(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Outer Diameter D(Ø)
-
Width C(mm)
-
Roller Type
- Spherical Outer Ring
- Cylindrical Outer Ring
-
Cam follower stud screw(mm)
-
Material
- Carbon Steel
- Stainless Steel
-
Rolling Guide Method
- With Gage
- Total roller type
-
Cam Follower: Stud Screw (Fine Thread)(mm)
-
Allowable Rotational Speed(rpm)
-
Sealing Structure
- No Seal
- With Seal
- With seal
-
Track Load Capacity(kN)
-
type
- CF-AB
- CF-M-AB
- CF-MR-AB
- CF-R-AB
- CF-V-AB
- CF-VM-AB
- CF-VMR-AB
- CF-VR-AB
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- Same day
- 6 Day(s) or Less
- 8 Day(s) or Less
- 10 Day(s) or Less
- 13 Day(s) or Less
- 23 Day(s) or Less
- 24 Day(s) or Less
- 26 Day(s) or Less
- 35 Day(s) or Less
- 45 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Cam Follower CF-AB Model
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 490,800VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
(i)
Caution
thận trọng
- Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.
Similar Products
Product DetailProduct Description
Compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and dedicated machines.
[Features]
・ CF-AB model comes with hex sockets at both ends of the stud and grease fitting for lubrication in the back. Can be installed and refilled from both directions.
Drawing
Product Specifications
| Optional specifications | Symbol | |
|---|---|---|
| Guidance method of the roller | With cage | No symbol |
| Full rollers | V | |
| Materials | Carbon steel | No symbol |
| Stainless steel | M | |
| Seal | No Seal | No symbol |
| With seal | UU | |
| Outer ring shape | Cylindrical Outer Ring | No symbol |
| Spherical Outer Ring | R | |
Standards Table
| Stud diameter d | Part number | Main dimensions | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Outer Diameter D | Outer ring width C | Thread G | G1 | B | Overall length B1 | B2 | B3 | C1 | d2 | H | r smin | Shoulder dimensions f (Minimum) | ||
| 12 | CF 12-AB | 30 | 14 | M12 × 1.5 | 13 | 15 | 40 | 25 | 6 | 0.6 | 3 | 6 | 0.6 | 20 |
| 12 | CF 12-1-AB | 32 | 14 | M12 × 1.5 | 13 | 15 | 40 | 25 | 6 | 0.6 | 3 | 6 | 0.6 | 20 |
| 16 | CF 16-AB | 35 | 18 | M16 × 1.5 | 17 | 19.5 | 52 | 32.5 | 8 | 0.8 | 3 | 6 | 0.6 | 24 |
| 18 | CF 18-AB | 40 | 20 | M18 × 1.5 | 19 | 21.5 | 58 | 36.5 | 8 | 0.8 | 3 | 6 | 1 | 26 |
| 20 | CF 20-AB | 52 | 24 | M20 × 1.5 | 21 | 25.5 | 66 | 40.5 | 9 | 0.8 | 4 | 8 | 1 | 36 |
| 20 | CF 20-1-AB | 47 | 24 | M20 × 1.5 | 21 | 25.5 | 66 | 40.5 | 9 | 0.8 | 4 | 8 | 1 | 36 |
| 24 | CF 24-AB | 62 | 29 | M24 × 1.5 | 25 | 30.5 | 80 | 49.5 | 11 | 0.8 | 4 | 8 | 1 | 40 |
| 24 | CF 24-1-AB | 72 | 29 | M24 × 1.5 | 25 | 30.5 | 80 | 49.5 | 11 | 0.8 | 4 | 8 | 1 | 40 |
| 30 | CF 30-AB | 80 | 35 | M30 × 1.5 | 32 | 37 | 100 | 63 | 15 | 1 | 4 | 8 | 1 | 46 |
| 30 | CF 30-1-AB | 85 | 35 | M30 × 1.5 | 32 | 37 | 100 | 63 | 15 | 1 | 4 | 8 | 1 | 46 |
| 30 | CF 30-2-AB | 90 | 35 | M30 × 1.5 | 32 | 37 | 100 | 63 | 15 | 1 | 4 | 8 | 1 | 46 |
| Stud diameter d | Part number | Basic Rated Load | Maximum Allowable Load F0 kN | Track Load Capacity | Limit rotation speed * | Weight | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| With cage | Full rollers | Cylindrical Outer Ring kN | Spherical Outer Ring kN | With cage min^-1 | Full rollers min^-1 | With cage g | Full rollers g | |||||
| C kN | C0 kN | C kN | C0 kN | |||||||||
| 12 | CF 12-AB | 7.87 | 9.79 | 13.4 | 19.8 | 9.37 | 7.06 | 2.45 | 14,000 | 5,800 | 105 | 107 |
| 12 | CF 12-1-AB | 7.87 | 9.79 | 13.4 | 19.8 | 9.37 | 7.45 | 2.74 | 14,000 | 5,800 | 115 | 117 |
| 16 | CF 16-AB | 12 | 18.3 | 20.6 | 37.6 | 17.3 | 11.2 | 3.14 | 10,000 | 4,500 | 205 | 207 |
| 18 | CF 18-AB | 14.7 | 25.2 | 25.2 | 51.3 | 26.1 | 14.4 | 3.72 | 8,500 | 3,800 | 295 | 300 |
| 20 | CF 20-AB | 20.7 | 34.8 | 33.2 | 64.8 | 32.1 | 23.2 | 8.23 | 7,000 | 3,400 | 525 | 530 |
| 20 | CF 20-1-AB | 20.7 | 34.8 | 33.2 | 64.8 | 32.1 | 21 | 7.15 | 7,000 | 3,400 | 450 | 455 |
| 24 | CF 24-AB | 30.6 | 53.2 | 46.7 | 92.9 | 49.5 | 34.2 | 10.5 | 6,500 | 2,900 | 915 | 925 |
| 24 | CF 24-1-AB | 30.6 | 53.2 | 46.7 | 92.9 | 49.5 | 39.8 | 12.9 | 6,500 | 2,900 | 1,150 | 1,160 |
| 30 | CF 30-AB | 45.4 | 87.6 | 67.6 | 145 | 73.7 | 52.6 | 14.9 | 5,000 | 2,300 | 1,880 | 1,890 |
| 30 | CF 30-1-AB | 45.4 | 87.6 | 67.6 | 145 | 73.7 | 56 | 16.1 | 5,000 | 2,300 | 1,950 | 1,960 |
| 30 | CF 30-2-AB | 45.4 | 87.6 | 67.6 | 145 | 73.7 | 59.3 | 17.3 | 5,000 | 2,300 | 2,000 | 2,010 |
*) Please refer to the digital catalog for accuracy standards.
* Compatible with unsealed, grease lubrication. Up to 130% of this value is acceptable for oil lubrication and up to 70% of this value for sealed.
Product features details
Figure 1 Cam Follower CF: UU-A type structure
Structure and features
A cam follower is a compact and highly rigid shaft bearing that has a needle roller built into it and is used as a cam mechanism and a guide roller for linear motion.
Since the outer ring rotates while in direct contact with the mating surface, it is designed to be thick and able to withstand impact loads.
In addition, a needle roller with a precision cage is built into the outer ring to prevent skewing, provide excellent rotation performance, and withstand high-speed rotation.
The outer diameter of the outer ring has a spherical surface and a cylinder, and the spherical outer ring easily absorbs the deviation of the axial center at the time of mounting and helps to alleviate the eccentric load.
It is widely used in automatic machines, cam mechanisms for dedicated machines, various conveyors, conveyors, bookbinding machines, tool changers for machining centers, pallet changers, automatic painting machines, sliding forks in automated warehouses, etc.
Cam follower with grease fitting
In the conventional product, it was necessary to manufacture a jig and attach a plug and grease nipple, but the cam follower CF-AB type with grease fitting has grease nipples on both sides, so it can be used immediately after taking it out of the box.
You can also use a hex key to fix the stud from either the head side or the threaded side, and you can lubricate from both directions. Work efficiency is improved because installation and maintenance can be performed without worrying about the installation space.
Cam follower with thrust ball
In a harsh high-speed cam mechanism, a slight mounting error may cause abnormal wear on the thrust of the cam follower, etc. In such a case, using the cam follower CFN type with thrust ball has a great effect on durability.
The CFN type can receive only the thrust load due to a slight mounting error, but please be careful in designing and assembling so that the thrust component force is not generated as much as possible.
Figure 2
Selection support information
Part number configuration example
*) Please refer to the digital catalog for accessories.
Cautions/Prohibitions
Handling
(1) Do not disassemble each part. It may cause loss of function.
(2) Do not drop or hit the cam follower. It may cause injury or damage. Also, if it is impacted, it may lose its function even if it does not look damaged.
(3) When handling the product, wear protective gloves, safety shoes, etc., as necessary to ensure safety.
Usage precautions
(1) Refer to Digital Catalog Table 1 for the fastening torque when fixing the cam follower, and use a torque wrench or the like to turn the nut to fasten.
(2) Avoid using the product above 80°C. If this temperature is exceeded, the resin and rubber parts may be deformed or damaged.
(3) Be careful not to let foreign objects such as chips and coolant flow in. Excessive tightening will cause damage.
(4) If foreign objects such as chips adheres, clean it and then refill the lubricant.
(5) Since the cam follower supports radial load, avoid using it to apply thrust load.
(6) In the case of slight rocking, it is difficult for an oil film to form on the contact surface between the rolling surface and the rolling element, which may cause fretting, therefore, use grease with excellent fretting resistance. In addition, it is recommended to form an oil film on the rolling surface and rolling element by periodically applying an operation of about 1 rotation.
(7) If the rigidity and accuracy of the mounting member are insufficient, the bearing load will be locally concentrated and the bearing performance will be significantly reduced. Therefore, carefully consider the rigidity and accuracy of the housing and base, and the strength of the fixing bolts.
Lubrication
(1) Lithium soap-based grease No. 2 is used as standard grease for cam followers.
(CFN type uses urea grease No. 2)
Please re-grease as appropriate during use. Avoid relubricating different lubricants. Even if the greases have the same type of thickener, they may adversely affect each other due to different additives, etc. (See Digital Catalog Dust Protection and Lubrication)
(2) Apply lubricant between the cam follower and the rolling surface of the other party before use.
(3) CF, CFH24 and above cam followers (Symbol-A, excluding SUS) with hex socket heads have a structure that prevents grease from leaking from the hex sockets by press-fitting a plug into the through hole that connects the hex socket bottom and the grease hole (refer to ød1, ød2: Digital Catalog Dimensional Diagram).
When greasing, be careful not to remove the plug from the bottom of the hexagonal hole due to excessive pressure.
(4) When using the product in a place where vibration is constantly applied, in a cleanroom, in a vacuum, or in a special environment such as low or high temperature, use grease suitable for the specifications and environment.
(5) The cone penetration of grease changes depending on the temperature. Please note that the sliding resistance of the cam follower also changes depending on the change in cone penetration.
(6) After lubrication, the sliding resistance of the cam follower may increase due to the stirring resistance of the grease. Be sure to run-in and let the grease spread sufficiently before operating the machine.
(7) Even if it has a seal, excess grease may scatter around at the beginning of use or immediately after re-greasing, so wipe it off if necessary.
(8) Grease deteriorates in properties over time and its lubrication performance deteriorates, so it is necessary to check and replenish the grease according to the frequency of use.
(9) The greasing interval varies depending on the usage conditions and operating environment. Please set the final greasing interval and amount on the actual machine.
Storage
Please keep the cam follower indoors in the manufacturer's packaging, avoiding high temperature, low temperature and high humidity.
For products that have been stored for a long period of time, the internal lubricant may have deteriorated over time, so re-lubricate the product before use.
Disposal
Please dispose of the product appropriately as industrial waste.
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Outer Diameter D (Ø) | Width C (mm) | Roller Type | Cam follower stud screw (mm) | Material | Rolling Guide Method | Cam Follower: Stud Screw (Fine Thread) (mm) | Basic Load Rating Dynamic Rating (kN) | Basic Load Rating Static Rating (kN) | Allowable Rotational Speed (rpm) | Sealing Structure | Track Load Capacity (kN) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1,172,093 VND | 1 Piece(s) | 13 Day(s) or more | 10 | 32 | 14 | Spherical Outer Ring | M12 | Stainless Steel | With Gage | - | 7.87 | 9.79 | 14000 | No Seal | 2.74 | ||
1,271,696 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 32 | 14 | Cylindrical Outer Ring | M12 | Stainless Steel | With Gage | - | 7.87 | 9.79 | 14000 | With Seal | 7.45 | ||
1,537,436 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 32 | 14 | Spherical Outer Ring | M12 | Stainless Steel | With Gage | - | 7.87 | 9.79 | 14000 | With Seal | 2.74 | ||
583,613 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 32 | 14 | Spherical Outer Ring | M12 | Carbon Steel | With Gage | - | 7.87 | 9.79 | 14000 | No Seal | 2.74 | ||
631,421 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 32 | 14 | Cylindrical Outer Ring | M12 | Carbon Steel | With Gage | - | 7.87 | 9.79 | 14000 | With Seal | 7.45 | ||
764,726 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 32 | 14 | Spherical Outer Ring | M12 | Carbon Steel | With Gage | - | 7.87 | 9.79 | 14000 | With Seal | 2.74 | ||
705,981 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 32 | 14 | Cylindrical Outer Ring | M12 | Carbon Steel | Total roller type | - | 13.4 | 19.8 | 5800 | With Seal | 7.45 | ||
838,651 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 32 | 14 | Spherical Outer Ring | M12 | Carbon Steel | Total roller type | - | 13.4 | 19.8 | 5800 | With Seal | 7.45 | ||
509,508 VND | 1 Piece(s) | Same day | 10 | 30 | 14 | Cylindrical Outer Ring | M12 | Carbon Steel | With Gage | - | 7.87 | 9.79 | 14000 | No Seal | 7.06 | ||
953,465 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 30 | 14 | Cylindrical Outer Ring | M12 | Stainless Steel | With Gage | - | 7.87 | 9.79 | 14000 | No Seal | 7.06 | ||
1,148,686 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 30 | 14 | Spherical Outer Ring | M12 | Stainless Steel | With Gage | - | 7.87 | 9.79 | 14000 | No Seal | 2.45 | ||
1,225,690 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 30 | 14 | Cylindrical Outer Ring | M12 | Stainless Steel | With Gage | - | 7.87 | 9.79 | 14000 | With Seal | 7.06 | ||
1,462,635 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 30 | 14 | Spherical Outer Ring | M12 | Stainless Steel | With Gage | - | 7.87 | 9.79 | 14000 | With Seal | 2.45 | ||
557,715 VND | 1 Piece(s) | 8 Day(s) | 10 | 30 | 14 | Spherical Outer Ring | M12 | Carbon Steel | With Gage | - | 7.87 | 9.79 | 14000 | No Seal | 2.45 | ||
580,448 VND | 1 Piece(s) | 8 Day(s) | - | 30 | 14 | Cylindrical Outer Ring | M12 | Carbon Steel | With Gage | - | 7.87 | 9.79 | 14000 | With Seal | 7.06 | ||
490,800 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 30 | 14 | Spherical Outer Ring | M12 | Carbon Steel | With Gage | - | 7.87 | 9.79 | 14000 | With Seal | 2.45 | ||
675,005 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 30 | 14 | Cylindrical Outer Ring | M12 | Carbon Steel | Total roller type | - | 13.4 | 19.8 | 5800 | With Seal | 7.06 | ||
553,200 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 30 | 14 | Spherical Outer Ring | M12 | Carbon Steel | Total roller type | - | 13.4 | 19.8 | 5800 | With Seal | 7.06 | ||
553,916 VND | 1 Piece(s) | Same day | 10 | 35 | 18 | Cylindrical Outer Ring | M16 | Carbon Steel | With Gage | - | 12 | 18.6 | 10000 | No Seal | 11.2 | ||
1,374,833 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 35 | 18 | Cylindrical Outer Ring | M16 | Stainless Steel | With Gage | - | 12 | 18.3 | 10000 | No Seal | 11.2 | ||
1,592,366 VND | 1 Piece(s) | 23 Day(s) or more | 10 | 35 | 18 | Spherical Outer Ring | M16 | Stainless Steel | With Gage | - | 12 | 18.6 | 10000 | No Seal | 3.14 | ||
2,015,293 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 35 | 18 | Cylindrical Outer Ring | M16 | Stainless Steel | With Gage | - | 12 | 18.6 | 10000 | With Seal | 11.2 | ||
2,031,416 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 35 | 18 | Spherical Outer Ring | M16 | Stainless Steel | With Gage | - | 12 | 18.6 | 10000 | With Seal | 3.14 | ||
647,895 VND | 1 Piece(s) | Same day | 10 | 35 | 18 | Spherical Outer Ring | M16 | Carbon Steel | With Gage | - | 12 | 18.6 | 10000 | No Seal | 3.14 | ||
679,663 VND | 1 Piece(s) | 8 Day(s) | 10 | 35 | 18 | Cylindrical Outer Ring | M16 | Carbon Steel | With Gage | - | 12 | 18.6 | 10000 | With Seal | 11.2 | ||
801,145 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 35 | 18 | Spherical Outer Ring | M16 | Carbon Steel | With Gage | - | 12 | 18.6 | 10000 | With Seal | 3.14 | ||
738,706 VND | 1 Piece(s) | Same day | 10 | 35 | 18 | Cylindrical Outer Ring | M16 | Carbon Steel | Total roller type | - | 20.6 | 37.6 | 4500 | With Seal | 11.2 | ||
878,836 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 35 | 18 | Spherical Outer Ring | M16 | Carbon Steel | Total roller type | - | 20.6 | 37.6 | 4500 | With Seal | 11.2 | ||
658,693 VND | 1 Piece(s) | Same day | 10 | 40 | 20 | Cylindrical Outer Ring | M18 | Carbon Steel | With Gage | - | 14.7 | 25.2 | 8500 | No Seal | 14.4 | ||
2,405,525 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 40 | 20 | Cylindrical Outer Ring | M18 | Stainless Steel | With Gage | - | 14.7 | 25.2 | 8500 | With Seal | 14.4 | ||
2,431,421 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 40 | 20 | Spherical Outer Ring | M18 | Stainless Steel | With Gage | - | 14.7 | 25.2 | 8500 | With Seal | 3.72 | ||
753,335 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 40 | 20 | Spherical Outer Ring | M18 | Carbon Steel | With Gage | - | 14.7 | 25.2 | 8500 | No Seal | 3.72 | ||
801,145 VND | 1 Piece(s) | Same day | 10 | 40 | 20 | Cylindrical Outer Ring | M18 | Carbon Steel | With Gage | - | 14.7 | 25.2 | 8500 | With Seal | 14.4 | ||
948,955 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 40 | 20 | Spherical Outer Ring | M18 | Carbon Steel | With Gage | - | 14.7 | 25.2 | 8500 | With Seal | 3.72 | ||
847,986 VND | 1 Piece(s) | Same day | 10 | 47 | 24 | Cylindrical Outer Ring | M20 | Carbon Steel | With Gage | - | 20.7 | 34.8 | 7000 | No Seal | 21 | ||
991,016 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 47 | 24 | Spherical Outer Ring | M20 | Carbon Steel | With Gage | - | 20.7 | 34.8 | 7000 | No Seal | 7.15 | ||
1,045,946 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 47 | 24 | Cylindrical Outer Ring | M20 | Carbon Steel | With Gage | - | 20.7 | 34.8 | 7000 | With Seal | 21 | ||
1,256,360 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 47 | 24 | Spherical Outer Ring | M20 | Carbon Steel | With Gage | - | 20.7 | 34.8 | 7000 | With Seal | 7.15 | ||
877,318 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 52 | 24 | Cylindrical Outer Ring | M20 | Carbon Steel | With Gage | - | 20.7 | 34.8 | 7000 | No Seal | 23.2 | ||
3,207,025 VND | 1 Piece(s) | 13 Day(s) or more | - | 52 | 24 | Cylindrical Outer Ring | M20 | Stainless Steel | With Gage | - | 20.7 | 34.8 | 7000 | With Seal | 23.2 | ||
970,871 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 52 | 24 | Spherical Outer Ring | M20 | Carbon Steel | With Gage | - | 20.7 | 34.8 | 7000 | No Seal | 8.23 | ||
1,094,850 VND | 1 Piece(s) | Same day | 10 | 52 | 24 | Cylindrical Outer Ring | M20 | Carbon Steel | With Gage | - | 20.7 | 34.8 | 7000 | With Seal | 23.2 | ||
1,316,368 VND | 1 Piece(s) | 6 Day(s) or more | 10 | 52 | 24 | Spherical Outer Ring | M20 | Carbon Steel | With Gage | - | 20.7 | 34.8 | 7000 | With Seal | 8.23 | ||
1,541,505 VND | 1 Piece(s) | 45 Day(s) or more | - | 72 | 29 | Cylindrical Outer Ring | - | Carbon Steel | With Gage | M24×1.5 | 30.6 | 53.2 | 6500 | With seal | 39.8 |
Loading...Tải…
Basic InformationThông tin cơ bản
| Product Category | Cam Followers | Fastening Methods | With Head Screw Part Hexagonal Hole | Cam Followers Type | Standard |
|---|---|---|---|---|---|
| Size Standard | Metric System | Roller Lining | No | Axis | Presence |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy