Interface Terminal Blocks (Round/Y Terminal Types)（Connector：FCN Connector）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Terminal Block, PCN7 Series

  TOYOGIKEN

  An ultra small size with a pitch between terminals of just 7 mm. Ideal for size reducing PLC or SBC interfaces. A compact type for helping reduce the size of control panels.[Features]· An ultra small size with a pitch between terminals of just 7 mm.· Ideal for size reducing PLC or SBC interfaces.· A compact type for helping reduce the size of control panels.· The connector and terminal block are easy-to-handle 1:1 wire connection types.· Uses SS terminal screws for easy wiring.· Structured to prevent screws from dropping out and becoming lost.· The terminal is an open/close type and is pre-equipped with a name plate featuring the terminal number on both sides. Designed for greater efficiency during wiring.· Compatible with both DNI rail mounting and direct mounting methods.

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Mitsubishi Electric / Omron	7	PLC	128 ～ 149	M3	UL / CUL / TUV	40	36

  From: 1,015,960 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  

  

  Terminal Block, PCN Series

  TOYOGIKEN

  [Features]·The width of the main body is 40 mm compared to the width of the DIN rail of 35 mm.· Boasts an even slimmer finish.· The terminal block and connector are connected on the circuit board, helping prevent mis-wiring.· The terminal number and connector number are wired 1-to-1.· Circuits can be freely designed.·Workability is further improved by adopting a new screw method.·If you use a fork type terminal, the PCN series is definitely advantageous.· A lever type which enables neat and tidy removal from rails.· No tools required for removal, and so no need for wasted space on the backside of the main body.· Compatible with both rail mounting and direct mounting.·Equipped with support screw (dedicated Y-shaped crimp terminal).·The terminal screw has a fall-prevention structure and the washer is floating, which saves labor-hours for connection work.·It can be easily attachment/removal from the IEC 35 mm rail by the lever method, and no tools are required.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Mitsubishi Electric / Omron	7.62	Other	162	M3	UL / CUL / TUV	40	36

  From: 1,077,433 VND
  Special Price
  Days to Ship: Số ngày giao hàng: 11 Day(s)

  11 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MIL

  MISUMI

  A spring-loaded terminal block that can be directly connected to the circuit of a Mitsubishi Electric PLC. It is an input/output PLC connector terminal block allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Mitsubishi Electric	7	PLC	125	M3	-	42	51

  From: 579,976 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PLC Connector Terminal Block (for Mitsubishi Electric PLC, Input/Output), Weight: 150 g

  MISUMI

  This is a PLC connector terminal block compatible with Mitsubishi Electric PLC circuits, greatly reducing wiring labor-hours and allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Mitsubishi Electric	7	PLC	129	M3	-	42	42.4

  From: 823,106 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  +com PLC connector terminal block (for Mitsubishi Electric input/output)

  MISUMI

  [New Product] 8 pole + 32 PLC signal common terminal block incorporated into a 40 pole terminal block

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Mitsubishi Electric	7	PLC	125	M3	-	42	51

  From: 803,593 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interface Terminal Block ULTRA Series

  IO LINK

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	80	With DIN rail	-	7.62	Other	70	M3	-	173.6	-

  From: 1,238,471 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  PLC Connector Terminal Block (for OMRON PLC, Output), Mounting Method: DIN Rail / Direct Mount

  MISUMI

  This is a PLC connector terminal block for output compatible with OMRON PLC circuits, greatly reducing wiring labor-hours and allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  CAD ：

  2D

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Omron	7	PLC	129	M3	-	42	42.4

  From: 830,976 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Connector Terminal Block Conversion Unit XW2R (for general purpose use)

  OMRON

  [Features]· A general purpose type connector terminal block conversion unit that can be used for saving on the amount of wiring required in a variety of measures.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	Other	-	7	-	151.7	Other	-	48.35	50

  From: 1,294,671 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Interface Terminal Block SR Series

  IO LINK

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	With DIN rail	-	7.62	Other	40	M3	-	162	-

  From: 972,570 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s)

  8 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels

  WAGO

  A module that converts an FCN connector into a terminal block.[Features]·Converts the half-pitch MDR connector used as standard in servo amplifiers to a terminal block.·Simple one-to-one circuit. Wide cable connection range from 0.08 to 1.5 or 2.5 mm2.·Connector is MIL, FCN (AMP)··Industry standard.·3.5 mm pitch and 5 mm pitch terminal blocks··Wide lineup.·KEYENCE PLC CPU "-KV" is also available··Lineup added.·Features a cage clamp connection that is strong against vibration··Improved reliability.[Applications]·Ideal for when soldering work is difficult and troublesome for connecting the FCN connector and electric cable.·Ideal for prototyping and experimental applications when you want to convert the input/output signals of KEYENCE PLC to a terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	With DIN rail	-	3.5	-	77	-	-	22.6	55

  From: 1,489,196 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWI Series (Terminal Pitch 7 mm), Compatible Equipment: PLC

  MISUMI

  This is a terminal block equipped with a Centronics connector that supports both DIN rail mounting and screw mounting, allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Volume Discount

  • For Signal
  • Sensor
  • PLC
  • 125 V

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	-	7	PLC	150	M3	-	41.5	42.5

  From: 855,950 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PX7DS Series FCN Connector Terminal Block (Horizontal Insert/Terminal Pitch: 7.62mm)

  YOSHIDADENKI

  A 7.62 mm pitch type. Ideal for times when there are height restrictions.[Features]· Equipped with a common terminal block for each power supply and signal, and so no external relay terminal block required.· A variety of models are available which support PLCs and NCs from a variety of companies.· Self-up and screw-up types are available.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	-	7.62	PLC	158.4	M3	UL / CSA	43.2	54.8

  From: 1,324,788 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct Mount

  MISUMI

  A terminal block equipped with an FCN 40-core connector that reduces work labor-hours thanks to its spring-loaded structure, allowing lower stage wiring without upper stage terminal wiring getting in the way.

  • Connection in Boards
  • Space-saving
  • PLC
  • 125 V

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Mitsubishi Electric / Omron	7	PLC	146	M3	-	42	51

  From: 642,895 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)

  YOSHIDADENKI

  A space saving 7.62 mm pitch FCN connector type terminal block.

  Connector	Number of Poles(Pole)	Mounting Method	Supported equipment manufacturer	Pitch Between Terminals(mm)	Supported equipment	Dimension width(mm)	Terminal Block Screw	Representative Standard	Dimension vertical(mm)	Dimension depth(mm)
  FCN Connector	40	DIN rail/Direct attachment	Mitsubishi Electric / Omron	7.62	PLC	101.21	M3	UL / CSA	64	48

  From: 1,356,685 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Connector
Number of Poles(Pole)
Mounting Method
Supported equipment manufacturer
Pitch Between Terminals(mm)
Supported equipment
Dimension width(mm)
Terminal Block Screw
Representative Standard
Dimension vertical(mm)
Dimension depth(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	TOYOGIKEN	TOYOGIKEN	MISUMI	MISUMI	MISUMI	IO LINK	MISUMI	OMRON	IO LINK	WAGO	MISUMI	YOSHIDADENKI	MISUMI	YOSHIDADENKI
Product SeriesDòng sản phẩm	Terminal Block, PCN7 Series	Terminal Block, PCN Series	PLC Connector Terminal Block (for Mitsubishi Electric, Input/Output) FCN/MIL	PLC Connector Terminal Block (for Mitsubishi Electric PLC, Input/Output), Weight: 150 g	+com PLC connector terminal block (for Mitsubishi Electric input/output)	Interface Terminal Block ULTRA Series	PLC Connector Terminal Block (for OMRON PLC, Output), Mounting Method: DIN Rail / Direct Mount	Connector Terminal Block Conversion Unit XW2R (for general purpose use)	Interface Terminal Block SR Series	IM Series IM-M/IMF MIL/FCN Connector Terminal Block for Control Panels	MWI Series (Terminal Pitch 7 mm), Compatible Equipment: PLC	PX7DS Series FCN Connector Terminal Block (Horizontal Insert/Terminal Pitch: 7.62mm)	MWS Series (Spring-Loaded), Mounting Method: DIN Rail / Direct Mount	PX7DW Series FCN Connector Terminal Block (center insertion/terminal Pitch: 7.62mm)
CADCAD	2D		2D		2D		2D
From	1,015,960 VND	1,077,433 VND Special Price On Sale Till 31/03/2025	579,976 VND	823,106 VND	803,593 VND	1,238,471 VND	830,976 VND	1,294,671 VND	972,570 VND	1,489,196 VND	855,950 VND	1,324,788 VND	642,895 VND	1,356,685 VND
Days to ShipSố ngày giao hàng	Same day or more	11 Day(s)	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s)	4 Day(s) or more	6 Day(s) or more	8 Day(s)	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật			Connection in Boards Space-saving PLC 125 V	Connection in Boards Space-saving PLC 125 V	Connection in Boards Space-saving PLC 125 V		Connection in Boards Space-saving PLC 125 V				For Signal Sensor PLC 125 V		Connection in Boards Space-saving PLC 125 V
Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector	FCN Connector
Number of Poles(Pole)	40	40	40	40	40	80	40	40	40	40	40	40	40	40
Mounting Method	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	With DIN rail	DIN rail/Direct attachment	Other	With DIN rail	With DIN rail	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment	DIN rail/Direct attachment
Supported equipment manufacturer	Mitsubishi Electric / Omron	Mitsubishi Electric / Omron	Mitsubishi Electric	Mitsubishi Electric	Mitsubishi Electric	-	Omron	-	-	-	-	-	Mitsubishi Electric / Omron	Mitsubishi Electric / Omron
Pitch Between Terminals(mm)	7	7.62	7	7	7	7.62	7	7	7.62	3.5	7	7.62	7	7.62
Supported equipment	PLC	Other	PLC	PLC	PLC	Other	PLC	-	Other	-	PLC	PLC	PLC	PLC
Dimension width(mm)	128 ～ 149	162	125	129	125	70	129	151.7	40	77	150	158.4	146	101.21
Terminal Block Screw	M3	M3	M3	M3	M3	M3	M3	Other	M3	-	M3	M3	M3	M3
Representative Standard	UL / CUL / TUV	UL / CUL / TUV	-	-	-	-	-	-	-	-	-	UL / CSA	-	UL / CSA
Dimension vertical(mm)	40	40	42	42	42	173.6	42	48.35	162	22.6	41.5	43.2	42	64
Dimension depth(mm)	36	36	51	42.4	51	-	42.4	50	-	55	42.5	54.8	51	48

Loading...Tải…