(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

LES8LAK-30-6N1

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

type
- LES
ClearTrống
Stroke(mm)
30

50

75

100

125

150
ClearTrống
Max. Transportable Mass Range (Horizontal)(kg)
- 0~2.0
- 2.1~5.0
ClearTrống
Max. Transportable Mass (Horizontal)(kg)
1

3

5
ClearTrống
Max. Transportable Mass Range (Vertical)(kg)
- 0~2.0
- 2.1~5.0
ClearTrống
Max. Transportable Mass (Vertical)(kg)
0.25

0.5

1

1.5

2

2.5

3

4

5
ClearTrống
Drive Method
- Slide Screw
  - Slide Screw + Belt
ClearTrống
Lead(mm)
4

5

8

10

16
ClearTrống
I/O Module
- NPN
- PNP
- CC-Link
- Not Provided
ClearTrống
Table Width W1(mm)
32.2

40.2

60
ClearTrống
Max. Thrust Force Range(N)
- 0~100
- 101~200
ClearTrống
Max. Thrust Force(N)
7.5

10

11

15

20

35

38

55

62

100

180
ClearTrống
Table Length L1(mm)
88.5

88.7

102.3

102.5

130.3

130.5

131.5

131.7

133.5

156.5

156.7

159.5

174.3

174.5

193.5

199.3

199.5

266.5

291.5

316.5
ClearTrống
Operating Environment
- Standard
- Dust Resistant
ClearTrống
Maximum Velocity(mm/sec)
200

400
ClearTrống
Size
- 8
- 16
- 25
ClearTrống
Motor type
- Servo motor (24 V DC)
- Step motor (24‑V DC servo)
ClearTrống
Motor mounting position
- Basic type / R type
- In-line motor type / D type
- Symmetric type / L type
ClearTrống
Motor options
- No options
- With lock
ClearTrống
Mounting support
- Side holder (4 pcs.)
- Without side holder
ClearTrống
Actuator/cable type
Robotic cable (flex-resistant cable)

Standard cable

Without cable
ClearTrống
Actuator cable length(m)
- 1.5
- 3
- 5
- 8
- 10
- 15
- 20
- Without cable
ClearTrống
Controller/driver type
LECP1 (programless type)

LECP6/LECA6 (step data input type)

LECPA (pulse input type)

LECPMJ

Without controller/driver
ClearTrống
I/O cable length / communication plug(m)
- 1.5
- 3
- 5
- Straight type communication plug connector
- T-branch type communication plug connector
- Without cable (without communication plug connector)
ClearTrống
Controller/driver mounting method
- DIN rail mounting type
- Screw mounting type
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

31 Day(s) or Less

32 Day(s) or Less

37 Day(s) or Less

42 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Electric Slide Table, Compact Type LES Series (LES8LAK-30-6N1)

Brand :

SMC

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

Refer to the manufacturer's catalog for specification and material details.
The product image is a representative image only. CAD data is not available for some model numbers.

Product Description

A compact-type electric actuator.
[Features]
· Compact: Workpiece mounting height reduced by up to 12% compared to LESH.
· Vertical work load: increased by up to 50%.
· Lightweight: reduced by up to 29%.
· Maximum pushing force: 180 N.
· Positioning repeatability: ±0.05 mm.
· Reduced cycle time. (Maximum acceleration/deceleration: 5,000 mm/S2, Maximum speed: 400 mm/s)

Electric Slide Table, Compact Type LES Series Specifications

Basic type (R type) external appearance

Symmetric type (L type) external appearance

In-line motor type (D type) external appearance

Specifications / Step Motor (24‑V DC Servo)

Model			LES8□		LES16□		LES25□
Actuator Specifications	Stroke [mm]		30, 50, 75		30, 50, 75, 100		30, 50, 75, 100, 125, 150
	Work Load [kg] ^{Note 1:}	Horizontal	1		3		5
	Work Load [kg] ^{Note 1:}	Vertical	0.5	0.25	3	1.5	5	2.5
	Pushing Force 30 to 70% [N] ^{Note 2: Note 3:}		6 to 15	4 to 10	23.5 to 55	15 to 35	77 to 180	43 to 100
	Speed [mm/s] ^{Note 1: Note 3:}		10 to 200	20 to 400	10 to 200	20 to 400	10 to 200	20 to 400
	Pushing Speed [mm/s]		10 to 20	20	10 to 20	20	10 to 20	20
	Maximum Acceleration/Deceleration [mm/s²]		5,000
	Positioning Repeatability [mm]		±0.05
	Lost Motion [mm] ^{Note 4:}		0.3 or less
	Screw Lead [mm]		4	8	5	10	8	16
	Impact/Vibration Resistance [m/s²] ^{Note 5:}		50/20
	Actuation Type		Slide screw + belt (R/L type), Slide screw (D type)
	Guide Type		Linear guide (circulating)
	Operating Temperature Range [°C]		5 to 40
	Operating Humidity Range [%RH]		90 or less (no condensation)
Electrical Specifications	Motor Size		□20		□28		□42
	Motor type		Step motor (24‑V DC servo)
	Encoder		Incremental A/B phase (800 pulses/rotation)
	Rated Voltage [V]		24 DC ±10%
	Power Consumption [W] ^{Note 6:}		18		69		45
	Standby Power Consumption When Operating [W] ^{Note 7:}		7		15		13
	Maximum Instantaneous Power Consumption [W] ^{Note 8:}		35		69		67
Lock Specifications	Type	^{Note 9:}	Non-excitation operation (non-magnetizing lock)
	Holding Force [N]		24	2.5	300	48	500	77
	Power Consumption [W] ^{Note 10:}		3.5		2.9		5
	Rated Voltage [V]		24 DC ±10%

Note 1: The speed changes according to the work load. Check the SMC catalog for the "Speed-Work Load" graph.
Note 2: Pushing force accuracy is ±20% (F.S.)
Note 3: The speed and force may change depending on the cable length, load, mounting conditions, etc. If the cable length exceeds 5 m, the speed and force will decrease by up to 10% for each 5 m. (At 15 m: reduced by up to 20%)
Note 4: A reference value for correcting an error in reciprocal operation.
Note 5: Vibration resistance: No malfunction occurred in a test ranging between 45 to 2,000 Hz (1 sweep), performed in both an axial direction and perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Note 6: The power consumption (including the controller) is for when the actuator is operating.
Note 7: The standby power consumption when operating (including the controller) is for when the actuator is stopped in the set position during operation. Except during pushing operations.
Note 8: The maximum instantaneous power consumption (including the controller) is for when the actuator is operating. This value can be used for selecting the power supply capacity.
Note 9: With lock only.
Note 10: For an actuator with a lock, add the power consumption for the lock.

Specifications / Servo Motor (24 V DC)

Model			LES8□A		LES16□A		LES25RA ^{Note 1:} LES25LA ^{Note 1:}
Actuator Specifications	Stroke [mm]		30, 50, 75		30, 50, 75, 100		30, 50, 75, 100, 125, 150
	Work Load [kg]	Horizontal	1		3		5
	Work Load [kg]	Vertical	1	0.5	3	1.5	4	2
	Pushing Force 50 to 100% [N] ^{Note 2:}		7.5 to 11	5 to 7.5	17.5 to 35	10 to 20	31 to 62	19 to 38
	Speed [mm/s]		1 to 200	1 to 400	1 to 200	1 to 400	1 to 200	1 to 400
	Pushing Speed [mm/s]		1 to 20
	Maximum Acceleration/Deceleration [mm/s²]		5,000
	Positioning Repeatability [mm]		±0.05
	Lost Motion [mm] ^{Note 3:}		0.3 or less
	Screw Lead [mm]		4	8	5	10	8	16
	Impact/Vibration Resistance [m/s²] ^{Note 4:}		50/20
	Actuation Type		Slide screw + belt (R/L type), Slide screw (D type)
	Guide Type		Linear guide (circulating)
	Operating Temperature Range [°C]		5 to 40
	Operating Humidity Range [%RH]		90 or less (no condensation)
Electrical Specifications	Motor Size		□20		□28		□42
	Motor Output [W]		10		30		36
	Motor type		Servo motor (24 V DC)
	Encoder (Angular Displacement Sensor)		Incremental A/B/Z phase (800 pulses/rotation)
	Rated Voltage [V]		24 DC ±10%
	Power Consumption [W] ^{Note 5:}		42		68		97
	Standby Power Consumption When Operating [W] ^{Note 6:}		8 (horizontal) / 19 (vertical)		9 (horizontal) / 23 (vertical)		16 (horizontal) / 32 (vertical)
	Maximum Instantaneous Power Consumption [W] ^{Note 7:}		71		102		111
Lock Specifications	Type	^{Note 8:}	Non-excitation operation (non-magnetizing lock)
	Holding Force [N]		24	2.5	300	48	500	77
	Power Consumption [W] ^{Note 9:}		3.5		2.9		5
	Rated Voltage [V]		24 DC ±10%

Note 1: LES25DA is not available.
Note 2: The pushing force range for LES8□A is 50 to 75%. Pushing force accuracy is ±20% (F.S.)
Note 3: A reference value for correcting an error in reciprocal operation.
Note 4: Vibration resistance: No malfunction occurred in a test ranging between 45 to 2,000 Hz (1 sweep), performed in both an axial direction and perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Impact resistance: No malfunction occurred when the actuator was tested with a drop tester in both an axial direction and a perpendicular direction to the lead screw. (Test was performed with the actuator in the initial state.)
Note 5: The power consumption (including the controller) is for when the actuator is operating.
Note 6: The standby power consumption when operating (including the controller) is for when the actuator is stopped in the set position while operating with maximum load. Except during pushing operations.
Note 7: The maximum instantaneous power consumption (including the controller) is for when the actuator is operating. This value can be used for selecting the power supply capacity.
Note 8: With lock only.
Note 9: For an actuator with a lock, add the power consumption for the lock.

Dimensions - Basic Type / R Type

(Units: mm)

LES8R dimensional drawing

Connector Dimensional Drawing (LES8R)

(Units: mm)

Model	L	D	E	F	G	H	J
LES8R□□-30□-□□□□□	94.5	26	88.7	62.5	2	27	27
LES8R□□-50□-□□□□□	137.5	46	131.7	105.5	3	29	58
LES8R□□-75□□-□□□□□	162.5	50	156.7	130.5	4	30	60

Note 1: Range within which the table can move when it returns to origin, etc. Make sure any workpiece mounted on the table does not interfere with the workpieces and equipment, etc., around the table.
Note 2: Position after return to origin.
Note 3: Values within [ ] are for when the direction of return to origin has been changed.
Note 4: If workpiece-retaining screws are too long, they may touch the guide block and cause a malfunction. Use screws that are between the maximum and minimum screw-in depths in length.
Note 5: Secure the motor cable and lock cable so that they are not repeatedly bent.

LES16R dimensional drawing

Connector Dimensional Drawing (LES16R)

(Units: mm)

Model	L	C	D	E	F	G	H	J
LES16R□□-30□-□□□□□	108.5	4	38	102.3	78	2	40	40
LES16R□□-50□-□□□□□	136.5	6	34	130.3	106	2	78	78
LES16R□□-75□□-□□□□□	180.5	8	36	174.3	150	4	36	72
LES16R□□-100□□-□□□□□	205.5	10	36	199.3	175	5	36	108

Notes

Setting Precautions

*Do not apply load in excess of the specification limits.
*Select a suitable actuator by work load and allowable moment. If the product is used outside of the specification limits, the unbalanced load applied to the guide will be excessive and have adverse effects, such as creating play on the guide, degrading accuracy and shortening the lifespan of the product.
*Do not use the product in applications where excessive external force or impact force is applied to it. Doing so can cause the product to malfunction.

Usage Precautions

*The actual speed of the actuator is affected by the load. Check the model selection and specifications sections in the SMC catalog when selecting a model.
*Do not apply load, impact or resistance in addition to the transferred load during return to origin. Doing this may cause displacement to the origin position. This is because the origin position is detected based on the detected motor torque.
*The table and guide block are made of a special stainless steel, but can rust when exposed to environments where water droplets can adhere to it.
*Do not dent, scratch or otherwise damage the body, table or end-plate mounting surfaces. This may cause unevenness in the mounting surfaces, play in the guide or an increase in the sliding resistance.
*Do not dent, scratch or otherwise damage the surface over which the rail and guide will move. This may cause play or an increase in sliding resistance.
*Do not apply strong impact or an excessive moment while mounting workpieces. If an external force over the allowable moment is applied, it may cause play in the guide or an increase in the sliding resistance.
*Refer to the SMC catalog for product information other than what is detailed above.
*The product image is a representative image only.

: 30; 45; 60

Part Number
LES8LAK-30-6N1

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Stroke (mm)	Max. Transportable Mass Range (Horizontal) (kg)	Max. Transportable Mass (Horizontal) (kg)	Max. Transportable Mass Range (Vertical) (kg)	Max. Transportable Mass (Vertical) (kg)	Drive Method	Lead (mm)	I/O Module	Table Width W1 (mm)	Max. Thrust Force Range (N)	Max. Thrust Force (N)	Table Length L1 (mm)	Operating Environment	Maximum Velocity (mm/sec)	Size	Motor type	Motor mounting position	Motor options	Mounting support	Actuator/cable type	Actuator cable length (m)	Controller/driver type	I/O cable length / communication plug (m)	Controller/driver mounting method
	-	1 Piece(s)		Quote	30	0~2.0	1	0~2.0	1	[Slide Screw] Slide Screw + Belt	4	NPN	32.2	0~100	11	88.7	Standard	200	8	Servo motor (24 V DC)	Symmetric type / L type	No options	Without side holder	Without cable	Without cable	LECP6/LECA6 (step data input type)	1.5	Screw mounting type

Loading...Tải…

Basic InformationThông tin cơ bản

Main Body, Peripheral Components	Main Body	Type	Slider	Guide	Provided
Input Power Supply	DC24V	Position Detection	Incremental	Brake	Not Provided
Noise Filter	Not Provided	Positioning Repeatability(µm)	±50

Please check the type/dimensions/specifications of the part LES8LAK-30-6N1 in the Electric Slide Table, Compact Type LES Series series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần LES8LAK-30-6N1 trong chuỗi Electric Slide Table, Compact Type LES Series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Products like this...

Part Number
LES16DAJ-100B
LES16DAJ-100B-R36PD
LES16DAJ-100B-R56P5D
LES8LAK-30-R36N1D
LES8LAK-30-R36ND
LES8LAK-30-RA6ND

Standard Unit Price	Minimum order quantity	Days to ShipSố ngày giao hàng	Stroke (mm)	Max. Transportable Mass Range (Horizontal) (kg)	Max. Transportable Mass (Horizontal) (kg)	Max. Transportable Mass Range (Vertical) (kg)	Max. Transportable Mass (Vertical) (kg)	Drive Method	Lead (mm)	I/O Module	Table Width W1 (mm)	Max. Thrust Force Range (N)	Max. Thrust Force (N)	Table Length L1 (mm)	Operating Environment	Maximum Velocity (mm/sec)	Size	Motor type	Motor mounting position	Motor options	Mounting support	Actuator/cable type	Actuator cable length (m)	Controller/driver type	I/O cable length / communication plug (m)	Controller/driver mounting method
-	1 Piece(s)	Quote	100	2.1~5.0	3	0~2.0	1.5	-	10	Not Provided	40.2	0~100	20	199.5	Standard	400	16	Servo motor (24 V DC)	In-line motor type / D type	With lock	Without side holder	Without cable	Without cable	Without controller/driver	Without cable (without communication plug connector)	Screw mounting type
-	1 Piece(s)	Quote	100	2.1~5.0	3	0~2.0	1.5	-	10	PNP	40.2	0~100	20	199.5	Standard	400	16	Servo motor (24 V DC)	In-line motor type / D type	With lock	Without side holder	Robotic cable (flex-resistant cable)	3	LECP6/LECA6 (step data input type)	Without cable (without communication plug connector)	DIN rail mounting type
-	1 Piece(s)	Quote	100	2.1~5.0	3	0~2.0	1.5	-	10	PNP	40.2	0~100	20	199.5	Standard	400	16	Servo motor (24 V DC)	In-line motor type / D type	With lock	Without side holder	Robotic cable (flex-resistant cable)	5	LECP6/LECA6 (step data input type)	5	DIN rail mounting type
-	1 Piece(s)	Quote	30	0~2.0	1	0~2.0	1	[Slide Screw] Slide Screw + Belt	4	NPN	32.2	0~100	11	88.7	Standard	200	8	Servo motor (24 V DC)	Symmetric type / L type	No options	Without side holder	Robotic cable (flex-resistant cable)	3	LECP6/LECA6 (step data input type)	1.5	DIN rail mounting type
-	1 Piece(s)	Quote	30	0~2.0	1	0~2.0	1	[Slide Screw] Slide Screw + Belt	4	NPN	32.2	0~100	11	88.7	Standard	200	8	Servo motor (24 V DC)	Symmetric type / L type	No options	Without side holder	Robotic cable (flex-resistant cable)	3	LECP6/LECA6 (step data input type)	Without cable (without communication plug connector)	DIN rail mounting type
-	1 Piece(s)	Quote	30	0~2.0	1	0~2.0	1	[Slide Screw] Slide Screw + Belt	4	NPN	32.2	0~100	11	88.7	Standard	200	8	Servo motor (24 V DC)	Symmetric type / L type	No options	Without side holder	Robotic cable (flex-resistant cable)	10	LECP6/LECA6 (step data input type)	Without cable (without communication plug connector)	DIN rail mounting type

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

type

Stroke(mm)

Max. Transportable Mass Range (Horizontal)(kg)

Max. Transportable Mass (Horizontal)(kg)

Max. Transportable Mass Range (Vertical)(kg)

Max. Transportable Mass (Vertical)(kg)

Drive Method

Lead(mm)

I/O Module

Table Width W1(mm)

Max. Thrust Force Range(N)

Max. Thrust Force(N)

Table Length L1(mm)

Operating Environment

Maximum Velocity(mm/sec)

Size

Motor type

Motor mounting position

Motor options

Mounting support

Actuator/cable type

Actuator cable length(m)

Controller/driver type

I/O cable length / communication plug(m)

Controller/driver mounting method

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Electric Slide Table, Compact Type LES Series (LES8LAK-30-6N1)

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Electric Slide Table, Compact Type LES Series Specifications

Specifications / Step Motor (24‑V DC Servo)

Specifications / Servo Motor (24 V DC)

Dimensions - Basic Type / R Type

Notes

Setting Precautions

Usage Precautions

Basic InformationThông tin cơ bản

Products like this...

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng