(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Select part number to Order Now/ Add to Cart
This is a RM series waterproof connector. A waterproof function has been added, while maintaining the features of the conventional product.
The RM-W series features a threaded coupling type lock mechanism that provides reliable waterproof performance
Assembly type (straight plug / RM15W)
Assembly type (right-angle plug / RM15W)
1. Abundant variations
The RM-W series features a wide variety of plugs and receptacles, enabling you to find the ideal product for the given application.
Three types of plugs are available: straight type, straight low-profile type and right-angle type.
A single-unit, waterproof type receptacle is available in which the connector itself is waterproof.
The screw-fastening type is available either as a front mounting type or a back mounting type.
Available number of contacts: 2, 3, 4, 8, 10, 12, 15, 20, 40, 55. Two types of contact plating are available: gold plating and silver plating.
2. Waterproof structure
Meets IP68 standards for waterproof performance when mated. Also, the single unit waterproof receptacle features IP68-class waterproof performance.
3. Flexible cable arrangement
With the assembly type right-angle plug, the cable can be pulled out in any direction (360° range.)
Rating | Rated voltage | 600 V AC, 840 V DC (2-contact) 500 V AC, 700 V DC (3-, 4-, 8-contact) 350 V AC, 490 V DC (10-contact) 350 V AC, 490 V DC (12-contact) |
---|---|---|
Rated Current | 10 A (2-, 3-, 4-contact) 5 A (8-, 10-, 12-contact) | |
Operating temperature range (Note 1) | -25°C to +85°C | |
Storage temperature range (Note 2) | -10°C to +60°C |
Item | Standard | Conditions | |
---|---|---|---|
1. Contact resistance | 2-, 3-, 4-contacts: 2 mΩ or less, 8-, 10-, 12-contacts: 4 mΩ or less | Measure at 1 A DC | |
2. Insulation resistance: | 1,000 MΩ or more | Measure at 500 V DC | |
3. Withstand voltage | There shall be no flashover or dielectric breakdown | 2-contacts: 1,800 V AC 3-contacts: 2,000 V AC 4-, 8-contacts: 1,500 V AC 10-, 12-contacts: 1,000 V AC | Apply for 1 min. |
4. Vibration resistance | There shall be no electrical discontinuity for 10 μs or greater | Test at frequency 10 to 55 to 10 Hz for 1 cycle and at half-amplitude of 0.75 mm in three directions for 10 cycles | |
5. Shock | There shall be no electrical discontinuity for 10 μs or greater | Test at acceleration of 490 m/s2, duration of 11 ms with sine half waveform in 6 directions, 3 times each | |
6. Mating cycle | 2-, 3-, 4-contacts: 4 mΩ or less, 8-, 10-, 12-contacts: 8 mΩ or less | Measure contact resistance after 2,000 operations | |
7. Temperature cycle | 100 MΩ or more | Test at -55°C: 30 mins. > Room temperature: 10 to 15 mins. > +85°C: 30 mins.> Room temperature: 10 to 15 mins for 5 cycles. | |
8. Humidity resistance (steady state) | 100 MΩ or more (when dry) | Measure insulation resistance after leaving at a temperature of 40°C and humidity of 90 to 95% for 96 hours | |
9. Waterproofing | No water penetration inside connector | Leave at water depth of 1.8 m for 48 hours while mated with the connector. |
(Note 1) The operating temperature range includes temperature increases caused by the flow of current.
(Note 2) The storage temperature range refers to the long-term storage of unused products that have not undergone termination. The operating temperature and humidity range are applicable in a non-energized state after termination.
Rating | Rated voltage | 600 V AC, 840 V DC (40-contacts) 500 V AC, 700 V DC (15-contacts, 55-contacts) 350 V AC, 490 V DC (20-contacts) |
---|---|---|
Rated Current | 5 A | |
Operating temperature range (Note 1) | -25°C to +85°C | |
Storage temperature range (Note 2) | -10℃ to +60℃ |
Item | Standard | Conditions | |
---|---|---|---|
1. Contact resistance | 4 mΩ or less | Measure at 1 A DC | |
2. Insulation resistance: | 1,000 MΩ or more | Measure at 500 V DC | |
3. Withstand voltage | There shall be no flashover or dielectric breakdown | 40-contacts: 1,800 V AC 15-, 55-contacts: 1,500 V AC 20-contacts: 1,000 V AC | Apply for 1 min. |
4. Vibration resistance | There shall be no electrical discontinuity for 10 μs or greater | Test at frequency 10 to 55 to 10 Hz for 1 cycle and at half-amplitude of 0.75 mm in three directions for 10 cycles | |
5. Shock | There shall be no electrical discontinuity for 10 μs or greater | Test at acceleration of 490 m/s2, duration of 11 ms with sine half waveform in 6 directions, 3 times each | |
6. Mating cycle | 8 mΩ or less | Measure contact resistance after 2,000 operations | |
7. Temperature cycle | 100 MΩ or more | Test at -55°C: 30 mins. > Room temperature: 10 to 15 mins. > +85°C: 30 mins.> Room temperature: 10 to 15 mins for 5 cycles. | |
8. Humidity resistance (steady state) | 100 MΩ or more (when dry) | Measure insulation resistance after leaving at a temperature of 40°C and humidity of 90 to 95% for 96 hours | |
9. Waterproofing | No water penetration inside connector | Leave at water depth of 1.8 m for 48 hours while mated with the connector. |
(Note 1) The operating temperature range includes temperature increases caused by the flow of current.
(Note 2) The storage temperature range for the above standards refers to the long-term storage of unused products that have not undergone termination. The operating temperature and humidity range are applicable in a non-energized state after termination.
Item | Materials | Finish | Note |
---|---|---|---|
Exterior | Zinc alloy, brass | Chromium plating or nickel plating | - |
Insulator | Diallylphthalate resin | - | UL94V-0, (black) |
Contacts | Brass, phosphor bronze, or copper alloy | Silver plating or gold plating | - |
Gasket | SIR (black or red) or NBR (gray) | - | - |
Materials/Finish
(Note) Do not mix different contact platings (e.g. don't combine gold and silver platings.)
Item | Materials | Finish | Note |
---|---|---|---|
Exterior | Brass | Chromium plating or nickel plating | - |
Insulator | Diallylphthalate resin | - | UL94V-0, (black) |
Contacts | Brass or copper alloy | Silver plating | - |
Gasket | Chloroprene rubber or SIR | - | (Black) |
Materials/Finish
(Note) Do not mix different contact platings (e.g. Do not combine gold and silver platings.)
Part Number |
---|
RM12WBP-CP(4)(71) |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Allowable Voltage (V) | Wiring Method | Connection direction | Shell Size | Plating of part touching terminal | Product Category | Specifications | Features | Conforming cable outer diameter (mm) | Special Notes | Mating partner 1 | Mating partner 2 | Mating partner 3 | Mating partner 4 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
94,883 VND | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM12WBP | NA | φ4 | - | - | - | - | - |
Loading...Tải…
Connector Shape | Round shape | Connector series initials | P/Q/R | P/Q/R | RM |
---|---|---|---|---|---|
Protection function (environmentally resistant) | IP67 | Operating Temperature Range(°C) | -25 to +85 |
Please check the type/dimensions/specifications of the part RM12WBP-CP(4)(71) in the Multi-Purpose Circular Waterproof Connector, RM-W Series series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần RM12WBP-CP(4)(71) trong chuỗi Multi-Purpose Circular Waterproof Connector, RM-W Series.
Part Number |
---|
JR16WCC-12(72) |
JR16WCC-6(72) |
JR16WCCA-8(72) |
RM12WBP-CP(5)(71) |
RM12WBP-CP(6)(71) |
RM12WBP-CP(7)(71) |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Allowable Voltage (V) | Wiring Method | Connection direction | Shell Size | Plating of part touching terminal | Product Category | Specifications | Features | Conforming cable outer diameter (mm) | Special Notes | Mating partner 1 | Mating partner 2 | Mating partner 3 | Mating partner 4 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
227,526 VND | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM15WTPZA / For RM21WTPS | Screw tightening | φ12 | - | - | - | - | - | ||
339,945 VND | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM15WTPZA / For RM21WTPS | Screw tightening | φ6 | - | - | - | - | - | ||
136,086 VND | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM15WTPZA | Without screw | φ8 | - | - | - | - | - | ||
121,230 VND | 1 Piece(s) | 4 Day(s) or more | 10 | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM12WBP | NA | φ5 | - | - | - | - | - | ||
91,120 VND | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM12WBP | NA | φ6 | - | - | - | - | - | ||
91,090 VND | 1 Piece(s) | 4 Day(s) or more | - | - | - | - | - | - | - | - | NA | No terminal | Cord clamp | For RM12WBP | NA | φ7 | - | - | - | - | - |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy