Square Connectors（Wire connection method：Solder）

Solder/Press Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

D-Sub Connector (Solder Termination Type), HD Series

HIROSE ELECTRIC

A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.[Features]· Small and lightweight connector due to metal shell.· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

Centronics Solder Spring-lock Connector (Male)

MISUMI

[Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

• Volume Discount

• For Signal
• Connection between Boards
• Printer
• Solder

CAD ：

2D

57 Series Soldering/DIP-Type Connector

DDK

A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.[Features]■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.· 57-10 type (unit connection plug).· 57-20 type (unit connection receptacle).· 57-30 type (plug with straight hood for cables).· 57-40 type (panel receptacle with locking spring).· 57-60 type (cable relay receptacle).

Centronics Solder Spring-lock Connector (Panel Mountable Female)

MISUMI

[Features]A Centronics connector for fixing with a lineup of low-priced products. A connector that is mounted on a panel and used to connect with a male connector. Cable is connected by soldering.

• Volume Discount

• For Signal
• Connection between Boards
• Printer

CAD ：

2D

Solder and Press Contact PLC D-Sub Connector

MISUMI

Used with Mitsubishi Electric Q series which is highly trusted in Japan

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

EMI Countermeasure Solder/Press Contact D-sub Connector

MISUMI

Entire shell has been nickel-plated as an EMI countermeasure, and dimple processed to ensure a firm contact with the partner

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

EMI Countermeasure Solder/Machine Contact D-Sub Connector

MISUMI

Has a machine contact for plug-in and removal durability, and bead processing ensures a firm contact with the partner

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

IEEE1284, Half-Pitch Connector, EMI-Countermeasure Solder Male Connector

MISUMI

High-speed Transfer Supporting Solder Model Half-pitch I/O Connector

• Volume Discount

• For Signal
• PLC
• Motor
• EMI Countermeasure
• SCSI
• Solder
• Gold Plated
• Screw Lock
• One-Touch Lock

CAD ：

2D

2.00-mm Pitch Serial I/O Connector

MOLEX

A Molex 2.0 mm pitch connector for external relay connection.

FCN Female Solder Connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

• Volume Discount

• For Signal
• PLC
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

D-Sub, D02, D02-M15 Series

JAPANAVIATION

A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.[Features]・The D-sub connector is becoming the standard with its combination of pin and socket connector types.・Interchangeable with different connector types and commonly used accessories.・The shell joint shape has polarity, fully preventing accidental reverse insertion.・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

Solder/Press-fit (High-density) D-Sub Connector

MISUMI

High-density D-sub Connector. Allows for high-density wiring without increasing wiring space

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

MELSEC-A/Q Series, MELSEC iQ-R Series CC-Link Wiring Connector

MITSUBISHI

Optional CC-Link family 40-pin connector.

17JE Series Soldering Type Connector

DDK

17 Series (Dsub type) soldering connection type square connector for cable equipment. [Features]· Square connector for solder wire connections, with solder cup type contact.· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.· The hood is metalized plastic, which provides weight reduction and a high shielding effect.· Either the pin connector or the socket connector can be selected.· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure. [Applications]· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

CAD ：

2D

MIL Connector PCB Straight Male Connector (Lever Model)

MISUMI

[Features]Hirose Electric's lever-type, circuit board mount, MIL straight male connector. A wire-to-wire connector for OMRON KEYENCE PLC. It is a highly versatile circuit board connector that can be mounted on commercially available universal circuit boards, etc., as the circuit board mounting hole pitch is 2.54 mm. The pin direction is vertical to the circuit board surface. Since it has a lock mechanism at the time of connection, the connector can be securely connected and fixed.

• Volume Discount

• UL
• MIL
• For Signal
• Solder
• Gold Plated
• Lever Lock

CAD ：

2D

Centronics Solder Spring-lock Connector (Female)

MISUMI

[Features]A Centronics connector for relay with a lineup of low-priced products. This connector is used for wire-to-wire connection with a male connector by attaching cable with solder.

• Volume Discount

• For Signal
• Connection between Boards
• Printer
• Solder

CAD ：

2D

MR Series

HONDA TSUSHIN KOGYO

Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.[Features]· Dual screw and a spring lock mechanism that can withstand any shock.· Dust-proof mechanism with excellent environmental resistance.· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.· A relay type case is also provided

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.[Features]·Robust and ideal for interfaces due to the metal shell and metal case.·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.·For FCC and other EMI countermeasures.·Live line connection (3 steps) is also available.·Ideal for horizontal, parallel and vertical connections.·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.[Applications]·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

SUMICON 1600 Series Multi-Contact Rectangular Connector

HIROSE ELECTRIC

A rectangular multi-contact connector manufactured using a unique HIROSE design.[Features]· Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.· Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.· The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.· These connectors are specified in the NTT specifications, “Spec. No. 1931.”

Solder/Machine Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with adoption of machine contacts, dimple processing and plated pin finishing

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Centronics Solder Screw-lock Connector (Panel Mountable Female)

MISUMI

Panel Mount Centronics Connector with Screw-lock

• Volume Discount

• Connection between Boards
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

MIL Connector PCB Straight Male Connector (BOX Model)

MISUMI

[Features]OMRON BOX type MIL straight male connector for circuit board mounting. It can be used for circuit boards of various factory automation equipment. Compared to circuit board mounting male connectors with levers, this connector is much smaller as it has no lever, making it very convenient for circuit board wiring in small devices. The widely used 2.54 mm pitch arrangement makes it compatible with commercially available universal circuit boards, etc.

• Volume Discount

• UL
• MIL
• Solder

CAD ：

2D

Mini Delta Ribbon (MDR) System Wiremount Solder Plug

3M

[Features]· The MDR system consists of “industry standard product” half pitch I/O connectors.· Use of pre-loaded cantilever contacts ensures high reliability, requires little insertion and withdrawal strength and prevents twisting.· Accommodates a wide range of cable sizes from AWG#24 to AWG#30.· Solder wiring method that does not require special jigs or tools.· Solder heat resistance of 360°C for 10 seconds comparable to conventional connectors.· Unique contact shape that takes soldering workability into consideration.[Applications]· For cable connections between equipment.· Accommodates a wide range of cable sizes and ideal for solder wiring without special jigs or tools.

Solder and Machine Contact D-Sub Connector (High Current)

MISUMI

Made by ERNI in Germany. High-current capacity model supporting up to 20 A

• Volume Discount

• For Power Supply
• Connection between Boards
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Small, Rectangular Interface Connector, 3200 Series

HIROSE ELECTRIC

This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.[Features]• A receptacle connector board implementation surface with a height of the 2.9 mm.• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.• This receptacle connector can also be prepared in an embossed packaging product format.• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.• A latch lock is applied to both sides for mating processes.• This lock is implemented with the minimum space possible, and helps downsize your product set.• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.• The number of pins available is either 8 or 10.

FCN connector Solder type female connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

• Volume Discount

• Solder
• Gold Plated
• Screw Lock

1‑mm Pitch Board-To-Cable Connector For LVDS Signals, FX15 Series

HIROSE ELECTRIC

A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

57E Series Noise Suppression Soldering Plug Connector

DDK

[Features]· 57E series connectors correspond to plugs of the 57 series 57-30 type (straight plug with cable hood) with noise suppression used to avoid the effects of interference.

CAD ：

2D

RS Pro D-sub connector (solder terminal) female

RS Pro

RS Pro brand. High-quality solder D-sub connector.

RS Pro D-sub connector (Solder terminal)

RS Pro

RS Pro brand. High-quality solder D-sub connector.

Solder Spring-lock Centronics Connector (PCB Angle Male)

MISUMI

General-Purpose, Angle, Centronics Connector for PCB Mounting

• Volume Discount

• For Signal
• Connection between Boards
• Space-saving
• Printer

PCR Half Pitch Solder Female Connector

MISUMI

Half-pitch Model PCR Solder Model Connector

• For Signal
• PLC
• EMI Countermeasure
• Solder
• Gold Plated

CAD ：

2D

PCS Series

HONDA TSUSHIN KOGYO

Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors[Features]· Board to cable types available in 20 to 96 cores.• Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.· Soldered types also available.▪ For EMI measures other than FCC.• Built with a durable structure for use as an interface.· Quick lock using a metal lock spring.· Those for panel relays are also available.· Accessories for preventing incorrect insertion are also available.· A wide range of core numbers, from 34 to 150, are also available for board to board.• Specifically designed for smooth insertion and extraction, even when using multiple cores.• Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

1.78‑mm Pitch Rectangular Interface Connector QM Series

HIROSE ELECTRIC

Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.[Features]· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

DeviceNet Compliant Connector, HR31 Series

HIROSE ELECTRIC

These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.[Features]· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.· Snap-lock: The snap-lock feature creates a tactile click when mating.· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.· Designed to allow for removal by ⌀1 mm pin when improperly wired.· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.[Features]・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

Long-Life, Small, Rectangular Interface Connector, 3500 Series

HIROSE ELECTRIC

This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.[Features]• This connector has a long service life and can be inserted and removed up to 20,000 times.• The terminal structure has high reliability, and is a 2-point contact bellows type.• In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.• By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.• Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.• The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.• Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.• The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.• Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.• Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.

Ultra Low-profile Rectangular Interface Connector, LX Series

HIROSE ELECTRIC

An ultra-low-profile interface connector with a mounting height of 2.0 mm. While being ultra low-profile, provides toughness and excellent contact reliability, contributing to the slimming of devices.In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

4-mm Pitch Card Edge Connector 1150N Series

KEL

Card edge connector for industrial equipment, using tongue-type contacts to achieve stable contact.

Half-Pitch 1.27-mm Interface Connector, DF02 Series

JAPANAVIATION

[Features]・ The DF02 series is an interface connector standardized for the industrial equipment market and is half pitch (1.27) compatible.・This product uses a lightweight resin material for the hood, and gives full consideration to EMI by using a nickel-plated shield.・Further, the single-action lock format is used to provide excellent operability.

17JE Series

DDK

[Features]・ Solder cup type contact, hand-soldered connection connector.・ They are available in 9, 15, 25 and 37 position configurations.・ A stranded wire of 22 AWG or smaller is most suitable. (Use a soldering iron of 40 W or less when soldering)・ The surface treatment of the metal shell is Ni plating, and the pin connector tip is rounded.・ The cable/plug connection can be shielded by a metallized hood, which is effective as an EMI countermeasure.