(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Plunger Shape Type
- Top Plunger
- Roller Plungers
- Top Plunger
-
Lever Shape Type
- The Horizontal one way roller
- Arm Lever
-
Rod Shape Type
- Spring + Metal Rod
- Spring + Resin Rod
- Spring + Metal Rod
-
Contact Point Type
- Rivet
-
Rated Operating Voltage(V)
- DC125V
- DC250V
- AC100/125V
- AC240/250V
-
Indicator Light
- AC/DC10 - 115V drive type (orange LED)
-
Specification of Terminal
-
Release key type
- General type key (resin)
-
Lock / release system
-
Built-in Switch Specification
- 1NC/1NO contact (MBB) (slow-action)
- 1NC/1NO contact (slow-action)
- 1NC/1NO contact (slow action)
- 1NC/1NO contact (snap-action)
- 1NC/1NO contact (snap action)
- 2NC contact (slow-action)
- 2NC contact (slow action)
- 2NC contact (snap-action)
- 2NC contact (snap action)
- 2NC/1NO contact (MBB) (slow-action)
- 2NC/1NO contact (MBB) (slow action)
- 2NC/1NO contact (slow-action)
- 2NC/1NO contact (slow action)
- 3NC contact (slow action)
-
AC Rated Voltage
-
DC Rated Voltage
-
type
- D4N
- D4N-□R
-
Detector Shape
- Plunger Type
- Roller Lever Type (rotation)
- Rod Shape
- Roller lever type
-
Main Body Size
- Standard
- Small
-
Environment
- Standard
- Cold Resistance
-
Roller Lever Shape Type
- Standard
- Fork Lever Lock
- Variable Roller Levers
-
Force Required for Push Side O.F.(N)
-
Contact Type
- Mutual insulation double-throw
- 2-circuit Double-break
-
Rated Conductance Current(A)
-
Detector element details
- Resin plunger φ6
- Resin roller φ9.5 × 5
- Resin roller φ12.5 × 5
- Metal lever φ17.5 × 6.8, resin roller R20-66
- Metal lever, rubber roller φ50 × 8
- Adjustable roller lever type, form lock type (metal lever, resin roller)
- Cat whisker type
- Fork lever lock type
- One-way action roller arm lever type
- Plunger type
- Resin Rods
- Roller lever
- Roller lever type (metal lever, bearing roller)
- Roller lever type (metal lever, metal roller)
- Roller lever type (metal lever, resin roller)
- Roller lever type (resin lever, resin roller)
- Roller plunger type
- Roller plunger type (resin roller)
- Top plunger type (resin plunger)
- Unidirectional operation roller arm lever type (horizontal operation)
- Unidirectional operation roller arm lever type (vertical operation)
- Variable roller lever
-
Movement After the Operation OT(mm)
-
Operating Position OP(mm)
- 18.2±0.5
- 27±0.8
- 28.2±0.8
- 34±0.5
- 37±0.8
- 44.4±0.8
- 53±0.8
- -
-
Torque necessary for operation, OF(N·m)
- 0
- -
-
Conduit size
-
Details Type
- 1-conduit type, general type
- 1-conduit type, pull-reset type
- 1 Conduit Shape
- 1 Conduit Shape 2 Contact Series
- 1 Conduit Shape 3 Contact, MBB Contact Series
- 2-conduit type, general type
- 2 Conduit Shape 2 Contact Series
- 2 Conduit Shape 3 Contact, MBB Contact Series
- Caster
-
O.D.
- φ6
- φ9.5×5
- φ12.5 × 5
- φ17×6
- φ17.5×6.8
- φ17.5×7
- φ50×8
-
Mounting system
-
Direction of Operation
-
Roller Type
- Resin Roller R19
- Resin Roller R20
- Metal lever / SUS sintered alloy roller R26
- Metal lever / bearing roller R26
- Metal lever / resin roller R26
- Resin lever / resin roller R26
- -
- Metal lever / resin roller, foam lock type
- Metal lever / rubber roller, foam lock type
- Plastic Rollers
- Resin roller, foam lock type
- Rubber roller
-
Contact format
- 1NC/1NO
- 1NC/1NOMBB
- 2NC
- 2NC/1NO
- 2NC/1NO+1NC/1NO
- 2NC/1NO+2NC
- 3NC
-
CADCAD
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 4 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 10 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
- 14 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Small Safety Limit Switch [D4N] (D4N-2225)
![Small Safety Limit Switch [D4N] (D4N-2225)](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_main/v1/p/cn/product/series/221005138046/221005138046_20201112121441.jpg?$product_main$)
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
![Small Safety Limit Switch [D4N]](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/cn/product/series/221005138046/221005138046_20201112121441.jpg?$product_thum$)
![Small Safety Limit Switch [D4N]](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/cn/product/series/221005138046/221005138046_20201112121442.jpg?$product_thum$)
![Small Safety Limit Switch [D4N]](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/cn/product/series/221005138046/221005138046_20201112121443.jpg?$product_thum$)
![Small Safety Limit Switch [D4N]](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/cn/product/series/221005138046/221005138046_20201112121444.jpg?$product_thum$)
![Small Safety Limit Switch [D4N]](http://vn.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005138046_003.jpg?$product_thum$)
![Small Safety Limit Switch [D4N]](http://vn.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005138046_002.jpg?$product_thum$)
![Small Safety Limit Switch [D4N]](http://vn.misumi-ec.com/linked/material/mech/OMR1/PHOTO/221005138046_001.jpg?$product_thum$)
- All
- Sale Items
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 320,050VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
Safety limit switch standards. Enriched products provided globally
Dimensional Drawing of OMRON Limit Switch
1 Conduit Type of Limit Switch
Note: Limit Switch, The dimensional tolerance of all parts not specified in the above dimensional diagrams for each model is ±0.4 mm.
*For the M12 connector, see "1-conduit type, M12 connector type common."
*For information on model numbers other than those listed above, please refer to the digital catalog.
Specification Table of OMRON Limit Switch
Structure of Limit Switch
Performance of Limit Switch
| Protective structure*1 of Limit Switch | IP67 (EN60947-5-1) | |
|---|---|---|
| Durability*2 | Mechanical | Over 1 million times |
| Electrical | 500,000 times or more (AC250V 3A, resistive load)*3 300,000 times or more (AC250V 10A, resistive load) | |
| Allowable Operating Speed | 1 to 500 mm/s (D4N-1A20R) | |
| Allowable operating frequency | Maximum 30 times/min | |
| Contact Resistance | 25mΩ or less | |
| Minimum applicable load*4 | DC5V 1mA resistive load (N level reference value) | |
| Rated insulation voltage (Ui) | 300V | |
| Rated Frequency | 50/60Hz | |
| Electric shock protection class | Class II (double insulated) | |
| Pollution level (usage environment) | Pollution degree 3 (EN60947-5-1) | |
| Impulse withstand voltage (EN60947-5-1) | Between same-polarity terminals | 2.5kV |
| Between different terminals | 4kV | |
| Between each terminal and non-current-carrying metal parts | 6kV | |
| Insulation resistance | 100MΩ or more | |
| Contact Gap | Minimum 2 x 2 mm | |
| vibration | malfunction | 10 to 55Hz, single amplitude 0.75mm |
| impact | Durability | 1,000m/s2 |
| malfunction | 300m/s2 | |
| Conditional Short Circuit Current | 100A (EN60947-5-1) | |
| Rated open thermal current (Ith) | 10A (EN60947-5-1) | |
| Ambient temperature | -30 to +70℃ (but do not freeze) | |
| Ambient humidity | 95% RH or less | |
| mass | Approximately 92g (for D4N-1A20R) | |
Note 1. The above values are initial values of Limit Switch.
2. Once a load has been switched, a load with a smaller capacity cannot be connected to the contact. This
may cause the contact surface to become rough and the contact reliability to be impaired.
*1. This protective structure is based on a test method based on the standard (EN60947-5-1), and the sealing performance under the actual usage environment and conditions should be confirmed in advance.
The switch box body is protected from the intrusion of dust, oil, water, etc., but the operation key insertion port in the head part should not be exposed to cutting chips, oil, water, chemicals,etc., when using the switch. This
may cause early wear, damage, and failure of Limit Switch.
*2. The durability conditions are at an ambient temperature of 5 to 35°C and an ambient humidity of 40 to 70% RH.
*3. Do not apply AC250V 3A to two or more circuits.
*4. This value may change depending on the switching frequency, environmental conditions, reliability level, etc. Please check with the actual load in advance.
| Part Number |
|---|
| D4N-2225 |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Detector Shape | Main Body Size | Environment | Plunger Shape Type | Roller Lever Shape Type | Lever Shape Type | Rod Shape Type | Acquired Standards | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Angle to Switching P.T (deg) | Max. Stroke T.T (mm) | Max. Angle T.T (deg) | Contact Type | Contact Point Type | Mechanical Life (10,000 times) | Rated Operating Voltage (V) | Rated Conductance Current (A) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Lever Length R (mm) | Detector element details | Indicator Light | Movement After the Operation OT (mm) | Operating Position OP (mm) | Torque necessary for operation, OF (N·m) | Conduit size | Specification of Terminal | Details Type | O.D. | Mounting system | Direction of Operation | Roller Type | Contact format | Release key type | Lock / release system | Built-in Switch Specification | AC Rated Voltage | DC Rated Voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
487,000 VND | 1 Piece(s) | 4 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | TUV / UL / GB(CCC) / EN | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC125V / DC250V | 2.5 | 31 | 45 | 82.5 | 26 | Roller lever | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×7 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / SUS sintered alloy roller R26 | 2NC | - | - | - | - | - |
Loading...Tải…
Basic InformationThông tin cơ bản
| Operating Temperature Range(°C) | -30::70 | Protection Structure | IP67 | Mechanical Operation Frequency(times/min or Less) | 30 |
|---|
Please check the type/dimensions/specifications of the part D4N-2225 in the Small Safety Limit Switch [D4N] series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần D4N-2225 trong chuỗi Small Safety Limit Switch [D4N].
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Products like this...
| Part Number |
|---|
| D4N-1126 |
| D4N-112G |
| D4N-112H |
| D4N-222G |
| D4N-2232 |
| D4N-2A20 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Detector Shape | Main Body Size | Environment | Plunger Shape Type | Roller Lever Shape Type | Lever Shape Type | Rod Shape Type | Acquired Standards | Force Required for Push Side O.F. (N) | Motion to Switching P.T. (mm) | Angle to Switching P.T (deg) | Max. Stroke T.T (mm) | Max. Angle T.T (deg) | Contact Type | Contact Point Type | Mechanical Life (10,000 times) | Rated Operating Voltage (V) | Rated Conductance Current (A) | Main Body External Dimension, Width W (mm) | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Lever Length R (mm) | Detector element details | Indicator Light | Movement After the Operation OT (mm) | Operating Position OP (mm) | Torque necessary for operation, OF (N·m) | Conduit size | Specification of Terminal | Details Type | O.D. | Mounting system | Direction of Operation | Roller Type | Contact format | Release key type | Lock / release system | Built-in Switch Specification | AC Rated Voltage | DC Rated Voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
895,093 VND | 1 Piece(s) | 14 Day(s) | Roller lever type | Small | Standard | - | - | - | - | EN / UL / C-UL / CE / GB(CCC) / TUV | - | - | - | - | - | - | - | 1500 | - | - | - | - | - | - | Roller lever type (metal lever, bearing roller) | - | - | - | - | PG13.5 | - | 1-conduit type, general type | - | - | - | - | - | - | - | 1NC/1NO contact (snap action) | 120 / 240 | 125 / 250 | ||
448,000 VND | 1 Piece(s) | Same day | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | EN / UL / GB(CCC) / TUV | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC250V / DC125V | 2.5 | 31 | 45 | 82.5 | 20-66 | Variable roller lever | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / resin roller, foam lock type | 1NC/1NO | - | - | - | - | - | ||
680,968 VND | 1 Piece(s) | 6 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Variable Roller Levers | - | - | EN / UL / GB(CCC) / TUV | 4.5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC250V / DC125V | 2.5 | 31 | 48.2 | 82.5 | 32-66 | Variable roller lever | - | - | - | - | PG13.5 | - | 1 Conduit Shape 2 Contact Series | φ50×8 | Front mounting | Snap action (direct circuit opening operation included) | Metal lever / rubber roller, foam lock type | 1NC/1NO | - | - | - | - | - | ||
485,925 VND | 1 Piece(s) | 24 Day(s) | Roller lever type | Small | Standard | - | - | - | - | EN / UL / C-UL / CE / GB(CCC) / TUV | - | - | - | - | - | - | - | 1500 | - | - | - | - | - | - | Adjustable roller lever type, form lock type (metal lever, resin roller) | - | - | - | - | G1/2 | - | 1-conduit type, general type | - | - | - | - | - | - | - | 2NC contact (snap action) | 120 / 240 | 125 / 250 | ||
380,343 VND | 1 Piece(s) | 7 Day(s) | Plunger Type | Small | Standard | [Roller Plungers] Roller Plunger | - | - | - | EN / UL / C-UL / CE / GB(CCC) / TUV | - | - | - | - | - | - | - | 1500 | - | - | - | - | - | - | Roller plunger type | - | - | - | - | G1/2 | - | 1-conduit type, general type | - | - | - | - | - | - | - | 2NC contact (snap-action) | 120 / 240 | 125 / 250 | ||
697,405 VND | 1 Piece(s) | 6 Day(s) or more | Roller Lever Type (rotation) | Small | Standard | - | Standard | - | - | EN / UL / GB(CCC) / TUV | 5 | - | 18-27 | - | 80 | 2-circuit Double-break | - | 1500 | DC250V / DC125V | 2.5 | 31 | 47 | 82.5 | 26 | Roller lever | - | - | - | - | G1/2 | - | 1 Conduit Shape 2 Contact Series | φ17.5×6.8 | Front mounting | Slow action (direct circuit opening operation included) | Resin lever / resin roller R26 | 1NC/1NO | - | - | - | - | - |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy