Radius End Mills (Carbide)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute / short model

  MISUMI

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 3	8 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	60 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,491,666 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBRE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.It is possible to increase the depth of cut.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 6	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 4,730,712 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius End Mill [4SUR]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	R0.1 ～ R4.0	2.5 ～ 38	4	50 ～ 100	-	6 ～ 20	-	-	TiAlN	radius	43°	±0.02

  From: 1,124,130 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL series carbide radius end mill, 2-flute / short model

  MISUMI

  Radius end mills are available at low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 30	2 ～ 4	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: 442,479 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius End Mill [4HCR (HPE4000R)]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	R0.02 ～ R5	2.5 ～ 38	4	45 ～ 150	-	4 ～ 20	-	-	TiSiN	radius	30°	±0.005

  From: 976,364 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-Flute Radius

  YG 1

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 12	0.2 ～ 0.5	17 ～ 32	3	55 ～ 80	Aluminum[◎] / Copper[○]	6 ～ 12	-	Plane / Side / Groove / Plunging (Z feed)	-	radius	Powerful Torsion (45°-60°)	-

  From: 649,260 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  High Speed/Feed Corner Radius End Mill [4HIT (HHRE4000R)]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1.5 ～ 12	R0.3 ～ R2.0	0.8 ～ 6	4	45 ～ 110	-	6 ～ 12	4 ～ 40	-	TiSiN	High-Feed Radius	-	±0.005

  From: 1,018,171 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Carbide Corner R End Mill

  OSG KOREA CORP

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 16	R0.05 ～ R5	2.5 ～ 32	4F	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	6 ～ 16	-	Plane / Side / Curved surface	FX	radius	Standard torsion (30-40°)	±0.02

  From: 583,260 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding servi...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	4 ～ 24	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,699,876 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  MISUMI

  [Features]·Radius type of multi-function end mill·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 56	4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Due to the effect of OK hard coat, it is a multi-functional corner radius end mill that can machine high hardness materials up to 65 HRC at high speed.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.5 ～ 2	8 ～ 24	4	70 ～ 110	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	6 ～ 12	15 ～ 42	Plane / Side / Groove	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill 4TFR Type

  KYOCERA

  【用途】・高能率・難削材加工用エンドミル(ラジアス)【商品仕様】・ソリッドエンドミル・JANコード：4960664745210・トラスココード：825-0334【材質/仕上】・超微粒子超硬母材

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 2,056,421 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Corner Radius End Mill [4ALR (APLS4000R)]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	R0.5 ～ R1.0	9 ～ 18	4	80 ～ 110	-	6 ～ 12	18 ～ 30	-	TiAlN	radius	45°	±0.01

  From: 1,139,020 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	16 ～ 56	4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 16	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02 ～ 10

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile typ...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,742,415 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  MISUMI

  [Features]·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.75 ～ 3	1.2 ～ 5	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	7.5 ～ 24	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	No torsion	±0.02

  From: 1,321,408 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 2	5 ～ 26	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	18 ～ 70	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, 50° Spiral / Short Model

  MISUMI

  [Features]·High helix angle end mill with radius for machining high hardness steel·High tool rigidity minimizes tool tilt during side milling·Machining of high hardness steel up to 65HRC is possible·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10	0.5	20	6	90	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	10	-	Plane / Side / Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.02

  From: 3,832,856 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

  MISUMI

  The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness

  • Volume Discount

  • DLC
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	3	40 ～ 80	Aluminum[◎] / Copper[○] / Resin[○]	4 ～ 12	23 ～ 50	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	DLC	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 4-flute radius end mill that achieves high feed/high speed machining

  • Volume Discount

  • High-Hardness Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 10	0.2 ～ 1.5	7.5 ～ 30	4	45 ～ 80	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	3 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±10

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

  MISUMI

  Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.1 ～ 3	4 ～ 45	2 ～ 4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

  MISUMI

  Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 25	0.2 ～ 6.5	4 ～ 50	4	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 25	-	Plane / Side / Curved surface / Groove	For High Hardness (Silicon Group)	radius	Other	±0.02

  From: 1,010,709 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.2 ～ 1	13 ～ 26	4	90 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,045,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface

  OSG

  Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 8	0.1	0.9 ～ 1.2	4	90 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	6 ～ 8	9 ～ 12	Plane / Side / Curved surface	TiAlN	radius	No torsion	-

  From: 2,589,026 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation

  OSG

  The original ultra-smooth DLC coating enables not only high-speed machining of aluminum but also semi-dry machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎] / Copper[○] / Resin[◎]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	DLC	radius	Standard torsion (30-40°)	-

  From: 2,106,079 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ETM 4□□□-□□-TH [Alteration Supported Product]With Epoch Turbo Mill Neck Straight With Corner R

  MITSUBISHI HITACHI TOOL

  Suppresses vibrations and chatter. Corner Rounding End Mill for High Efficiency Machining

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10	2	20	4	110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	10	-	Curved surface / Plunging (Z feed)	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	0.015～-0.015

  From: 4,836,600 VND
  Days to Ship: Số ngày giao hàng: Quote

  Quote

• You can add up to 6 items per a category to the compare list. Compare

  

  Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 22	0.4 ～ 5	9 ～ 33	3	80 ～ 200	Aluminum[◎] / Copper[○]	5.8 ～ 20	-	Side / Groove	Non-Coated	radius	Powerful Torsion (45°-60°)	0.025～-0.025

  From: 1,912,288 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBRE-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.High-efficiency machining is possible with high feed.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	-	1.5 ～ 2	3	50 ～ 70	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: 8,155,206 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Radius End Mill (X5070S)

  YG 1

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.1 ～ 1	10 ～ 30	4	70 ～ 110	Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	6 ～ 12	-	Plane / Side / Groove / Plunging (Z feed)	Other	radius	Standard torsion (30-40°)	-

  From: 1,508,384 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura HD, Carbide Solid Radius End Mill (With square center-cut oil hole)

  SANDVIK

  [Features]· Internal lubrication gives good chip discharge properties.· Twice the cutting depth that was conventionally possible· Ideal for everything from shoulder cutting to full grooving.· With reinforced edge lines, assures long product life even with intense machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  -	0.5 ～ 6.35	-	4	57 ～ 104	Quenched and tempered steel[○] / Stainless Steel[○]	6 ～ 20	-	-	-	radius	Standard torsion (30-40°)	-

  From: 3,478,545 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills 2 Flutes Short with Corner Chamfering

  OSG

  [Features]· Cemented carbide is used for the blade.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4	-	11	2	45	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	6	-	-	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 2,469,598 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius End Mill [2HCR]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 20	R0.02 ～ R5	0.4 ～ 38	2	45 ～ 150	-	4 ～ 20	-	-	TiSiN	radius	30°	±0.005

  From: 934,316 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

  MISUMI

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: 3,002,853 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 20	0.813 ～ 2.607	8 ～ 40	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: 2,359,017 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

  MISUMI

  [Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage pr...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	35 ～ 108	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: 2,361,520 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	4	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	35 ～ 108	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: 1,970,331 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

  MISUMI

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.2 ～ 0.5	3 ～ 9	4	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	6	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.005

  From: 1,209,640 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  MISUMI

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0 ～ 16	0.2 ～ 2	16 ～ 48	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 16	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be r...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,171,064 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.5 ～ 3	4 ～ 40	4	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,588,109 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  MISUMI

  Long neck type with interference prevention can be selected from a number of effective lengths

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 16	1 ～ 3	6 ～ 24	4	70 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 16	28 ～ 120	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,873,993 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	3	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: 1,564,545 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	4	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: 1,497,010 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	14 ～ 68	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	OSG	KYOWA SEIKO	HANSONG M&T	MISUMI	HANSONG M&T	YG 1	HANSONG M&T	OSG KOREA CORP	MISUMI	MISUMI	OKAZAKI SEIKO	KYOCERA	HANSONG M&T	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	DIJET	KYOWA SEIKO	YG 1	SANDVIK	OSG	HANSONG M&T	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	(Economy series) XAL series carbide radius end mill, 4-flute / short model	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	CBN 2-Flute Corner Radius End Mill SBRE-2	Corner Radius End Mill [4SUR]	(Economy series) XAL series carbide radius end mill, 2-flute / short model	Corner Radius End Mill [4HCR (HPE4000R)]	3-Flute Radius	High Speed/Feed Corner Radius End Mill [4HIT (HHRE4000R)]	4-Flute Carbide Corner R End Mill	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45°, regular model	SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated	Solid End Mill 4TFR Type	Long Shank Corner Radius End Mill [4ALR (APLS4000R)]	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, 50° Spiral / Short Model	DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type	XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	TSC Series Carbide Uneven Lead 4-Flute Radius End Mill	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface	Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation	ETM 4□□□-□□-TH [Alteration Supported Product]With Epoch Turbo Mill Neck Straight With Corner R	Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type	CBN 3-Flute Corner Radius End Mill SBRE-3	4-Flute Radius End Mill (X5070S)	CoroMill Plura HD, Carbide Solid Radius End Mill (With square center-cut oil hole)	Micro Grain Carbide End Mills 2 Flutes Short with Corner Chamfering	Corner Radius End Mill [2HCR]	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model
From		2,491,666 VND	4,730,712 VND	1,124,130 VND	442,479 VND	976,364 VND	649,260 VND	1,018,171 VND	583,260 VND	1,699,876 VND		1,836,506 VND	2,056,421 VND	1,139,020 VND		1,742,415 VND	1,321,408 VND		3,832,856 VND				1,010,709 VND	4,045,000 VND	2,589,026 VND	2,106,079 VND	4,836,600 VND	1,912,288 VND	8,155,206 VND	1,508,384 VND	3,478,545 VND	2,469,598 VND	934,316 VND	3,002,853 VND	2,359,017 VND	2,361,520 VND	1,970,331 VND	1,209,640 VND		1,171,064 VND	1,588,109 VND	1,873,993 VND	1,564,545 VND	1,497,010 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	15 Day(s) or more	8 Day(s) or more	7 Day(s) or more	Same day or more	6 Day(s) or more	7 Day(s)	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	10 Day(s) or more	9 Day(s)	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	17 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Quote	6 Day(s) or more	8 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	XAL General Steel 4 Flutes				XAL General Steel 2 Flutes					TS High-Hardness Steel 3 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)				XAL General Steel 4 Flutes	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes	TS General Steel 3 Flutes S (Short)	TS High-Hardness Steel Multi-Flutes （5 ~） S (Short)	DLC Aluminum 3 Flutes R (Regular)	High-Hardness Steel 4 Flutes SR													TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	XAL General Steel 3 Flutes	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)
Blade diameter (D)(φ)	3 ～ 20	3 ～ 20	0.3 ～ 6	1 ～ 20	1 ～ 12	1 ～ 20	5 ～ 12	1.5 ～ 12	1 ～ 16	2 ～ 12	3 ～ 20	4 ～ 12	-	6 ～ 12	3 ～ 20	2 ～ 12	3 ～ 12	3 ～ 12	10	2 ～ 12	3 ～ 10	2 ～ 20	2 ～ 25	6 ～ 12	6 ～ 8	3 ～ 20	10	6 ～ 22	3 ～ 6	4 ～ 12	-	4	0.2 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	2 ～ 6	0 ～ 16	2 ～ 12	2 ～ 20	4 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12
R Size(mm)	0.1 ～ 3	0.2 ～ 3	-	R0.1 ～ R4.0	0.1 ～ 3	R0.02 ～ R5	0.2 ～ 0.5	R0.3 ～ R2.0	R0.05 ～ R5	0.5 ～ 2	0.2 ～ 3	0.5 ～ 2	-	R0.5 ～ R1.0	0.2 ～ 3	0.5 ～ 2	0.75 ～ 3	0.3 ～ 2	0.5	0.2 ～ 1	0.2 ～ 1.5	0.1 ～ 3	0.2 ～ 6.5	0.2 ～ 1	0.1	0.5 ～ 3	2	0.4 ～ 5	-	0.1 ～ 1	0.5 ～ 6.35	-	R0.02 ～ R5	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.813 ～ 2.438	0.2 ～ 0.5	0.2 ～ 2	0.5 ～ 2	0.5 ～ 3	1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1
Blade length (ℓ)(mm)	8 ～ 38	8 ～ 38	0.3 ～ 2	2.5 ～ 38	3 ～ 30	2.5 ～ 38	17 ～ 32	0.8 ～ 6	2.5 ～ 32	4 ～ 24	5 ～ 56	8 ～ 24	-	9 ～ 18	16 ～ 56	2 ～ 12	1.2 ～ 5	5 ～ 26	20	5 ～ 36	7.5 ～ 30	4 ～ 45	4 ～ 50	13 ～ 26	0.9 ～ 1.2	4.5 ～ 30	20	9 ～ 33	1.5 ～ 2	10 ～ 30	-	11	0.4 ～ 38	8 ～ 24	8 ～ 40	8 ～ 24	8 ～ 24	3 ～ 9	16 ～ 48	2 ～ 12	4 ～ 40	6 ～ 24	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18
Number of flutes(sheet)	4	4	2	4	2 ～ 4	4	3	4	4F	3	4	4	-	4	4	3	4	3	6	3	4	2 ～ 4	4	4	4	3	4	3	3	4	4	2	2	3	4	3	4	4	3	4	4	4	3	4	3
Overall Length (L)(mm)	50 ～ 100	60 ～ 125	50 ～ 60	50 ～ 100	40 ～ 75	45 ～ 150	55 ～ 80	45 ～ 110	50 ～ 150	50 ～ 100	60 ～ 130	70 ～ 110	-	80 ～ 110	60 ～ 130	50 ～ 100	60 ～ 110	60 ～ 100	90	40 ～ 80	45 ～ 80	50 ～ 110	50 ～ 120	90 ～ 110	90 ～ 100	50 ～ 125	110	80 ～ 200	50 ～ 70	70 ～ 110	57 ～ 104	45	45 ～ 150	50 ～ 100	50 ～ 150	80 ～ 160	80 ～ 160	50	60 ～ 110	50 ～ 100	50 ～ 130	70 ～ 180	40 ～ 65	40 ～ 65	60 ～ 100
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	-	Aluminum[◎] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[◎]	-	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	Aluminum[◎] / Copper[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○]	Aluminum[◎] / Copper[○]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○]	Quenched and tempered steel[○] / Stainless Steel[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]
Shank diameter (d)(mm)	4 ～ 20	6 ～ 20	6	6 ～ 20	4 ～ 12	4 ～ 20	6 ～ 12	6 ～ 12	6 ～ 16	4 ～ 12	6 ～ 20	6 ～ 12	-	6 ～ 12	6 ～ 16	4 ～ 12	6 ～ 12	6 ～ 12	10	4 ～ 12	3 ～ 10	4 ～ 20	6 ～ 25	6 ～ 12	6 ～ 8	6 ～ 20	10	5.8 ～ 20	6	6 ～ 12	6 ～ 20	6	4 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	6	6 ～ 16	4 ～ 12	4 ～ 20	4 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	4 ～ 40	-	-	26 ～ 92	15 ～ 42	-	18 ～ 30	-	-	7.5 ～ 24	18 ～ 70	-	23 ～ 50	-	-	-	-	9 ～ 12	-	-	-	-	-	-	-	-	-	-	35 ～ 108	35 ～ 108	-	-	-	-	28 ～ 120	-	-	14 ～ 68
Machining Application	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	-	Plane / Side / Curved surface / Groove / Inclined Cuts	-	Plane / Side / Groove / Plunging (Z feed)	-	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Groove	-	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Curved surface / Plunging (Z feed)	Side / Groove	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	-	-	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts
Coating	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	TiAlN	For General Steels (AlCrN, etc.)	TiSiN	-	TiSiN	FX	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	TiAlN	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	TiAlN	TiAlN	DLC	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	Other	-	Non-Coated	TiSiN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Type	radius	radius	radius	radius	radius	radius	radius	High-Feed Radius	radius	High-Feed Radius	radius	radius	-	radius	radius	High-Feed Radius	High-Feed Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	High-Feed Radius	radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	43°	Standard torsion (30-40°)	30°	Powerful Torsion (45°-60°)	-	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	-	45°	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Other	Powerful Torsion (45°-60°)	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	30°	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	±0.02	-	-	±0.02	±0.02	±0.005	-	±0.005	±0.02	±0.015	±0.01	-	-	±0.01	±0.02 ～ 10	±0.015	±0.02	±0.01	±0.02	±0.02	±10	±0.02	±0.02	-	-	-	0.015～-0.015	0.025～-0.025	-	-	-	-	±0.005	-	-	-	-	±0.005	±0.02	±0.015	±0.015	±0.015	±0.01	±0.01	±0.01

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	OSG	KYOWA SEIKO	HANSONG M&T	MISUMI	HANSONG M&T	YG 1	HANSONG M&T	OSG KOREA CORP	MISUMI	MISUMI	OKAZAKI SEIKO	KYOCERA	HANSONG M&T	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	MITSUBISHI HITACHI TOOL	DIJET	KYOWA SEIKO	YG 1	SANDVIK	OSG	HANSONG M&T	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	(Economy series) XAL series carbide radius end mill, 4-flute / short model	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	CBN 2-Flute Corner Radius End Mill SBRE-2	Corner Radius End Mill [4SUR]	(Economy series) XAL series carbide radius end mill, 2-flute / short model	Corner Radius End Mill [4HCR (HPE4000R)]	3-Flute Radius	High Speed/Feed Corner Radius End Mill [4HIT (HHRE4000R)]	4-Flute Carbide Corner R End Mill	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45°, regular model	SCE4H Ultra-Strong Radius, 4-Flute, OK Hard Coated	Solid End Mill 4TFR Type	Long Shank Corner Radius End Mill [4ALR (APLS4000R)]	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, 50° Spiral / Short Model	DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type	XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	TSC Series Carbide Uneven Lead 4-Flute Radius End Mill	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface	Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation	ETM 4□□□-□□-TH [Alteration Supported Product]With Epoch Turbo Mill Neck Straight With Corner R	Solid End Mill for Aluminum Machining AL-SEES3-LS-R Type	CBN 3-Flute Corner Radius End Mill SBRE-3	4-Flute Radius End Mill (X5070S)	CoroMill Plura HD, Carbide Solid Radius End Mill (With square center-cut oil hole)	Micro Grain Carbide End Mills 2 Flutes Short with Corner Chamfering	Corner Radius End Mill [2HCR]	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

Loading...Tải…