(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- Thể lệ và Giải thưởng cuộc thi "Thiết kế máy Tự động hóa 2025" do MISUMI Việt Nam tổ chức. Xem chi tiết.
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more.
Square HSS End Mills（Tool Material Type：Cobalt HSS）
[Misumi's High Speed Steel End Mill]
In addition to the difference in blade length from short size to long size, non-coated items from minimum φ1 to maximum φ50 are available in extensive sizes.
Search by specifying the lower class categoryTìm kiếm bằng cách chỉ định danh mục lớp thấp hơn
Brand |
|
|---|---|
Filter By |
|
| CAD |
|
| Days to Ship |
|
186 itemsMặt hàng
- Sort By
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 4 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 216,421 VND Days to Ship: Số ngày giao hàng: Same day or more 
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 258,103 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
- On Sale Till 31/03/2025
2-flute, General-purpose, Short Type EDS
OSG
High-speed steel square series.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.45 ～ 60 1.1 ～ 80 6 ～ 42 2 45 ～ 170 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 543,333 VND Special Price Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 70 6 ～ 42 4 50 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts AG Square Standard torsion (30-40°) - Cobalt HSS - - From: 641,699 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Flute H.S.S End Mill (Uncoated/TIN/TICN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 40 8 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 220,258 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G 2-Flute End Mill for Key Groove GLKEY
NACHI(FUJIKOSHI)
End mill for key groove machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 20 6 ～ 20 6 ～ 20 2 50 ～ 85 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Weak torsion (15 to 25˚) - Cobalt HSS - - From: 599,994 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square regular blade length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 25 3.5 ～ 60 6 ～ 25 2 45 ～ 130 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 307,571 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts AG Square Standard torsion (30-40°) - Cobalt HSS - - From: 576,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
NACHI(FUJIKOSHI)
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 344,833 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 15 ～ 70 6 ～ 42 4 ～ 6 60 ～ 160 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiAlN / Non-Coated Roughing Standard torsion (30-40°) - Cobalt HSS - - From: 799,720 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G Standard End Mill, 2-Flute 2GE
NACHI(FUJIKOSHI)
[Features]· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.· It is suitable for side processing
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2 ～ 70 6 ～ 42 2 50 ～ 160 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 585,240 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-flute, General-purpose, Long Type EDL
OSG
General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 0.8 ～ 40 6 ～ 110 6 ～ 32 2 50 ～ 195 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 653,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 2 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN Square Standard torsion (30-40°) - Cobalt HSS - - From: 163,955 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
2-Flute Long End Mill (M42 HSS)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 50 10 ～ 125 6 ～ 42 2 60 ～ 215 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 324,171 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute H.S.S End Mill (Uncoated/TIN/TICN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 3.5 ～ 75 6 ～ 42 2 55 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiCN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 220,258 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
[Features]·High-speed steel roughing short flute length type with standard TiAlN coating·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- TiAlN
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 30 13 ～ 45 6 ～ 25 3 ～ 6 57 ～ 121 general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiAlN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 649,146 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS
OSG
[Features]· Adopts TiN coating with excellent weld resistance and abrasion resistance.· Those with outer diameter of 41 mm or more have center holes.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 50 7 ～ 75 6 ～ 42 4 ～ 6 50 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 865,000 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 60 20 ～ 300 6 ～ 42 4 60 ～ 395 general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] Plane / Side Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 526,028 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 8 ～ 75 6 ～ 42 4 ～ 6 55 ～ 165 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 760,406 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
4-Flute Long End Mill (M42 HSS)
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 50 10 ～ 125 6 ～ 42 4 60 ～ 215 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts TiAlN / Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 344,432 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
H.S.S Roughing End Mill (Uncoated/TIN/TICN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 16 ～ 112 6 ～ 108 4 ～ 6 48 ～ 214 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove TiCN / Non-Coated Roughing Standard torsion (30-40°) Available / None Cobalt HSS - Straight From: 560,237 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 32 - 6 ～ 32 4 ～ 6 68 ～ 186 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove TiCN / Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - Straight From: 491,283 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-Flute Short H.S.S End Mill (Uncoated/TIN)
OSG KOREA CORP
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 15 8 ～ 30 6 ～ 16 2 50 ～ 95 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN / Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - Straight From: 235,607 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AS Coated High-Speed Steel Square End Mill, 2-Flute / Long
MISUMI
[Features]·Suitable for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- AS
- 2 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 2 60 ～ 195 general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking For High Hardness (Silicon Group) Square Standard torsion (30-40°) Available Cobalt HSS - - From: 546,746 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model
MISUMI
[Features]·High-speed steel uncoated square short flute length 2-flute type with up to ø50·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1 ～ 50 2.5 ～ 75 6 ～ 42 2 45 ～ 165 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 290,681 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model
MISUMI
[Features]·Uncoated 4-flute long flute length type·Effective for side milling with 40° helix angle, which is stronger than standard helix angle·Suitable for deep cavity milling·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 110 6 ～ 32 4 60 ～ 195 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Countersinking Non-Coated Square Standard torsion (30-40°) Available Cobalt HSS - - From: 424,343 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Super Hard, Long 4-Flute SL4SE
NACHI(FUJIKOSHI)
General purpose end mill. Suitable for side processing of wide side surfaces and deep positions.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 125 6 ～ 32 4 60 ～ 210 general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 597,043 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
AG Mill, 2-Flute Mill, Medium 2AGEM
NACHI(FUJIKOSHI)
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 20 3 ～ 45 6 ～ 20 2 50 ～ 110 general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiAlN Square Standard torsion (30-40°) - Cobalt HSS - - From: 576,388 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
G Long End Mill, 4-Flute SL4GE
NACHI(FUJIKOSHI)
General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 40 15 ～ 125 6 ～ 32 4 60 ～ 210 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Standard torsion (30-40°) - Cobalt HSS - - From: 744,190 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
2-flute, Long Shank, Medium Type LS-EDN
OSG
General-purpose 2-flute end mill long shank medium type using cobalt high-speed steel as the base material. It can be used for long protrusion processing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 40 25 ～ 65 10 ～ 32 2 125 ～ 235 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,091,667 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
Short Type, 4-Flute Multi-Flute Center Cut CC-EMS
OSG
Cobalt high-speed steel center cut.Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/CopperCoating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.): 4Helix angle: Standard helix (30 to 44°)
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2.5 ～ 40 10 ～ 65 6 ～ 32 4 50 ～ 150 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 603,333 VND Days to Ship: Số ngày giao hàng: Same day or more
Same day or more
-
You can add up to 6 items per a category to the compare list.
End Mill (Multi-Flute Long Shank Short Type) LS-EMS
OSG
General-purpose 4-flute end mill long shank short type using cobalt high-speed steel as the base material. It can be used for long protrusion processing.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 25 ～ 75 10 ～ 42 4 125 ～ 340 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,170,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
End Mill (2-Flute for Stainless Steel) SUS-EDS
OSG
2-flute end mill short type for stainless steel using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 1.5 ～ 30 4 ～ 55 6 ～ 25 2 45 ～ 125 general steel[○] / Stainless Steel[◎] Plane / Side / Groove / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - Straight From: 666,667 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG
General-purpose heavy-cutting roughing end mill short type using cobalt high-speed steel as the base material.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 13 ～ 75 6 ～ 42 4 ～ 6 57 ～ 177 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove Non-Coated Roughing Standard torsion (30-40°) - Cobalt HSS - Straight From: 1,173,333 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
WXL Coated End Mill (Roughing Medium Fine Pitch Type) WH-RENF
OSG
It is a next-generation high-speed steel roughing end mill that can cut a wide range of dry and wet.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 40 16 ～ 95 6 ～ 32 4 ～ 6 80 ～ 200 general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] Plane / Side / Groove - Roughing Standard torsion (30-40°) - Cobalt HSS - Straight From: 2,066,667 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
OSG
The roughing and finishing end mill features a unique trapezoid blade shape derived from consideration for finishing cutting as well as heavy cutting. Nick perpendicular to shaft which withstands heavy cutting and boasts great blade tip strength.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 12 ～ 50 40 ～ 120 12 ～ 42 4 ～ 8 90 ～ 210 general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove Non-Coated Roughing Weak torsion (15 to 25˚) - Cobalt HSS - Straight From: 2,945,000 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
For 2-Flute Keyway EX-TIN-EKD (OL1)
OSG
TiN coated 2-flute keyway end mill with a cutting diameter tolerance of 0 to -0.02.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 25 5 ～ 25 6 ～ 25 2 50 ～ 95 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] Plane / Side / Groove / Inclined Cuts TiN Square Weak torsion (15 to 25˚) - Cobalt HSS - Straight From: 776,667 VND Days to Ship: Số ngày giao hàng: 17 Day(s)
17 Day(s)
-
You can add up to 6 items per a category to the compare list.
S-FPαS, S Coating Fine Pitch Short Flute
SANKO MFG
Fine pitch type roughing endmill with TiCN coating. Machining allowance can be reduced when performing finish machining.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 50 10 ～ 80 6 ～ 42 4 ～ 6 70 ～ 200 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove / Inclined Cuts TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,189,563 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-FPαL S-Coating Fine Pitch Long Flute
SANKO MFG
[Features]· Fine pitch type roughing endmill with S coating.· Machining allowance can be reduced when performing finish machining.· Enables a wide range of machining and deep engraving, due to the long flute length.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 10 ～ 50 45 ～ 150 10 ～ 42 4 ～ 6 100 ～ 270 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] Plane / Side / Groove TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 2,445,814 VND Days to Ship: Số ngày giao hàng: 8 Day(s) or more
8 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
S-SUSα S Coating for Stainless Steel Groove Processing
SANKO MFG
Flat nick type roughing endmill with TiCN coating. Ideal for grooving of stainless steel.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 30 5 ～ 55 6 ～ 25 3 ～ 4 55 ～ 165 general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○] Groove TiCN Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 1,079,577 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Normal pitch type roughing end mill.Blade typeMaterials: Hs-Co (cobalt high-speed steel)Helix angle: 30°nick shape: standard pitch nick
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 5 ～ 60 10 ～ 95 6 ～ 42 4 ～ 6 70 ～ 210 general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] Plane / Side / Groove / Inclined Cuts Non-Coated Roughing Standard torsion (30-40°) Available Cobalt HSS - - From: 793,873 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
Endmill dedicated for key groove machining. The outer diameter tolerance is positive.
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 3 ～ 25 5 ～ 25 6 ～ 25 2 50 ～ 95 general steel[○] / Quenched and tempered steel[○] / Aluminum[○] Groove Non-Coated Square Weak torsion (15 to 25˚) Available Cobalt HSS - - From: 466,225 VND Days to Ship: Số ngày giao hàng: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
SANKO MFG
A straight blade type 2-flutes end mill.Materials: HS-Co (cobalt high-speed steel)Outer diameter tolerance: -0.03 to 0Straight Blade
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 2 ～ 49 10 ～ 60 6 ～ 32 2 60 ～ 170 general steel[○] / Quenched and tempered steel[○] Plane / Side / Groove / Inclined Cuts Non-Coated Square No torsion Available Cobalt HSS - - From: 414,488 VND Days to Ship: Số ngày giao hàng: 6 Day(s) or more
6 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 50 - - 2 ～ 4 - general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts Non-Coated Square Standard torsion (30-40°) - Cobalt HSS - - From: 795,792 VND Days to Ship: Số ngày giao hàng: 7 Day(s)
7 Day(s)
-
You can add up to 6 items per a category to the compare list.
YG 1
Blade diameter (D)(φ) Blade length (ℓ)(mm) Shank diameter (d)(mm) Number of flutes(sheet) Overall Length (L)(mm) work material Machining Application Coating Blade shape type Torsion Angle (θ) Base Blade Y/N Tool Material Type Underneck length (ℓ1)(mm) shank 6 ～ 30 13 ～ 45 6 ～ 25 3 ～ 6 57 ～ 121 general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] Plane / Side / Groove TiAlN / Non-Coated Roughing Standard torsion (30-40°) - Cobalt HSS - - From: 898,883 VND Days to Ship: Số ngày giao hàng: 4 Day(s) or more
4 Day(s) or more
| BrandNhãn hiệu |
|---|
| Product SeriesDòng sản phẩm |
| From |
| Days to ShipSố ngày giao hàng |
| SpecificationsĐặc điểm kĩ thuật |
| Blade diameter (D)(φ) |
| Blade length (ℓ)(mm) |
| Shank diameter (d)(mm) |
| Number of flutes(sheet) |
| Overall Length (L)(mm) |
| work material |
| Machining Application |
| Coating |
| Blade shape type |
| Torsion Angle (θ) |
| Base Blade Y/N |
| Tool Material Type |
| Underneck length (ℓ1)(mm) |
| shank |
You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. 
| You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.    | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | |
| BrandNhãn hiệu | YG 1 | NACHI(FUJIKOSHI) | OSG | NACHI(FUJIKOSHI) | OSG KOREA CORP | NACHI(FUJIKOSHI) | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | YG 1 | NACHI(FUJIKOSHI) | OSG | YG 1 | YG 1 | OSG KOREA CORP | MISUMI | OSG | SANKO MFG | SANKO MFG | YG 1 | OSG KOREA CORP | OSG KOREA CORP | OSG KOREA CORP | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | SANKO MFG | YG 1 | YG 1 |
| Product SeriesDòng sản phẩm | High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model | TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut | High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model | WXL Coated End Mill (Roughing Medium Fine Pitch Type) WH-RENF | ||||||||||||||||||||||||||||||||||||||||
| From | 216,421 VND | 258,103 VND | 543,333 VND Special Price On Sale Till 31/03/2025 | 641,699 VND | 220,258 VND | 599,994 VND | 307,571 VND | 576,388 VND | 344,833 VND | 799,720 VND | 585,240 VND | 653,333 VND | 163,955 VND | 324,171 VND | 220,258 VND | 649,146 VND | 865,000 VND | 526,028 VND | 760,406 VND | 344,432 VND | 560,237 VND | 491,283 VND | 235,607 VND | 546,746 VND | 290,681 VND | 424,343 VND | 597,043 VND | 576,388 VND | 744,190 VND | 1,091,667 VND | 603,333 VND | 1,170,000 VND | 666,667 VND | 1,173,333 VND | 2,066,667 VND | 2,945,000 VND | 776,667 VND | 1,189,563 VND | 2,445,814 VND | 1,079,577 VND | 793,873 VND | 466,225 VND | 414,488 VND | 795,792 VND | 898,883 VND |
| Days to ShipSố ngày giao hàng | Same day or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 6 Day(s) or more | Same day or more | 6 Day(s) or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | Same day or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | Same day or more | 4 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 17 Day(s) | Same day or more | 17 Day(s) | 17 Day(s) | 17 Day(s) | 17 Day(s) | 17 Day(s) | 17 Day(s) | 6 Day(s) or more | 8 Day(s) or more | 6 Day(s) or more | 6 Day(s) or more | 7 Day(s) or more | 6 Day(s) or more | 7 Day(s) | 4 Day(s) or more |
| SpecificationsĐặc điểm kĩ thuật |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Blade diameter (D)(φ) | 1 ～ 50 | 2.5 ～ 50 | 0.45 ～ 60 | 2.5 ～ 50 | 2 ～ 40 | 3 ～ 20 | 1 ～ 25 | 1 ～ 50 | 1 ～ 50 | 6 ～ 50 | 1 ～ 50 | 0.8 ～ 40 | 1 ～ 50 | 2 ～ 50 | 1 ～ 50 | 5 ～ 30 | 2.5 ～ 50 | 3 ～ 60 | 5 ～ 50 | 2 ～ 50 | 6 ～ 50 | 6 ～ 32 | 3 ～ 15 | 3 ～ 40 | 1 ～ 50 | 3 ～ 40 | 3 ～ 40 | 1.5 ～ 20 | 3 ～ 40 | 10 ～ 40 | 2.5 ～ 40 | 10 ～ 50 | 1.5 ～ 30 | 6 ～ 50 | 6 ～ 40 | 12 ～ 50 | 3 ～ 25 | 5 ～ 50 | 10 ～ 50 | 3 ～ 30 | 5 ～ 60 | 3 ～ 25 | 2 ～ 49 | 6 ～ 50 | 6 ～ 30 |
| Blade length (ℓ)(mm) | 2.5 ～ 75 | 7 ～ 70 | 1.1 ～ 80 | 7 ～ 70 | 8 ～ 65 | 6 ～ 20 | 3.5 ～ 60 | 2 ～ 70 | 2 ～ 70 | 15 ～ 70 | 2 ～ 70 | 6 ～ 110 | 2.5 ～ 75 | 10 ～ 125 | 3.5 ～ 75 | 13 ～ 45 | 7 ～ 75 | 20 ～ 300 | 8 ～ 75 | 10 ～ 125 | 16 ～ 112 | - | 8 ～ 30 | 15 ～ 110 | 2.5 ～ 75 | 15 ～ 110 | 15 ～ 125 | 3 ～ 45 | 15 ～ 125 | 25 ～ 65 | 10 ～ 65 | 25 ～ 75 | 4 ～ 55 | 13 ～ 75 | 16 ～ 95 | 40 ～ 120 | 5 ～ 25 | 10 ～ 80 | 45 ～ 150 | 5 ～ 55 | 10 ～ 95 | 5 ～ 25 | 10 ～ 60 | - | 13 ～ 45 |
| Shank diameter (d)(mm) | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 20 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 108 | 6 ～ 32 | 6 ～ 16 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 32 | 6 ～ 20 | 6 ～ 32 | 10 ～ 32 | 6 ～ 32 | 10 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 32 | 12 ～ 42 | 6 ～ 25 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | - | 6 ～ 25 |
| Number of flutes(sheet) | 4 | 4 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 4 ～ 6 | 2 | 2 | 2 | 2 | 2 | 3 ～ 6 | 4 ～ 6 | 4 | 4 ～ 6 | 4 | 4 ～ 6 | 4 ～ 6 | 2 | 2 | 2 | 4 | 4 | 2 | 4 | 2 | 4 | 4 | 2 | 4 ～ 6 | 4 ～ 6 | 4 ～ 8 | 2 | 4 ～ 6 | 4 ～ 6 | 3 ～ 4 | 4 ～ 6 | 2 | 2 | 2 ～ 4 | 3 ～ 6 |
| Overall Length (L)(mm) | 55 ～ 165 | 50 ～ 160 | 45 ～ 170 | 50 ～ 160 | 50 ～ 150 | 50 ～ 85 | 45 ～ 130 | 50 ～ 160 | 50 ～ 160 | 60 ～ 160 | 50 ～ 160 | 50 ～ 195 | 55 ～ 165 | 60 ～ 215 | 55 ～ 165 | 57 ～ 121 | 50 ～ 165 | 60 ～ 395 | 55 ～ 165 | 60 ～ 215 | 48 ～ 214 | 68 ～ 186 | 50 ～ 95 | 60 ～ 195 | 45 ～ 165 | 60 ～ 195 | 60 ～ 210 | 50 ～ 110 | 60 ～ 210 | 125 ～ 235 | 50 ～ 150 | 125 ～ 340 | 45 ～ 125 | 57 ～ 177 | 80 ～ 200 | 90 ～ 210 | 50 ～ 95 | 70 ～ 200 | 100 ～ 270 | 55 ～ 165 | 70 ～ 210 | 50 ～ 95 | 60 ～ 170 | - | 57 ～ 121 |
| work material | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Stainless Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Titanium[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] | general steel[○] / Quenched and tempered steel[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Aluminum[○] / Copper[○] |
| Machining Application | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove | Groove | Plane / Side / Groove / Inclined Cuts | Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove |
| Coating | TiAlN / Non-Coated | Non-Coated | Non-Coated | AG | TiCN / Non-Coated | TiN | Non-Coated | AG | Non-Coated | TiAlN / Non-Coated | TiN | Non-Coated | TiAlN | TiAlN / Non-Coated | TiCN / Non-Coated | TiAlN | TiN | Non-Coated | Non-Coated | TiAlN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiN / Non-Coated | For High Hardness (Silicon Group) | Non-Coated | Non-Coated | Non-Coated | TiAlN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | Non-Coated | TiN | TiCN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN / Non-Coated |
| Blade shape type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Roughing | Square | Square | Roughing | Square | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Roughing | Roughing | Roughing | Square | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Roughing |
| Torsion Angle (θ) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | Weak torsion (15 to 25˚) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Standard torsion (30-40°) | Weak torsion (15 to 25˚) | No torsion | Standard torsion (30-40°) | Standard torsion (30-40°) |
| Base Blade Y/N | - | - | - | - | Available | - | Available | - | - | - | - | - | - | - | Available | Available | - | Available | Available | - | Available / None | Available | Available | Available | Available | Available | - | - | - | - | - | - | - | - | - | - | - | Available | Available | Available | Available | Available | Available | - | - |
| Tool Material Type | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS | Cobalt HSS |
| Underneck length (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| shank | - | - | Straight | - | Straight | - | - | - | - | - | - | Straight | - | - | Straight | - | Straight | - | - | - | Straight | Straight | Straight | - | - | - | - | - | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - |
Loading...Tải…
ConfigureTạo
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Blade diameter (D)(φ)
-
0.45～0.95
- 0.45
- 0.8
- 0.9
- 0.95
-
1～1.9
- 1
- 1/2
- 1/4
- 1/8
- 1.05
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3/16
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-3/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-16/0.01φ Unit(s)][17-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Blade length (ℓ)(mm)
-
Shank diameter (d)(mm)
-
Number of flutes(sheet)
-
Overall Length (L)(mm)
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Other
- Other 2
- Other 3
- Other 4
-
Machining Application
-
Coating
-
Blade shape type
- Square
- Roughing
- For Keyway
-
Torsion Angle (θ)
-
Base Blade Y/N
-
Tool Material Type
- Cobalt HSS
- Powder high-speed steel
- High-speed steel
- Alloy HSS
-
Underneck length (ℓ1)(mm)
-
shank
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy