(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
27 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model
MISUMI
[Features]·R of tip is also effective in suppressing chipping·Half-moon shape with good discharge of cutting chip even with small diameter·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
- | - | Taper ball | general steel[◎] | - | 0.1 ~ 0.3 | 1 | 4 | 45 | For High Hardness (Silicon Group) |
From: 1,308,480 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Tapered End Mill NTE-2
NS TOOL
[Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, copper◎: aluminum alloy, resin
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 0.5 ~ 3 | Tapered square | general steel[◎] | 2 ~ 10 | - | 2 | 3 ~ 10 | 35 ~ 70 | Non-Coated |
From: 2,033,883 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MTE230 MUGEN-COATING Tapered End Mill
NS TOOL
[Features]・ MUGEN coating allows long taper machining lifespan.・ Available in series with sizes of ø0.2 to ø10 and one angle of 30' to 20° (ø6 or less).
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 0.2 ~ 10 | Tapered square | general steel[◎] | 0.8 ~ 35 | - | 2 | 4 ~ 20 | 45 ~ 100 | TiAlN |
From: 1,463,003 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
ATOM
A small diameter taper end mill that standardizes maximum taper angles up to 15 degrees.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
1° ~ 30′ | 0.1 ~ 3 | Tapered square | general steel[○] | 0.5 ~ 12 | - | 2 | 3 ~ 10 | 35 ~ 50 | - |
From: 1,616,248 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered end mill, 2-flute / regular model
MISUMI
[Features]·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 30 | 0.5 ~ 6 | Tapered square | general steel[◎] | 2 ~ 24 | - | 2 | 4 ~ 12 | 50 ~ 70 | For High Hardness (Silicon Group) |
From: 1,236,469 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
C-CTE 4000, UT Coat, 4-Flute Tapered
UNION TOOL
[Features]· Taper end mill with extensive variations from taper half angle of 30' to 7°
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 7 | 3 ~ 10 | Tapered square | general steel[◎] | 10 ~ 35 | - | 4 | 6 ~ 16 | 50 ~ 90 | TiCN |
From: 1,594,608 VND |
---|
Days to Ship: Số ngày giao hàng: 5 Day(s) or more |
You can add up to 6 items per a category to the compare list.
4-flute, Tapered Blade, Short Type MG-TPMS
OSG
A high-toughness carbide is used to achieve long lifespan in the medium and low speed range.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 3 | 2 ~ 12 | Tapered square | general steel[○] | 8 ~ 30 | - | 4 | 4 ~ 12 | 45 ~ 90 | Non-Coated |
From: 2,234,144 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered end mill, 4-flute / for deep ribbing
MISUMI
[Features]·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 2 | 0.4 ~ 2 | Tapered square | general steel[◎] | 2 ~ 12 | - | 4 | 3 ~ 4 | 40 ~ 50 | For High Hardness (Silicon Group) |
From: 1,722,224 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered ball end mill, 4-flute / long model
MISUMI
[Features]·Blade length can be selected according to depth of rib groove (Choose shortest blade length possible to maintain rigid)·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 2 | - | Taper ball | general steel[◎] | 4 ~ 30 | 0.3 ~ 1.25 | 4 | 4 ~ 6 | 45 ~ 70 | For High Hardness (Silicon Group) |
From: 1,717,808 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered end mill, 4-flute / regular
MISUMI
[Features]·Adoption of 4-flute shape makes it ideal for machining sloped side surfaces·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 5 | 3 ~ 10 | Tapered square | general steel[◎] | 12 ~ 35 | - | 4 | 4 ~ 16 | 60 ~ 90 | For High Hardness (Silicon Group) |
From: 1,721,981 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
2-flute, Tapered Blade, Short Type FX-MG-TPDS
OSG
FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 0.5 ~ 12 | Tapered square | general steel[◎] | 2 ~ 40 | - | 2 | 3 ~ 20 | 40 ~ 120 | TiAlN |
From: 2,094,276 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
2-flute, Tapered Blade, Short Type MG-TPDS
OSG
A high-toughness carbide is used to achieve long lifespan in the medium and low speed range.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 7 | 1 ~ 12 | Tapered square | general steel[○] | 5 ~ 40 | - | 2 | 4 ~ 20 | 45 ~ 110 | Non-Coated |
From: 2,017,359 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Rib Grooves, Taper End Type FXS-RB-TPE
OSG
A high-stiffness taper end mill that enables highly efficient machining of rib. It can also be used for side machining other than grooves.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 3 | 0.4 ~ 3 | Tapered square | general steel[◎] | 2 ~ 40 | - | multi-edged | 3 ~ 8 | 35 ~ 80 | TiAlN |
From: 2,708,041 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide End Mill (Trapezoidal Runner) MG-TRC
OSG
A taper flute end mill that can be used for trapezoidal runner machining. Uses high-toughness carbide.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
7 ~ 15 | 2 ~ 6 | Tapered square | general steel[○] | 4 ~ 12 | - | 2 | 4 ~ 12 | 45 ~ 75 | Non-Coated |
From: 2,596,895 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tapered Long Blade End Mill NTEL-2
NS TOOL
[Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminum alloy
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 1 ~ 3 | Tapered square | general steel[◎] | 10 ~ 20 | - | 2 | 4 ~ 16 | 45 ~ 100 | Non-Coated |
From: 2,637,419 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
NER-2 Trapezoidal Runner End Mill
NS TOOL
[Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎; copper, aluminum alloy
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
7 ~ 15 | 2 ~ 6 | Tapered square | general steel[◎] | 5 ~ 12 | - | 2 | 4 ~ 12 | 45 ~ 75 | Non-Coated |
From: 2,470,994 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
MRT425 MUGEN-COATING Tapered End Mill for Deep Ribbing
NS TOOL
NS's original high stiffness design enables high-precision and high-efficiency machining.[Work Material]○: Heat-treated steel, hardening steel (Up to 55 HRC), stainless steel, titanium alloy, aluminum alloy, resin◎: Carbon steel, steel alloy/tool steel, copper
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.25 ~ 3 | 0.2 ~ 3 | Tapered square | general steel[◎] | 2 ~ 40 | - | 4 | 3 ~ 6 | 40 ~ 80 | TiAlN |
From: 1,444,905 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Tapered End Mill NTE-4
NS TOOL
[Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 15 | 3 ~ 10 | Tapered square | general steel[◎] | 10 ~ 35 | - | 4 | 6 ~ 10 | 50 ~ 85 | Non-Coated |
From: 2,117,096 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
X Coated Taper End Mill NTE-2X
NS TOOL
[Work Material]○: Stainless steel, aluminum alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat-treated steel
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 1.5 | 0.5 ~ 2.5 | Tapered square | general steel[◎] | 2 ~ 4 | - | 2 | 3 ~ 4 | 35 ~ 45 | TiCN |
From: 2,491,846 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
X Coated Taper End Mill NTE-4X
NS TOOL
[Work Material]○: Stainless steel, aluminum alloy, copper, resin◎: Carbon steel, steel alloy/tool steel, heat-treated steel
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 5 | 3 ~ 10 | Tapered square | general steel[◎] | 10 ~ 35 | - | 4 | 6 ~ 10 | 50 ~ 85 | TiCN |
From: 2,533,354 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tapered Long Blade End Mill NTEL-4
NS TOOL
[Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 2.5 | 3 ~ 6 | Tapered square | general steel[◎] | 20 ~ 35 | - | 4 | 6 ~ 10 | 60 ~ 85 | Non-Coated |
From: 2,970,465 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Tapered Medium Blade End Mill NTEM-2
NS TOOL
[Work Material]○: Carbon steel, steel alloy/tool steel, heat-treated steel, stainless steel, resin◎: Aluminum alloy, copper
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 1 ~ 4 | Tapered square | general steel[◎] | 5 ~ 20 | - | 2 | 4 ~ 16 | 50 ~ 90 | Non-Coated |
From: 2,221,160 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
X Coated Taper Medium Blade End Mill NTEM-2X
NS TOOL
Medium type taper end mill.Tool material, Ultrafine grain cemented carbideHelix angle, 30°Surface treatment, X coatingNo. of Flutes: 2Machining applications: Grooving, side milling
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 15 | 0.5 ~ 6 | Tapered square | general steel[◎] | 4 ~ 30 | - | 2 | 3 ~ 16 | 35 ~ 90 | Non-Coated |
From: 2,845,548 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Air Wheel Solid Taper End Mill
EIKOSHA
Graphite Electrode Milling, with Air Wheel
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 7 | 4 ~ 12 | Tapered square | general steel[○] | 25 ~ 50 | - | 2 | 6 ~ 20 | 90 ~ 120 | Non-Coated |
From: 3,262,790 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Taper End Mill (Medium)
EIKOSHA
Taper square end mill with strong hardness (carbide).[Features]·Tapered edge shape for machining inclined parts with equal helix.[Applications]·Ideal for taper milling.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
1゚ ~ 30' | 0.5 ~ 10 | Tapered square | general steel[◎] | 4 ~ 40 | - | 2 | 3 ~ 25 | 40 ~ 110 | Non-Coated |
From: 1,537,953 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Tapered End Mill CSTE
EIKOSHA
Carbide tapered square end mill (carbide).[Features]· End mill with a tapered blade for machining of inclined parts.[Applications]· Optimal for milling taper parts.· Optimal for tapered-wall machining.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
1゚ ~ 30' | 0.5 ~ 16 | Tapered square | general steel[◎] | 2 ~ 65 | - | 2 | 3 ~ 32 | 35 ~ 140 | Non-Coated |
From: 1,504,314 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
Carbide Solid Tapered End Mill (Long) CSTEL
EIKOSHA
[Features]· 2-flute carbide solid tapered end mill.· Long blade.· For wall tapering.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
1゚ ~ 30' | 1 ~ 6 | Tapered square | general steel[◎] | 10 ~ 35 | - | 2 | 4 ~ 12 | 50 ~ 90 | Non-Coated |
From: 2,372,668 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy