Cutters / Indexable End Mills（Machining Application：Side）

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 590 Cutter

  SANDVIK

  A light-cutting face milling cuter suitable for high-speed finishing[Features]The tool is designed with a serrated-tip interface for increased stability and reduced run-out

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	63mm ～ 160mm	Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper	Finishing	40 ～ 63	5 ～ 10	Arbor	22 ～ 40	-	-	Carbide Coat

  From: 30,615,236 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEC Type End Mill

  KYOCERA

  Shoulder grinding, groove cutting, and plane surface grinding are all possible.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	10 ～ 50	-	-	80 ～ 250	1 ～ 5	-	10 ～ 32	-	-	-

  From: 4,130,914 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEC Type Face Mill

  KYOCERA

  Shoulder grinding, groove cutting, and plane surface grinding are all possible.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	4 ～ 11	-	-	-	-	-

  From: 9,013,691 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  CoroMill 390 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	80mm ～ 160mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Finishing	50 ～ 63	7 ～ 12	Arbor	25.4 ～ 50.8	-	15.4 ～ 15.7	Carbide Coat

  From: 26,023,926 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEW Type End Mill Holder

  KYOCERA

  Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 50	-	-	100 ～ 170	2 ～ 5	-	12 ～ 32	-	-	-

  From: 5,387,165 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type

  OSG

  The wide insert pocket improves chip removal capability, and the employment of a body relief shape that supports 3D machining enables highly efficient shape machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	10 ～ 88	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	40 ～ 250	2 ～ 10	With handle / Arbor	20 ～ 42	50 ～ 120	-	Carbide Coat / No Carbide Coat

  From: 6,032,799 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3D End Mill MEY Type

  KYOCERA

  [Features]·This product is capable of digging, drilling, shoulder milling, deep cutting, and face milling.Anti-seize agent: P-37Row of blades: 2

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 50	-	-	120 ～ 250	4 ～ 7	-	16 ～ 42	-	-	-

  From: 6,622,171 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NEW Tiko Cutter

  FUJIGEN

  Ideal for use in low-rigidity machines such as tapping centers.[Features]· Small diameter shank lineup allows use for small machining.· Unique negative/positive method prevents chatter even with thin objects (can machining, etc.)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	60 ～ 80	general steel / Stainless Steel / Aluminum / Resin	Finishing	120	3	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)

  From: 10,626,988 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 490 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	40mm ～ 250mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	Rough and medium rough processing / Finishing	-	4 ～ 16	Arbor	16 ～ 60	-	5.5 ～ 10	Carbide Coat

  From: 15,916,196 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSF SS Phoenix Series 4 Corner Shoulder Milling Cutter Straight Shank Type

  OSG

  [Specifications]· Shape: Cutter· Blade Tip Replacement Type End Mill[Applications] Flat surfaces, side surfaces, grooves

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	25 ～ 40	-	-	120 ～ 140	3 ～ 5	With handle	25 ～ 32	35 ～ 50	-	-

  From: 7,941,398 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Mill, CHE-R Type

  SUMITOMO ELECTRIC HARDMETAL

  [Applications]Can be used for side milling, grooving, rough cutting, and medium-rough cutting. [Features]Can be used for machining a wide range of steel materials such as general steel, carbon steel, and stainless steel.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 80	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	100 ～ 160	1 ～ 4	With handle	16 ～ 32	25 ～ 45	8 ～ 16	-

  From: 2,754,596 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEW Type Face Mill

  KYOCERA

  Be aware that chips or parts may scatter due to centrifugal force if accidentally rotating at the maximum rotation speed or higher.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	4 ～ 6	-	-	-	-	-

  From: 9,818,077 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECH Type End Mill (With Coolant Holes at Tip Blade)

  KYOCERA

  [Applications]Can be used for shoulder milling and face milling. [Features]This product has a coolant hole to the tip blade.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	25 ～ 50	-	-	120 ～ 185	8 ～ 42	-	25 ～ 42	-	-	-

  From: 13,301,784 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter, EMP01 Series

  KABUSYUUKOUGU

  [Features]EMP01 series milling machine cutter.[Applications]Suitable for flat surfaces, sides surfaces, grooves, and plunges.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	12 ～ 25	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum	-	85 ～ 115	1 ～ 3	With handle	16 ～ 25	25 ～ 35	10.5 ～ 15.5	-

  From: 1,338,435 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	90 ～ 190	2 ～ 6	With handle	16 ～ 32	25 ～ 90	-	Carbide Coat / No Carbide Coat

  From: 6,288,141 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Small Diameter Cutter, SRF Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ The small diameter cutter for aluminum alloys SRF type is a high performance small-sized cutter that is ideal for machining aluminum alloy parts on small-sized machines.・ The simple design of the insert direct-mount method and the simple fine adjustment mechanism ensure the accuracy of flute runout.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	30 ～ 63	Aluminum	Rough and medium rough processing	-	3 ～ 6	Arbor	-	-	5	-

  From: 13,779,419 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WFX Model WFX-E

  SUMITOMO ELECTRIC HARDMETAL

  A screw mount type cutter capable of using on 4 corners.Ideal blade shape provides favorable wall accuracy.[Features]・ The insert shape optimized for corner cutting and the high-precision body achieve excellent machining quality.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	40 ～ 80	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	120	3 ～ 4	With handle	32	30	10	-

  From: 9,135,657 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Radius End Mill, RNM-S Shape, RNM-T Shape

  DIJET

  [Features]· For high precision machining

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 32	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	140 ～ 300	-	With handle	16 ～ 32	-	-	-

  From: 4,658,946 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BT Arbor for Modular End Mills (Head Replacement / Two-face Clamping Spindle Compatible)

  KYOCERA

  [Features]·Right-handed.·This product is capable of face milling.·The notched insert reduces and disperses cutting force during compression, and suppresses chattering, enabling high feed.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	-	-	-	-	-	-

  From: 10,491,841 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slot Mill Horizontal Installation Specification without Boss

  KYOCERA

  This slot mill has two keyways to allow use with 2 or more combined.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	6 ～ 10	-	-	-	-	-

  From: 43,603,877 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type

  OSG

  [Features]· OSG Phoenix Series· A straight shank type.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 80	-	-	40 ～ 50	3 ～ 9	Arbor	-	-	-	-

  From: 13,359,813 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  600-Q Arbor Mount For Blade Machining

  SANDVIK

  Round insert profiling milling cutter CoroMill™ for a wide range of applications600Round insert concept with positive axial cutting edge angle

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	general steel / Stainless Steel	Finishing	40	6	Arbor	-	-	5	-

  From: 15,732,135 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MEF Type Counterbore End Mill

  KYOCERA

  [Features]·This product allows the machining diameter to be set arbitrarily in 0.1 mm increments.·It can also handle narrow machining diameters that are not in the standard repertoire.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	103 ～ 176	1 ～ 4	-	10 ～ 32	23 ～ 96	-	-

  From: 3,786,458 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type

  OSG

  Indexable high-feed radius cutter, threaded type. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	13.2 ～ 46.4	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	140 ～ 300	2 ～ 5	With handle	25 ～ 42	40 ～ 180	-	Carbide Coat

  From: 5,718,638 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Mill (Negative Type)

  FUJIGEN

  Small diameter shank lineup allows use for small machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	30 ～ 40	general steel / Stainless Steel / Aluminum / Resin	Finishing	85	3	With handle	-	-	-	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)

  From: 5,983,619 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aero Mill (Positive Type)

  FUJIGEN

  [Features]· Ideal for use in low-rigidity machines such as tapping centers.· It supports a variety of workpieces with the lineup of negative and positive types.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	30 ～ 40	Stainless Steel / Aluminum / Resin	Finishing	85	3	With handle	-	-	-	Carbide Coat / No Carbide Coat

  From: 5,983,619 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Corner Tool

  FUJIGEN

  [Features]Various corner radius machining is possible by exchanging inserts.[Applications]For finishing flat surfaces and sides.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	30 ～ 80	general steel / Stainless Steel / Aluminum / Resin	Finishing	105 ～ 200	2 ～ 4	With handle	-	-	-	No Carbide Coat

  From: 5,152,282 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Power Mill, PWC Model PWCF-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·A multi-flute type Sumi power mill with a high efficiency semi-shoulder for slab milling, side milling, grooving, chamfering, etc., of cast iron.Maximum cutting depth (Ad) (mm): 15

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	80 ～ 200	Cast Iron	Rough and medium rough processing	-	9 ～ 24	Arbor	-	-	15	-

  From: 21,980,068 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WEX Model WEX-E

  SUMITOMO ELECTRIC HARDMETAL

  Low resistance insert with reinforced cutting edge, high-precision cutting edge, high durability body, a wide range of insert variations, and all part numbers equipped with air holes.[Features]・ Improved cutting edge strength and reduced cutting force by adopting a uniquely curved cutting edge. Achieves a high-quality machined surface that approaches the finishing area with a high-precision cutting edge. Smooth machining even with deep groove machining and low-rigidity machines.・ Improved cutting chip discharge with air and coolant.・ Special surface treatment improves corrosion and scratch resistance, and the increase in thread size improves clamping force and durability.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	25 ～ 63	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Rough and medium rough processing	120 ～ 220	2 ～ 6	With handle	20 ～ 42	25 ～ 80	14	-

  From: 5,340,149 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Wave Mill, WFX Model WFXF-E

  SUMITOMO ELECTRIC HARDMETAL

  Screw-fastened cutter enabling 4-corner use. With an ideal cutting edge shape, good wall surface accuracy can be gained.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 80	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Rough and medium rough processing	120	4 ～ 6	With handle	32	30	10	-

  From: 10,619,906 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2

  SUMITOMO ELECTRIC HARDMETAL

  High-speed, high-efficiency machining cutter capable of rough machining to finish machining of non-ferrous metals, including aluminum alloy.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 125	Aluminum	Rough and medium rough processing	-	4 ～ 7	Arbor	-	-	16 ～ 18	-

  From: 15,539,469 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCR type Long)

  BIG DAISHOWA SEIKI

  [Features]· Dual face contact integrated type provides even higher rigidity. Tip with enhanced rigidity, allowing tough and stable ramping

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 32	-	-	-	2	With handle	-	45 ～ 90	-	-

  From: 6,849,906 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill (FCR type Standard)

  BIG DAISHOWA SEIKI

  [Features]· Dual face contact integrated type provides even higher rigidity. Tip with enhanced rigidity, allowing tough and stable ramping

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	16 ～ 32	-	-	-	2 ～ 3	With handle	-	25 ～ 50	-	-

  From: 6,601,296 VND
  Days to Ship: Số ngày giao hàng: 12 Day(s)

  12 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Full Cut Mill FCR Type Straight Shank Type

  BIG DAISHOWA SEIKI

  [Features]· A highly versatile straight shank type. Combination with the MEGA Double Power Chuck enables comfortable work.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	17 ～ 33	-	-	120 ～ 180	2 ～ 3	With handle	16 ～ 32	25 ～ 48	-	-

  From: 6,088,274 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shell End Mill for MCS, MC G2

  ASAHI TOOLS

  Used by attaching an EM body (blade part) with a large diameter of φ50-100 onto the arbor

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 100	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin	-	60 ～ 110	6 ～ 10	Arbor	-	-	-	-

  From: 12,957,455 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFWN90 Type Face Mill Holder

  KYOCERA

  MFWN90 type face mill[Features]·Good sharpness with low resistance·Resistant to chatter·Thick wall design with excellent chipping resistance, neutral insert·Long life with new technology MEGACOAT NANO·A lineup of 5 chipbreakers for different machining applications

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	3 ～ 18	-	-	-	-	-

  From: 10,839,052 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFWN90 Type End Mill (With Coolant Holes at Tip Blade)

  KYOCERA

  The seizing prevention agent (MP-1) should be applied in a thin layer to the taper and threading of the clamp screw when fixing an insert.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 80	-	-	110	3 ～ 5	-	32	-	-	-

  From: 7,817,045 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECX Type End Mill

  KYOCERA

  [Features]·The low cutting force and high strength are suitable for compact machines.·The general-purpose JT chip breaker and low-cutting force JS chip breaker cover a wide range of cutting areas.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	8 ～ 33	-	-	80 ～ 160	1 ～ 8	-	10 ～ 32	-	-	-

  From: 4,130,914 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MECH Type Shell Mill (Without Coolant Holes)

  KYOCERA

  [Features]·This product is capable of shoulder milling, grooving, and face milling.S (mm): 6Wrench: DTM-6

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	-	-	-	-	8 ～ 30	-	-	-	-	-

  From: 18,018,726 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 365 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	69.7mm ～ 166.7mm	general steel / Quenched and tempered steel / high hardness steel / Cast Iron	Rough and medium rough processing	-	6 ～ 18	Arbor	22 ～ 50.8	-	6	Carbide Coat

  From: 19,078,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Cutter, Milling Cutter, Front Face Milling Cutter

  SANDVIK

  A versatile high-feed milling[Features]It is a tool with a concept of highly productive roughing to be used when a high cutting chip discharge rate is a top priorityThe 10° entering angle achieves face milling at a very high feed rate

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	52mm	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	Rough and medium rough processing	-	3	Arbor	-	-	2	Carbide Coat

  From: 21,477,646 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Long-Edge Cutter Arbor Mounting HSK

  SANDVIK

  Long edge cutter for titanium alloy machining[Features]Is the chip iLock?Reliable fixation thanks to technology

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 ～ 80	Titanium	Finishing	75 ～ 98	12/2 ～ 18/3	Arbor	22 ～ 32	55 ～ 68	46 ～ 61	No Carbide Coat

  From: 36,808,148 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18

  SANDVIK

  ● When in doubt, use this tool. Wide range of compatible applications and high performanceTool diameter: ø9.7 to 200 mm, Maximum cutting depth: Up to 71 mmCylindrical shank, arbor mounting, anti-vibration type, lightweight type with additive manufacturingSupports all types of machining processes and work materials with 17 long edge grades and 24 breakers● 20% lower power than conventional productsThe energy saving cutter contributes to power savingEasy to use even on compact machines● Supports face milling machine, shoulder milling, helical machining, and plunge machiningA versatile cutter that can do everything with just one unit, for which tailor-made (semi-standard product) is also available with short delivery times●GC4330, GC4340The steel-machining CVD grade is ideal for the versatile CoroMill 390The Inveio coating provides excellent abrasion resistance and long tool lifespan

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	40 ～ 84	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	Rough and medium rough processing	-	3 ～ 6	Centering Plug	-	38 ～ 100	15.4	Carbide Coat

  From: 14,117,848 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting

  SANDVIK

  Suitable not only for general milling but also for mold making, first recommendation for roughing

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	50 mm ～ 160 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	Rough and medium rough processing / Finishing	50 ～ 63	3 ～ 8	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: 15,998,818 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 390 Arbor Mounting RA390-J

  SANDVIK

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side	100 mm ～ 125 mm	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	-	63	5 ～ 8	Arbor	31.75 ～ 38.1	63	15.7	Carbide Coat

  From: 24,815,085 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	KYOCERA	KYOCERA	SANDVIK	KYOCERA	OSG	KYOCERA	FUJIGEN	SANDVIK	OSG	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KABUSYUUKOUGU	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	DIJET	KYOCERA	KYOCERA	OSG	SANDVIK	KYOCERA	OSG	FUJIGEN	FUJIGEN	FUJIGEN	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	BIG DAISHOWA SEIKI	ASAHI TOOLS	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	CoroMill 590 Cutter	MEC Type End Mill	MEC Type Face Mill	CoroMill 390 Cutter	MEW Type End Mill Holder	PRC BORE/PRC SS Phoenix Series Round Cutter Straight Shank Type	3D End Mill MEY Type	NEW Tiko Cutter	CoroMill 490 Cutter	PSF SS Phoenix Series 4 Corner Shoulder Milling Cutter Straight Shank Type	SEC-Multi Mill, CHE-R Type	MEW Type Face Mill	MECH Type End Mill (With Coolant Holes at Tip Blade)	Milling Cutter, EMP01 Series	PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type	Aluminum Small Diameter Cutter, SRF Type	Used for SEC-Wave Mill, WFX Model WFX-E	Mirror Radius End Mill, RNM-S Shape, RNM-T Shape	BT Arbor for Modular End Mills (Head Replacement / Two-face Clamping Spindle Compatible)	Slot Mill Horizontal Installation Specification without Boss	Phoenix Face Milling Cutter, 4-Corner Shoulder Mill Cutting Bore Type	600-Q Arbor Mount For Blade Machining	MEF Type Counterbore End Mill	PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type	Aero Mill (Negative Type)	Aero Mill (Positive Type)	Corner Tool	Used for SEC-Sumi Power Mill, PWC Model PWCF-R	Used for SEC-Wave Mill, WEX Model WEX-E	Used for SEC-Wave Mill, WFX Model WFXF-E	SEC-Wave Mill WAX3000 Type, for chip blade tip nose radius less than 3.2	Full Cut Mill (FCR type Long)	Full Cut Mill (FCR type Standard)	Full Cut Mill FCR Type Straight Shank Type	Shell End Mill for MCS, MC G2	MFWN90 Type Face Mill Holder	MFWN90 Type End Mill (With Coolant Holes at Tip Blade)	MECX Type End Mill	MECH Type Shell Mill (Without Coolant Holes)	CoroMill 365 Cutter	Side Cutter, Milling Cutter, Front Face Milling Cutter	Long-Edge Cutter Arbor Mounting HSK	End Mill And Shoulder Cutter Diameter 40 To 84 mm Coromant Capto R390-C-18	CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting	CoroMill 390 Arbor Mounting RA390-J
From	30,615,236 VND	4,130,914 VND	9,013,691 VND	26,023,926 VND	5,387,165 VND	6,032,799 VND	6,622,171 VND	10,626,988 VND	15,916,196 VND	7,941,398 VND	2,754,596 VND	9,818,077 VND	13,301,784 VND	1,338,435 VND	6,288,141 VND	13,779,419 VND	9,135,657 VND	4,658,946 VND	10,491,841 VND	43,603,877 VND	13,359,813 VND	15,732,135 VND	3,786,458 VND	5,718,638 VND	5,983,619 VND	5,983,619 VND	5,152,282 VND	21,980,068 VND	5,340,149 VND	10,619,906 VND	15,539,469 VND	6,849,906 VND	6,601,296 VND	6,088,274 VND	12,957,455 VND	10,839,052 VND	7,817,045 VND	4,130,914 VND	18,018,726 VND	19,078,384 VND	21,477,646 VND	36,808,148 VND	14,117,848 VND	15,998,818 VND	24,815,085 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	12 Day(s)	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)
Machining Application	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side	Side
blade diameter D(φ)	63mm ～ 160mm	10 ～ 50	-	80mm ～ 160mm	16 ～ 50	10 ～ 88	16 ～ 50	60 ～ 80	40mm ～ 250mm	25 ～ 40	16 ～ 80	-	25 ～ 50	12 ～ 25	16 ～ 63	30 ～ 63	40 ～ 80	16 ～ 32	-	-	50 ～ 80	-	-	13.2 ～ 46.4	30 ～ 40	30 ～ 40	30 ～ 80	80 ～ 200	25 ～ 63	50 ～ 80	50 ～ 125	16 ～ 32	16 ～ 32	17 ～ 33	50 ～ 100	-	50 ～ 80	8 ～ 33	-	69.7mm ～ 166.7mm	52mm	50 ～ 80	40 ～ 84	50 mm ～ 160 mm	100 mm ～ 125 mm
work material	Quenched and tempered steel / high hardness steel / Cast Iron / Aluminum / Copper	-	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	-	general steel / Stainless Steel / Aluminum / Resin	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	-	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	Aluminum	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron	-	-	-	general steel / Stainless Steel	-	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Stainless Steel / Aluminum / Resin	Stainless Steel / Aluminum / Resin	general steel / Stainless Steel / Aluminum / Resin	Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Titanium	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum	Aluminum	-	-	-	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Aluminum / Copper / Resin	-	-	-	-	general steel / Quenched and tempered steel / high hardness steel / Cast Iron	general steel / Quenched and tempered steel / Stainless Steel / Cast Iron / Titanium	Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Titanium	general steel / Quenched and tempered steel / high hardness steel / Stainless Steel / Cast Iron / Aluminum / Titanium / Copper / Graphite / Resin
Finish category	Finishing	-	-	Finishing	-	-	-	Finishing	Rough and medium rough processing / Finishing	-	Rough and medium rough processing	-	-	-	-	Rough and medium rough processing	Rough and medium rough processing	-	-	-	-	Finishing	-	-	Finishing	Finishing	Finishing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	-	-	-	-	-	-	-	-	Rough and medium rough processing	Rough and medium rough processing	Finishing	Rough and medium rough processing	Rough and medium rough processing / Finishing	-
Overall length (L)(mm)	40 ～ 63	80 ～ 250	-	50 ～ 63	100 ～ 170	40 ～ 250	120 ～ 250	120	-	120 ～ 140	100 ～ 160	-	120 ～ 185	85 ～ 115	90 ～ 190	-	120	140 ～ 300	-	-	40 ～ 50	40	103 ～ 176	140 ～ 300	85	85	105 ～ 200	-	120 ～ 220	120	-	-	-	120 ～ 180	60 ～ 110	-	110	80 ～ 160	-	-	-	75 ～ 98	-	50 ～ 63	63
Number of flutes(sheet)	5 ～ 10	1 ～ 5	4 ～ 11	7 ～ 12	2 ～ 5	2 ～ 10	4 ～ 7	3	4 ～ 16	3 ～ 5	1 ～ 4	4 ～ 6	8 ～ 42	1 ～ 3	2 ～ 6	3 ～ 6	3 ～ 4	-	-	6 ～ 10	3 ～ 9	6	1 ～ 4	2 ～ 5	3	3	2 ～ 4	9 ～ 24	2 ～ 6	4 ～ 6	4 ～ 7	2	2 ～ 3	2 ～ 3	6 ～ 10	3 ～ 18	3 ～ 5	1 ～ 8	8 ～ 30	6 ～ 18	3	12/2 ～ 18/3	3 ～ 6	3 ～ 8	5 ～ 8
Mounting Method	Arbor	-	-	Arbor	-	With handle / Arbor	-	With handle	Arbor	With handle	With handle	-	-	With handle	With handle	Arbor	With handle	With handle	-	-	Arbor	Arbor	-	With handle	With handle	With handle	With handle	Arbor	With handle	With handle	Arbor	With handle	With handle	With handle	Arbor	-	-	-	-	Arbor	Arbor	Arbor	Centering Plug	Arbor	Arbor
Shank diameter (d)(mm)	22 ～ 40	10 ～ 32	-	25.4 ～ 50.8	12 ～ 32	20 ～ 42	16 ～ 42	-	16 ～ 60	25 ～ 32	16 ～ 32	-	25 ～ 42	16 ～ 25	16 ～ 32	-	32	16 ～ 32	-	-	-	-	10 ～ 32	25 ～ 42	-	-	-	-	20 ～ 42	32	-	-	-	16 ～ 32	-	-	32	10 ～ 32	-	22 ～ 50.8	-	22 ～ 32	-	22 ～ 50.8	31.75 ～ 38.1
Underneck length (ℓ1)(mm)	-	-	-	-	-	50 ～ 120	-	-	-	35 ～ 50	25 ～ 45	-	-	25 ～ 35	25 ～ 90	-	30	-	-	-	-	-	23 ～ 96	40 ～ 180	-	-	-	-	25 ～ 80	30	-	45 ～ 90	25 ～ 50	25 ～ 48	-	-	-	-	-	-	-	55 ～ 68	38 ～ 100	-	63
Maximum Cutting Depth (Ad)(mm)	-	-	-	15.4 ～ 15.7	-	-	-	-	5.5 ～ 10	-	8 ～ 16	-	-	10.5 ～ 15.5	-	5	10	-	-	-	-	5	-	-	-	-	-	15	14	10	16 ～ 18	-	-	-	-	-	-	-	-	6	2	46 ～ 61	15.4	6 ～ 10	15.7
Compatible Tip Material	Carbide Coat	-	-	Carbide Coat	-	Carbide Coat / No Carbide Coat	-	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)	Carbide Coat	-	-	-	-	-	Carbide Coat / No Carbide Coat	-	-	-	-	-	-	-	-	Carbide Coat	Carbide Coat / No Carbide Coat / Cermet / Diamond (PCD)	Carbide Coat / No Carbide Coat	No Carbide Coat	-	-	-	-	-	-	-	-	-	-	-	-	Carbide Coat	Carbide Coat	No Carbide Coat	Carbide Coat	Carbide Coat	Carbide Coat

Loading...Tải…