(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
Filter By |
|
CAD |
|
Days to Ship |
|
16 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 20 | - | - | 6 ~ 20 | 3 ~ 5 | - | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | - | Plane / Side / Groove / Inclined Cuts | TiAlN | - | Roughing |
From: 491,283 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat
OKAZAKI SEIKO
Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 25 | 12 ~ 45 | - | 4 ~ 25 | 4 | 50 ~ 120 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | Weak torsion (15 to 25˚) | Plane / Side / Groove | TiAlN | C plane | Roughing |
From: 1,396,658 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
XAC series carbide roughing end mill, fine pitch / regular model
MISUMI
Strongly supports the cost reduction of roughing with the limited special price for standard sizes
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 16 ~ 38 | - | 6 ~ 20 | 3 ~ 4 | 57 ~ 104 | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Weak torsion (15 to 25˚) | Plane / Side / Groove / Inclined Cuts | TiAlN | C plane | Roughing |
From: 1,478,634 VND |
---|
Special Price |
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Ideal for rough and medium finishing of materials from steel to stainless steel. High performance machining with BT30 machines is possible with little cutting resistance.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 13 ~ 38 | - | 6 ~ 20 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Roughing |
From: 2,135,194 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 13 ~ 38 | - | 6 ~ 20 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | With Lead | Roughing |
From: 2,136,177 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
OSG
As the corrugated blade shape reduces cutting power, large cutting depth is possible. Also resilient to chatter, it is possible to improve the efficiency of roughing.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
14 ~ 25 | 26 ~ 45 | - | 12 ~ 25 | 4 ~ 6 | 85 ~ 120 | general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○] | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Plane / Side / Inclined Cuts | TiAlN | C plane | Roughing |
From: 4,584,231 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
FAGCNα, FA Coated Carbide Nα Nick
SANKO MFG
[Features]· Machining is possible with a wide range of materials, from raw materials to hardened steel.· New shape and new surface processing provide excellent chipping resistance and chip discharge.· A new standard considering usability of the blade length is adopted.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 25 | 10 ~ 62 | 22 ~ 57 | 3 ~ 25 | 3 ~ 4 | 50 ~ 140 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | C plane | Roughing |
From: 2,261,626 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SAGCVα SA Coated Carbide Victory α Nick
SANKO MFG
[Features]· Machining is possible with a wide range of materials, from raw materials to hardened steel.· Newly developed nick/cross-section shape provide excellent chipping resistance and chip discharge.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 20 | 13 ~ 38 | 18 | 6 ~ 20 | 4 | 50 ~ 110 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | C plane | Roughing |
From: 2,167,653 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SAGCα SA Coated Carbide α Nick
SANKO MFG
[Features]· With a unique roughing blade shape, heavy machining and high speed machining are possible
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 25 | 15 ~ 60 | 22 ~ 55 | 6 ~ 25 | 4 | 60 ~ 140 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | Standard torsion (30-40°) | Plane / Side / Groove / Inclined Cuts | TiAlN | C plane | Roughing |
From: 2,481,550 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
4 ~ 25 | 8 ~ 50 | - | 6 ~ 25 | 3 ~ 4 | 55 ~ 130 | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] | Weak torsion (15 to 25˚) | Side / Groove | TiAlN | - | Roughing |
From: 4,788,828 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)
KYOCERA
·Roughing corrugated cutting edge·For coarse machining, the repertoire includes 3, 4, and 5 flutes.The sine curve cutting edge reduces cutting force.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 8 | 13 ~ 16 | - | 6 ~ 8 | 3 | 57 ~ 63 | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | Weak torsion (15 to 25˚) | Plane / Side / Groove | TiAlN | - | Roughing |
From: 1,842,672 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
3 ~ 25 | 8 ~ 50 | - | 6 ~ 25 | 3 ~ 5 | 50 ~ 100 | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] | Weak torsion (15 to 25˚) | Plane / Side / Groove / Inclined Cuts | TiAlN | - | Long-Neck Square |
From: 986,171 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
SPSRD3ZA
OKAZAKI SEIKO
A multi-purpose roughing end mill with the enhanced vertical feed performance of the Zakkuri Mill.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
5 ~ 20 | 12 ~ 40 | 15 ~ 36 | 6 ~ 20 | 3 | 50 ~ 105 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | Standard torsion (30-40°) | Side / Groove | TiAlN | - | Roughing |
From: 1,549,650 VND |
---|
Days to Ship: Số ngày giao hàng: 8 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Roughing End Mill, 4-Flute GM-4W
KABUSYUUKOUGU
GM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and features the reasonable balance with the good cutting quality. It can extend the tool lifespan.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 16 ~ 45 | - | 6 ~ 20 | 4 | 50 ~ 100 | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] | Standard torsion (30-40°) | Side / Groove | TiAlN | - | Roughing |
From: 500,571 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Go-riki Roughing End Mill 4-Flute / OK Coat Premium SRE4GA
OKAZAKI SEIKO
[Features]· Reduced cutting resistance and enhanced durability thanks to the synergistic effect of its unique vibration damping structure and OK coat
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
- | - | - | - | 4 | - | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | Powerful Torsion (45°-60°) | Plane / Side | TiAlN | - | Roughing |
From: 2,180,736 VND |
---|
Days to Ship: Số ngày giao hàng: 10 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Coated (TiAIN) Solid Carbide End Mills (4 Flutes) IC4RFE
THE CUT
[Features]· Outstanding cost performance.· Capable of machining a wide range of workpieces from raw materials up to alloy steel.· TiAlN coated for a longer tool life.· A 4-flute specification with stable machining performance.
Blade diameter (D)(φ) | Blade length (ℓ)(mm) | Underneck length (ℓ1)(mm) | Shank diameter (d)(mm) | Number of flutes(sheet) | Overall Length (L)(mm) | work material | Torsion Angle (θ) | Machining Application | Coating | Blade tip shape | Type |
---|---|---|---|---|---|---|---|---|---|---|---|
6 ~ 20 | 15 ~ 50 | - | 6 ~ 20 | 4 | 60 ~ 110 | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | Standard torsion (30-40°) | Side / Groove | TiAlN | - | Roughing |
From: 1,248,091 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
SpecificationsĐặc điểm kĩ thuật |
Blade diameter (D)(φ) |
Blade length (ℓ)(mm) |
Underneck length (ℓ1)(mm) |
Shank diameter (d)(mm) |
Number of flutes(sheet) |
Overall Length (L)(mm) |
work material |
Torsion Angle (θ) |
Machining Application |
Coating |
Blade tip shape |
Type |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | YG 1 | OKAZAKI SEIKO | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | SANKO MFG | SANKO MFG | SANKO MFG | DIJET | KYOCERA | YG 1 | OKAZAKI SEIKO | KABUSYUUKOUGU | OKAZAKI SEIKO | THE CUT |
Product SeriesDòng sản phẩm | XAC series carbide roughing end mill, fine pitch / regular model | High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium) | ||||||||||||||
From | 491,283 VND | 1,396,658 VND | 1,478,634 VND Special Price On Sale Till 31/03/2025 | 2,135,194 VND | 2,136,177 VND | 4,584,231 VND | 2,261,626 VND | 2,167,653 VND | 2,481,550 VND | 4,788,828 VND | 1,842,672 VND | 986,171 VND | 1,549,650 VND | 500,571 VND | 2,180,736 VND | 1,248,091 VND |
Days to ShipSố ngày giao hàng | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 4 Day(s) or more | 10 Day(s) or more | 6 Day(s) or more |
SpecificationsĐặc điểm kĩ thuật |
| |||||||||||||||
Blade diameter (D)(φ) | 3 ~ 20 | 5 ~ 25 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 14 ~ 25 | 3 ~ 25 | 5 ~ 20 | 5 ~ 25 | 4 ~ 25 | 5 ~ 8 | 3 ~ 25 | 5 ~ 20 | 6 ~ 20 | - | 6 ~ 20 |
Blade length (ℓ)(mm) | - | 12 ~ 45 | 16 ~ 38 | 13 ~ 38 | 13 ~ 38 | 26 ~ 45 | 10 ~ 62 | 13 ~ 38 | 15 ~ 60 | 8 ~ 50 | 13 ~ 16 | 8 ~ 50 | 12 ~ 40 | 16 ~ 45 | - | 15 ~ 50 |
Underneck length (ℓ1)(mm) | - | - | - | - | - | - | 22 ~ 57 | 18 | 22 ~ 55 | - | - | - | 15 ~ 36 | - | - | - |
Shank diameter (d)(mm) | 6 ~ 20 | 4 ~ 25 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 12 ~ 25 | 3 ~ 25 | 6 ~ 20 | 6 ~ 25 | 6 ~ 25 | 6 ~ 8 | 6 ~ 25 | 6 ~ 20 | 6 ~ 20 | - | 6 ~ 20 |
Number of flutes(sheet) | 3 ~ 5 | 4 | 3 ~ 4 | 4 | 4 | 4 ~ 6 | 3 ~ 4 | 4 | 4 | 3 ~ 4 | 3 | 3 ~ 5 | 3 | 4 | 4 | 4 |
Overall Length (L)(mm) | - | 50 ~ 120 | 57 ~ 104 | 50 ~ 100 | 50 ~ 100 | 85 ~ 120 | 50 ~ 140 | 50 ~ 110 | 60 ~ 140 | 55 ~ 130 | 57 ~ 63 | 50 ~ 100 | 50 ~ 105 | 50 ~ 100 | - | 60 ~ 110 |
work material | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] | general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] | general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] |
Torsion Angle (θ) | - | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) / Powerful Torsion (45°-60°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Powerful Torsion (45°-60°) | Standard torsion (30-40°) |
Machining Application | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Side / Groove | Side / Groove | Plane / Side | Side / Groove |
Coating | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
Blade tip shape | - | C plane | C plane | With Lead | With Lead | C plane | C plane | C plane | C plane | - | - | - | - | - | - | - |
Type | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Long-Neck Square | Roughing | Roughing | Roughing | Roughing |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy