(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Loading...Tải…
Use | Lever Type (Indicator) | Display Method | Dial |
---|---|---|---|
Maximum Measuring Length (Adjustment Range)(mm) | 0 ~ 1 | Scale Interval / Minimum Display(mm) | 0.01 |
With / Without measurement data output terminal | Not Included | Measuring Range(mm) | 0~0.8 |
Measuring Force(N) | 0.5 or Less | Wide Range Bound Accuracy(µm) | 13 |
Adjacent Error(µm) | 5 | Application | Lever type dial gauge |
Repeatability(µm) | 3 | Material | Main body: Steel |
Show MoreXem thêm | |||
Features | · Measurements can be taken easily in places that cannot be measured using a dial gauge or where it is too deep to measure. · Precious stones embedded in respective bearings. | - | - |
Show LessHiện ít hơn |
Japanese Only
Loading...Tải…
Loading...Tải…
Loading...Tải…
Loading...Tải…
Loading...Tải…
Use | Lever Type (Indicator) | Display Method | Dial |
---|---|---|---|
Maximum Measuring Length (Adjustment Range)(mm) | 0 ~ 1 | Scale Interval / Minimum Display(mm) | 0.01 |
With / Without measurement data output terminal | Not Included | Measuring Range(mm) | 0~0.8 |
Measuring Force(N) | 0.5 or Less | Wide Range Bound Accuracy(µm) | 13 |
Adjacent Error(µm) | 5 | Application | Lever type dial gauge |
Repeatability(µm) | 3 | Material | Main body: Steel |
Show MoreXem thêm | |||
Features | · Measurements can be taken easily in places that cannot be measured using a dial gauge or where it is too deep to measure. · Precious stones embedded in respective bearings. | - | - |
Show LessHiện ít hơn |
Loading...Tải…
Use | Lever Type (Indicator) | Display Method | Dial |
---|---|---|---|
Maximum Measuring Length (Adjustment Range)(mm) | 0 ~ 1 | Scale Interval / Minimum Display(mm) | 0.01 |
With / Without measurement data output terminal | Not Included | Measuring Range(mm) | 0~0.8 |
Measuring Force(N) | 0.5 or Less | Wide Range Bound Accuracy(µm) | 13 |
Adjacent Error(µm) | 5 | Application | Lever type dial gauge |
Repeatability(µm) | 3 | Material | Main body: Steel |
Show MoreXem thêm | |||
Features | · Measurements can be taken easily in places that cannot be measured using a dial gauge or where it is too deep to measure. · Precious stones embedded in respective bearings. | - | - |
Show LessHiện ít hơn |
A convenient dial gauge for the measurement of unevenness/straightness in narrow places where a dial gauge cannot be used.
[Features]
· Measurements can be taken easily in places that cannot be measured using a dial gauge, such as in narrow or deep spaces.
· A jewel has been assembled to each bearing.
· Lever type dial gauge.
· The main unit is made of steel.
[Applications]
· For measuring internal/external measurements, groove width, centering, parallelism, flatness, etc.
Loading...Tải…
Use | Lever Type (Indicator) | Display Method | Dial |
---|---|---|---|
Maximum Measuring Length (Adjustment Range)(mm) | 0 ~ 1 | Scale Interval / Minimum Display(mm) | 0.01 |
With / Without measurement data output terminal | Not Included | Measuring Range(mm) | 0~0.8 |
Measuring Force(N) | 0.5 or Less | Wide Range Bound Accuracy(µm) | 13 |
Adjacent Error(µm) | 5 | Application | Lever type dial gauge |
Repeatability(µm) | 3 | Material | Main body: Steel |
Show MoreXem thêm | |||
Features | · Measurements can be taken easily in places that cannot be measured using a dial gauge or where it is too deep to measure. · Precious stones embedded in respective bearings. | - | - |
Show LessHiện ít hơn |
Japanese Only
Loading...Tải…
Use | Lever Type (Indicator) | Display Method | Dial |
---|---|---|---|
Maximum Measuring Length (Adjustment Range)(mm) | 0 ~ 1 | Scale Interval / Minimum Display(mm) | 0.01 |
With / Without measurement data output terminal | Not Included | Measuring Range(mm) | 0~0.8 |
Measuring Force(N) | 0.5 or Less | Wide Range Bound Accuracy(µm) | 13 |
Adjacent Error(µm) | 5 | Application | Lever type dial gauge |
Repeatability(µm) | 3 | Material | Main body: Steel |
Show MoreXem thêm | |||
Features | · Measurements can be taken easily in places that cannot be measured using a dial gauge or where it is too deep to measure. · Precious stones embedded in respective bearings. | - | - |
Show LessHiện ít hơn |
![]() | ![]() | Holdng position Dial gauge can not be correctly used only from fixing the jig.
|
01 Usedial gauge to measure cylinder foundness of lathe processing. | 02 To measure concave and convex of end surface. |
![]() | ![]() | ![]() |
01 To measure the vise on lathe. | 02-1 During process of lathe, set the workpiece on scroll chuck, then measure the deformation of cylinder surface. | 02-2 To measure the inner core degree. |
![]() | 03 Convenience of perform measurement of narrower groove surface or to make measurement that's more precise than dial gauge. The more parallel of the gauge head and measuring surface, the more it will be measured accurately. To measure the inner core degree. *Inaccuracy will occur if magneticbase doesn't have fine adjustment device or is place at a inconvenient location. | ! Gauge head should be parallel with measuring surface and right angle with measuring direction. |
![]() |
Part Number |
---|
TI-8038 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng |
---|---|---|---|---|
1,845,623 VND | 1 Piece(s) | 10 Day(s) |
Part Number |
---|
Use | Lever Type (Indicator) | Display Method | Dial | Maximum Measuring Length (Adjustment Range)(mm) | 0 ~ 1 |
---|---|---|---|---|---|
Scale Interval / Minimum Display(mm) | 0.01 | With / Without measurement data output terminal | Not Included | Measuring Range(mm) | 0~0.8 |
Measuring Force(N) | 0.5 or Less | Wide Range Bound Accuracy(µm) | 13 | Adjacent Error(µm) | 5 |
Application | Lever type dial gauge | Repeatability(µm) | 3 | Material | Main body: Steel |
Features | · Measurements can be taken easily in places that cannot be measured using a dial gauge or where it is too deep to measure. · Precious stones embedded in respective bearings. |
Please check the type/dimensions/specifications of the part TI-8038 in the Dial Indicator, Measurement Range 0 to 0.8 mm series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần TI-8038 trong chuỗi Dial Indicator, Measurement Range 0 to 0.8 mm.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy