Square Connectors（Applicable pin/contact：Male (plug) Page2）

D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

HIROSE ELECTRIC

A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.[Features]• Metal shell makes it compact and sturdy.• Connectors can be mounted on the chassis, or on the front or back sides of the panel.• Height of the wiring side is greatly reduced to facilitate more compact sets.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

Half Pitch Interface Connector, DX Series

HIROSE ELECTRIC

I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.

MX23A Series, Contact

JAPANAVIATION

[Features]· A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

CDA/CDC Common Use Screw Type and Crimp Type 16A / 250V Insert

ILME

CDA/CDC, Common use screw type and crimp type, 16A / 250V, insert[Features]・CDA/CDC.・General-use screw type, crimp type.▪ 16A / 250V insert

MIL Connector PCB Straight Male Connector (BOX Model)

MISUMI

[Features]OMRON BOX type MIL straight male connector for circuit board mounting. It can be used for circuit boards of various factory automation equipment. Compared to circuit board mounting male connectors with levers, this connector is much smaller as it has no lever, making it very convenient for circuit board wiring in small devices. The widely used 2.54 mm pitch arrangement makes it compatible with commercially available universal circuit boards, etc.

• Volume Discount

• UL
• MIL
• Solder

CAD ：

2D

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.[Features]・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.・Thin type: mount height when used at a right angle: 4.8 mm.・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.・Further, there are settings available to provide a light feel even if tin plating is used.

D-Sub Connector (Ribbon Cable Insulation Displacement Connection Type) FD Series

HIROSE ELECTRIC

A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.[Features]· Has a metal shell and so is small and lightweight.· Connector mounting can be performed on the chassis, front or back, or one of the sides.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.· A connection press can also be used.

SMAW200-NN【100 Pieces Per Package】

YEONHO ELECTRONICS

YAW396-NNV【100 Pieces Per Package】

YEONHO ELECTRONICS

Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. It is a highly reliable crimp connection that can shorten the work time. Fully compatible with products from major connector manufacturers. Please check the male or female before ordering.

• Volume Discount

• UL
• IP65
• For Power Supply
• For Signal
• Connection between Boards
• Connection in Boards
• Screw Type
• Insertion
• 2DCAD
• Silver-Plated

CAD ：

2D

Solder and Machine Contact D-Sub Connector (High Current)

MISUMI

Made by ERNI in Germany. High-current capacity model supporting up to 20 A

• Volume Discount

• For Power Supply
• Connection between Boards
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Han Waterproof D-Model Connector (Crimped Connection)

MISUMI

D Model Connector

• Volume Discount

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Caulking
• Insertion
• Silver-Plated

CAD ：

2D

HIF3F Series 2.54‑mm Pitch Box Type Pin Header

HIROSE ELECTRIC

This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.[Features]▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.▪ Compatibility: pin header compatible with HIF3B series.

2.54-mm Pitch Low Profile Connector, HIF3FB and HIF3FC Series

HIROSE ELECTRIC

A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.[Features]・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.・Low profile: pin heads are at a low height of 9.2 mm.・The space between circuit boards when stacking is 12.2 mm.

Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

1‑mm Pitch Board-To-Cable Connector For LVDS Signals, FX15 Series

HIROSE ELECTRIC

A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

Small, Rectangular Interface Connector, 3200 Series

HIROSE ELECTRIC

This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.[Features]• A receptacle connector board implementation surface with a height of the 2.9 mm.• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.• This receptacle connector can also be prepared in an embossed packaging product format.• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.• A latch lock is applied to both sides for mating processes.• This lock is implemented with the minimum space possible, and helps downsize your product set.• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.• The number of pins available is either 8 or 10.

QE Series

JAPANAVIATION

Using a metallic outer shell, this square connector is fitted using a lever.[Features]· Hard-type with metallic shell. Structure that is resistant to vibrational impact due to a lever lock (original type).・A mismatch prevention key is included in the shell to prevent mistaken and reverse mating. By using the location setting post and key sold separately, 16 mismatch prevention patterns can be created.・Also compatible with WV0/WL1 and other specialized railroad cables.・3 cable-side plugs are provided to match the wires being used or the work being performed.Original type: with lever lock mechanismQE-A type: by enlarging the lever portion, this type is reinforced with a lever to prevent warping and other changes that occur during use.QE4 Type: by scaling up the shell wire pullout opening and cable clamp diameter, cables with large outer coverings can now be accommodated with ease.・Other than the original type, there is an enlarged mating shell and an enhanced shell to prevent prying and reverse mating on the panel side receptacle, as well as a noise reducing ferrite attached to the insulator. There are 3 types that include ferrite.・The panel side receptacle is compatible with both electric wire crimp connection contact and circuit board through hole connection contact (pin contact) types.・The shell type can be disassembled and rearranged for simple modification during circuit changes and incorrect wiring.

CD Common Use Crimp Type 10A / 50 to 250 V Insert

ILME

CD, general purpose crimped type, 10A / 50 - 250 V, Insert[Features]・CD general purpose crimped type.・10A/50 - 250V.▪ Insert

D-Sub Connectors XM3-L/XM2-L/XM4K/XM4L

OMRON

[Features]・ This D-sub connector series has been renewed with lead-free compatible products.・ The fastening screw diameter can be identified from its external appearance.・ A solution to problems associated with combining fasteners has been found.・ Shielded connectors for EMI countermeasures.▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).

Han, Insert, Hood/Housing, Accessory for Industrial Connectors

HARTING

Han, insert, hood/housing, accessory for industrial connectors.

Han, Industrial Connector, Module/Insert, 10 A

HARTING

Han, industrial connector, module/insert, 10 A.

Han Waterproof, Q-Model Connector (Weld-Wire Connection)

MISUMI

Waterproof Q-type connector manufactured by HARTING. Available for numerous applications, high contact density, fast and reliable processing, and available for various termination methods.

• Volume Discount

• UL
• CSA
• VDE
• For Power Supply
• For Signal
• Waterproof
• Crimp Terminal
• Lever Lock
• Silver-Plated

Solder/Machine Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Pressure-welded/Press Contact D-Sub Connector

MISUMI

Pressure Welding model allows wires to be connected easily and strain-relieving mounting demonstrates strong tensile force

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Pressure Welding
• Gold Plated

CAD ：

2D

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

• Volume Discount

• For Signal
• PLC
• EMI Countermeasure
• RS422
• RS232
• Screw Type
• Gold Plated
• Screw Lock

CAD ：

2D

MIL Press-fit Male Extension Connector

MISUMI

[Features]This is a male connector for IDC relay, manufactured by Hirose Electric. This is an IDC type connector that allows for batch IDC together with 1.27 mm pitch ribbon cable and wire-to-wire connection with MIL standard connectors (HIF3 B connectors). Since it has a locking mechanism after joining, it will not come off even if some pulling force is applied.

• Volume Discount

• UL
• MIL
• Caulking
• Gold Plated
• Lever Lock

CAD ：

2D

Han Waterproof A-Model Connector (Screw Connection)

MISUMI

A Model Connector

• Volume Discount

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Screw Type
• Insertion
• Silver-Plated

CAD ：

2D

HE Series, Universal Connector

WEIDMULLER

A 6-pole connector with multiple connection methods (500 V, 24 A, number of poles: 6 (+ PE), screw / spring / crimp / push-in)

1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series

HIROSE ELECTRIC

[Features]· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.· Contributing to a high-density board mounting.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

3.5‑mm Pitch 2-Row Connector For Small Internal Power Supplies, MDF6 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.[Features]· Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.· 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.· Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

Right Angle Type Connector RD*D Series

HIROSE ELECTRIC

These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.[Features]· Has a metal shell and so has a small and lightweight connector.• They are integrated with RD-type molds and are of simple construction.• They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.• The connection and the board mounting areas are metal plated.• Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).• A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.• Various accessories can be employed to allow these connectors to be used in different applications.

Rectangular Multi-Pin Rack / Panel Crimp Connector, QR/P Series

HIROSE ELECTRIC

Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.[Features]· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.• In addition, the insulation is a flame retardant material (UL9V-0).• Guide pins are made of metal for the durability to withstand coupling shocks.• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.

IL-AG9 Series

JAPANAVIATION

[Features]It is a versatile and easy-to-use small cable relay connector for various in-vehicle devices

3M^TM SCR Connector Wire Mount Plug

3M

[Features]・ Bellows type contacts with excellent twisting force and vibration resistance・ Achieves both miniaturization and support for large diameter cables with a contact pitch of 2-mm and a special solder tail arrangement・ 0.75 mm2 cable can be connected to all contacts・ Unique contact shape considering soldering workability[Applications]・ 2.0-mm pitch I/O connector for cable connection between devices for combination with a dedicated shell kit

Mini Delta Ribbon (MDR) System Wiremount Solder Plug

3M

[Features]· The MDR system consists of “industry standard product” half pitch I/O connectors.· Use of pre-loaded cantilever contacts ensures high reliability, requires little insertion and withdrawal strength and prevents twisting.· Accommodates a wide range of cable sizes from AWG#24 to AWG#30.· Solder wiring method that does not require special jigs or tools.· Solder heat resistance of 360°C for 10 seconds comparable to conventional connectors.· Unique contact shape that takes soldering workability into consideration.[Applications]· For cable connections between equipment.· Accommodates a wide range of cable sizes and ideal for solder wiring without special jigs or tools.

57E Series Noise Suppression Soldering Plug Connector

DDK

[Features]· 57E series connectors correspond to plugs of the 57 series 57-30 type (straight plug with cable hood) with noise suppression used to avoid the effects of interference.

CAD ：

2D

Miniature Low-Profile Interface DN Connector

HIROSE ELECTRIC

This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular[Features]· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.· The single-action lock mechanism provides excellent operability.· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.· The dip connector includes a snap (circuit board temporary joint) bracket.· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.· Depending on the application, cable can be extracted in either the vertical or horizontal direction.

CRC™ (Compact Robot Connector) (55836)

MOLEX

Molex models work with 7.0 A to 15.0 A currents and have a maximum pole number of 50. Optimal for commercial robots and FA-related applications (mating housing: 54333/54334)

MIXO Modular Insert & Contact

ILME

[Features]· MIXO.· MIXO modular inserts and contacts.· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.· Supports optical fiber, coaxial, and Dsub9Pin connectors.

Han Waterproof Connector DD Type Connector (Crimp Connection)

HARTING

Han D/DD Series connector (crimp connection).[Features]·High density contact··Supports requirements up to 250V/10A·Save time with quick connection using crimp contacts·Gold-plated and silver-plated contacts available·Compatible with thermo and 1mm FO contacts

RS Pro D-sub connector (Solder terminal)

RS Pro

RS Pro brand. High-quality solder D-sub connector.

Han, Industrial Connector, Insert, Accessory, 70 A / 100 A / 200 A Series

HARTING

Han, Industrial Connector, Insert, Accessory, 70 A / 100 A / 200 A Series

Centronics EMI Countermeasures Pressure Welding Type Connector (Male)

MISUMI