Multi-Function Square End Mills (Carbide)（work material：Quenched and tempered steel）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 38	-	4 ～ 20	4	45 ～ 125	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: 518,387 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model

  MISUMI

  Introducing a regular type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	4 ～ 48	-	4 ～ 12	4	45 ～ 105	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: 516,667 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XCP Coated Carbide Square End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Stub Type / Blade Length 2.5D Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· Corresponds to cutting in both longitudinal and lateral directions, allowing a single unit to be used to machine complicated shapes.

  • Volume Discount

  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 12	5 ～ 30	-	3 ～ 12	3	50 ～ 100	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: 991,100 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·This product has an intermediate flute length between TSC-HEM3S (short flute length) and TSC-HEM3R (regular flute length), so it is called "SR flute length."·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	3	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-Flute Super One-Cut End Mill DV-SOCS3

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	8 ～ 38	-	6 ～ 20	3	60 ～ 125	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Side / Groove / Plunging (Z feed)	-	Sharp Edge	Square

  From: 1,125,821 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model

  MISUMI

  The new "standard" square end mill with 45° spiral is available at an ultra-low price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 26	-	4 ～ 12	3	45 ～ 100	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: 502,956 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	8 ～ 38	-	6 ～ 20	4	60 ～ 125	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Side / Groove	TiAlN	Sharp Edge	Square

  From: 1,391,163 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model

  MISUMI

  Introducing a long type with 45° spiral in the popular XAL Series

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	5 ～ 60	-	4 ～ 12	4	45 ～ 105	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Square

  From: 647,254 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill KSV-2

  KYOWA SEIKO

  Tip angles 30°, 45°, 60°, 70°, 80°, 90°, and 120° with small sizes (φ0.5 to φ6) are available.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  0.5 ～ 6	1 ～ 12	-	3 ～ 6	2	40 ～ 70	Quenched and tempered steel[○]	Standard torsion (30-40°)	Side / Groove / Plunging (Z feed) / Countersinking	Non-Coated	-	-

  From: 1,446,282 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface (product in Fig. 3 only)·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	3.5 ～ 30	30 ～ 140	6 ～ 20	3	80 ～ 200	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: 1,659,215 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 72	4 ～ 20	4	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·This product has an intermediate flute length between TSC-HEM4S (short flute length) and TSC-HEM4R (regular flute length), so it is called "SR flute length."·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	5 ～ 40	22 ～ 78	6 ～ 16	4	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Due to the unique chip gullet shape, groove cutting can be performed with a cutting depth comparable to that of a 2-flute.·By applying rounded blade to the rear end of the flute, it suppresses processing streaks that occur during multi-stage processing of the side surface. (product in Fig. 3 only)·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 22	3.5 ～ 30	30 ～ 140	6 ～ 20	4	80 ～ 200	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  From: 1,281,371 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE3 High-Helix End Mill, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  3-flute type with high-torsion grooves enables everything from rough machining to finishing

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 880,316 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid end mill SEM4 type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 12	6.5 ～ 25	-	4 ～ 12	4	40 ～ 75	Quenched and tempered steel[◎]	Standard torsion (30-40°)	Side / Groove	TiAlN	Sharp Edge	Square

  From: 301,374 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Center V End Mill (with Rounded Tip) KSVRA-2

  KYOWA SEIKO

  [Features]A carbide end mill with 2 flutes suitable for general steel, stainless steel, and other workpieces.The R-shaped tip can be used for 3D machining and rounding.The high cutting speed and high production efficiency lead to overall production cost reduction.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 6	2 ～ 12	-	4 ～ 6	2	50 ～ 60	Quenched and tempered steel[○]	Standard torsion (30-40°)	Side / Groove / Plunging (Z feed) / Countersinking	TiAlN	-	-

  From: 2,327,389 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 12	1.5 ～ 18	14 ～ 68	6 ～ 12	3	60 ～ 100	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	3 ～ 38	18 ～ 73	4 ～ 20	3	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	3	60 ～ 130	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	3	60 ～ 150	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·By adopting stub flute length that is 1.5 times longer than the cutting diameter, it is possible to machine the bottom surface while suppressing chattering·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 16	1.5 ～ 24	14 ～ 74	6 ～ 16	4	60 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, delivery times, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  1 ～ 20	4 ～ 56	26 ～ 92	6 ～ 20	4	60 ～ 130	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·The unique chip gullet shape enables groove cutting with a depth of cut equivalent to that of a 2-flute cutting tool·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·The 45° helix angle makes it ideal for high-speed machining compared to general-purpose 30° helix angle·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	5 ～ 75	30 ～ 112	6 ～ 20	4	60 ～ 150	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Sharp Edge / With Lead	Square

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model

  MISUMI

  Demonstrates phenomenal performance in processing the difficult-to-cut SUS304

  • Volume Discount

  • TS
  • SUS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 16	7 ～ 35	-	6 ～ 16	3	60 ～ 105	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts / Countersinking	For High Hardness (Silicon Group)	C plane	Square

  From: 1,716,768 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model

  MISUMI

  Ideal for the standing-wall finish of stainless steel

  • Volume Discount

  • TS
  • SUS
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	10.5 ～ 38	-	6 ～ 12	3	60 ～ 100	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Square

  From: 2,370,486 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill

  MISUMI

  MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 26	-	6 ～ 12	4	60 ～ 100	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: 831,966 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° square end mill with a long contact surface between work material and blade that provides a long tool life.

  • Volume Discount

  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	4.5 ～ 18	-	3 ～ 12	4	40 ～ 80	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	With Lead	Square

  From: 739,350 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Square End Mill

  MISUMI

  [Features]·Demonstrates high performance in processing general steel, SUS304, and heat-treated steel (up to 50 HRC)·Suppresses chattering with unequal lead and unequal flutes·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Stable machining is possible while maintaining finished surface accuracy·Coating with excellent lubricity provides stable abrasion resistance and improves shape accuracy of workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electrical tool setter.)·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  2 ～ 20	6 ～ 45	-	6 ～ 20	4	50 ～ 100	Quenched and tempered steel[◎]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: 865,528 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)

  MISUMI

  [Features]・Adopts unequal leads to suppress chatter and achieve high efficiency machining・Optimum groove shape realizes smooth chip discharge・Minimum electrical conductivity・Can be re-polished.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	8 ～ 38	-	6 ～ 25	4	57 ～ 104	Quenched and tempered steel[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: 857,445 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)

  MISUMI

  [Features]·Chattering is suppressed by unequal leads and unequal flutes. Stable machining is possible while maintaining finished surface accuracy·Ultra-fine grain cemented carbide base material is used. Coating with excellent adhesion and heat resistance enables processing under high-speed conditions·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	7 ～ 26	-	6 ～ 20	4	54 ～ 92	Quenched and tempered steel[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	-	-	Square

  From: 762,567 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HGGCNXS HG Coated Carbide NX Short Blade

  SANKO MFG

  Chip discharge is excellent and high speed machining is possible. A short blade which has adopted a new standard considering usability of the blade length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	13 ～ 38	-	6 ～ 20	4	50 ～ 110	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	High Helical

  From: 1,070,078 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HGGCNX HG Coated Carbide NX

  SANKO MFG

  [Features]· Newly developed coating and new shape achieve a long life.· Excellent chip discharge.· Capable of high-speed machining.· A new standard considering usability of the blade length is adopted.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 62	-	3 ～ 25	3 ～ 4	50 ～ 140	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	High Helical

  From: 1,336,536 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCXF SA Coated Carbide for GCX Groove

  SANKO MFG

  An end mill with excellent rigidity which makes it ideal for groove machining. Side processing is also possible.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	3 ～ 4	50 ～ 140	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	High Helical

  From: 1,733,331 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCX SA Coated 6-Flute Carbide End Mill

  SANKO MFG

  [Features]· Excellent rigidity; ideal for high-speed machining.· Achieves precision finishing with little tilt.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 32	10 ～ 65	-	6 ～ 32	6	50 ～ 160	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	High Helical

  From: 1,752,456 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCXL SA Coated Carbide 6-Flute Long Blade

  SANKO MFG

  Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. Enables a wide range of side machining, due to the long flute length.[Features]· SAGCX long blade end mill.· Machining is possible with a wide range of materials, from raw materials to hardened steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 30	15 ～ 100	-	6 ～ 25	6	70 ～ 200	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Side	TiAlN	With Lead	High Helical

  From: 2,494,797 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCXLS SA Coated Carbide 6-Flute Long Shank

  SANKO MFG

  Excellent rigidity; ideal for high-speed machining. Achieves precision finishing with little tilt. The long shank allows for machining in deep sections.[Features]· SAGCX long blade, long shank end mill.· Deep sections can be machined

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 30	12 ～ 55	-	6 ～ 25	6	80 ～ 200	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	High Helical

  From: 2,402,929 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4 High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  It is an end mill that can machine from non-ferrous materials to steel materials with a high-helix flute that reduces cutting force.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	4	45 ～ 120	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 880,316 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  End mill that enables high-speed cutting and heavy-duty cutting with a unique reinforced flute type. High hardness material can be machined by adopting OK hard coat

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	4	45 ～ 105	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	For High Hardness (Silicon Group)	Sharp Edge	High Helical

  From: 956,811 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  High-helix groove with a long flute length enables to machine wide side surfaces and deep places.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	4	70 ～ 150	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 1,358,411 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  High-helix groove with a long flute length enables to machine wide side surfaces and deep places.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 80	-	6 ～ 20	4	70 ～ 150	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: 1,817,383 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated

  OKAZAKI SEIKO

  [Features]A slim shank high helical end mill made of cemented carbide, 4 flutes.It is resistant to chipping and can be used in a wide range of applications, from general steel to stainless steel.The slim shank design allows for flexible adjustment of the protrusion length.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 22	8 ～ 32	-	4 ～ 20	4	70 ～ 150	Quenched and tempered steel[○]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	Non-Coated	Sharp Edge	High Helical

  From: 1,434,906 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated

  OKAZAKI SEIKO

  The reverse design eliminates the risk of shank interference during mold pocket machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 22	12 ～ 32	-	6 ～ 20	4	80 ～ 150	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: 2,505,840 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated

  OKAZAKI SEIKO

  Versatile 3-flute high-helix end mill that can handle roughing to finishing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	6 ～ 20	3	45 ～ 105	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Countersinking	TiAlN	Sharp Edge	High Helical

  From: 669,955 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated

  OKAZAKI SEIKO

  With a high-helix flute with reduced cutting force, it achieves a finished surface with little runout.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 50	-	6 ～ 25	4	45 ～ 120	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Plane / Side / Countersinking	TiAlN	Sharp Edge	High Helical

  From: 669,955 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 22	9 ～ 35	-	5 ～ 20	4	120 ～ 220	Quenched and tempered steel[◎]	Powerful Torsion (45°-60°)	Side	TiAlN	Sharp Edge	Square

  From: 2,062,888 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	DIJET	MISUMI	DIJET	MISUMI	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	OKAZAKI SEIKO	DIJET	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET
Product SeriesDòng sản phẩm	XAL series carbide multi-functional square end mill, 4-flute, 45° torsion / short model	(Economy series) XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model	XCP Coated Carbide Square End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Stub Type / Blade Length 2.5D Type	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / SR Flute Length	3-Flute Super One-Cut End Mill DV-SOCS3	XAL series carbide multi-functional square end mill, 3-flute, 45° torsion / short model	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length)	XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model	Carbide Center V End Mill KSV-2	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long shank, short model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / SR Flute Length model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long shank, short model	SEE3 High-Helix End Mill, 3-Flute, Non-Coated	Solid end mill SEM4 type	Carbide Center V End Mill (with Rounded Tip) KSVRA-2	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / short model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 3-flute, 45° spiral / long model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / stub model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / regular model	TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / long model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model	TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model	TSC Series Carbide Multi-Functional Square End Mill, 4-Flute / 45° Spiral / Short Type / Plunge Z Mill	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Stub Type	VAC Series Carbide 4-Flute Uneven Lead Square End Mill	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)	VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)	HGGCNXS HG Coated Carbide NX Short Blade	HGGCNX HG Coated Carbide NX	SAGCXF SA Coated Carbide for GCX Groove	SAGCX SA Coated 6-Flute Carbide End Mill	SAGCXL SA Coated Carbide 6-Flute Long Blade	SAGCXLS SA Coated Carbide 6-Flute Long Shank	SEE4 High-Helix End Mill, 4-Flute, Non-Coated	SEE4GH Ultra-Strong Mill, 4-Flute, OK Hard Coated	SEE4L Long High-Helix End Mill, 4-Flute, Non-Coated	SEE4LA Long High-Helix End Mill, 4-Flute, OK Coated	SEE4TL Reverse High-Helix End Mill, 4-Flute, Non-Coated	SEE4TLA Reverse High-Helix End Mill, 4-Flute, OK Coated	SPSEE3A SP Series High Helix End Mill 3-Flute OK Coated	SPSEE4A SP Series High Helix End Mill 4-Flute OK Coated	Super One-Cut End Mill DZ-SOCLS4 Type (Regular Blade Length) (Long Shank)
From	518,387 VND Special Price On Sale Till 31/03/2025	516,667 VND	991,100 VND		1,125,821 VND	502,956 VND	1,391,163 VND	647,254 VND	1,446,282 VND	1,659,215 VND			1,281,371 VND	880,316 VND	301,374 VND	2,327,389 VND								1,716,768 VND	2,370,486 VND	831,966 VND	739,350 VND	865,528 VND	857,445 VND	762,567 VND	1,070,078 VND	1,336,536 VND	1,733,331 VND	1,752,456 VND	2,494,797 VND	2,402,929 VND	880,316 VND	956,811 VND	1,358,411 VND	1,817,383 VND	1,434,906 VND	2,505,840 VND	669,955 VND	669,955 VND	2,062,888 VND
Days to ShipSố ngày giao hàng	Same day or more	Same day or more	4 Day(s) or more	Same day or more	6 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	Same day or more	Same day or more	4 Day(s) or more	4 Day(s) or more	10 Day(s) or more	6 Day(s) or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	7 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	XAL General Steel 4 Flutes		High-Hardness Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes SR		XAL General Steel 3 Flutes				TS General Steel 3 Flutes S (Short)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes SR	TS General Steel 4 Flutes S (Short)				TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 3 Flutes L (Long)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes L (Long)	TS SUS 3 Flutes S (Short)	TS SUS 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	High-Hardness Steel 4 Flutes B (Stub)
Blade diameter (D)(φ)	2 ～ 20	1 ～ 12	2 ～ 12	3 ～ 16	3 ～ 20	1 ～ 12	3 ～ 20	1 ～ 12	0.5 ～ 6	2 ～ 20	1 ～ 20	3 ～ 16	2 ～ 22	3 ～ 20	2 ～ 12	1 ～ 6	1 ～ 12	1 ～ 20	1 ～ 20	2 ～ 20	1 ～ 16	1 ～ 20	2 ～ 20	3 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	2 ～ 20	3 ～ 25	3 ～ 20	5 ～ 20	3 ～ 25	3 ～ 25	3 ～ 32	3 ～ 30	6 ～ 30	3 ～ 25	3 ～ 20	3 ～ 20	3 ～ 20	5 ～ 22	7 ～ 22	3 ～ 20	3 ～ 25	6 ～ 22
Blade length (ℓ)(mm)	5 ～ 38	4 ～ 48	5 ～ 30	5 ～ 40	8 ～ 38	1.5 ～ 26	8 ～ 38	5 ～ 60	1 ～ 12	3.5 ～ 30	3 ～ 38	5 ～ 40	3.5 ～ 30	10 ～ 45	6.5 ～ 25	2 ～ 12	1.5 ～ 18	3 ～ 38	4 ～ 56	5 ～ 75	1.5 ～ 24	4 ～ 56	5 ～ 75	7 ～ 35	10.5 ～ 38	8 ～ 26	4.5 ～ 18	6 ～ 45	8 ～ 38	7 ～ 26	13 ～ 38	10 ～ 62	10 ～ 50	10 ～ 65	15 ～ 100	12 ～ 55	10 ～ 50	10 ～ 45	15 ～ 80	15 ～ 80	8 ～ 32	12 ～ 32	10 ～ 45	10 ～ 50	9 ～ 35
Underneck length (ℓ1)(mm)	-	-	-	22 ～ 78	-	-	-	-	-	30 ～ 140	18 ～ 72	22 ～ 78	30 ～ 140	-	-	-	14 ～ 68	18 ～ 73	26 ～ 92	30 ～ 112	14 ～ 74	26 ～ 92	30 ～ 112	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	4 ～ 20	4 ～ 12	3 ～ 12	6 ～ 16	6 ～ 20	4 ～ 12	6 ～ 20	4 ～ 12	3 ～ 6	6 ～ 20	4 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	4 ～ 12	4 ～ 6	6 ～ 12	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 16	6 ～ 12	6 ～ 12	3 ～ 12	6 ～ 20	6 ～ 25	6 ～ 20	6 ～ 20	3 ～ 25	6 ～ 25	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	5 ～ 20
Number of flutes(sheet)	4	4	3	3	3	3	4	4	2	3	4	4	4	3	4	2	3	3	3	3	4	4	4	3	3	4	4	4	4	4	4	3 ～ 4	3 ～ 4	6	6	6	4	4	4	4	4	4	3	4	4
Overall Length (L)(mm)	45 ～ 125	45 ～ 105	50 ～ 100	60 ～ 110	60 ～ 125	45 ～ 100	60 ～ 125	45 ～ 105	40 ～ 70	80 ～ 200	60 ～ 110	60 ～ 110	80 ～ 200	45 ～ 105	40 ～ 75	50 ～ 60	60 ～ 100	60 ～ 110	60 ～ 130	60 ～ 150	60 ～ 110	60 ～ 130	60 ～ 150	60 ～ 105	60 ～ 100	60 ～ 100	40 ～ 80	50 ～ 100	57 ～ 104	54 ～ 92	50 ～ 110	50 ～ 140	50 ～ 140	50 ～ 160	70 ～ 200	80 ～ 200	45 ～ 120	45 ～ 105	70 ～ 150	70 ～ 150	70 ～ 150	80 ～ 150	45 ～ 105	45 ～ 120	120 ～ 220
work material	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[○]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]	Quenched and tempered steel[◎]
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	-	-	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
Machining Application	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Inclined Cuts	Side / Groove	Plane / Side / Inclined Cuts	Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Countersinking	Side / Groove	Side / Groove / Plunging (Z feed) / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Countersinking	Side
Coating	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	TiAlN
Blade tip shape	With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge	With Lead	Sharp Edge	With Lead	-	With Lead	Sharp Edge / With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge	Sharp Edge	-	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	C plane	C plane	With Lead	With Lead	-	-	-	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge
Type	Square	Square	Square	Square	Square	Square	Square	Square	-	Square	Square	Square	Square	High Helical	Square	-	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	High Helical	Square

Loading...Tải…