(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Brand |
|
---|---|
CAD |
|
Days to Ship |
|
6 itemsMặt hàng
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model
MISUMI
[Features]·R of tip is also effective in suppressing chipping·Half-moon shape with good discharge of cutting chip even with small diameter·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
- | - | Taper ball | High Hardness Steel-HRC60[○] | - | 0.1 ~ 0.3 | 1 | 4 | 45 | For High Hardness (Silicon Group) |
From: 1,308,480 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered end mill, 4-flute / for deep ribbing
MISUMI
[Features]·Since the cutting edge has been processed into a sharp corner, it is also possible to machining corner edges·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 2 | 0.4 ~ 2 | Tapered square | High Hardness Steel-HRC60[○] | 2 ~ 12 | - | 4 | 3 ~ 4 | 40 ~ 50 | For High Hardness (Silicon Group) |
From: 1,722,224 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered ball end mill, 4-flute / long model
MISUMI
[Features]·Blade length can be selected according to depth of rib groove (Choose shortest blade length possible to maintain rigid)·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 2 | - | Taper ball | High Hardness Steel-HRC60[○] | 4 ~ 30 | 0.3 ~ 1.25 | 4 | 4 ~ 6 | 45 ~ 70 | For High Hardness (Silicon Group) |
From: 1,717,808 VND |
---|
Days to Ship: Số ngày giao hàng: 4 Day(s) or more |
You can add up to 6 items per a category to the compare list.
TSC series carbide tapered end mill, 4-flute / regular
MISUMI
[Features]·Adoption of 4-flute shape makes it ideal for machining sloped side surfaces·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 5 | 3 ~ 10 | Tapered square | High Hardness Steel-HRC60[○] | 12 ~ 35 | - | 4 | 4 ~ 16 | 60 ~ 90 | For High Hardness (Silicon Group) |
From: 1,721,981 VND |
---|
Days to Ship: Số ngày giao hàng: Same day or more |
You can add up to 6 items per a category to the compare list.
2-flute, Tapered Blade, Short Type FX-MG-TPDS
OSG
FX coating enables high efficiency and long service life. Can be used with a wide range of materials, from general materials to hardened steel.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 20 | 0.5 ~ 12 | Tapered square | High Hardness Steel-HRC60[○] | 2 ~ 40 | - | 2 | 3 ~ 20 | 40 ~ 120 | TiAlN |
From: 2,094,276 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
You can add up to 6 items per a category to the compare list.
For Rib Grooves, Taper End Type FXS-RB-TPE
OSG
A high-stiffness taper end mill that enables highly efficient machining of rib. It can also be used for side machining other than grooves.
Single corner (θ)(Degree) | Tip diameter (D)(φ) | Type | work material | Blade length (l)(mm) | R Size(mm) | Number of flutes(sheet) | Shank diameter (d)(mm) | Overall Length (L)(mm) | Coating |
---|---|---|---|---|---|---|---|---|---|
0.5 ~ 3 | 0.4 ~ 3 | Tapered square | High Hardness Steel-HRC60[○] | 2 ~ 40 | - | multi-edged | 3 ~ 8 | 35 ~ 80 | TiAlN |
From: 2,708,041 VND |
---|
Days to Ship: Số ngày giao hàng: 6 Day(s) or more |
BrandNhãn hiệu |
---|
Product SeriesDòng sản phẩm |
From |
Days to ShipSố ngày giao hàng |
SpecificationsĐặc điểm kĩ thuật |
Single corner (θ)(Degree) |
Tip diameter (D)(φ) |
Type |
work material |
Blade length (l)(mm) |
R Size(mm) |
Number of flutes(sheet) |
Shank diameter (d)(mm) |
Overall Length (L)(mm) |
Coating |
You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. | |
BrandNhãn hiệu | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG |
Product SeriesDòng sản phẩm | TSC series carbide tapered ball end mill (for engraving), 1-flute / crescent model | TSC series carbide tapered end mill, 4-flute / for deep ribbing | TSC series carbide tapered ball end mill, 4-flute / long model | |||
From | 1,308,480 VND | 1,722,224 VND | 1,717,808 VND | 1,721,981 VND | 2,094,276 VND | 2,708,041 VND |
Days to ShipSố ngày giao hàng | 4 Day(s) or more | Same day or more | 4 Day(s) or more | Same day or more | 6 Day(s) or more | 6 Day(s) or more |
SpecificationsĐặc điểm kĩ thuật |
|
|
|
| ||
Single corner (θ)(Degree) | - | 0.5 ~ 2 | 0.5 ~ 2 | 0.5 ~ 5 | 0.5 ~ 20 | 0.5 ~ 3 |
Tip diameter (D)(φ) | - | 0.4 ~ 2 | - | 3 ~ 10 | 0.5 ~ 12 | 0.4 ~ 3 |
Type | Taper ball | Tapered square | Taper ball | Tapered square | Tapered square | Tapered square |
work material | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] | High Hardness Steel-HRC60[○] |
Blade length (l)(mm) | - | 2 ~ 12 | 4 ~ 30 | 12 ~ 35 | 2 ~ 40 | 2 ~ 40 |
R Size(mm) | 0.1 ~ 0.3 | - | 0.3 ~ 1.25 | - | - | - |
Number of flutes(sheet) | 1 | 4 | 4 | 4 | 2 | multi-edged |
Shank diameter (d)(mm) | 4 | 3 ~ 4 | 4 ~ 6 | 4 ~ 16 | 3 ~ 20 | 3 ~ 8 |
Overall Length (L)(mm) | 45 | 40 ~ 50 | 45 ~ 70 | 60 ~ 90 | 40 ~ 120 | 35 ~ 80 |
Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | TiAlN |
Loading...Tải…
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy