(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
Best-selling basic switch boasting high precision and wide variety. A large breaking capacity of 15A with high accuracy (repeat accuracy is good).
* Stainless steel Micro Switches
*For information on model numbers other than those listed above, please refer to the digital catalog.
Micro Switches item | Classification | |||||
---|---|---|---|---|---|---|
Model Z-15 (for microloads, excluding flexible rod type) | Model Z-01H | Model Z-15 (flexible rod type) | Model Z-10F | Model Z-15H2 | ||
Allowable Operating Speed | 0.01mm to 1m/s *1 | 1mm to 1m/s | 0.1mm~1m/s *1 | 0.01mm to 1m/s | ||
Allowable operating frequency | Mechanical | 240 times/min | 120 times/min | 240 times/min | 240 times/min | |
Micro Switches Electrical | 20 times/min | |||||
Insulation resistance | 100MΩ or more (at DC500V mega) | |||||
Contact Resistance | 15MΩ or less (initial value) | 50MΩ or less (initial value) | 15MΩ or less (initial value) | 25MΩ or less (initial value) | 15MΩ or less (initial value) | |
Withstand voltage | Contact spacing G between terminals of the same polarity 1,000V AC 50/60Hz 1min Contact spacing H 600V AC 50/60Hz 1min Contact spacing E 1,500V AC 50/60Hz 1min | Same-polarity terminal contact spacing G AC1,000V 50/60Hz 1min Contact spacing H AC600V 50/60Hz 1min | Spacing between same pole terminals F AC1,500V 50/60Hz 1min | Between same terminals AC600V 50/60Hz 1min | ||
Between live metal parts and earth, between each terminal and non-live metal parts AC2,000V 50/60Hz 1min | ||||||
vibration | malfunction | 10 to 55Hz, double amplitude 1.5mm *5 | 10 to 20Hz, double amplitude 1.5mm *5 | 10 to 55Hz, double amplitude 1.5mm *5 | ||
impact | Durability | Up to 1,000m/s2 | ||||
malfunction | Maximum 300m/s2* 2 *5 | Maximum 50m/s2* 5 | Maximum 300m/s2* 3 *5 | Maximum 100m/s2 | ||
Durability | Mechanical | Contact spacing G, H: 20 million times or more*4 Contact spacing E: 300,000 times or more | Over 1 million times | Over 500,000 times*1 | Over 20 million times | |
Micro Switches Electrical | Contact spacing G, H 500,000 times or more Contact spacing E 100,000 times or more | Over 100,000 times | Over 100,000 times | Over 500,000 times | ||
Protective structure | General form | IP00 | ||||
Micro Switches Drip-proof type | Equivalent to IP62 (excluding terminals) | |||||
Electric shock protection class | Class I | |||||
PTI (Tracking Characteristics) | 175 | |||||
Ambient temperature | General form | -25 to +80℃ (but do not freeze) | ||||
Drip-proof type | -15 to +80℃ (but do not freeze) | |||||
Ambient humidity | General form | 35~85%RH | ||||
Drip-proof type | 35~95% RH | |||||
mass | Approximately 22 to 58 g | Approximately 42-48g | Approximately 34 to 61 g | Approx. 22g |
*1. For Micro Switches type. (For lever type, the value is for the Micro Switches part.)
*2. For Z-15G Micro Switches type.
*3. Value is for Z-10FY-B type.
*4. For Micro Switches type. For types other than Micro Switches, the value is 10 million times or more.
*5. Malfunction within 1 ms
Micro Switches Drip-proof type
Standard form
Note: For the reverse action type (Z-15GM type), the NO and NC terminal arrangement is reversed.
( ) indicates lead wire
color Note : For the reverse action type (Z-15GM type), the NO and NC terminal arrangement is reversed.
Note: For the reverse action type (Z-10FM type), the NO and NC terminal arrangement is reversed.
Standard form
General form
Micro Switches Drip-proof type
Split contact type
Maintained Contact Type
Standard form
(3) Actuator type
Micro Switches Standard type (water-proof type (molded terminal type))
Model Z-15 (except for microload and flexible rod models)
Contact Spacing | Rated voltage(V) | Micro Switches item | |||||||
---|---|---|---|---|---|---|---|---|---|
Non-inductive load (A) | Inductive load (A) | ||||||||
Resistive Load | Lamp Load | Inductive Load | Motor Load | ||||||
Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | ||
G, H, H2, E | AC 125 250 500* | 15(10)* 15(10)* 10 | 3 2.5 1.5 | 1.5 1.25 0.75 | 15(10)* 15(10)* 6 | 5 3 1.5 | 2.5 1.5 0.75 | ||
G | DC 8 14 30 125 250 | 15 15 6 0.5 0.25 | 3 3 3 0.5 0.25 | 1.5 1.5 1.5 0.5 0.25 | 15 10 5 0.05 0.03 | 5 5 5 0.05 0.03 | 2.5 2.5 2.5 0.05 0.03 | ||
H, H2 | DC 8 14 30 125 250 | 15 15 2 0.4 0.2 | 3 3 2 0.4 0.2 | 1.5 1.5 1.4 0.4 0.2 | 15 10 1 0.03 0.02 | 5 5 1 0.03 0.02 | 2.5 2.5 1 0.03 0.02 | ||
E | DC 8 14 30 125 250 | 15 15 15 0.75 0.3 | 3 3 3 0.75 0.3 | 1.5 1.5 1.5 0.75 0.3 | 15 15 10 0.4 0.2 | 5 5 5 0.4 0.2 | 2.5 2.5 2.5 0.4 0.2 |
*The figures in parentheses are the ratings for the Z-15HW52, Z-15HW78(-B), and Z-15H2(-B).
Also, these models are not rated for AC500V.
The AC ratings for this model are 125 and 250V only.
Micro Switches Type Z-15 (flexible rod type)
Rated voltage(V) | Non-inductive load (A) | Inductive load (A) | |||||||
---|---|---|---|---|---|---|---|---|---|
Resistive Load | Lamp Load | Inductive Load | Motor Load | ||||||
Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | ||
AC 125 250 | 15 15 | twenty one | 1 0.5 | 7 5 | 2.5 1.5 | twenty one | |||
DC 8 14 30 125 250 | 15 15 2 0.4 0.2 | 2 2 2 0.4 0.2 | 1 1 1 0.4 0.2 | 7 7 1 0.03 0.02 | 3 3 1 0.03 0.02 | 1.5 1.5 0.5 0.03 0.02 | |||
Micro Switches Model Z-10F
Contact Spacing | Rated voltage(V) | Micro Switches item | |||||||
---|---|---|---|---|---|---|---|---|---|
Non-inductive load (A) | Inductive load (A) | ||||||||
Resistive Load | Lamp Load | Inductive Load | Motor Load | ||||||
Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | Normally closed | Normally open | ||
Micro Switches Series connection | AC 125 250 | 10 10 | 4 2.5 | 2 1.5 | 6 6 | 5 3 | 2.5 1.5 | ||
DC 30 125 250 | 10 1 0.6 | 4 1 0.6 | 2 1 0.6 | 6 0.1 0.05 | 6 0.1 0.05 | 3 0.1 0.05 | |||
Parallel connection | AC 125 250 | 6 6 | 3 2.5 | 1.5 1.25 | 4 4 | 4 2 | twenty one | ||
DC 30 125 250 | 6 0.6 0.3 | 4 0.6 0.3 | 2 0.6 0.3 | 4 0.1 0.05 | 6 0.1 0.05 | 3 0.1 0.05 |
Micro Switches Model Z-01H
Rated voltage(V) | Resistive Load (A) | ||
---|---|---|---|
Normally closed | Normally open | ||
AC | 125 | 0.1 | |
DC | 8 14 30 | 0.1 0.1 0.1 |
Note 1. The above values indicate steady-state current.
Note 2. An inductive load is one with a power factor of 0.4 or more (AC) and a time constant of 7 ms or less (DC).
Note 3. A lamp load is one with a 10 times inrush current.
Note 4. A motor load is one with a 6 times inrush current.
Note 5. For reverse action hinge lever types, the ratings for normally closed and normally open are reversed.
Note 6. For molded Micro Switches, the AC ratings are 125 and 250V only.
Note 7. The ratings are for tests conducted under the following conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%RH
(3) Operation frequency: 20 times/min.
Please use within the following range.
Micro Switches Model Z-01H | Micro Switches Model Z-15□, Z-10FY | |
---|---|---|
Minimum Applicable Load | DC5V 1mA | DC5V 160mA |
Micro Switches item | Classification | |||
---|---|---|---|---|
Model Z-15 | Model Z-01H | Model Z-10F | ||
contact | Micro Switches specification | rivet | Single Crossbar | rivet |
Micro Switches Material | silver | Gold alloy | silver | |
Inrush current | Normally closed | Maximum 30A | Maximum 0.1A | Maximum 40A |
Normally open | Maximum 15A | Maximum 0.1A | Maximum 20A |
Use M4 screws for mounting and securely attach using flat washers, spring washers, etc. The tightening torque should be 1.18 to 1.47 N m.
When mounting to a panel, the tightening torque for the actuator's hex nut should be 2.94 to 4.9 N·m.
Catalog information click here
Part Number |
---|
Z-15H2-B |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Detector Shape | Rated Operating Voltage (V) | Lever Shape Type | DC rated operating voltage (V) | Plunger Shape Type | Rod Shape Type | Operating Temperature Range (℃) | Acquired Standards | Protection Structure | Body Material | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Contact Type | Contact Point Type | Contact Material | Mechanical Life (10,000 times) | Mechanical Operation Frequency (times/min or Less) | Rated Conductance Current (A) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Actuator rotational direction | Torque necessary for operation (mN/m) | Movement until operation, PT (°) | Actuator type | Specification of Terminal | Lever mounting position | Format standard | Lead Wire Drawer Direction | Length of lead wire (m) | Movement After the Operation OT (mm) | Operating Position OP (mm) | Cable Length (m) | Contact spacing (mm) | Contact structure/specification | Mounting format | Details Type | Plastic width (mm) | Required force for push side, O.F. (detailed numerical values) (N) | Cable specification | Construction |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
265,226 VND | 1 Piece(s) | Same day | Plunger Type | 125 ~ 250 | - | 8 ~ 250 | Top Plunger | - | -25~80 | UL / CSA | IP00 | [Resin] Thermosetting Resin | ~3 | 0.3 | - | Rivet | Pure Silver | 1000 | 240 | 10 | - | - | - | - | - | - | Pin push button type | Screw clamp terminal (internally toothed washer) | - | - | - | - | 0.1 | 15.9 | - | 0.2 | - | - | - | - | 1.96~2.50 | - | - |
Loading...Tải…
Current type | AC/DC |
---|
Please check the type/dimensions/specifications of the part Z-15H2-B in the General-purpose Basic Switch [Z] series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần Z-15H2-B trong chuỗi General-purpose Basic Switch [Z].
Part Number |
---|
Z-01HD55-B |
Z-01HDA55-B5V |
Z-01HK355 |
Z-15HD |
Z-15HD-B |
Z-15HNJS55-B |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Detector Shape | Rated Operating Voltage (V) | Lever Shape Type | DC rated operating voltage (V) | Plunger Shape Type | Rod Shape Type | Operating Temperature Range (℃) | Acquired Standards | Protection Structure | Body Material | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Contact Type | Contact Point Type | Contact Material | Mechanical Life (10,000 times) | Mechanical Operation Frequency (times/min or Less) | Rated Conductance Current (A) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Actuator rotational direction | Torque necessary for operation (mN/m) | Movement until operation, PT (°) | Actuator type | Specification of Terminal | Lever mounting position | Format standard | Lead Wire Drawer Direction | Length of lead wire (m) | Movement After the Operation OT (mm) | Operating Position OP (mm) | Cable Length (m) | Contact spacing (mm) | Contact structure/specification | Mounting format | Details Type | Plastic width (mm) | Required force for push side, O.F. (detailed numerical values) (N) | Cable specification | Construction |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
445,450 VND | 1 Piece(s) | Same day | Plunger Type | 125 | - | 8 ~ 30 | Top Plunger | - | -15~80 | UL / CSA | IP62 | [Resin] Thermosetting Resin | ~4 | 1.9 | - | [Crossbar] Crossbar | Gold alloy | 2000 | 240 | 0.1 | 17.45 | 23.9 | 49.2 | - | - | - | Spring short push button type | Screw clamp terminal (internally toothed washer) | - | Drip-proof type (terminal not included) | - | - | 1.6 | 21.5 | - | 0.25 | - | - | - | - | 3.63 | - | - | ||
509,592 VND | 1 Piece(s) | 8 Day(s) or more | Plunger Type | 125 | - | 8 ~ 30 | Top Plunger | - | -25~80 | - | IP62 | - | - | - | - | - | - | 1000 | 240 | 0.1 | - | - | - | - | - | - | Spring short push button type | Screw terminal with terminal protective cover | - | Drip-proof type (including terminal part) | - | - | 1.6 | 21.5 | - | 0.25 | - | - | - | - | - | - | Standard form | ||
501,481 VND | 1 Piece(s) | 77 Day(s) or more | Plunger Type | 125 | - | 8 ~ 30 | Top Plunger | - | -25~80 | - | IP62 | - | - | - | - | - | - | 1000 | 240 | 0.1 | - | - | - | - | - | - | Spring push button type (OP large) | Terminals With Solder | - | Drip-proof type (terminal not included) | - | - | - | - | - | 0.25 | - | - | - | - | - | - | Standard form | ||
274,720 VND | 1 Piece(s) | Same day | Plunger Type | 125 ~ 250 | - | 8 ~ 250 | Top Plunger | - | -25~80 | UL / CSA | IP00 | [Resin] Thermosetting Resin | ~3 | 0.3 | - | Rivet | Pure Silver | 2000 | 240 | 15 | - | - | - | - | - | - | Spring short push button type | Terminals With Solder | - | - | - | - | 1.6 | 21.5 | - | 0.25 | - | - | - | - | 1.96~2.79 | - | - | ||
202,800 VND | 1 Piece(s) | Same day | Plunger Type | 125 ~ 250 | - | 8 ~ 250 | Top Plunger | - | -25~80 | UL / CSA | IP00 | [Resin] Thermosetting Resin | ~3 | 0.3 | - | Rivet | Pure Silver | 2000 | 240 | 15 | - | - | - | - | - | - | Spring short push button type | Screw clamp terminal (internally toothed washer) | - | - | - | - | 1.6 | 21.5 | - | 0.25 | - | - | - | - | 1.96~2.79 | - | - | ||
315,000 VND | 1 Piece(s) | Same day | Rod Shape | 125 ~ 250 | - | 8 ~ 250 | - | [Spring + Metal Rod] Steel / wire type | -15~80 | UL / CSA | IP62 | [Resin] Thermosetting Resin | ~1 | 25.0 | - | Rivet | Pure Silver | 100 | 120 | 15 | 17.45 | - | 49.2 | - | - | - | Flexible rod type (OP small) | Screw clamp terminal (internally toothed washer) | - | Drip-proof type (terminal not included) | - | - | - | - | - | 0.25 | - | - | - | - | 0.15 | - | - |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy