(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Detector Shape
- Plunger Type
- Lever Shape (push)
-
Lever Shape Type
- Hinge Lever
- Leaf
- Hinge Lever
-
Plunger Shape Type
- Top Plunger
-
Acquired Standards
- UL
- CSA
-
Contact Type
- Single Pole Double Throw
- Single Pole Normally Close
- Single Pole Normally Open
-
Current type
-
Actuator rotational direction
-
Torque necessary for operation(mN/m)
-
Movement until operation, PT(°)
-
Actuator type
- Hinge, Earl, Lever type
- Hinge, lever type
- Hinge, long lever type
- Hinge, roller, lever type
- Long leaf lever type
- Pin push button type
-
Specification of Terminal
-
Lever mounting position
-
Format standard
-
Lead Wire Drawer Direction
-
Length of lead wire(m)
-
Movement After the Operation OT(mm)
-
Operating Position OP(mm)
- 6.4±0.2
- 7.5±0.5
- 9.3±0.8
- 10.4±0.2
- 11.2±0.5
- 14±0.6
- 15.4±1.5
-
Cable Length(m)
-
Contact structure/specification
-
Mounting format
- M3-screw mounting
- -
- Long post on left
- Screw mounting
-
Details Type
-
Required force for push side, O.F. (detailed numerical values)(N)
- 0.75
-
type
- D2HW
-
CADCAD
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 4 Day(s) or Less
- 6 Day(s) or Less
- 56 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Sealed Ultra Subminiature Basic Switch [D2HW]
![Sealed Ultra Subminiature Basic Switch [D2HW]](http://vn.misumi-ec.com/linked/material/mech/OMR1/PHOTO/OMR1_221005138125_1.jpg?$product_main$)
- Until 31/03/2025
- All
- Sale Items
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 35,000VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
[Features]
· Long stroke type enabling ON/OFF securely by using industry's smallest size.
· Contribute to compact mechanism product with conventional volume ratio of 78% in case of body dimensions.
· Long stroke specification easy to use also without lever (OT reference place: 1.4 mm).
· Eliminates substances harmful to environment and lead wire type is also lead-free.
Dimensional Drawing of OMRON Micro Switches
![Sealed ultra-miniature basic switch [D2HW] Dimensions](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_001_20230801115855.jpg)
Micro Switches Model D2HW-□20□□
![Sealed ultra-miniature basic switch [D2HW] Dimensions 2](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_002_20230801115855.jpg)
Micro Switches Model D2HW-□21□□
![Sealed ultra-miniature basic switch [D2HW] External view 3](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_003_20230801115855.jpg)
Micro Switches Model D2HW-□22□□
![Sealed ultra-miniature basic switch [D2HW] Dimensions 4](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_004_20230801115855.jpg)
Micro Switches Model D2HW-□23□□
![Sealed ultra-miniature basic switch [D2HW] Outline drawing 5](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_005_20230801115855.jpg)
*UL/cUL certified products are UL certified wires (AWG24, UL1007).
Micro Switches Model D2HW-□28□□
Note 1. The dimensional tolerance of the Micro Switches all unspecified parts in the above external dimensions is ±0.2 mm.
Note 2. The operating characteristics are for operation in the A direction.
Specification Table of OMRON Micro Switches
■ Micro Switches Performance
| Allowable Operating Speed | 1mm to 500mm/s (for pin push button type) | |
|---|---|---|
| Allowable operating frequency | 30 times/min | |
| Micro Switches Insulation resistance | 100MΩ or more (DC500V insulation resistance tester) | |
| Contact resistance (initial value) | Terminal Type | 100mΩ or less |
| Lead Wire Type | 150mΩ or less | |
| Withstand voltage | Between same-polarity terminals | AC600V 50/60Hz 1min |
| Between live metal parts and earth | AC1,500V 50/60Hz 1min | |
| Between each terminal and non-current-carrying metal parts | AC1,500V 50/60Hz 1min | |
| Vibration *1 | malfunction | Frequency: 10 to 55 Hz, Double amplitude: 1.5 mm |
| Impact *1 | Durability | Up to 1,000m/s2 |
| malfunction | Maximum 300m/s2 | |
| Durability | Micro Switches Mechanical | Over 1 million times (30 times/min) |
| Micro Switches Electrical | Over 100,000 times (20 times/min) | |
| Protective structure | Terminal Type | IEC IP67 (excluding terminals) |
| Lead Wire Type | IEC IP67 | |
| Operating temperature range | -40 to +85℃ 60% RH or less (but no freezing or condensation) | |
| Operating humidity range | 95% RH or less (at +5 to +35°C) | |
| mass | Approx. 0.7g (for terminal type pin push button) | |
Note: The above are initial values.
- *1. For pin Micro Switches, the values are for the free position and full travel position, and for lever types, the values are for the full travel position. The contacts makeor break within 1 ms.
■ Contact specifications
| Micro Switches contact | Micro Switches specification | Micro Switches Crossbar |
|---|---|---|
| Material | Gold alloy | |
| Interval (standard value) | 0.5mm | |
| Minimum applicable load (reference value) | DC5V 1mA | |
■ Micro Switches Contact specifications
![Sealed ultra-miniature basic switch [D2HW] Contact specifications](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_007_20230801115855.jpg)
Micro Switches 1a type (normally open type, with lead wire only)
( ) indicates lead wire color
■ Micro Switches Rating
| Micro Switches Rated voltage | Resistive Load |
|---|---|
| AC125V | 0.1A |
| DC12V | 2A |
| DC24V | 1A |
| DC42V | 0.5A |
Note: The above ratings were tested under the following Micro Switches conditions:
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5% RH
(3) Operation frequency: 30 times/min.
■ Safety standard certification rating
| Rated voltage | Micro Switches Model D2HW |
|---|---|
| Resistive Load | |
| AC100V | 0.1A |
| DC12V | 2A |
| DC24V | 1A |
| DC42V | 0.5A |
UL (UL61058-1/cUL C22.2 No.61058-1)
■Micro Switches Type
| Micro Switches Model number | Actuator | Terminal Specifications | Contact Specifications | kinds |
|---|---|---|---|---|
| D2HW-C203M | Micro Switches type | Soldered lead wire attached, bottom | 1a | M3 screw mounting |
| D2HW-C203MR | Soldered lead wire, right side | |||
| D2HW-C213MR | Hinge/Lever Type | |||
| D2HW-C223MR | Hinge/Long Lever Type | |||
| D2HW-C233M | Hinge/R lever type | Soldered lead wire attached, bottom | ||
| D2HW-C233MR | Soldered lead wire, right side | |||
| Micro Switches D2HW-C283M | Long leaf lever type | Soldered lead wire attached, bottom |
Note 1. The length of the standard lead wire (AVSS 0.5) of the lead wire type in the table above is 30 cm.
Note 2. For UL/cUL certified products, "S" is added to the end of the model specification. The lead wire type is UL certified wire (AWG24, UL1007).
■ Mounting hole dimensions of Micro Switches (reference)
![Seal-type ultra-miniature basic switch [D2HW] Product specifications 4](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_009_20230801115855.jpg)
■ Micro Switches type/shape
![Seal-type ultra-miniature basic switch [D2HW] Product specifications 3](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_008_20230801115855.jpg)
With lead wire (right-side type) / With lead wire (bottom-side type)
■Operation characteristics of Micro Switches
| Micro Switches format | Model D2HW-□20□□ | Model D2HW-□21□□ | Model D2HW-□22□□ | Model D2HW-□23□□ | Model D2HW-□28□□ |
|---|---|---|---|---|---|
| Operating force OF max. | 0.75N | 0.75N | 0.5N | 0.65N | 0.9N |
| Return force RF min | 0.10N | 0.07N | 0.03N | 0.05N | 0.05N |
| Movement after the action OT | 1.4mm (reference value) | 1.6mm (reference value) | 2.5mm (reference value) | 1.9mm (reference value) | 2.8mm (reference value) |
| Differential movement MD Max. | 0.25mm | 0.5mm | 0.8mm | 0.5mm | 0.7mm |
| Free position FP max | 7.2mm | 8.8mm | 11.5mm | 12.5mm | 19mm |
| Operating position OP | 6.4±0.2mm | 7.5±0.5mm | 9.3±0.8mm | 11.2±0.5mm | 15.4±1.5mm |
| Operating limit position TTP Max. | 5.1mm | 6mm | 7mm | 9.5mm | 12.8mm |
Selection Support Information of OMRON Micro Switches
![Sealed ultra-miniature basic switch [D2HW] Selection support](http://th.misumi-ec.com/en/linked/vitem/mech/OMR1/221005138125/img/221005138125_006_20230801115855.jpg)
Cautions and Prohibitions of OMRON Micro Switches
OMRON Micro Switches Safety Precautions
●Micro Switches Protection structure
- The Micro Switches, Do not use underwater.
Lead wire types meet the test conditions for the following standards, but these tests are to check the ingress of water after leaving them underwater for a certain period of time, and are not to open or close the switch underwater.
JIS C0920: Degrees of protection provided by enclosures for electrical equipment (IP Code)
IEC 60529: Degrees of protection provided by enclosures (IP Code)
Protection class: IP67 (checks the ingress of water after leaving the Micro Switches underwater for 30 minutes at a depth of 1m) - Please note that constant water droplets on the cover, opening and closing the cover with water droplets on it, or sudden temperature changes can cause water to get inside the cover due to breathing.
- Avoid contact with oil or chemicals
as this may cause the materials used to change or deteriorate. - Avoid using the product of Micro Switches in an environment where silicone adhesives, oil, grease, etc. are present, as this may result in poor contact due to the generation of silicone oxide.
●Micro Switches About soldering
When soldering the lead wire to the terminal, wrap the conductor around the terminal hole before soldering. As a guideline, soldering should be done within 3 seconds with a soldering iron tip temperature of 300°C or less, and noexternal force should be applied for 1 minute after soldering. Working at excessive temperatures or heating for long periods of time can cause deterioration of the Micro Switches's characteristics. When performing automatic soldering, solder at260°C or less for 5 seconds or less. Make sure that the flux and solder liquid level do not exceed the level of the board.
● Cam/Dog Operation
- When operating with a cam or dog, the operating speed, operating frequency, amount the actuator is pressed, and the material and shape of the cam or dog will affect the durability of the Micro Switches, so please check the actual product inadvance.
OMRON Micro Switches Usage Notes
Regarding installation
- Always turn the power OFF when installing or removing the Micro Switches, performing wiring work, or performing maintenance and inspection. To avoid the risk of electric shock or burning.
- For M3 screw mounting types, use M3 screws and flat washers, spring washers, etc. to mount firmly. The tightening torque should be 0.27 to 0.29 N m. Tightening beyond the specified torque can cause deterioration of the seal and damage the product.
●About the control settings
Please select a material for the operating body that has low friction resistance. Also, make sure that the operating body is shaped so that it does not interfere with the seal rubber. This can cause damage to the Micro Switches anddeterioration of the seal.
Micro Switches Handling
Please handle the switch with care not to tear the rubber seal on the Micro Switches.
● Regarding lead wire type wiring
Do not apply a load to the lead wires or wire them in a way that causes them to bend directly from the lead wire outlet, as this may cause damage to the switch or deterioration of the seal.
●About use with Micro Switches
Even when using within the operating range, loads that generate inrush or surges may cause a decrease in durability, so insert a contact protection circuit as necessary.
| Part Number |
|---|
| D2HW-A201D |
| D2HW-BL201H |
| D2HW-C201H |
| D2HW-C202MRS |
| D2HW-C203M |
| D2HW-C203MR |
| D2HW-C203MS |
| D2HW-C213MR |
| D2HW-C221H |
| D2HW-C223MR |
| D2HW-C233M |
| D2HW-C233MR |
| D2HW-C241H |
| D2HW-C283M |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Detector Shape | Lever Shape Type | Plunger Shape Type | Acquired Standards | Contact Type | Main Body External Dimension, Height H (mm) | Main Body External Dimension, Length L (mm) | Current type | Actuator rotational direction | Torque necessary for operation (mN/m) | Movement until operation, PT (°) | Actuator type | Specification of Terminal | Lever mounting position | Format standard | Lead Wire Drawer Direction | Length of lead wire (m) | Movement After the Operation OT (mm) | Operating Position OP (mm) | Cable Length (m) | Contact structure/specification | Mounting format | Details Type | Required force for push side, O.F. (detailed numerical values) (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
56,458 VND | 1 Piece(s) | Same day | Plunger Type | - | Top Plunger | UL / CSA | Single Pole Double Throw | 7 | - | - | - | 750 | - | Pin push button type | Straight terminal for printed circuit boards | - | - | - | - | 1.4 | 10.4±0.2 | - | 1c | - | - | 0.75 | ||
48,646 VND | 1 Piece(s) | 56 Day(s) | Plunger Type | - | Top Plunger | - | Single Pole Double Throw | 6.5 | 13.3 | - | - | 750 | - | Pin push button type | Terminals With Solder | - | - | - | - | 1.4 | 6.4±0.2 | - | 1c | Long post on left | - | - | ||
35,000 VND | 1 Piece(s) | Same day | Plunger Type | - | Top Plunger | UL / CSA | Single Pole Double Throw | 7 | - | - | - | 750 | - | Pin push button type | Soldering lead wire type | - | - | - | - | 1.4 | 10.4±0.2 | - | 1c | Screw mounting | - | 0.75 | ||
83,128 VND | 1 Piece(s) | Same day | Plunger Type | - | Top Plunger | UL | Single Pole Normally Close | 6.5 | 18.5 | - | - | 750 | - | Pin push button type | With Lead Wire (right lead) | - | - | - | - | 1.4 | 6.4±0.2 | - | 1b | M3-screw mounting | - | - | ||
70,080 VND | 1 Piece(s) | 4 Day(s) or more | Plunger Type | - | Top Plunger | - | Single Pole Normally Open | 6.5 | 18.5 | - | - | 750 | - | Pin push button type | With Lead Wire (Downwards) | - | - | - | - | 1.4 | 6.4±0.2 | - | 1a | M3-screw mounting | - | - | ||
90,363 VND | 1 Piece(s) | 6 Day(s) | Plunger Type | - | Top Plunger | - | Single Pole Normally Open | 6.5 | 18.5 | - | - | 750 | - | Pin push button type | With Lead Wire (right lead) | - | - | - | - | 1.4 | 6.4±0.2 | - | 1a | M3-screw mounting | - | - | ||
83,128 VND | 1 Piece(s) | Same day | Plunger Type | - | Top Plunger | - | Single Pole Normally Open | 6.5 | 18.5 | - | - | 750 | - | Pin push button type | With Lead Wire (Downwards) | - | - | - | - | 1.4 | 6.4±0.2 | - | 1a | M3-screw mounting | - | - | ||
85,121 VND | 1 Piece(s) | Same day | Lever Shape (push) | [Hinge Lever] Hinge Lever | - | - | Single Pole Normally Open | 6.5 | 18.5 | - | - | 750 | - | Hinge, lever type | With Lead Wire (right lead) | - | - | - | - | 1.6 | 7.5±0.5 | - | 1a | M3-screw mounting | - | - | ||
55,818 VND | 1 Piece(s) | Same day | Lever Shape (push) | [Hinge Lever] Hinge Lever | - | - | Single Pole Double Throw | 6.5 | 18.5 | - | - | 500 | - | Hinge, long lever type | Terminals With Solder | - | - | - | - | 2.5 | 9.3±0.8 | - | 1c | M3-screw mounting | - | - | ||
85,121 VND 46,817 VND | 1 Piece(s) | Same day | Lever Shape (push) | [Hinge Lever] Hinge Lever | - | - | Single Pole Normally Open | 6.5 | 18.5 | - | - | 500 | - | Hinge, long lever type | With Lead Wire (right lead) | - | - | - | - | 2.5 | 9.3±0.8 | - | 1a | M3-screw mounting | - | - | ||
85,121 VND | 1 Piece(s) | Same day | Lever Shape (push) | [Hinge Lever] Hinge Lever | - | - | Single Pole Normally Open | 6.5 | 18.5 | - | - | 650 | - | Hinge, Earl, Lever type | With Lead Wire (Downwards) | - | - | - | - | 1.9 | 11.2±0.5 | - | 1a | M3-screw mounting | - | - | ||
85,121 VND 49,370 VND | 1 Piece(s) | Same day | Lever Shape (push) | [Hinge Lever] Hinge Lever | - | - | Single Pole Normally Open | 6.5 | 18.5 | - | - | 650 | - | Hinge, Earl, Lever type | With Lead Wire (right lead) | - | - | - | - | 1.9 | 11.2±0.5 | - | 1a | M3-screw mounting | - | - | ||
67,770 VND | 1 Piece(s) | Same day | Lever Shape (push) | [Hinge Lever] Hinge Lever | - | - | Single Pole Double Throw | 6.5 | 18.5 | - | - | 650 | - | Hinge, roller, lever type | Terminals With Solder | - | - | - | - | 1.9 | 14±0.6 | - | 1c | M3-screw mounting | - | - | ||
85,121 VND 42,561 VND | 1 Piece(s) | Same day | Lever Shape (push) | Leaf | - | - | Single Pole Normally Open | 6.5 | 18.5 | - | - | 900 | - | Long leaf lever type | With Lead Wire (Downwards) | - | - | - | - | 2.8 | 15.4±1.5 | - | 1a | M3-screw mounting | - | - |
Loading...Tải…
Basic InformationThông tin cơ bản
| Rated Operating Voltage(V) | 125 | DC rated operating voltage(V) | 12 / 24 / 42 | Operating Temperature Range(℃) | -40::85 |
|---|---|---|---|---|---|
| Protection Structure | IP67 | Force Required for Push Side O.F.(N) | ~1 | Contact Point Type | Crossbar |
| Contact Material | Gold alloy | Mechanical Life(10,000 times) | 100 | Mechanical Operation Frequency(times/min or Less) | 30 |
| Rated Conductance Current(A) | 2 | Main Body External Dimension, Width W(mm) | 5.3 | Contact spacing(mm) | 0.5 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy