120.6 | Tapped Holes | M10 | - | Through | 93 | No | ||
4,227,760 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 10 | 80 | 9 | 90 | 120.6 | Tapped Holes | M10 | - | Through | 93 | End seal | ||
3,851,260 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 9 | 80 | 9 | 90 | 120.6 | Drilled Hole | - | 9 | Through | 93 | No | ||
4,528,961 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 9 | 80 | 9 | 90 | 120.6 | Drilled Hole | - | 9 | Through | 93 | Seal (end+side+inner) | ||
4,227,760 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Wide | 30 | Carbon Steel | 72 | 52 | 9 | 80 | 9 | 90 | 120.6 | Drilled Hole | - | 9 | Through | 93 | End seal | ||
3,851,260 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 30 | Carbon Steel | 40 | 60 | 8 | 80 | 9 | 60 | 120.6 | Tapped Holes | M8 | - | 10 | 93 | No | ||
8,716,521 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 30 | Stainless Steel | 40 | 60 | 8 | 80 | 9 | 60 | 120.6 | Tapped Holes | M8 | - | 10 | 93 | No | ||
4,528,961 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 30 | Carbon Steel | 40 | 60 | 8 | 80 | 9 | 60 | 120.6 | Tapped Holes | M8 | - | 10 | 93 | Seal (end+side+inner) | ||
9,528,090 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 30 | Stainless Steel | 40 | 60 | 8 | 80 | 9 | 60 | 120.6 | Tapped Holes | M8 | - | 10 | 93 | Seal (end+side+inner) | ||
4,227,760 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Standard | 30 | Carbon Steel | 40 | 60 | 8 | 80 | 9 | 60 | 120.6 | Tapped Holes | M8 | - | 10 | 93 | End seal | ||
9,185,056 VND | 1 Piece(s) | 18 Day(s) or more | 10 | Standard | 30 | Stainless Steel | 40 | 60 | 8 | 80 | 9 | 60 | 120.6 | Tapped Holes | M8 | - | 10 | 93 | End seal |
Loading...Tải…
Rail Type | Standard | Set / Single Item | Block only | Radial Clearance | Normal |
---|---|---|---|---|---|
Accuracy Grade | Standard Grade | Ball Arrangement | 4 Rows of Circular | No. of Blocks Used On The Same Rail | 1 |
Retainer | No | Lubrication System | No | Rolling Element | Ball |
Number of Block Mounting Holes(holes) | 4 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy