(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product DetailSpecification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- For PCB
- Panel Mount
-
Wiring Method
- Solder
- Crimp
-
Connection direction
- Straight
-
Protection function (environmentally resistant)
- Available
- NA
- Available
-
Shell Size
-
Plating of part touching terminal
- Gold
- Silver
-
Product Category
- Jack
- Plug
- Receptacle
- Terminal
-
Specifications
- Loose terminal
- Low Cost
- Screw coupling
- Series terminal
- Shield Type
- Standard
-
Dimensions (vertical × horizontal × depth)(mm)
- 1.15 x 1.2 x 10
- φ 11 × 12
- φ 11 × 12.2
- φ 11 × 14
- φ 11 × 15.5
- φ 11 × 15.6
- φ 11 × 28.5
- φ 11 × 35.3
- φ 11.5 × 35
- φ 12 × 35
- φ 14 × 12
- φ 14 × 12.2
- φ 14 × 14
- φ 14 × 15.5
- φ 14 × 15.6
- φ 14 × 16
- φ 14 × 32.5
- φ 14 × 43.5
- φ 14 × 46.5
- φ 14.7 × 41.3
- φ 14.7 × 43
- φ 15 x 45.8
- φ 17 x 43
- φ 18 × 15
- φ 18 × 17.8
- φ 18 × 19.2
- φ 18 × 20.2
- φ 18 × 58.5
- φ 19 × 59
- φ 20 × 56.5
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 9 Day(s) or Less
Specify AlterationsChỉ định thay đổi
HR10 Series Miniature Circular Connector【1-100 Pieces Per Package】 (HR10G-10R-10SB(71))
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- From :
- 8,490VND/Unit
-
- Order Qty :
-
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
Small-diameter circular connectors, with the smallest size being close to the thickness of a cigarette. For use with camera interfaces.
[Features]
· Single-action, push-pull lock mechanism enables quick insertion and removal.
· Simply push when inserting to securely lock.
· Five key ensures insertion only to the intended location even when inserting by feel.
· Contacts are arranged in a safe configuration that prevents the contact pins from being damaged when aligning the five key by feel.
· Push-pull lock means little space is necessary for insertion and removal, making it possible to mount multiple connectors in close proximity to each other.
· No small screwdrivers are required for connector disassembly or assembly, meaning wiring and mounting can be performed easily using a JIS wrench.
· With a simple and neat external appearance and a satin finish on the top surface, the connectors will not stand out.
· Compact, high density, high reliability and simple design.
· Extremely simple insertion and removal.
[Applications]
· Convenient for a wide range of equipment due to its small size, light weight, and excellent operability.
High-Performance Circular Connector for Camera Interfaces
Can be used with a wide range of equipment thanks to its small size, light weight, and excellent operability.
Specifications of HR10 Series Miniature Circular Connectors
Product Standards
| Rating | Shell Size | Number of Contacts | Rated Current |
|---|---|---|---|
| 7 | 4 5 6 | 2 A | |
| 10 | 10 12 | 2 A | |
| 13 | 20 | 2 A |
| Rating | Shell Size | Number of Contacts | Rated voltage |
|---|---|---|---|
| 7 | 4 5 6 | 150 V AC, 200 V DC 100 V AC, 140 V DC 100 V AC, 140 V DC | |
| 10 | 10 12 | 100 V AC, 140 V DC | |
| 13 | 20 | 100 V AC, 140 V DC |
| Rating | Operating Temperature Range | -25 to 85°C |
|---|---|---|
| Storage temperature range | -10 to 60°C |
| Item | Standard | Conditions |
|---|---|---|
| 1. Contact resistance | 10 mΩ or less | Measure at 1 A DC |
| 2. Insulation resistance: | 1,000 MΩ or more | Measure at 100 V DC |
| 3. Withstand voltage | There shall be no flashover or dielectric breakdown | 300 V AC for 1 min., 4-pin: 500 V AC for 1 min. |
| 4. Vibration resistance | There shall be no electrical discontinuity for 10 μs or greater | Test at 10 to 55 Hz/cycle, Single amplitude: 0.75 mm Three directions, 2 hours each. |
| 5. Shock | There shall be no electrical discontinuity for 10 μs or greater | Test at acceleration 490 m/s2, duration: 11 ms, 3 directions, 3 times each. |
| 6. Mating cycle | Contact resistance 15 mΩ or less | 1,000 times |
| 7. Temperature cycle | Insulation resistance 1,000 MΩ or more | Leave at -55°C: 30 mins. > Room temperature: 10 to 15 mins. > 85°C: 30 mins.>Room temperature: 10 to 15 mins. Total of 5 cycles. |
| 8. Humidity resistance | Insulation resistance: 5 MΩ or more (at high humidity), 50 MΩ or more (when dry) | Temperature: 40°C, relative humidity: 90 to 95%, left for 96 hours. |
Materials/Processing
| Item | Materials | Finish | Notes |
|---|---|---|---|
| Exterior | Zinc alloy, brass | Matte-finished nickel plating | ― |
| Insulator | Polyamide resin, PBT resin | ― | Blue, black |
| Contacts | Copper alloy | HR10: gold plating HR10A: silver plating | ― |
| Product Name | Materials | Finish |
|---|---|---|
| Plug shell | Brass | Gold plating |
| Jack shell | Brass | |
| Insulator | Tetrafluoride resin | |
| Male contact | Phosphor bronze | Gold plating |
| Female contacts | Beryllium copper |
Coaxial Contact Materials/Processing
| Item | Standard Value |
|---|---|
| Impedance | 50 Ω |
| Insulation resistance | 1,000 MΩ or more at 250 V DC |
| Contact resistance | Center 6.5 mΩ or less, Exterior 4 mΩ or less at 1 A DC |
| Withstand Voltage | At 250 V AC (r.m.s) for 1 min. |
| Voltage standing wave ratio | 0 to 1,000 MHz, 1.3 or less |
| Pull force (extraction force) | 4.9 N (500 gf) or more |
Coaxial contact performance
Connector Combination Diagram
(Notes)
- 1. When using a plug with male terminal, be sure to use a receptacle or jack fitted with female terminal.
- 2. The standard finish of the terminal is gold plating for the HR10, and silver plating for the HR10A and HR10G. Be sure to use male and female connectors of the same plating.
Product Usage
Connector Handling
Wiring procedure (plug side)
- *This applies also to the jack side assembly procedure.
- *No special procedure is given here for the receptacle side because no special procedure is necessary.
| HR10 Type | HR10A Type | |
|---|---|---|
| 1 | Use cables with a nominal sectional area of 0.129 mm2 (26 AWG) or less at the finished outer diameters applicable for each size. | |
| 2 | After processing the cable ends according to the dimensions in the above drawings, fit the parts to the cable as shown in the drawings. | |
| Fit the parts to the cable in the following order: tightener, clamp washer and plug body. | Fit the parts to the cable in the following order: tightener, cord bushing and plug body. | |
| 3 | (Solder type) Insert the P shell unit into the assembly tool stand and solder it. (Crimp type) After crimping the appropriate crimp terminal to the cable core, insert the crimp terminal into the terminal hole in the P shell unit. | |
| 4 | Assemble the connector in the following order. | |
| (1) Screw the plug body into the thread in the P shell unit with the tightening force shown in Table 1 using a torque wrench with a fixed torque. Before tightening the plug body, slacken part C so that no load is applied to the soldered wires. (2) Apply the clamp washer to the bifurcated part of the plug body, and then tighten the tightener until surface B touches the plug body surface A. (Note) In order to prevent loosening, apply a screw-locking adhesive at the threaded section. | (1) Fix by crimping the clamp accompanying the cable with the cable crimping tool (HR10A-TC-02). (2) Screw the plug body into the thread in the P shell unit with the tightening force shown in Table 1 using a torque wrench with a fixed torque. Before tightening the plug body, slacken part D so that no load is applied to the soldered wires. (3) Tighten the set screw so that the tip of the screw presses one of the 2 bosses on the clamp. Fix the set screw with a tightening torque of 0.3 N·m (3 kgf/cm.) (4) Attach the cord bushing to the plug body. (Note) In order to prevent loosening, apply a screw-locking adhesive at the threaded section. | |
| 5 | This completes the work. | |
Wiring procedure (plug side) work steps
Product Usage Precautions
- 1. Make sure the power is off before mating or un-mating the connector.
- 2. Use connectors with socket (female) contacts at the power side of the circuit.
- 3. Make sure that the coupling is in the completely locked position.
- 4. Cable clamping, cable rotation, and other forces may vary with the cable construction. Make sure that your cable is suitable for use with these connectors before usage and production.
| Part Number |
|---|
| HR10G-10R-10SB(71) |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Wiring Method | Connection direction | Protection function (environmentally resistant) | Shell Size | Plating of part touching terminal | Product Category | Specifications | Dimensions (vertical × horizontal × depth) (mm) | Operating Temperature Range (°C) | Mating partner 1 | Mating partner 2 | Mating partner 3 | Mating partner 4 | Mating partner 5 | Mating partner 6 | Mating partner 7 | Mating partner 8 | Mating partner 9 | Mating partner 10 | Mating partner 11 | Mating partner 12 | Mating partner 13 | Mating partner 14 | Mating partner 15 | Mating partner 16 | Mating partner 26 | Mating partner 27 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
529,581 VND | 1 Piece(s) | 4 Day(s) or more | - | Female | 10 | For PCB | Solder | Straight | NA | 10 | Silver | Receptacle | Shield Type | φ 14 × 15.6 | -25 to +85 | HR10A-10P-10P(73) | HR10A-10P-10PC(73) | HR10A-10PB-10P(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...Tải…
Basic InformationThông tin cơ bản
| Connector Shape | Round shape | Connector series initials | G/H/I | G/H/I | HR10 |
|---|---|---|---|---|---|
| Rated Current(A) | 2 | Features | NA |
Please check the type/dimensions/specifications of the part HR10G-10R-10SB(71) in the HR10 Series Miniature Circular Connector series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần HR10G-10R-10SB(71) trong chuỗi HR10 Series Miniature Circular Connector.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
Products like this...
| Part Number |
|---|
| HR10-10R-12P(73) |
| HR10-10R-12PA(73) |
| HR10-10R-12S(73) |
| HR10G-10R-12P(73) |
| HR10G-10R-12S(71) |
| HR10G-10R-12SC(71) |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Wiring Method | Connection direction | Protection function (environmentally resistant) | Shell Size | Plating of part touching terminal | Product Category | Specifications | Dimensions (vertical × horizontal × depth) (mm) | Operating Temperature Range (°C) | Mating partner 1 | Mating partner 2 | Mating partner 3 | Mating partner 4 | Mating partner 5 | Mating partner 6 | Mating partner 7 | Mating partner 8 | Mating partner 9 | Mating partner 10 | Mating partner 11 | Mating partner 12 | Mating partner 13 | Mating partner 14 | Mating partner 15 | Mating partner 16 | Mating partner 26 | Mating partner 27 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
314,555 VND | 1 Piece(s) | 6 Day(s) or more | - | Male | 12 | Panel Mount | Solder | Straight | NA | 10 | Gold | Receptacle | Standard | φ 14 × 16 | -25 to +85 | HR10-10P-12S(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
394,246 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Male | 12 | For PCB | Solder | Straight | NA | 10 | Gold | Receptacle | Standard | φ 14 × 15.5 | -25 to +85 | HR10-10P-12S(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
581,656 VND | 1 Piece(s) | 6 Day(s) or more | - | Female | 12 | Panel Mount | Solder | Straight | NA | 10 | Gold | Receptacle | Standard | φ 14 × 16 | -25 to +85 | HR10-10P-12P(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
257,568 VND | 1 Piece(s) | 6 Day(s) or more | - | Male | 12 | Panel Mount | Solder | Straight | NA | 10 | Silver | Receptacle | Shield Type | φ 14 × 16 | -25 to +85 | HR10A-10P-12S(73) | HR10A-10P-12SC(73) | HR10A-10PD-12S(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
157,191 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Female | 12 | Panel Mount | Solder | Straight | NA | 10 | Silver | Receptacle | Shield Type | φ 14 × 16 | -25 to +85 | HR10A-10P-12P(73) | HR10A-10P-12PC(73) | HR10A-10PD-12P(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
178,281 VND | 1 Piece(s) | 4 Day(s) or more | 10 | Female | 12 | Panel Mount | Crimp | Straight | NA | 10 | Silver | Receptacle | Shield Type | φ 14 × 12 | -25 to +85 | HR10A-10P-12P(73) | HR10A-10P-12PC(73) | HR10A-10PD-12P(73) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy