(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Loading...Tải…
Detector Shape | Rod Shape | Main Body Size | Small |
---|---|---|---|
Environment | Standard | Plunger Shape Type | - |
Boot Seal | - | Roller Lever Shape Type | - |
Lever Shape Type | - | Rod Shape Type | Variable Metal Rods |
Operating Temperature Range(°C) | -5~65 | Acquired Standards | GB(CCC) |
Protection Structure | IP65 | Force Required for Push Side O.F.(N) | 7.35 |
Show MoreXem thêm | |||
Motion to Switching P.T.(mm) | - | Angle to Switching P.T(deg) | 20 |
Contact Type | 2-circuit Double-break | Mechanical Life(10,000 times) | 1000 |
Mechanical Operation Frequency(times/min or Less) | 120 | Rated Operating Voltage(V) | AC240/250V |
Rated Conductance Current(A) | 5 | Main Body External Dimension, Width W(mm) | - |
Main Body External Dimension, Height H(mm) | - | Main Body External Dimension, Length L(mm) | 60.6 |
Specification of Terminal | Ground terminal / rear M5 with tapping | - | - |
Show LessHiện ít hơn |
Japanese Only
Loading...Tải…
Loading...Tải…
Loading...Tải…
Loading...Tải…
Loading...Tải…
Detector Shape | Rod Shape | Main Body Size | Small |
---|---|---|---|
Environment | Standard | Plunger Shape Type | - |
Boot Seal | - | Roller Lever Shape Type | - |
Lever Shape Type | - | Rod Shape Type | Variable Metal Rods |
Operating Temperature Range(°C) | -5~65 | Acquired Standards | GB(CCC) |
Protection Structure | IP65 | Force Required for Push Side O.F.(N) | 7.35 |
Show MoreXem thêm | |||
Motion to Switching P.T.(mm) | - | Angle to Switching P.T(deg) | 20 |
Contact Type | 2-circuit Double-break | Mechanical Life(10,000 times) | 1000 |
Mechanical Operation Frequency(times/min or Less) | 120 | Rated Operating Voltage(V) | AC240/250V |
Rated Conductance Current(A) | 5 | Main Body External Dimension, Width W(mm) | - |
Main Body External Dimension, Height H(mm) | - | Main Body External Dimension, Length L(mm) | 60.6 |
Specification of Terminal | Ground terminal / rear M5 with tapping | - | - |
Show LessHiện ít hơn |
Loading...Tải…
Detector Shape | Rod Shape | Main Body Size | Small |
---|---|---|---|
Environment | Standard | Plunger Shape Type | - |
Boot Seal | - | Roller Lever Shape Type | - |
Lever Shape Type | - | Rod Shape Type | Variable Metal Rods |
Operating Temperature Range(°C) | -5~65 | Acquired Standards | GB(CCC) |
Protection Structure | IP65 | Force Required for Push Side O.F.(N) | 7.35 |
Show MoreXem thêm | |||
Motion to Switching P.T.(mm) | - | Angle to Switching P.T(deg) | 20 |
Contact Type | 2-circuit Double-break | Mechanical Life(10,000 times) | 1000 |
Mechanical Operation Frequency(times/min or Less) | 120 | Rated Operating Voltage(V) | AC240/250V |
Rated Conductance Current(A) | 5 | Main Body External Dimension, Width W(mm) | - |
Main Body External Dimension, Height H(mm) | - | Main Body External Dimension, Length L(mm) | 60.6 |
Specification of Terminal | Ground terminal / rear M5 with tapping | - | - |
Show LessHiện ít hơn |
Compact limit switch with high practicability in low price. For head, box and cover, an uneven interlocking method is used and thus robustness is maintained.
Loading...Tải…
Detector Shape | Rod Shape | Main Body Size | Small |
---|---|---|---|
Environment | Standard | Plunger Shape Type | - |
Boot Seal | - | Roller Lever Shape Type | - |
Lever Shape Type | - | Rod Shape Type | Variable Metal Rods |
Operating Temperature Range(°C) | -5~65 | Acquired Standards | GB(CCC) |
Protection Structure | IP65 | Force Required for Push Side O.F.(N) | 7.35 |
Show MoreXem thêm | |||
Motion to Switching P.T.(mm) | - | Angle to Switching P.T(deg) | 20 |
Contact Type | 2-circuit Double-break | Mechanical Life(10,000 times) | 1000 |
Mechanical Operation Frequency(times/min or Less) | 120 | Rated Operating Voltage(V) | AC240/250V |
Rated Conductance Current(A) | 5 | Main Body External Dimension, Width W(mm) | - |
Main Body External Dimension, Height H(mm) | - | Main Body External Dimension, Length L(mm) | 60.6 |
Specification of Terminal | Ground terminal / rear M5 with tapping | - | - |
Show LessHiện ít hơn |
Japanese Only
Loading...Tải…
Detector Shape | Rod Shape | Main Body Size | Small |
---|---|---|---|
Environment | Standard | Plunger Shape Type | - |
Boot Seal | - | Roller Lever Shape Type | - |
Lever Shape Type | - | Rod Shape Type | Variable Metal Rods |
Operating Temperature Range(°C) | -5~65 | Acquired Standards | GB(CCC) |
Protection Structure | IP65 | Force Required for Push Side O.F.(N) | 7.35 |
Show MoreXem thêm | |||
Motion to Switching P.T.(mm) | - | Angle to Switching P.T(deg) | 20 |
Contact Type | 2-circuit Double-break | Mechanical Life(10,000 times) | 1000 |
Mechanical Operation Frequency(times/min or Less) | 120 | Rated Operating Voltage(V) | AC240/250V |
Rated Conductance Current(A) | 5 | Main Body External Dimension, Width W(mm) | - |
Main Body External Dimension, Height H(mm) | - | Main Body External Dimension, Length L(mm) | 60.6 |
Specification of Terminal | Ground terminal / rear M5 with tapping | - | - |
Show LessHiện ít hơn |
Note: In the above dimensional diagrams for each model, the dimensional tolerance for all unspecified parts is ±0.4 mm.
protective structure of Limit Switch | IP65 | |
---|---|---|
Durability* | Mechanical | Over 10 million times (depending on certain conditions) |
Electrical | See electrical endurance curves. | |
Allowable Operating Speed | 5mm~0.5m/s | |
Allowable operating frequency | mechanical | 120 times/min |
Electrical | 30 times/min | |
Insulation resistance | 100MΩ or more (at DC500V mega) | |
Contact resistance | 25mΩ or less (initial value) | |
Voltage | Between same-polarity terminals | AC1,000V 50/60Hz 1min |
Between live metal parts and earth | AC1,500V 50/60Hz 1min | |
Each terminal and non-current-carrying metal part | AC1,500V 50/60Hz 1min | |
Rated Frequency | 50/60Hz | |
vibration | malfunction | 10~55Hz 複振幅1.5mm |
impact | Durability | Max. 1,000m/s2 |
malfunction | Max. 300m/s2 | |
Ambient temperature | -5 to +65℃ (but do not freeze) | |
Ambient humidity | 35~95%RH | |
mass | Approximately 130 to 190g |
Note 1. The above values are initial values of Limit Switch.
Note 2. The above values may differ depending on the model.
*The durability values are for an ambient temperature of 5 to 35°C and an ambient humidity of 40 to 70% RH.
Part Number |
---|
HL-5050G |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Detector Shape | Plunger Shape Type | Boot Seal | Roller Lever Shape Type | Lever Shape Type | Rod Shape Type | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Angle to Switching P.T (deg) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Specification of Terminal |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1,040,381 VND | 1 Piece(s) | Same day | Rod Shape | - | - | - | - | Variable Metal Rods | 7.35 | - | 20 | - | - | Ground terminal / rear M5 with tapping |
Part Number |
---|
Main Body Size | Small | Environment | Standard | Operating Temperature Range(°C) | -5::65 |
---|---|---|---|---|---|
Acquired Standards | GB(CCC) | Protection Structure | IP65 | Contact Type | 2-circuit Double-break |
Mechanical Life(10,000 times) | 1000 | Mechanical Operation Frequency(times/min or Less) | 120 | Rated Operating Voltage(V) | AC240/250V |
Rated Conductance Current(A) | 5 | Main Body External Dimension, Length L(mm) | 60.6 |
Please check the type/dimensions/specifications of the part HL-5050G in the Small Limit Switch [HL-5000] series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần HL-5050G trong chuỗi Small Limit Switch [HL-5000].
Part Number |
---|
HL-5030 |
HL-5030G |
HL-5050 |
HL-5100 |
HL-5100G |
HL-5200 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Detector Shape | Plunger Shape Type | Boot Seal | Roller Lever Shape Type | Lever Shape Type | Rod Shape Type | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Angle to Switching P.T (deg) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Specification of Terminal |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
964,102 VND | 1 Piece(s) | Same day | Roller Lever Type (rotation) | - | - | Variable Roller Levers | - | - | 7.35 | - | 20 | 34 | 33 | Ground terminal not included | ||
803,418 VND | 1 Piece(s) | Same day | Roller Lever Type (rotation) | - | - | Variable Roller Levers | Lever | - | 7.35 | - | 20 | - | - | Ground terminal / rear M5 with tapping | ||
767,711 VND | 1 Piece(s) | Same day | Rod Shape | - | - | - | - | Variable Metal Rods | 7.35 | - | 20 | 34 | 33 | Ground terminal not included | ||
843,908 VND | 1 Piece(s) | 6 Day(s) or more | Plunger Type | [Top Plunger] Seal, Plungers | Presence | - | - | - | 8.83 | 1.5 | - | 34 | 33 | Ground terminal not included | ||
792,443 VND | 1 Piece(s) | 6 Day(s) or more | Plunger Type | [Top Plunger] Seal, Plungers | - | - | - | - | 8.83 | 1.5 | - | - | - | Ground terminal / rear M5 with tapping | ||
685,584 VND | 1 Piece(s) | 11 Day(s) | Plunger Type | [Roller Plungers] Seal, Roller Plungers | Presence | - | - | - | 8.83 | 1.5 | - | 34 | 33 | Ground terminal not included |
Part Number |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy