Ball End Mills (Carbide)（work material：Titanium）

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	Titanium[○]	-0.007 to 0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 483,333 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230 MUGEN-COATING 2-Flute Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Supports precision 3D machining from low speed to high speed.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 110	Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / R Groove	TiAlN	Ball

  From: 569,109 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Ball 2GSR

  NACHI(FUJIKOSHI)

  Supports a wide range of materials from raw materials to hardened materials. Suitable for processing of curved surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5	15	-	10	2	100	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,050,211 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD-3

  OSG

  A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.Coated for steelStandard/Alteration category: Manufacturer's standard productNumber of flutes (pcs.) 2Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)R Accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.8 ～ 8	-	3	2	40	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,320,897 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBL230 MUGEN-COATING Long Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the long ball end mill.・ The size is R0.1 to R5.・ Machining that makes use of the long shank is possible.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 5	0.5 ～ 25	-	3 ～ 10	2	70 ～ 200	Titanium[○]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,022,867 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill

  NS TOOL

  The tuned Infinity coating sustains high precision machining for a long time

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.1 ～ 10	-	4 ～ 6	2	50 ～ 80	Titanium[○]	0.002～-0.002	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,083,728 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Long shank type allows machining in deep places. In addition, OK hard coat enables machining of hardened steel up to 65 HRC

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	Titanium[◎]	-	Curved surface / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,855,631 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 10	11 ～ 38	-	6 ～ 20	4	80 ～ 125	Titanium[○]	-	Curved surface	Other	Ball

  From: 2,131,718 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Short Ball End Mill 30° B222X

  7 LEADERS

  [Features]· 2-flute short ball end mill that supports a wide range of work materials.· Capable of continuous stable cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.15 ～ 10	0.6 ～ 38	-	4 ～ 20	2	50 ～ 100	Titanium[○]	±10	Curved surface / Engraving / R Groove	-	Ball

  From: 485,035 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Long Neck Hard Ball GSBNH2

  NACHI(FUJIKOSHI)

  [Features]· Ideal for fine machining of molds.· Available in various sizes and can be used for all kinds of machining.· Cutting blades with a tapered back make contact with a workpiece with a shorter length.· Tapered back for reduction of cutting resistance and achievement of good roughness of the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	-	4 ～ 6	2	45 ～ 120	Titanium[○]	-	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 813,042 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball Long Shank 2GEOLSR

  NACHI(FUJIKOSHI)

  [Features]A carbide end mill with 2 flutes.The high cutting speed and high production efficiency lead to overall production cost reduction.The long shank allows contouring at deep positions and can be lengthened to suit the application.[Applications]Suitable for side milling, curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	10 ～ 100	4 ～ 32	2	80 ～ 230	Titanium[○]	0～-0.04 ～ 0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,962,867 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mold Meister Ball 2MMR

  NACHI(FUJIKOSHI)

  Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	Titanium[○]	-0.003～+0.003	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 4,454,124 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball 2GEOR

  NACHI(FUJIKOSHI)

  Supports a wide range of applications from mold steel to high-hardness steel. Ideal for finishing molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	3 ～ 80	4 ～ 32	2	50 ～ 200	Titanium[○]	0～-0.04 ～ 0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,680,968 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ A wide range of machining from general materials to hardened steel is possible. The manufacturer can also support high-speed machining centers.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	2.5 ～ 55	-	4 ～ 25	2	50 ～ 180	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,561,288 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WX-EBD

  OSG

  A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.6	3	-	4	2	50	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 900,582 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXS-EBD

  OSG

  Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 18	2 ～ 10	4 ～ 12	2	50 ～ 110	Titanium[○]	-0.007～+0.007 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 553,333 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-HS-EBD

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.WXL coating with excellent lubricity and abrasion resistance. Can be used with a wide range of work materials and cutting applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.4 ～ 18	-	4 ～ 12	2	35 ～ 70	Titanium[○]	-0.007～+0.003 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 469,924 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-EBD-6

  OSG

  High-precision ball end mill for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers. Super ultra-fine particle carbide base metal realizes long life for hardened steel high-speed machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	1.1 ～ 9	6	2	50	Titanium[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,451,322 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Ball Type, 2-Flute FX-LS-MG-EBD

  OSG

  The long shank allows machining in deep sections

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3	12	-	6	2	140	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,348,954 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS

  OSG

  A ball end mill for heavy cutting that supports high speed and high efficiency (large cutting depth). The short overall length is a perfect fit for shrink and HSK.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 12	2.5 ～ 30	6 ～ 12	2	50 ～ 80	Titanium[○]	-0.015～+0.015 ～ -0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,407,650 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXE-HS-EBD

  OSG

  Ultra-high grade accuracy and precision ball end mill series for better craftsmanship. Short length that perfectly fits the HSK shrink holder. The product accuracy warranty sheet is included for HP3 specification types.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  4	8	16	8	2	60	Titanium[○]	-0.003～+0.003	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,185,873 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-HO-MG-EBD

  OSG

  The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	12 ～ 38	-	6 ～ 20	2	90 ～ 160	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,549,214 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FXS-HO-EBDS

  OSG

  A ball end mill for high hardness steel with a lubrication hole that maximizes the tool rigidity.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	6 ～ 20	-	6 ～ 20	2	90 ～ 160	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,716,032 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-PC-MG-EBD

  OSG

  Due to the highly rigid pencil neck, good cutting is possible even with a large tool runout.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.6 ～ 22	10 ～ 80	6 ～ 16	2	60 ～ 160	Titanium[○]	-0.01～0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,101,874 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-PC-EBD

  OSG

  [Features]· WXL coating with excellent lubrication and wear resistance. Can be used with a wide range of work materials and cutting applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.16 ～ 12	1 ～ 80	4 ～ 16	2	45 ～ 160	Titanium[○]	-0.005 to +0.005 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 805,371 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Pencil-neck Type, 2-Flute FX-PCL-EBD

  OSG

  It is a ball end mill for deep cutting that cannot be reached with ordinary end mills.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 6	8 ～ 22	100 ～ 140	10 ～ 16	2	200 ～ 250	Titanium[○]	-0.01～0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 9,290,082 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball-End Type, FXS-EQD

  OSG

  The spherical cutting edge prevents chattering even when processing vertical walls. Also allows undercut machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	0.7 ～ 8.1	5 ～ 60	6 ～ 12	2	60 ～ 110	Titanium[○]	-	Curved surface / Side / Engraving / R Groove	TiAlN	Spherical Ball

  From: 2,447,781 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball-End Type, 2-Flute For finishing FX-H-EBD

  OSG

  Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 12	2.5 ～ 30	6 ～ 12	2	50 ～ 80	Titanium[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,277,619 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB345 3-Flute Ball-End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "standard / machining category" of narrowing condition.[Features]・ High efficiency machining with less chattering is possible by adopting unique 3-flute shape and unequal division.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 20	-	6 ～ 12	3	60 ～ 120	Titanium[○]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,264,316 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)

  NS TOOL

  [Features]・ Short shank type. (Shrink fit)・ You can set many depths of cut and it is effective at high speed feed.・ Ball end mill designed for high speed and high hardness machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 15	4 ～ 6	2	35 ～ 45	Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 866,943 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Standard type ball end mill for high hardness. Ideal for finish machining・ Supports high hardness materials up to 68 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	Titanium[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 595,863 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH345 3-Flute Ball-End Mill for High-Hardness

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The MUGEN Coating Premium for high hardness and the unique new shape give the tool excellent chipping resistance, and reduced chattering improves the finished surface.・ Achieves stable and long lifespan with long-time machining in high hardness range (48 to 65 HRC). In pursuit of the cutting diamet...Readmore

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	1.5 ～ 10	-	6	3	60 ～ 80	Titanium[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: 1,697,886 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Short shank type (shrink fit) long neck ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.2 ～ 12	-	4 ～ 12	2	35 ～ 60	Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 632,060 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230S MUGEN-COATING Short Ball End Mill

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ High-stiffness design enables high speed machining without chattering.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.2 ～ 12	-	4 ～ 12	2	50 ～ 110	Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 812,648 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels

  NS TOOL

  [Features]・ Ball end mill designed for high speed and high hardness machining.・ Many cuts can be set, and it is effective at high speed feed.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 15	4 ～ 6	2	50 ～ 60	Titanium[○]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 975,335 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230

  NS TOOL

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ MUGEN coating is used for the extra long ball end mill. Machining that makes use of the long shank is possible.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 5	2.5 ～ 25	-	3 ～ 10	2	100 ～ 250	Titanium[○]	0.02～-0.02	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 3,007,321 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBE SA Coating Carbide 2-Flute Ball-Nose

  SANKO MFG

  [Features]· Machining is possible with a wide range of materials, from raw materials to hardened steel.· Also capable of high-speed machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 12.5	0.9 ～ 50	-	3 ～ 25	2	50 ～ 180	Titanium[○]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 1,659,132 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank

  SANKO MFG

  Machining is possible with a wide range of materials, from raw materials to hardened steel. The long shank allows for machining in deep sections.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 12.5	4.5 ～ 80	-	3 ～ 25	2	100 ～ 230	Titanium[○]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,340,513 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCBE4T SA Coated Carbide 4-Flute Ball

  SANKO MFG

  Machining is possible with a wide range of materials, from raw materials to hardened steel. 4-flute blade enables high-speed and high-efficiency machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	12 ～ 25	-	6 ～ 12	4	80 ～ 110	Titanium[○]	0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: 2,548,305 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL Ball End Mill GSXB20000 Type

  SUMITOMO ELECTRIC HARDMETAL

  Adopting low Co carbide base material improves rigidity and abrasion resistance at the same time. By adopting an ultra-smooth TiAlN diameter coat, abrasion resistance is improved and cutting force is reduced, enabling high-efficiency roughing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 4	0.9 ～ 12	1.2 ～ 4	4 ～ 8	2	50 ～ 90	Titanium[○]	±0.01	R Groove	For General Steels (AlCrN, etc.)	Ball

  From: 784,714 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LA Long Ball End Mill, 2-Flute, OK Coated

  OKAZAKI SEIKO

  [Features]A carbide long ball end mill with 2 flutes.The deep rib type prevents tool interference during deep cutting.The long shank allows for a wide range of die milling.[Applications]Suitable for curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	Titanium[○]	-	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: 1,654,018 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated

  OKAZAKI SEIKO

  Ball end mill with standard radius accuracy of ±10 μm that is suitable for machining a wide range of workpiece materials.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 55	-	4 ～ 25	2	60 ～ 180	Titanium[○]	-10～+10	Curved surface / Engraving / R Groove	TiAlN	Ball

  From: 449,735 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball (Slim Shank) DZ-OCUB

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	9 ～ 30	-	5 ～ 18	2	120 ～ 180	Titanium[○]	10～-10	Curved surface / R Groove	TiAlN	Ball

  From: 1,666,068 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Ball 03 DZ03-OCSB

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5	15	-	10	2	100	Titanium[○]	10～-10	Curved surface / R Groove	TiAlN	Ball

  From: 2,269,233 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Hard End Mill DV-OCSB

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	1.5 ～ 30	3 ～ 12.5	4 ～ 20	2	50 ～ 180	Titanium[○]	5～-5 ～ 10～-10	Curved surface / R Groove	TiAlN	Ball

  From: 767,250 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	NS TOOL	NACHI(FUJIKOSHI)	OSG	NS TOOL	NS TOOL	OKAZAKI SEIKO	SANDVIK	7 LEADERS	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	SANKO MFG	SANKO MFG	SANKO MFG	SUMITOMO ELECTRIC HARDMETAL	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET
Product SeriesDòng sản phẩm	Ball End Type, 2-Flute WXL-EBD	MSB230 MUGEN-COATING 2-Flute Ball End Mill	GS MILL Ball 2GSR	Ball End Type, 2-Flute FX-MG-EBD-3	MSBL230 MUGEN-COATING Long Ball End Mill	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)	Carbide 2-Flute Short Ball End Mill 30° B222X	GS MILL Long Neck Hard Ball GSBNH2	X's Mill Geo Ball Long Shank 2GEOLSR	Mold Meister Ball 2MMR	X's Mill Geo Ball 2GEOR	Ball End Type, 2-Flute FX-MG-EBD	Ball End Type, 2-Flute WX-EBD	Ball End Type, 2-Flute WXS-EBD	Ball End Type, 2-Flute WXL-HS-EBD	Ball End Type, 2-Flute FX-EBD-6	Long Shank Ball Type, 2-Flute FX-LS-MG-EBD	Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS	Ball End Type, 2-Flute WXE-HS-EBD	Ball End Type, 2-Flute FX-HO-MG-EBD	Ball End Type, 2-Flute FXS-HO-EBDS	Ball End Type, 2-Flute FX-PC-MG-EBD	Ball End Type, 2-Flute WXL-PC-EBD	Long Pencil-neck Type, 2-Flute FX-PCL-EBD	Ball-End Type, FXS-EQD	Ball-End Type, 2-Flute For finishing FX-H-EBD	MSB345 3-Flute Ball-End Mill	MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)	MSBH230 2-Flute Ball-End Mill for High-Hardness	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	MSB230S MUGEN-COATING Short Ball End Mill	MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels	MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230	SAGCBE SA Coating Carbide 2-Flute Ball-Nose	SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank	SAGCBE4T SA Coated Carbide 4-Flute Ball	GSX MILL Ball End Mill GSXB20000 Type	SBD2LA Long Ball End Mill, 2-Flute, OK Coated	SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated	One Cut Ball (Slim Shank) DZ-OCUB	One Cut Ball 03 DZ03-OCSB	One Cut Hard End Mill DV-OCSB
From	483,333 VND	569,109 VND	2,050,211 VND	2,320,897 VND	2,022,867 VND	1,083,728 VND	1,855,631 VND	2,131,718 VND	485,035 VND	813,042 VND	1,962,867 VND	4,454,124 VND	1,680,968 VND	2,561,288 VND	900,582 VND	553,333 VND	469,924 VND	2,451,322 VND	3,348,954 VND	2,407,650 VND	3,185,873 VND	3,549,214 VND	3,716,032 VND	3,101,874 VND	805,371 VND	9,290,082 VND	2,447,781 VND	2,277,619 VND	1,264,316 VND	866,943 VND	595,863 VND	1,697,886 VND	632,060 VND	812,648 VND	975,335 VND	3,007,321 VND	1,659,132 VND	2,340,513 VND	2,548,305 VND	784,714 VND	1,654,018 VND	449,735 VND	1,666,068 VND	2,269,233 VND	767,250 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	17 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
R Size(mm)	0.05 ～ 10	0.05 ～ 6	5	0.2 ～ 1.5	0.1 ～ 5	0.05 ～ 3	1 ～ 12.5	2 ～ 10	0.15 ～ 10	0.1 ～ 3	0.5 ～ 15	0.5 ～ 6	0.5 ～ 15	0.5 ～ 15	0.6	0.5 ～ 6	0.1 ～ 6	0.1 ～ 3	3	0.5 ～ 6	4	3 ～ 10	3 ～ 10	0.3 ～ 6	0.1 ～ 6	2 ～ 6	0.5 ～ 6	0.5 ～ 6	0.5 ～ 6	0.1 ～ 3	0.05 ～ 6	0.5 ～ 3	0.1 ～ 6	0.1 ～ 6	0.1 ～ 3	0.5 ～ 5	0.3 ～ 12.5	1.5 ～ 12.5	3 ～ 6	0.3 ～ 4	1 ～ 12.5	0.5 ～ 12.5	3 ～ 10	5	0.5 ～ 10
Blade length (ℓ)(mm)	0.2 ～ 38	0.1 ～ 20	15	0.8 ～ 8	0.5 ～ 25	0.1 ～ 10	2 ～ 60	11 ～ 38	0.6 ～ 38	0.2 ～ 6	1.5 ～ 45	1.5 ～ 18	1.5 ～ 45	2.5 ～ 55	3	1 ～ 18	0.4 ～ 18	0.2 ～ 6	12	1 ～ 12	8	12 ～ 38	6 ～ 20	0.6 ～ 22	0.16 ～ 12	8 ～ 22	0.7 ～ 8.1	1 ～ 12	1.5 ～ 20	0.2 ～ 6	0.1 ～ 20	1.5 ～ 10	0.2 ～ 12	0.2 ～ 12	0.2 ～ 6	2.5 ～ 25	0.9 ～ 50	4.5 ～ 80	12 ～ 25	0.9 ～ 12	2 ～ 60	2 ～ 55	9 ～ 30	15	1.5 ～ 30
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	14 ～ 21	-	-	-	10 ～ 100	-	3 ～ 80	-	-	2 ～ 10	-	1.1 ～ 9	-	2.5 ～ 30	16	-	-	10 ～ 80	1 ～ 80	100 ～ 140	5 ～ 60	2.5 ～ 30	-	0.5 ～ 15	-	-	-	-	0.5 ～ 15	-	-	-	-	1.2 ～ 4	14 ～ 21	-	-	-	3 ～ 12.5
Shank diameter (d)(mm)	4 ～ 20	4 ～ 12	10	3	3 ～ 10	4 ～ 6	6 ～ 25	6 ～ 20	4 ～ 20	4 ～ 6	4 ～ 32	4 ～ 12	4 ～ 32	4 ～ 25	4	4 ～ 12	4 ～ 12	6	6	6 ～ 12	8	6 ～ 20	6 ～ 20	6 ～ 16	4 ～ 16	10 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	4 ～ 6	4 ～ 12	6	4 ～ 12	4 ～ 12	4 ～ 6	3 ～ 10	3 ～ 25	3 ～ 25	6 ～ 12	4 ～ 8	6 ～ 25	4 ～ 25	5 ～ 18	10	4 ～ 20
Number of flutes(sheet)	2	2	2	2	2	2	2	4	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	2	2	3	2	2	2	2	2	2	4	2	2	2	2	2	2
Overall Length (L)(mm)	40 ～ 160	50 ～ 110	100	40	70 ～ 200	50 ～ 80	80 ～ 230	80 ～ 125	50 ～ 100	45 ～ 120	80 ～ 230	50 ～ 120	50 ～ 200	50 ～ 180	50	50 ～ 110	35 ～ 70	50	140	50 ～ 80	60	90 ～ 160	90 ～ 160	60 ～ 160	45 ～ 160	200 ～ 250	60 ～ 110	50 ～ 80	60 ～ 120	35 ～ 45	50 ～ 100	60 ～ 80	35 ～ 60	50 ～ 110	50 ～ 60	100 ～ 250	50 ～ 180	100 ～ 230	80 ～ 110	50 ～ 90	80 ～ 230	60 ～ 180	120 ～ 180	100	50 ～ 180
work material	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[◎]	Titanium[◎]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]	Titanium[○]
R Precision(μm)	-0.007 to 0.003 ～ ±0.01	0.005～-0.005 ～ 0.01～-0.01	-0.01～+0.01	-0.01～+0.01	0.01～-0.01	0.002～-0.002	-	-	±10	-	0～-0.04 ～ 0～-0.03	-0.003～+0.003	0～-0.04 ～ 0～-0.03	-0.01～+0.01	-0.01～+0.01	-0.007～+0.007 ～ -0.005～+0.005	-0.007～+0.003 ～ -0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-0.015～+0.015 ～ -0.01	-0.003～+0.003	-0.01～+0.01	-0.01～+0.01	-0.01～0.01	-0.005 to +0.005 ～ -0.005～+0.005	-0.01～0.01	-	-0.01～+0.01	0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	0.02～-0.02	0～-0.03	0～-0.03	0～-0.03	±0.01	-	-10～+10	10～-10	10～-10	5～-5 ～ 10～-10
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	R Groove	Curved surface / Engraving / R Groove	Curved surface / Engraving / R Groove	Curved surface / R Groove	Curved surface / R Groove	Curved surface / R Groove
Coating	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	Other	-	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Spherical Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	NS TOOL	NACHI(FUJIKOSHI)	OSG	NS TOOL	NS TOOL	OKAZAKI SEIKO	SANDVIK	7 LEADERS	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	NS TOOL	SANKO MFG	SANKO MFG	SANKO MFG	SUMITOMO ELECTRIC HARDMETAL	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET
Product SeriesDòng sản phẩm	Ball End Type, 2-Flute WXL-EBD	MSB230 MUGEN-COATING 2-Flute Ball End Mill	GS MILL Ball 2GSR	Ball End Type, 2-Flute FX-MG-EBD-3	MSBL230 MUGEN-COATING Long Ball End Mill	MSB230G2 MUGEN-COATING High Precision Profit Ball End Mill	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)	Carbide 2-Flute Short Ball End Mill 30° B222X	GS MILL Long Neck Hard Ball GSBNH2	X's Mill Geo Ball Long Shank 2GEOLSR	Mold Meister Ball 2MMR	X's Mill Geo Ball 2GEOR	Ball End Type, 2-Flute FX-MG-EBD	Ball End Type, 2-Flute WX-EBD	Ball End Type, 2-Flute WXS-EBD	Ball End Type, 2-Flute WXL-HS-EBD	Ball End Type, 2-Flute FX-EBD-6	Long Shank Ball Type, 2-Flute FX-LS-MG-EBD	Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS	Ball End Type, 2-Flute WXE-HS-EBD	Ball End Type, 2-Flute FX-HO-MG-EBD	Ball End Type, 2-Flute FXS-HO-EBDS	Ball End Type, 2-Flute FX-PC-MG-EBD	Ball End Type, 2-Flute WXL-PC-EBD	Long Pencil-neck Type, 2-Flute FX-PCL-EBD	Ball-End Type, FXS-EQD	Ball-End Type, 2-Flute For finishing FX-H-EBD	MSB345 3-Flute Ball-End Mill	MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)	MSBH230 2-Flute Ball-End Mill for High-Hardness	MSBH345 3-Flute Ball-End Mill for High-Hardness	MSB230SF MUGEN-COATING Ball End Mill with Short Shank (for Shrink Fitting)	MSB230S MUGEN-COATING Short Ball End Mill	MACH225 MUGEN-COATING High Speed Ball End Mill for Hardened Steels	MUGEN-COATING Extra Long Shank Ball End Mill MSBXL230	SAGCBE SA Coating Carbide 2-Flute Ball-Nose	SAGCBELS SA Coating Carbide 2-Flute Ball-Nose Long Shank	SAGCBE4T SA Coated Carbide 4-Flute Ball	GSX MILL Ball End Mill GSXB20000 Type	SBD2LA Long Ball End Mill, 2-Flute, OK Coated	SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated	One Cut Ball (Slim Shank) DZ-OCUB	One Cut Ball 03 DZ03-OCSB	One Cut Hard End Mill DV-OCSB

Loading...Tải…