Square Connectors（Wire connection method：Pressure Welding）

HIF3B Series MIL Standard-Compliant Ribbon Cable Connector

HIROSE ELECTRIC

MIL standard-compliant rectangular ribbon cable connector.[Features]· HIF3B series products are developed to comply with the MIL standard and can be used in a wide range of applications.· Compatible with HIF3 series.· HIF3B series products are UL-listed connectors.· Features a mechanism to prevent mis-insertion.· A form in which inserting the guide key (polarity key) on the pin header side creates a convex section that fits into the concave section (polarity keyway) of the socket. (MIL standard)· A form in which the mis-insertion prevention guide (polarity guide) on the socket side fits into the slot (polarity slot) on the pin header side.· A system that embeds the polarizing key in the socket hole and guides it.· A guide system in which the convex section on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.· The compatible wire (UL2651) is an AWG#28 ribbon cable (7-core/0.127 mm, jacket diameter of 0.9 ± 0.2 mm).[Applications]· A wide variety of models are available, enabling use with a wide range of equipment.

DF11 Series 2‑mm Grid Double-Row Connector (UL/CSA Standard Certified Product)

HIROSE ELECTRIC

[Features]· The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.· Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.· Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.· Choose from gold or tin plating to match application. SMT-compatible products are also available.· Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.· Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).[Applications]· For all types of OA equipment, including copy machines and printers.

• Volume Discount

MIL Press-fit Female Connector (Without Lock)

MISUMI

MIL connector female pressure welding connector (without lock). HIF3 series connector widely used in Japan

• Volume Discount

• UL
• MIL
• For Signal
• Connection between Boards
• Solenoid Valve
• PLC
• Pressure Welding
• Gold Plated

CAD ：

2D

D-Sub, D02, D02-M15 Series

JAPANAVIATION

A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.[Features]・The D-sub connector is becoming the standard with its combination of pin and socket connector types.・Interchangeable with different connector types and commonly used accessories.・The shell joint shape has polarity, fully preventing accidental reverse insertion.・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

Half-Pitch Multi-Function 2-Piece Connector, FX2 Series

HIROSE ELECTRIC

Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

[Features]· A new type of connector in which IDC terminals are inserted into the case.· By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.· Terminals can be replaced after connection, providing excellent maintainability.· IDC part is protected by the case to provide a high level of reliability.· No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.· High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.· Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.[Applications]· Convenient for various types of wiring.· For all types of OA equipment, including copy machines and printers.

MELSEC-A/Q Series, MELSEC iQ-R Series CC-Link Wiring Connector

MITSUBISHI

Optional CC-Link family 40-pin connector.

IEEE1284 Half Pitch EMI Countermeasure Press-fit Male Connector

MISUMI

High-speed Transfer Supporting Pressure Welding Half-pitch I/O Connector

• Volume Discount

• For Signal
• PLC
• Motor
• EMI Countermeasure
• SCSI
• Pressure Welding
• Gold Plated
• Screw Lock
• One-Touch Lock

CAD ：

2D

Discrete Wire Press Connector - XG5 (Discrete Wire Press Connector)

OMRON

[Features]・ A solution to the troublesome nature of discrete wire connections has been found.・A press-fit socket connector for mating with MIL type plugs.・Uses a 2-slot press-fit structure and insulation barrel to enable reliable and high current (3A) discrete wire press-fit connections.・The use of a wide range of covers to fit the application allows you to keep saving space on wiring configurations and discrete wires.・Using the unique, easy locking lever, enables you to lock with an original (XG8B, XG8WL terminals) or box plug (XG4C).▪ UL standard (File No.E103202) certified products are used as standard (except for XG5S type).

Han, Industrial Connector Inserts, Accessory Q Series

HARTING

Han, Industrial Connector Inserts, Accessory Q Series

3A Compatible Ribbon Cable Connector, HIF4 Series

HIROSE ELECTRIC

Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.[Features]· Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.· With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.· With an automatic extraction lever with lock release, an extraction tool is not required.· Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).

Centronics Press-fit Spring-lock Connector (Male)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

• Volume Discount

• For Signal
• Connection in Boards
• Printer
• Pressure Welding
• Gold Plated

CAD ：

2D

Centronics Press-fit Spring-lock Connector (Female)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

• Volume Discount

• For Signal
• Connection in Boards
• Printer
• Pressure Welding
• Gold Plated

CAD ：

2D

Press-fit MIL Female Connector for Discrete Wires

MISUMI

Forms a pressure connection with bulk wires. Can be crimped easily with the dedicated tool

• Volume Discount

• UL
• CSA
• For Signal
• Pressure Welding
• Gold Plated

CAD ：

2D

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.[Features]·Robust and ideal for interfaces due to the metal shell and metal case.·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.·For FCC and other EMI countermeasures.·Live line connection (3 steps) is also available.·Ideal for horizontal, parallel and vertical connections.·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.[Applications]·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

D-Sub Connector (Ribbon Cable IDC Termination, Low-Profile), FDD Series

HIROSE ELECTRIC

A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.[Features]• Metal shell makes it compact and sturdy.• Connectors can be mounted on the chassis, or on the front or back sides of the panel.• Height of the wiring side is greatly reduced to facilitate more compact sets.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.

Half Pitch Interface Connector, DX Series

HIROSE ELECTRIC

I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.

Centronics EMI Countermeasure Spring-lock Press-fit Connector (Female)

MISUMI

57F Series Noise Countermeasure Product Centronics Female Connector

• Volume Discount

• Pressure Welding
• Gold Plated

CAD ：

2D

PCR Half Pitch Female Press-fit Connector

MISUMI

Half-pitch model PCR Pressure Welding Model Connector

• Pressure Welding
• Gold Plated

CAD ：

2D

D-Sub Connector (Ribbon Cable Insulation Displacement Connection Type) FD Series

HIROSE ELECTRIC

A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.[Features]· Has a metal shell and so is small and lightweight.· Connector mounting can be performed on the chassis, front or back, or one of the sides.· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.· A connection press can also be used.

Han, Industrial Connector, Insert, Accessory, E/ES/EEE Series

HARTING

Han, Industrial Connector, Insert, Accessory, E/ES/EEE Series

Low Cost Female MIL Connector Pressure Welding Contact Connector (without Lock)

MISUMI

MIL Connector, Female Pressure Welding Model (without Lock)

• Volume Discount

• MIL
• For Signal
• Pressure Welding

MIL Socket Pressure Welding Contact Female Connector (with Lock)

MISUMI

[Features]This is a space saving OMRON IDC connector. A new type of MIL socket connector with a locking lever built into the main body of female connector. Compared to conventional MIL socket connectors, it is easy to operate because it can be inserted and removed with one hand, making it suitable for use in locations where insertion and removal are frequent.

• Volume Discount

• UL
• MIL
• For Signal
• Space-saving
• Pressure Welding
• Lever Lock

IEEE1284 Half Pitch Press-fit/Panel Mountable Female Connector

MISUMI

[Features]A panel-mount half-pitch I/O connector manufactured by Sumitomo 3M. It is mounted on a panel and used to connect with a male connector.

• Volume Discount

• For Signal
• EMI Countermeasure
• Pressure Welding
• Gold Plated
• One-Touch Lock

CAD ：

2D

Miniature Delta Button (MDR) System Wire Mount Receptacle

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.▪ EMI/ESD countermeasure items.· Wired to 1.27-mm pitch flat cable by bulk pressure welding connection. Supports daisy chain connections by intermediate pressure welding connection.· Tough structure based on a die-cast lock stand.• M2.5 is also available for fixed screw sizes corresponding to ISO standards.

Han-Modular Series Modules【2 Pieces Per Package】

HARTING

It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).

Han, Insert, Hood/Housing, Accessory for Industrial Connectors

HARTING

Han, insert, hood/housing, accessory for industrial connectors.

Han, Industrial Connector, Insert, Outlet, D Series

HARTING

Han, Industrial Connector, Insert, Outlet, D Series

Han Module Waterproof Connector【2 Pieces Per Package】

MISUMI

Lightweight plastic connector with excellent environmental resistance

• Volume Discount

Pressure-welded/Press Contact D-Sub Connector

MISUMI

Pressure Welding model allows wires to be connected easily and strain-relieving mounting demonstrates strong tensile force

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Pressure Welding
• Gold Plated

CAD ：

2D

MIL connector IDC female connector (no lock)

MISUMI

[Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

• Volume Discount

• UL
• MIL
• For Signal
• Connection between Boards
• Solenoid Valve
• PLC
• Pressure Welding
• Gold Plated

MIL Press-fit Male Extension Connector

MISUMI

[Features]This is a male connector for IDC relay, manufactured by Hirose Electric. This is an IDC type connector that allows for batch IDC together with 1.27 mm pitch ribbon cable and wire-to-wire connection with MIL standard connectors (HIF3 B connectors). Since it has a locking mechanism after joining, it will not come off even if some pulling force is applied.

• Volume Discount

• UL
• MIL
• Caulking
• Gold Plated
• Lever Lock

CAD ：

2D

Miniature Low-Profile Interface DN Connector

HIROSE ELECTRIC

This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular[Features]· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.· The single-action lock mechanism provides excellent operability.· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.· The dip connector includes a snap (circuit board temporary joint) bracket.· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.· Depending on the application, cable can be extracted in either the vertical or horizontal direction.

Han, Industrial Connector, Insert, Accessory, 70 A / 100 A / 200 A Series

HARTING

Han, Industrial Connector, Insert, Accessory, 70 A / 100 A / 200 A Series

Centronics EMI Countermeasures Pressure Welding Type Connector (Male)

MISUMI

PCR Half Pitch Male Press-fit/Panel Mountable Connector

MISUMI

Half-pitch PCR Panel Mounted Connector

• Pressure Welding
• Gold Plated

CAD ：

2D

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.[Features]・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

Half Pitch Interface Connector, DXM Series, Rectangular

HIROSE ELECTRIC

This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

Long-Life, Small, Rectangular Interface Connector, 3500 Series

HIROSE ELECTRIC

This small interface connector includes a lock, and has excellent performance, holding up for 20,000 insertion and removal cycles in testing.[Features]• This connector has a long service life and can be inserted and removed up to 20,000 times.• The terminal structure has high reliability, and is a 2-point contact bellows type.• In response to forceful pulling on the lock, the unit unlocks utilizing the "snap lock method." This makes the connector resistant to damage from outside forces pulling on the cable unexpectedly.• By pushing the button on the left or right side of the plug, you can easily unlock the cable, and because there's an audible "clicking" sound when the cable locks in place, you can be absolutely sure that it is locked.• Small and lightweight (the 16-core receptacle is approximately 2 g), effective for size and reduction of terminal equipment.• The new boxes and metal shell bending structure utilized function as EMI measures, and the connector itself is durable.• Just push a button and EDS measures are complete through the utilization of an over-molded plug cover.• The circuit board implementation method uses a 0.8-mm pitch row with the SMT method, so implementation is easy.• Conforms to circuit board with t values of 0.81 to 1.6 mm, giving users an extensive selection of circuit boards.• Two types of wire connection methods on the plug side are available. One is a pressure welded type for wire connection labor reduction, and the other is a solder type with arbitrary cable type selection available.

In-Line Type Ribbon Cable Connector (HIF3B Relay Type)

HIROSE ELECTRIC

Can be used for cable-to-cable wiring inside machinery. The HIF3B series socket is also compatible with the HIF3A series.

3M^TM Delta Connector for 1.27-mm Pitch Flat Cable

3M

[Features]· Compatible with 1.27-mm pitch flat cables and round cables with processed flat tips.· Also supports connection by bulk pressure welding and daisy chains.· Low-profile design.

3M^TM Miniature Delta Ribbon (MDR) System Non-Shielded Plug

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.· A bulk pressure welding structure—by proprietary 'hill & dale' method—on 0.635-mm pitch flat cable.· Compatible with daisy chain connections using intermediate pressure welding connection.· Low-profile design using strain relief—which also serves as a single-action lock.· Optimally suited for expanding bus signals by MDR within the device.

3M^TM Miniature Delta Ribbon (MDR) System Plug

3M

[Features]· Half-pitch I/O connector "Industry Standard Product" MDR system.· Low insertion removal force and torsion countermeasures through use of pre-force style cantilever contact ensures high reliability.· Efficient wiring connection by bulk pressure wiring.· Assorted wiring harness tools are available.· Compatible with assorted shell kits.

57FE Series Pressure Welded Type Flat Cable

DDK

[Features]• The 57FE series is a flat cable pressure-welded connector that has fittings covered by a metal shell, which is a countermeasure for electromagnetic radiation that helps reduce noise.• Basic varieties include 10, 20, 30, and 40 types.

CAD ：

2D

Half-Pitch 1.27-mm Interface Connector, DF02 Series

JAPANAVIATION

[Features]・ The DF02 series is an interface connector standardized for the industrial equipment market and is half pitch (1.27) compatible.・This product uses a lightweight resin material for the hood, and gives full consideration to EMI by using a nickel-plated shield.・Further, the single-action lock format is used to provide excellent operability.