Radius End Mills (Carbide)（Machining Application：Side）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute / short model

  MISUMI

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 3	8 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Side	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: 574,958 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	60 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	6 ～ 20	-	Side	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,491,666 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL series carbide radius end mill, 2-flute / short model

  MISUMI

  Radius end mills are available at low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 30	2	50 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 12	-	Side	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: 442,479 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Radius

  YG 1

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 2	2.5 ～ 48	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	6 ～ 20	-	Side	TiAlN	radius	-	-

  From: 694,540 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBRE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.It is possible to increase the depth of cut.Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 6	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Side	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 4,730,712 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  MISUMI

  [Features]·Radius type of multi-function end mill·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 56	4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

  MISUMI

  The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness

  • Volume Discount

  • DLC
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	3	40 ～ 80	Aluminum[◎] / Copper[○] / Resin[○]	4 ～ 12	23 ～ 50	Side	DLC	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  • Volume Discount

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	18 ～ 38	4	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 12	-	Side	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02 ～ 10

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CNRS 4-flute radius for machining titanium and super heat-resistant alloys

  UNION TOOL

  [Features]· High Efficiency 4-Flute Radius for Machining Titanium / Super Heat Resistant Alloy· Life-span increasing UT coating suitable for heat resistant and difficult to cut materials· Variable split, high torsion and positive rake angle design enables stable machining· A blade design that reduces the cutting resistance in helical and inclined use, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	1 ～ 2	16 ～ 26	4	90 ～ 120	general steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Titanium[○/◎] / Copper[○/◎]	6 ～ 12	-	Side	For General Steels (AlCrN, etc.) / TiCN	radius	45°	-

  From: 2,097,620 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Carbide Corner R End Mill

  OSG KOREA CORP

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 16	R0.05 ～ R5	2.5 ～ 32	4F	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	6 ～ 16	-	Side	FX	radius	Standard torsion (30-40°)	±0.02

  From: 583,260 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Side	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,742,415 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model

  MISUMI

  [Features]·Suppresses chattering by adopting short flute length and back taper shape on peripheral edge·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 3	0.05 ～ 0.5	0.16 ～ 6	2	40 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 6	1 ～ 60	Side	For High Hardness (Silicon Group)	Tapered neck radius	Standard torsion (30-40°)	±0.005 ～ ±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, 50° Spiral / Short Model

  MISUMI

  [Features]·High helix angle end mill with radius for machining high hardness steel·High tool rigidity minimizes tool tilt during side milling·Machining of high hardness steel up to 65HRC is possible·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10	0.5	20	6	90	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	10	-	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.02

  From: 3,832,856 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

  MISUMI

  Radius type that's also effective in preventing cutter marks

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	3	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 12	23 ～ 50	Side	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model

  MISUMI

  Introducing the short type in the 4-flute radius for high-efficiency and high-speed machining

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.2 ～ 3	4 ～ 45	4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Side	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  From: 519,316 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Roughing Radius GSRE-R

  NACHI(FUJIKOSHI)

  Ideal for high-efficiency roughing during contour machining and corner rounding of materials from steel to stainless steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 4	13 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 20	-	Side	TiAlN	radius	Standard torsion (30-40°)	-

  From: 2,724,564 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Radius GSH-R

  NACHI(FUJIKOSHI)

  Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.2 ～ 2	13 ～ 38	6 ～ 8	50 ～ 100	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6 ～ 20	-	Side	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,369,290 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 Flutes Short for Copper & Aluminum Alloys

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Even when machining aluminum parts that require a large amount of cutting, the excellent cutting chip discharge created by the unique groove foam realizes large depth of cut and high feed at the same time.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 2	13 ～ 26	3	50 ～ 75	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 12	-	Side	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,809,623 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose

  OSG

  Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 5	0.3 ～ 1	2 ～ 10	3	60 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	6	4 ～ 15	Side	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 3,617,869 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.2 ～ 1	13 ～ 26	4	90 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	6 ～ 12	-	Side	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,045,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface

  OSG

  Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 8	0.1	0.9 ～ 1.2	4	90 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	6 ～ 8	9 ～ 12	Side	TiAlN	radius	No torsion	-

  From: 2,589,026 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]

  UNION TOOL

  [Features]· Supports a wide range of applications from carbon to hardened steel (up to 55 HRC)· Available with an extensive lineup of corner radii

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1.5 ～ 6	0.2 ～ 2	3 ～ 15	2	45 ～ 50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	4 ～ 6	-	Side	TiCN	radius	-	-

  From: 1,121,104 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSER-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 4	-	1 ～ 40	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Side	Non-Coated	radius	Standard torsion (30-40°)	-

  From: 1,606,412 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-4-Flute Radius End Mill

  YG 1

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 16	0.2 ～ 2	2.5 ～ 40	2 ～ 4	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○]	6 ～ 16	-	Side	AlTiN	radius	Standard torsion (30-40°)	-

  From: 510,353 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s)

  6 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  3-Flute Radius

  YG 1

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 12	0.2 ～ 0.5	17 ～ 32	3	55 ～ 80	Aluminum[◎] / Copper[○]	6 ～ 12	-	Side	-	radius	Powerful Torsion (45°-60°)	-

  From: 649,260 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X

  7 LEADERS

  [Features]· Also use the 2-flute short radius end mill to prevent tip chipping.· Nanoparticle Multilayer Coating· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 4	3 ～ 38	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	4 ～ 20	-	Side	-	radius	Standard torsion (30-40°)	0～-20

  From: 698,185 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

  MISUMI

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	-	Side	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: 3,002,853 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 20	0.813 ～ 2.607	8 ～ 40	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 20	-	Side	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: 2,359,017 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

  MISUMI

  [Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	35 ～ 108	Side	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: 2,361,520 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	4	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	35 ～ 108	Side	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: 1,970,331 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type

  MISUMI

  A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.2 ～ 0.5	3 ～ 9	4	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	6	-	Side	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.005

  From: 1,209,640 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  MISUMI

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0 ～ 16	0.2 ～ 2	16 ～ 48	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 16	-	Side	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Uses 3-flute shape that is resistant to chattering, so plunge processing is possible·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	4 ～ 24	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Side	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,699,876 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  MISUMI

  [Features]·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.75 ～ 3	1.2 ～ 5	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	7.5 ～ 24	Side	For High Hardness (Silicon Group)	High-Feed Radius	No torsion	±0.02

  From: 1,321,408 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Side	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,171,064 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.5 ～ 3	4 ～ 40	4	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 20	-	Side	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,588,109 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  MISUMI

  Long neck type with interference prevention can be selected from a number of effective lengths

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 16	1 ～ 3	6 ～ 24	4	70 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 16	28 ～ 120	Side	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,873,993 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	3	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: 1,564,545 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	4	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: 1,497,010 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	14 ～ 68	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 2	5 ～ 26	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	18 ～ 70	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]·Radius type of multi-function end mill·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	5 ～ 56	3	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill·Long shank type ideal for deep cavity milling·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 22	0.2 ～ 2	4.5 ～ 30	4	80 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	10 ～ 18	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: 2,204,293 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Radius type of multi-function end mill·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface while suppressing chattering

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	4	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	14 ～ 68	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·Multi-function end mill radius type.·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 38	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	18 ～ 73	Side	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	OSG	MISUMI	YG 1	KYOWA SEIKO	MISUMI	MISUMI	MISUMI	UNION TOOL	OSG KOREA CORP	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	UNION TOOL	KYOWA SEIKO	YG 1	YG 1	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product SeriesDòng sản phẩm	(Economy series) XAL series carbide radius end mill, 4-flute / short model	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	(Economy series) XAL series carbide radius end mill, 2-flute / short model	4-Flute Radius	CBN 2-Flute Corner Radius End Mill SBRE-2	TSC series carbide radius end mill, 4-flute, 45°, regular model	DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	CNRS 4-flute radius for machining titanium and super heat-resistant alloys	4-Flute Carbide Corner R End Mill	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / stub model	TSC series carbide tapered neck radius end mill, 2-flute / tapered neck model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, 50° Spiral / Short Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model	XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion / Short Model	GS MILL Roughing Radius GSRE-R	GS MILL Hard Radius GSH-R	3 Flutes Short for Copper & Aluminum Alloys	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface	C-CRS, UT Coat, 2-Flute Radius [Alteration Supported Product]	End Mill with 2 Carbide Flutes and Corner Radius KSER-2	2-4-Flute Radius End Mill	3-Flute Radius	Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model	TSC Series Carbide Radius End Mill For Shrink Fit Holder Radius Accuracy ±5µm/4 Flutes/Stub Type	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	TSC series carbide radius end mill, high-feed, high-rigidity, 3-flute, 45° spiral / short model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model
From	574,958 VND	2,491,666 VND	442,479 VND	694,540 VND	4,730,712 VND				2,097,620 VND	583,260 VND	1,742,415 VND		3,832,856 VND Special Price On Sale Till 31/03/2025		519,316 VND	2,724,564 VND	2,369,290 VND	1,809,623 VND	3,617,869 VND	4,045,000 VND	2,589,026 VND	1,121,104 VND	1,606,412 VND	510,353 VND	649,260 VND	698,185 VND	3,002,853 VND	2,359,017 VND	2,361,520 VND	1,970,331 VND	1,209,640 VND		1,699,876 VND	1,321,408 VND	1,171,064 VND	1,588,109 VND	1,873,993 VND	1,564,545 VND	1,497,010 VND				2,204,293 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	15 Day(s) or more	Same day or more	4 Day(s) or more	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	17 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s)	7 Day(s)	8 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	XAL General Steel 4 Flutes		XAL General Steel 2 Flutes			TS General Steel 4 Flutes R (Regular)	DLC Aluminum 3 Flutes R (Regular)	XAL General Steel 4 Flutes			TS High-Hardness Steel 3 Flutes B (Stub)	TS General Steel 2 Flutes	TS High-Hardness Steel Multi-Flutes （5 ~） S (Short)	Non-Coated Aluminum 3 Flutes R (Regular)													TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	XAL General Steel 3 Flutes	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	3 ～ 20	3 ～ 20	1 ～ 12	1 ～ 20	0.3 ～ 6	3 ～ 20	2 ～ 12	4 ～ 12	6 ～ 12	1 ～ 16	2 ～ 12	0.2 ～ 3	10	2 ～ 12	2 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	1 ～ 5	6 ～ 12	6 ～ 8	1.5 ～ 6	1 ～ 4	1 ～ 16	5 ～ 12	1 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12	2 ～ 6	0 ～ 16	2 ～ 12	3 ～ 12	2 ～ 12	2 ～ 20	4 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 22	3 ～ 12	3 ～ 20
R Size(mm)	0.1 ～ 3	0.2 ～ 3	0.1 ～ 3	0.1 ～ 2	-	0.2 ～ 3	0.2 ～ 1	0.2 ～ 2	1 ～ 2	R0.05 ～ R5	0.5 ～ 2	0.05 ～ 0.5	0.5	0.2 ～ 1	0.2 ～ 3	0.5 ～ 4	0.2 ～ 2	0.5 ～ 2	0.3 ～ 1	0.2 ～ 1	0.1	0.2 ～ 2	-	0.2 ～ 2	0.2 ～ 0.5	0.1 ～ 4	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.813 ～ 2.438	0.2 ～ 0.5	0.2 ～ 2	0.5 ～ 2	0.75 ～ 3	0.5 ～ 2	0.5 ～ 3	1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3
Blade length (ℓ)(mm)	8 ～ 38	8 ～ 38	3 ～ 30	2.5 ～ 48	0.3 ～ 2	5 ～ 56	5 ～ 36	18 ～ 38	16 ～ 26	2.5 ～ 32	2 ～ 12	0.16 ～ 6	20	5 ～ 36	4 ～ 45	13 ～ 38	13 ～ 38	13 ～ 26	2 ～ 10	13 ～ 26	0.9 ～ 1.2	3 ～ 15	1 ～ 40	2.5 ～ 40	17 ～ 32	3 ～ 38	8 ～ 24	8 ～ 40	8 ～ 24	8 ～ 24	3 ～ 9	16 ～ 48	4 ～ 24	1.2 ～ 5	2 ～ 12	4 ～ 40	6 ～ 24	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	4.5 ～ 30	4.5 ～ 18	5 ～ 38
Number of flutes(sheet)	4	4	2	4	2	4	3	4	4	4F	3	2	6	3	4	4	6 ～ 8	3	3	4	4	2	2	2 ～ 4	3	2	3	4	3	4	4	3	3	4	4	4	4	3	4	3	3	3	4	4	4
Overall Length (L)(mm)	50 ～ 100	60 ～ 125	50 ～ 75	50 ～ 100	50 ～ 60	60 ～ 130	40 ～ 80	60 ～ 100	90 ～ 120	50 ～ 150	50 ～ 100	40 ～ 100	90	40 ～ 80	50 ～ 110	50 ～ 100	50 ～ 100	50 ～ 75	60 ～ 70	90 ～ 110	90 ～ 100	45 ～ 50	50 ～ 80	50 ～ 110	55 ～ 80	50 ～ 100	50 ～ 100	50 ～ 150	80 ～ 160	80 ～ 160	50	60 ～ 110	50 ～ 100	60 ～ 110	50 ～ 100	50 ～ 130	70 ～ 180	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	80 ～ 200	60 ～ 100	60 ～ 110
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○/◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / Stainless Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Titanium[○/◎] / Copper[○/◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]
Shank diameter (d)(mm)	4 ～ 20	6 ～ 20	4 ～ 12	6 ～ 20	6	6 ～ 20	4 ～ 12	6 ～ 12	6 ～ 12	6 ～ 16	4 ～ 12	4 ～ 6	10	4 ～ 12	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6	6 ～ 12	6 ～ 8	4 ～ 6	4 ～ 6	6 ～ 16	6 ～ 12	4 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12	6	6 ～ 16	4 ～ 12	6 ～ 12	4 ～ 12	4 ～ 20	4 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20
Underneck length (ℓ1)(mm)	-	-	-	-	-	26 ～ 92	23 ～ 50	-	-	-	-	1 ～ 60	-	23 ～ 50	-	-	-	-	4 ～ 15	-	9 ～ 12	-	-	-	-	-	-	-	35 ～ 108	35 ～ 108	-	-	-	7.5 ～ 24	-	-	28 ～ 120	-	-	14 ～ 68	18 ～ 70	26 ～ 92	10 ～ 18	14 ～ 68	18 ～ 73
Machining Application	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side
Coating	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	For High Hardness (Silicon Group)	DLC	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.) / TiCN	FX	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	Non-Coated	TiAlN	TiAlN	TiAlN	TiCN	Non-Coated	AlTiN	-	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Type	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	High-Feed Radius	Tapered neck radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	radius	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	45°	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	±0.02	-	±0.02	-	-	±0.01	±0.02	±0.02 ～ 10	-	±0.02	±0.015	±0.005 ～ ±0.01	±0.02	±0.01 ～ ±0.02	±0.02	-	-	-	-	-	-	-	-	-	-	0～-20	-	-	-	-	±0.005	±0.02	±0.015	±0.02	±0.015	±0.015	±0.015	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01

Loading...Tải…