(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Loading...Tải…
Screw Types | Taper for Pipe | Nominal | 3/4-14 |
---|---|---|---|
Chamfer threads | 3P | Tool Material Type | High-speed steel |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tap Type | Tap for pipes |
Hole type | For through hole / For blind hole | Coating Y/N | NA |
Overall Length (L)(mm) | 85 | Class | ANSI G |
Thread Length(mm) | 35 | Shank diameter (Ds)(mm) | 23 |
Show MoreXem thêm | |||
Shank square width (K)(mm) | 17 | Shank square part length(mm) | 20 |
Number of Grooves | 4 | Shape | h |
Length to standard diameter part(mm) | 22.95 | - | - |
Show LessHiện ít hơn |
Loading...Tải…
Loading...Tải…
Loading...Tải…
Loading...Tải…
Loading...Tải…
Screw Types | Taper for Pipe | Nominal | 3/4-14 |
---|---|---|---|
Chamfer threads | 3P | Tool Material Type | High-speed steel |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tap Type | Tap for pipes |
Hole type | For through hole / For blind hole | Coating Y/N | NA |
Overall Length (L)(mm) | 85 | Class | ANSI G |
Thread Length(mm) | 35 | Shank diameter (Ds)(mm) | 23 |
Show MoreXem thêm | |||
Shank square width (K)(mm) | 17 | Shank square part length(mm) | 20 |
Number of Grooves | 4 | Shape | h |
Length to standard diameter part(mm) | 22.95 | - | - |
Show LessHiện ít hơn |
Loading...Tải…
Screw Types | Taper for Pipe | Nominal | 3/4-14 |
---|---|---|---|
Chamfer threads | 3P | Tool Material Type | High-speed steel |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tap Type | Tap for pipes |
Hole type | For through hole / For blind hole | Coating Y/N | NA |
Overall Length (L)(mm) | 85 | Class | ANSI G |
Thread Length(mm) | 35 | Shank diameter (Ds)(mm) | 23 |
Show MoreXem thêm | |||
Shank square width (K)(mm) | 17 | Shank square part length(mm) | 20 |
Number of Grooves | 4 | Shape | h |
Length to standard diameter part(mm) | 22.95 | - | - |
Show LessHiện ít hơn |
Tap for machining American taper pipe "NPTF" female threads.
[Features]
· The groove is a straight hand tap type. Comes with three biting teeth at the tip.
· General-purpose tap for general steel materials.
[Applications]
· To be used when machining American tapered thread for dry seal pipe "NPTF" female thread.
* American standard pipe threads, available in many types, can be complicated.
* Check carefully when purchasing taps, as there are various kinds available such as "NPT", "NPTF", "NPS", and "NPSF".
Loading...Tải…
Screw Types | Taper for Pipe | Nominal | 3/4-14 |
---|---|---|---|
Chamfer threads | 3P | Tool Material Type | High-speed steel |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tap Type | Tap for pipes |
Hole type | For through hole / For blind hole | Coating Y/N | NA |
Overall Length (L)(mm) | 85 | Class | ANSI G |
Thread Length(mm) | 35 | Shank diameter (Ds)(mm) | 23 |
Show MoreXem thêm | |||
Shank square width (K)(mm) | 17 | Shank square part length(mm) | 20 |
Number of Grooves | 4 | Shape | h |
Length to standard diameter part(mm) | 22.95 | - | - |
Show LessHiện ít hơn |
Loading...Tải…
Screw Types | Taper for Pipe | Nominal | 3/4-14 |
---|---|---|---|
Chamfer threads | 3P | Tool Material Type | High-speed steel |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] | Tap Type | Tap for pipes |
Hole type | For through hole / For blind hole | Coating Y/N | NA |
Overall Length (L)(mm) | 85 | Class | ANSI G |
Thread Length(mm) | 35 | Shank diameter (Ds)(mm) | 23 |
Show MoreXem thêm | |||
Shank square width (K)(mm) | 17 | Shank square part length(mm) | 20 |
Number of Grooves | 4 | Shape | h |
Length to standard diameter part(mm) | 22.95 | - | - |
Show LessHiện ít hơn |
Part Number |
---|
TNTF12Q |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Nominal | Overall Length (L) (mm) | Thread Length (mm) | Shank diameter (Ds) (mm) | Shank square width (K) (mm) | Shank square part length (mm) | Number of Grooves | Shape | Length to standard diameter part (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
6,275,736 VND | 1 Piece(s) | 9 Day(s) | 3/4-14 | 85 | 35 | 23 | 17 | 20 | 4 | h | 22.95 |
Part Number |
---|
Please check the type/dimensions/specifications of the part TNTF12Q in the Hand Taps for American Dryseal Taper Pipe Threads_NPTF series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần TNTF12Q trong chuỗi Hand Taps for American Dryseal Taper Pipe Threads_NPTF.
Part Number |
---|
TNTF01L |
TNTF04O |
TNTF06O |
TNTF08Q |
TNTF16T |
TNTF20T |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Nominal | Overall Length (L) (mm) | Thread Length (mm) | Shank diameter (Ds) (mm) | Shank square width (K) (mm) | Shank square part length (mm) | Number of Grooves | Shape | Length to standard diameter part (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
987,666 VND | 1 Piece(s) | 9 Day(s) | 1/16-27 | 54 | 17 | 8 | 6 | 9 | 4 | i | 12 | ||
1,419,583 VND | 1 Piece(s) | 9 Day(s) | 1/4-18 | 62 | 28 | 11 | 9 | 12 | 4 | h | 17.45 | ||
2,301,836 VND | 1 Piece(s) | 9 Day(s) | 3/8-18 | 65 | 28 | 14 | 11 | 14 | 4 | h | 17.65 | ||
3,833,768 VND | 1 Piece(s) | 9 Day(s) | 1/2-14 | 80 | 35 | 18 | 14 | 17 | 4 | h | 22.85 | ||
11,591,078 VND | 1 Piece(s) | 9 Day(s) | 1'-11.5 | 95 | 45 | 26 | 21 | 24 | 5 | h | 27.40 | ||
22,547,486 VND | 1 Piece(s) | 9 Day(s) | 1'1/4-11.5 | 105 | 45 | 32 | 26 | 30 | 5 | h | 28.10 |
Part Number |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy