Radius End Mills (Carbide)（Coating：TiAlN）

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)

  OSG

  Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	60 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,491,666 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s) or more

  15 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Radius

  YG 1

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 2	2.5 ～ 48	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	6 ～ 20	-	Plane / Side / Groove / Plunging (Z feed)	TiAlN	radius	-	-

  From: 694,540 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius End Mill [4SUR]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	R0.1 ～ R4.0	2.5 ～ 38	4	50 ～ 100	-	6 ～ 20	-	-	TiAlN	radius	43°	±0.02

  From: 1,124,130 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Roughing Radius GSRE-R

  NACHI(FUJIKOSHI)

  Ideal for high-efficiency roughing during contour machining and corner rounding of materials from steel to stainless steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.5 ～ 4	13 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 2,724,564 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Radius GSH-R

  NACHI(FUJIKOSHI)

  Excellent in fracture resistance and is ideal for corner radius and contour machining of high hardness material.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.2 ～ 2	13 ～ 38	6 ～ 8	50 ～ 100	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,369,290 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose

  OSG

  Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 5	0.3 ～ 1	2 ～ 10	3	60 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	6	4 ～ 15	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 3,617,869 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius

  OSG

  The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.2 ～ 1	13 ～ 26	4	90 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,045,000 VND
  Days to Ship: Số ngày giao hàng: 17 Day(s) or more

  17 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface

  OSG

  Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 8	0.1	0.9 ～ 1.2	4	90 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	6 ～ 8	9 ～ 12	Plane / Side / Curved surface	TiAlN	radius	No torsion	-

  From: 2,589,026 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4GEOLS-R

  NACHI(FUJIKOSHI)

  Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	4.5 ～ 30	4	60 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	6 ～ 20	12 ～ -	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: 2,325,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL radius GS4-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and high-speed contour machining of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.2 ～ 2	7.5 ～ 26	4	45 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	0～-0.030 ～ 0～-0.015

  From: 1,438,216 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4XSGEO-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and contour machining of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	50 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: 1,963,261 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)

  OSG

  End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 2.5	0.1	0.7 ～ 3.7	2	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	6	1.5 ～ 5	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,797,033 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 4	0.1 ～ 1	6 ～ 11	2	40 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	4 ～ 6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: 2,200,308 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius

  OSG

  Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  16 ～ 20	2	48 ～ 56	2	140 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	16 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	Standard torsion (30-40°)	-

  From: 18,356,801 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The advanced "unequal lead" effect suppresses chatter and realizes amazing high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 10	0.2 ～ 2	6 ～ 20	4	50 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6 ～ 10	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 2,274,865 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Super Radius End Mills

  OSG

  A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 13	0.5 ～ 3	0.8 ～ 5.5	3 ～ 4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]	6 ～ 12	5 ～ 24	Plane / Side / Curved surface / Groove / Plunging (Z feed)	TiAlN	radius	No torsion	-

  From: 1,901,667 VND
  Days to Ship: Số ngày giao hàng: 15 Day(s)

  15 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 30	4	60 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6 ～ 20	9 ～ 60	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,041,359 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank

  OSG

  Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6	0.5	9	4	50	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	6	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,359,454 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WXS Coated Multiple Flutes Short Super

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Corner radius end mill with high rigidity for high speed machining. High-speed machining of hardened steel is also possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.2 ～ 3	15 ～ 50	6 ～ 8	90 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	6 ～ 25	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,149,996 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ The advanced "unequal lead" effect suppresses chatter and realizes amazing high efficiency machining.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  8	0.3 ～ 2	16	6	60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	8	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 3,682,197 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose

  OSG

  Capable of high-efficiency, high-precision machining of wide standing walls using step cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  10	0.5	15	4	130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	8	-	Plane / Side / Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 4,444,485 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2T SA Coated Carbide Radius 2-Flute

  SANKO MFG

  [Features]· Ideal for corner rounding or cutting curved surfaces.· Can also be used to prevent chipped corners.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 5	10 ～ 45	2	50 ～ 115	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 20	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 1,642,018 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank

  SANKO MFG

  [Features]· Suitable for corner rounding or cutting curved surfaces.· A long shank type which allows for machining in deep sections.· Finished surfaces can be improved and high-efficiency machining is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 8	20 ～ 75	4	120 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 25	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 3,310,003 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank

  SANKO MFG

  Suitable for corner rounding or cutting curved surfaces. The long shank allows for machining in deep sections.[Features]· A long shank type which allows for machining in deep sections.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 25	0.3 ～ 8	20 ～ 75	2	120 ～ 230	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	6 ～ 25	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	0～+0.04

  From: 2,895,318 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCD2A End Mill with Corner R, 2-Flute, OK Coated

  OKAZAKI SEIKO

  By adopting a long shank, it is possible to machine corner radius in deep parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	12 ～ 36	2	70 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	6 ～ 12	-	Plane / Groove	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCE4A Ultra-Strong Radius, 4-Flute, OK Coated

  OKAZAKI SEIKO

  A multi-function type end mill that is capable of groove milling and side milling as well as profiling.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.5 ～ 2	8 ～ 24	4	70 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	6 ～ 12	15 ～ 42	Plane / Side / Groove	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 1,836,506 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 10	0.5	21 ～ 34	4	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	6 ～ 10	-	Side	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,665,286 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 1	8 ～ 38	4	60 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	6 ～ 20	-	Side / Groove	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: 2,079,667 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSRA-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.5 ～ 3	-	1.5 ～ 10	2	60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	3	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	-

  From: 1,886,934 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 4 Carbide Flutes and Corner Radius KSRA-4

  KYOWA SEIKO

  [Features]A carbide end mill suitable for general steel, stainless steel, and other workpieces, 2 flutes, with corner R.It is resistant to breakage and chipping.The high cutting speed and high production efficiency lead to overall production cost reduction.[Applications]Suitable for slab milling, side milling, curved surface milling, grooving, and ramping.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 3	-	3 ～ 10	4	60	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	3	-	Plane / Side / Curved surface / Groove / Inclined Cuts	TiAlN	radius	Standard torsion (30-40°)	-

  From: 2,447,584 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill, 4-Flute GM-4R

  KABUSYUUKOUGU

  GM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and features the reasonable balance with the good cutting quality. It can extend the tool lifespan.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.2 ～ 3	8 ～ 30	4	50 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-

  From: 262,320 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 4-Flute, UVX-TI-4FL-SL

  OSG

  [Features]·It supports grooving and side milling, complex pocket machining, and chatter-prone milling. It has achieved stability and high efficiency in titanium alloy machining, which has a high degree of difficulty. ·With grooved SAFE-LOCK, high runout accuracy (less than 3 µm), adjustable tool runout length, removable of broken tools, internal lubrication of holder, compatible with high-speed steel tools. [Applications]·Work material: Titaniu...Readmore

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 25	1 ～ 5	24 ～ 50	4	90 ～ 140	Stainless Steel[○] / Titanium[◎]	12 ～ 25	36 ～ 75	-	TiAlN	radius	Other	-

  From: 4,978,443 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL

  OSG

  [Features]·It supports grooving and side milling, complex pocket machining, and chatter-prone milling. It has achieved stability and high efficiency in titanium alloy machining, which has a high degree of difficulty. ·With grooved SAFE-LOCK, high runout accuracy (less than 3 µm), adjustable tool runout length, removable of broken tools, internal lubrication of holder, compatible with high-speed steel tools. [Applications]·Work material: Titaniu...Readmore

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 25	1 ～ 5	24 ～ 50	5	90 ～ 140	Stainless Steel[○] / Titanium[◎]	12 ～ 25	36 ～ 75	-	TiAlN	radius	Other	-

  From: 5,559,330 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius End Mill [2ACR (APEL2000R)]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	R0.5 ～ R1.0	13 ～ 26	2	90 ～ 110	-	6 ～ 12	-	-	TiAlN	radius	35°	±0.01

  From: 1,112,103 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Corner Radius End Mill [2ALR (APLS2000R)]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	R0.5 ～ R1.0	9 ～ 18	2	80 ～ 110	-	6 ～ 12	18 ～ 30	-	TiAlN	radius	35°	±0.01

  From: 1,271,893 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Radius End Mill [4ACR (APEL4000R)]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	R0.5 ～ R1.0	13 ～ 26	4	90 ～ 110	-	6 ～ 12	-	-	TiAlN	radius	35°	±0.01

  From: 1,161,356 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Shank Corner Radius End Mill [4ALR (APLS4000R)]

  HANSONG M&T

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	R0.5 ～ R1.0	9 ～ 18	4	80 ～ 110	-	6 ～ 12	18 ～ 30	-	TiAlN	radius	45°	±0.01

  From: 1,139,020 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	YG 1	HANSONG M&T	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	KYOWA SEIKO	KYOWA SEIKO	KABUSYUUKOUGU	OSG	OSG	HANSONG M&T	HANSONG M&T	HANSONG M&T	HANSONG M&T
Product SeriesDòng sản phẩm	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	4-Flute Radius	Corner Radius End Mill [4SUR]	GS MILL Roughing Radius GSRE-R	GS MILL Hard Radius GSH-R	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface	X's Mill Geo Radius 4GEOLS-R	GS MILL radius GS4-R	X's Mill Geo Radius 4XSGEO-R	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius	Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)	WX Super Radius End Mills	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank	WXS Coated Multiple Flutes Short Super	Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose	SAGVR2T SA Coated Carbide Radius 2-Flute	SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank	SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank	SCD2A End Mill with Corner R, 2-Flute, OK Coated	SCE4A Ultra-Strong Radius, 4-Flute, OK Coated	Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)	End Mill with 2 Carbide Flutes and Corner Radius KSRA-2	End Mill with 4 Carbide Flutes and Corner Radius KSRA-4	Carbide Radius End Mill, 4-Flute GM-4R	UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 4-Flute, UVX-TI-4FL-SL	UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL	Corner Radius End Mill [2ACR (APEL2000R)]	Long Shank Corner Radius End Mill [2ALR (APLS2000R)]	Corner Radius End Mill [4ACR (APEL4000R)]	Long Shank Corner Radius End Mill [4ALR (APLS4000R)]
From	2,491,666 VND	694,540 VND	1,124,130 VND	2,724,564 VND	2,369,290 VND	3,617,869 VND	4,045,000 VND	2,589,026 VND	2,325,028 VND	1,438,216 VND	1,963,261 VND	1,797,033 VND	2,200,308 VND	18,356,801 VND	2,274,865 VND	1,901,667 VND	2,041,359 VND	2,359,454 VND	4,149,996 VND	3,682,197 VND	4,444,485 VND	1,642,018 VND	3,310,003 VND	2,895,318 VND	1,836,506 VND	1,836,506 VND	2,665,286 VND	2,079,667 VND	1,886,934 VND	2,447,584 VND	262,320 VND	4,978,443 VND	5,559,330 VND	1,112,103 VND	1,271,893 VND	1,161,356 VND	1,139,020 VND
Days to ShipSố ngày giao hàng	15 Day(s) or more	4 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	17 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	15 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s)	7 Day(s)	7 Day(s)	7 Day(s) or more
Blade diameter (D)(φ)	3 ～ 20	1 ～ 20	1 ～ 20	6 ～ 20	6 ～ 20	1 ～ 5	6 ～ 12	6 ～ 8	3 ～ 20	3 ～ 12	3 ～ 20	0.5 ～ 2.5	2 ～ 4	16 ～ 20	3 ～ 10	2 ～ 13	3 ～ 20	6	6 ～ 25	8	10	3 ～ 20	6 ～ 25	6 ～ 25	4 ～ 12	4 ～ 12	6 ～ 10	3 ～ 20	0.5 ～ 3	1 ～ 3	3 ～ 12	12 ～ 25	12 ～ 25	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12
R Size(mm)	0.2 ～ 3	0.1 ～ 2	R0.1 ～ R4.0	0.5 ～ 4	0.2 ～ 2	0.3 ～ 1	0.2 ～ 1	0.1	0.2 ～ 2	0.2 ～ 2	0.2 ～ 3	0.1	0.1 ～ 1	2	0.2 ～ 2	0.5 ～ 3	0.2 ～ 3	0.5	0.2 ～ 3	0.3 ～ 2	0.5	0.5 ～ 5	0.3 ～ 8	0.3 ～ 8	0.2 ～ 2	0.5 ～ 2	0.5	0.2 ～ 1	-	-	0.2 ～ 3	1 ～ 5	1 ～ 5	R0.5 ～ R1.0	R0.5 ～ R1.0	R0.5 ～ R1.0	R0.5 ～ R1.0
Blade length (ℓ)(mm)	8 ～ 38	2.5 ～ 48	2.5 ～ 38	13 ～ 38	13 ～ 38	2 ～ 10	13 ～ 26	0.9 ～ 1.2	4.5 ～ 30	7.5 ～ 26	8 ～ 38	0.7 ～ 3.7	6 ～ 11	48 ～ 56	6 ～ 20	0.8 ～ 5.5	5 ～ 30	9	15 ～ 50	16	15	10 ～ 45	20 ～ 75	20 ～ 75	12 ～ 36	8 ～ 24	21 ～ 34	8 ～ 38	1.5 ～ 10	3 ～ 10	8 ～ 30	24 ～ 50	24 ～ 50	13 ～ 26	9 ～ 18	13 ～ 26	9 ～ 18
Number of flutes(sheet)	4	4	4	4	6 ～ 8	3	4	4	4	4	4	2	2	2	4	3 ～ 4	4	4	6 ～ 8	6	4	2	4	2	2	4	4	4	2	4	4	4	5	2	2	4	4
Overall Length (L)(mm)	60 ～ 125	50 ～ 100	50 ～ 100	50 ～ 100	50 ～ 100	60 ～ 70	90 ～ 110	90 ～ 100	60 ～ 200	45 ～ 75	50 ～ 125	50	40 ～ 70	140 ～ 160	50 ～ 70	60 ～ 110	60 ～ 160	50	90 ～ 180	60	130	50 ～ 115	120 ～ 230	120 ～ 230	70 ～ 110	70 ～ 110	60 ～ 90	60 ～ 125	60	60	50 ～ 75	90 ～ 140	90 ～ 140	90 ～ 110	80 ～ 110	90 ～ 110	80 ～ 110
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	-	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Stainless Steel[○] / Titanium[◎]	Stainless Steel[○] / Titanium[◎]	-	-	-	-
Shank diameter (d)(mm)	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6	6 ～ 12	6 ～ 8	6 ～ 20	6 ～ 12	6 ～ 20	6	4 ～ 6	16 ～ 20	6 ～ 10	6 ～ 12	6 ～ 20	6	6 ～ 25	8	8	6 ～ 20	6 ～ 25	6 ～ 25	6 ～ 12	6 ～ 12	6 ～ 10	6 ～ 20	3	3	4 ～ 12	12 ～ 25	12 ～ 25	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12
Underneck length (ℓ1)(mm)	-	-	-	-	-	4 ～ 15	-	9 ～ 12	12 ～ -	-	-	1.5 ～ 5	-	-	-	5 ～ 24	9 ～ 60	-	-	-	-	-	-	-	-	15 ～ 42	-	-	-	-	-	36 ～ 75	36 ～ 75	-	18 ～ 30	-	18 ～ 30
Machining Application	Plane / Side / Curved surface	Plane / Side / Groove / Plunging (Z feed)	-	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Groove	Plane / Side / Groove	Side	Side / Groove	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Side / Curved surface	-	-	-	-	-	-
Coating	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN
Type	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	Powerful Torsion (45°-60°)	-	43°	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Other	Other	35°	35°	35°	45°
R Precision(μm)	-	-	±0.02	-	-	-	-	-	-0.032～-0.059 ～ -0.014～-0.028	0～-0.030 ～ 0～-0.015	-0.032～-0.059 ～ -0.014～-0.028	-	-	-	-	-	-	-	-	-	-	0～+0.04	0～+0.04	0～+0.04	-	-	-	-	-	-	-	-	-	±0.01	±0.01	±0.01	±0.01

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	YG 1	HANSONG M&T	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	KYOWA SEIKO	KYOWA SEIKO	KABUSYUUKOUGU	OSG	OSG	HANSONG M&T	HANSONG M&T	HANSONG M&T	HANSONG M&T
Product SeriesDòng sản phẩm	ULTRA WX Micro Grain Carbide End Mills TiAlN Coated 4 Flutes Short with Corner Radius (Super Hard)	4-Flute Radius	Corner Radius End Mill [4SUR]	GS MILL Roughing Radius GSRE-R	GS MILL Hard Radius GSH-R	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 4 Flutes High Helix Short with Corner Radius	Cermet End Mills TiAlN coated 4 Flutes for finishing the bottom surface	X's Mill Geo Radius 4GEOLS-R	GS MILL radius GS4-R	X's Mill Geo Radius 4XSGEO-R	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius (φ6 shank)	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	ULTRA FX Micro Grain Carbide End Mills TiAlN coated 2 Flutes Long with Corner Radius	Micro Grain Carbide End Mills 4 Flutes with Corner Radius (Super Hard)	WX Super Radius End Mills	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated 4 Flutes for High Speed Pocket operation with HS Shank	WXS Coated Multiple Flutes Short Super	Micro Grain Carbide End Mills Multiple Flutes Short with Corner Radius	ULTRA FX SUPER Micro Grain Carbide End Mills TiAlN coated High Speed Multi-Purpose	SAGVR2T SA Coated Carbide Radius 2-Flute	SAGVR2LS SA Coating Carbide Radius 4-Flute Long Shank	SAGVR2LS SA Coating Carbide Radius 2-Flute Long Shank	SCD2A End Mill with Corner R, 2-Flute, OK Coated	SCE4A Ultra-Strong Radius, 4-Flute, OK Coated	Super One-Cut End Mill DZ-SOCM4 Type (Medium Blade Length) (With Rounded Corners)	Super One-Cut End Mill DZ-SOCS4 Type (Regular Blade Length) (With Rounded Corners)	End Mill with 2 Carbide Flutes and Corner Radius KSRA-2	End Mill with 4 Carbide Flutes and Corner Radius KSRA-4	Carbide Radius End Mill, 4-Flute GM-4R	UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 4-Flute, UVX-TI-4FL-SL	UVX Series, Unequal Lead End Mill for Titanium Alloy Machining, 5-Flute, UVX-TI-5FL-SL	Corner Radius End Mill [2ACR (APEL2000R)]	Long Shank Corner Radius End Mill [2ALR (APLS2000R)]	Corner Radius End Mill [4ACR (APEL4000R)]	Long Shank Corner Radius End Mill [4ALR (APLS4000R)]

Loading...Tải…