(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- For PCB
- Panel Mount
- Cable Connection
-
Rated Current(A)
-
Wiring Method
- Crimp
- Other
-
Connection direction
- Straight
- Angle
-
Plating of part touching terminal
- Gold
- No terminal
- Tin
-
Product Category
-
Specifications
- NA
- With panel lock
-
Features
- Loose terminal
- NA
-
Conforming wire size(AWG)
- 20–22
- 22 to 20
- 28 to 24
- NA
-
Contact Pitch(mm)
-
Wire connection form
- Crimp case
- Female terminal
- Male terminal
- Right angle dip
- Straight dip
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
Specify AlterationsChỉ định thay đổi
Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】 (DF1E-3P-2.5DS(05))
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 16,380VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.
Main Features of DF1E Series 2.5‑mm Pitch Board-to-Cable Connector With Lock
Added full-lock function / Inner-lock system full-lock mechanism / Mis-insertion prevention
Can be double locked
Added full-lock function
The full-lock mechanism features an inner lock system. This mechanism prevents disengagements due to unexpected external shock.
Increase in crimping contact fixation force and semi-insertion prevention
The double lock is activated for the usage method in which stress is applied to the cable, to increase crimping contact fixation force, and to prevent the semi-insertion (incomplete insertion) of the crimping contact.
Adopts a molded lance
A molded lance has been adopted as the contact lances may become deformed due to terminal entanglement after crimping.
Prevents mis-insertion
Equipped with a mechanism which completely prevents reverse insertion and insertion between dissimilar contacts.
Solder crack prevention measures
Glass-reinforced resin has been adopted for the pin header as a measure against solder cracking caused by heat shrinkage.
Potting (resin filler) compatible
Pin headers in which potting is possible are available in the product lineup. Low-profile (in-house comparison) models with a mounting height of 19.8 mm (no retainer) compatible with potting of up to 8 mm are available.
Reduced production equipment costs
Because DF1B series crimping contacts are used for the female contacts, there is no need to invest in new equipment. However, if applying a retainer with a wire of AWG#22 or higher, please use DF1E crimp contacts. Female in-line crimp contacts are used in combination with DF1B applicators so there is no need to investment in new equipment.
Wide range of applications
Circuit board soldered DIP types and in-line types with a wide range of applications are available within the same product series.
Compliant with UL and C-UL standards
Supports use with glow wires (compliant with IEC 60695-2-11)
Product Standards
| Rating | Rated Current (Note 1) AWG#20 to 24: 3 A 26: 2 A 28: 1 A 30: 0.5 A Rated Voltage 250 V AC | Operating temperature range: -35 to +85°C (Note 2) Operating humidity range 40 to 80% | Storage temperature range -10 to +60°C (Note 3) Storage humidity range 40 to 70% (Note 3) |
|---|
| Ratings of UL and C-UL Standard Compliant Products | ||
|---|---|---|
| Rating | Rated Current | AWG#20 to 22: 3 A AWG#24 to 28: 1 A AWG#30: 0.5 A |
| Rated voltage | 30 V AC | |
UL, C-UL File No. E52653
(C-UL applicable country: Canada / UL applicable country: U.S.A.)
| Item | Standard | Conditions |
|---|---|---|
| 1. Contact resistance | 30 mΩ or less | Measure at 20 mV or less and 1 mA |
| 2. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC |
| 3. Withstand Voltage | There shall be no flashover or dielectric breakdown. | Apply 650 V AC of voltage for 1 min. |
| 4. Single unit insertion/extraction force | Min. 0.29 N, Max. 4.41 N | Measure using a steel pin of □0.635 ±0.002 |
| 5. Durability (insertion/extraction) | 30 mΩ or less | 30 insertions and extractions |
| 6. Vibration resistance | There shall be no discontinuity for 1 μs or greater. | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm. Three directions, 2 hours |
| 7. Shock resistance | There shall be no discontinuity for 1 μs or greater. | Acceleration: 490 m/s2, 11 ms, Half sine wave, Three times each in 3 directions |
| 8. Humidity resistance | 30 mΩ or less | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours |
| 9. Temperature cycle | 30 mΩ or less | (-55°C: 30 mins > 5 to 35°C: 5 mins > 85°C: 30 mins > 5 to 35°C: 5 mins) 5 cycles |
| 10. Solder Heat Resistance | No deformation of components affecting performance. | Flow: 260°C, 10 seconds Manual soldering - Soldering iron temperature: 300°C for 3 seconds |
Note 1: The rated current may vary depending on the wire size used. The rating of the header is 3 A.
(Note 2) This includes temperature increases caused by the flow of current.
(Note 3) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature and humidity range are applicable in a non-energized state after board mounting.
Product Specifications
| Connector Type | Contacts, sockets, headers, in-line plugs, accessories |
|---|---|
| Compliance Standards | JIS, IEC |
| Number of Contacts | 2, 10, 11, 12, 13, 14, 15, 3, 4, 5, 6, 7, 8, 9 |
| No. of Rows (Mating Part) | 1 |
| Mounting Pitch | 3 mm |
| Opening Pitch | 2.5 mm |
| Rated Current | 3 A |
| Rated Voltage (AC) | 250 V AC |
| Number of Matings and Un-Matings | 30, 50 |
| Board Mounting Method | Through-hole DIP |
| Opening Direction | Straight |
| Board Mounting Style | Standard on-board |
| Panel Mounting Method | Snap-in |
| Contact Plating | Gold, tin |
| Wiring Method | Crimp |
| Compatible Wire Type | Discrete wire |
| Compatible Wire Size (AWG) Min. | AWG 22, 28 |
| Compatible Wire Size (AWG) Max. | AWG 20, 24 |
| Operating Temperature Range (Max.) | 85°C |
| Operating Temperature Range (Min.) | -35°C |
| Glow Wire Compatible | Yes |
Product Materials
| Product | Part Name | Materials | Finish | Flame-Retardant Standard |
|---|---|---|---|---|
| Socket | Insulator | Polyamide resin | Natural (white) | UL94V-0 |
| Header | Insulator | Polyamide resin (glass-reinforced) | Natural (beige) | UL94V-0 |
| Contacts | Brass | Tin or gold plated | - | |
| In-line plug | Insulator | Polyamide resin | Natural (white) | UL94V-0 |
| Retainer | Insulator | Polyamide resin | Black | UL94V-0 |
| Crimp contact | Contacts | Phosphor bronze | Tin or gold plated | - |
Product Usage Precautions
1. Recommended soldering conditions
- Flow conditions for automatic soldering devices - Solder temperature: 260°C, Soldering time: within 10 seconds
- Manual soldering conditions - Soldering iron temperature: 300°C, Soldering time: within 3 seconds
2. Cleaning conditions
- If washing with potting-compatible headers, be aware that any residual cleaning solutions within the connector may cause malfunctions to occur.
3. Precautions
- Forcible extraction of connectors may cause connector damage to occur. If extraction is difficult, gently push in the connector and engage the lock to facilitate extraction.
- Depending on the wiring layout within equipment, tension may be applied to the wires, possibly causing the contacts to become disengaged. The manufacturer recommends the use of a retainer when this happens.
- Incomplete insertion of the contact can be prevented by mounting a retainer; however, mounting of a retainer might not be possible when the contact protrudes beyond the socket. Insert the contact securely and then mount the retainer.
- If the potting process is implemented, be sure to fill the connector with resin with due consideration given to the surface tension of the resin.
- Depending on the manufacturing lot of this product or its storage state following manufacture, the color/hue of the product may change slightly. However, this does not affect performance.
| Part Number |
|---|
| DF1E-3P-2.5DS(05) |
| Part Number | Price | Minimum Order Qty. | Number of pc(s). included in pkg.Number of pc(s). included in pkg. | Volume Discount | Days to ShipSố ngày giao hàng | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Wiring Method | Connection direction | Plating of part touching terminal | Product Category | Specifications | Features | Conforming wire size (AWG) | Contact Pitch (mm) | Wire connection form | Terminal pitch (mm) | Special Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
647,730 VND | 1 Pack(s) | 100 Pieces Per Package 100 Pieces Per Package | 6 Day(s) or more | Male | 3 | For PCB | 3 | [Other] Circuit Board Mounting (DIP) | Angle | Tin | Pin Header | NA | NA | NA | 2.5 | Right angle dip | 2.5 | - |
Loading...Tải…
Basic InformationThông tin cơ bản
| Connector Shape | Rectangular | Connector series initials | D/E/F | D/E/F | DF |
|---|---|---|---|---|---|
| Allowable Voltage(V) | AC250 | Representative Standard | UL / CUL | Operating Temperature Range(°C) | -35 to +85 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy