(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Loading...Tải…
Thread Types | Unified | Nominal | NO.12-28UNF |
---|---|---|---|
Tool Material Type | Carbide | Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Copper (Cu)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] |
Tap Model | Tapping Cutter | Bore Model | For Blind Holes |
Coating Presence | Included | Surface Coating | TiAlN |
L(mm) | - | Number of flutes | 6 |
Effective Length(mm) | 11.62 | Manufacturer Code | 06-00003-12280 |
Show MoreXem thêm | |||
Flute Diameter D(φ) | 4.29 | Link Diameter d(φ) | 6 |
Under Neck Diameter d2(mm) | 3.02 | Neck Angle γ(°) | 12 |
Show LessHiện ít hơn |
Loading...Tải…
Loading...Tải…
Loading...Tải…
Loading...Tải…
Loading...Tải…
Thread Types | Unified | Nominal | NO.12-28UNF |
---|---|---|---|
Tool Material Type | Carbide | Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Copper (Cu)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] |
Tap Model | Tapping Cutter | Bore Model | For Blind Holes |
Coating Presence | Included | Surface Coating | TiAlN |
L(mm) | - | Number of flutes | 6 |
Effective Length(mm) | 11.62 | Manufacturer Code | 06-00003-12280 |
Show MoreXem thêm | |||
Flute Diameter D(φ) | 4.29 | Link Diameter d(φ) | 6 |
Under Neck Diameter d2(mm) | 3.02 | Neck Angle γ(°) | 12 |
Show LessHiện ít hơn |
Loading...Tải…
Thread Types | Unified | Nominal | NO.12-28UNF |
---|---|---|---|
Tool Material Type | Carbide | Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Copper (Cu)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] |
Tap Model | Tapping Cutter | Bore Model | For Blind Holes |
Coating Presence | Included | Surface Coating | TiAlN |
L(mm) | - | Number of flutes | 6 |
Effective Length(mm) | 11.62 | Manufacturer Code | 06-00003-12280 |
Show MoreXem thêm | |||
Flute Diameter D(φ) | 4.29 | Link Diameter d(φ) | 6 |
Under Neck Diameter d2(mm) | 3.02 | Neck Angle γ(°) | 12 |
Show LessHiện ít hơn |
[Features]
· It adopts a flute shape with an emphasis on sharpness, improving machining accuracy.
· It adopts MUGEN Coating Premium for the realization of a long lifespan.
· For Unify standard threads
Loading...Tải…
Thread Types | Unified | Nominal | NO.12-28UNF |
---|---|---|---|
Tool Material Type | Carbide | Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Copper (Cu)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] |
Tap Model | Tapping Cutter | Bore Model | For Blind Holes |
Coating Presence | Included | Surface Coating | TiAlN |
L(mm) | - | Number of flutes | 6 |
Effective Length(mm) | 11.62 | Manufacturer Code | 06-00003-12280 |
Show MoreXem thêm | |||
Flute Diameter D(φ) | 4.29 | Link Diameter d(φ) | 6 |
Under Neck Diameter d2(mm) | 3.02 | Neck Angle γ(°) | 12 |
Show LessHiện ít hơn |
Loading...Tải…
Thread Types | Unified | Nominal | NO.12-28UNF |
---|---|---|---|
Tool Material Type | Carbide | Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Copper (Cu)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] |
Tap Model | Tapping Cutter | Bore Model | For Blind Holes |
Coating Presence | Included | Surface Coating | TiAlN |
L(mm) | - | Number of flutes | 6 |
Effective Length(mm) | 11.62 | Manufacturer Code | 06-00003-12280 |
Show MoreXem thêm | |||
Flute Diameter D(φ) | 4.29 | Link Diameter d(φ) | 6 |
Under Neck Diameter d2(mm) | 3.02 | Neck Angle γ(°) | 12 |
Show LessHiện ít hơn |
Part Number |
---|
MMTU-NO.12-28UNF |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | Nominal | L (mm) | Number of flutes | Effective Length (mm) | Manufacturer Code | Flute Diameter D (φ) | Link Diameter d (φ) | Under Neck Diameter d2 (mm) | Neck Angle γ (°) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3,676,091 VND | 1 Piece(s) | 6 Day(s) or more | NO.12-28UNF | - | 6 | 11.62 | 06-00003-12280 | 4.29 | 6 | 3.02 | 12 |
Part Number |
---|
Please check the type/dimensions/specifications of the part MMTU-NO.12-28UNF in the Thread Cutting Tool (for Unified Threads) MMTU series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần MMTU-NO.12-28UNF trong chuỗi Thread Cutting Tool (for Unified Threads) MMTU.
Part Number |
---|
MMTU-NO.1-64UNC |
MMTU-NO.1-72UNF |
MMTU-NO.10-24UNC |
MMTU-NO.2-56UNC |
MMTU-NO.2-64UNF |
MMTU-NO.3-48UNC |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to ShipSố ngày giao hàng | Nominal | L (mm) | Number of flutes | Effective Length (mm) | Manufacturer Code | Flute Diameter D (φ) | Link Diameter d (φ) | Under Neck Diameter d2 (mm) | Neck Angle γ (°) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3,346,206 VND | 1 Piece(s) | 6 Day(s) or more | NO.1-64UNC | 45 | 6 | 3.98 | 06-00003-01640 | 1.4 | 4 | 0.84 | 12 | ||
3,346,206 VND | 1 Piece(s) | 6 Day(s) or more | NO.1-72UNF | 45 | 6 | 3.97 | 06-00003-01720 | 1.45 | 4 | 0.93 | 12 | ||
3,676,091 VND | 1 Piece(s) | 6 Day(s) or more | NO.10-24UNC | - | 6 | 10.29 | 06-00003-10240 | 3.52 | 6 | 2.14 | 12 | ||
3,346,206 VND | 1 Piece(s) | 6 Day(s) or more | NO.2-56UNC | 45 | 6 | 4.67 | 06-00003-02560 | 1.63 | 4 | 0.99 | 12 | ||
3,346,206 VND | 1 Piece(s) | 6 Day(s) or more | NO.2-64UNF | 45 | 6 | 4.67 | 06-00003-02640 | 1.69 | 4 | 1.11 | 12 | ||
3,346,206 VND | 1 Piece(s) | 6 Day(s) or more | NO.3-48UNC | 45 | 6 | 5.37 | 06-00003-03480 | 1.88 | 4 | 1.15 | 12 |
Part Number |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy