Cutters / Indexable End Mills（work material：Cast Iron）

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 590 Cutter

  SANDVIK

  A light-cutting face milling cuter suitable for high-speed finishing[Features]The tool is designed with a serrated-tip interface for increased stability and reduced run-out

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	63mm ～ 160mm	Cast Iron	Finishing	40 ～ 63	5 ～ 10	Arbor	22 ～ 40	-	-	Carbide Coat

  From: 30,615,236 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGX-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	40 ～ 250	Cast Iron	Rough and medium rough processing	-	3 ～ 10	Arbor	-	-	6	-

  From: 7,227,280 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  CoroMill 245 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	62.5mm ～ 268.8mm	Cast Iron	Finishing	-	4 ～ 12	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: 17,328,952 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 490 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	40mm ～ 250mm	Cast Iron	Rough and medium rough processing / Finishing	-	4 ～ 16	Arbor	16 ～ 60	-	5.5 ～ 10	Carbide Coat

  From: 15,916,196 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  F3042B SL F3000 Series Positive Mill Neo Shell Type

  OSG

  Shell type that uses inserts with a 3-dimensional chip breaker with good cutting performance. Used in arbor for face mill.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	50	Cast Iron	-	40	5	Arbor	-	-	-	Carbide Coat / No Carbide Coat

  From: 22,531,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Ace Mill, FPG Model FPG-R/L

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·Right-handed or left-handed can be selected.·An ace mill for general purposes, slab milling, grooving, and chamfering of difficult-to-cut materials.Maximum cutting depth (Ad) (mm): 5.5

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	80 ～ 315	Cast Iron	Rough and medium rough processing	-	4 ～ 14	Arbor	-	-	5.5	-

  From: 11,903,304 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Side Cutter, Milling Cutter, Front Face Milling Cutter

  SANDVIK

  A versatile high-feed milling[Features]It is a tool with a concept of highly productive roughing to be used when a high cutting chip discharge rate is a top priorityThe 10° entering angle achieves face milling at a very high feed rate

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	52mm	Cast Iron	Rough and medium rough processing	-	3	Arbor	-	-	2	Carbide Coat

  From: 21,477,646 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 345 Face Milling, Arbor Mounting (FMA Type)

  SANDVIK

  [Features]8-cutting-edge specificationLow cutting resistanceMirror surface machiningHigh precisionHigh-speed machiningFace millingSupports all types of work materialClose pitchArbor mounting (FMA)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	174.08 mm	Cast Iron	Finishing	63	12	Arbor	50.8	-	6	Carbide Coat / Cermet

  From: 53,818,601 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 345 Face Milling, Diameter: 40-250 mm, Arbor Mounting 345-Q

  SANDVIK

  First choice for highly productive face millingHigh-rigidity cutter body and shim-protected chip seat ensure stable machining process, ideal choice when unmanned production is a priority

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	77.08 mm ～ 174.08 mm	Cast Iron	Finishing	45 ～ 63	7 ～ 16	Arbor	22 ～ 40	-	6	-

  From: 25,298,775 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shoulder Milling Cutter, Arbor Mounting Model

  MISUMI

  [Features]·Blade tip replaceable arbor mounting type holder·General purpose shoulder milling cutter using ISO insert·Outer diameter: ⌀80,⌀100,⌀125·Pitch: 5, 6, 8 flutes·Compatible tip: TP□N43 type

  • Volume Discount

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	125	Cast Iron	Rough and medium rough processing	-	8	Arbor	-	-	-	-

  From: 28,836,219 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Surface Processing Cutter DoPent TEN09

  TUNGALOY

  Screw clamp surface processing cutter[Features]· Cutting edge angle: 70°· Uses pentagonal double-sided inserts

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 160	Cast Iron	-	40 ～ 63	5 ～ 16	Arbor	-	40 ～ 63	6.4	Carbide Coat

  From: 13,084,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type

  OSG

  The employment of this high-precision insert achieves excellent bottom surface roughness. Due to the effect of the bottom notch, cutting chips are split into 2 during ramping and helical milling, which suppresses chip biting and entanglement, enabling smooth milling.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 63	Cast Iron	-	90 ～ 190	2 ～ 6	With handle	16 ～ 32	25 ～ 90	-	Carbide Coat / No Carbide Coat

  From: 6,288,141 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type

  OSG

  Indexable high-feed radius cutter, threaded type. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	13.2 ～ 46.4	Cast Iron	-	140 ～ 300	2 ～ 5	With handle	25 ～ 42	40 ～ 180	-	Carbide Coat

  From: 5,718,638 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Square, Bore Type

  OSG

  [Features]・ OSG Phoenix Series・ Suitable for milling machine.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 125	Cast Iron	-	45 ～ 63	4 ～ 8	Arbor	-	-	-	Carbide Coat

  From: 13,434,766 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Multifunctional, Standard Type WMM2000E

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Enables shoulder milling, grooving, and drilling with a single WMM type.・ Ideal for high efficiency ramping, helical drilling, and pocket machining.・ Use of a wave mill insert achieves both cutting performance and cutting edge strength.・ Reduced cutting force realizes the same cutting chip discharge amount as conventional products with a lower required power.・ One type of insert enables easy tool management.・ Ideal for...Readmore

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	20 ～ 30	Cast Iron	Rough and medium rough processing	130 ～ 150	3 ～ 5	With handle	20 ～ 25	35 ～ 50	17～35	-

  From: 5,573,262 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Ace Mill, CPG4000 Type

  SUMITOMO ELECTRIC HARDMETAL

  [Features]·Suitable for side milling and grooving of copper / cast iron / stainless steel.Maximum cutting depth (Ad) (mm): 18

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	80 ～ 200	Cast Iron	Rough and medium rough processing	-	5 ～ 12	Arbor	-	-	18	-

  From: 14,948,523 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Multi Mill, CHE-R Type

  SUMITOMO ELECTRIC HARDMETAL

  [Applications]Can be used for side milling, grooving, rough cutting, and medium-rough cutting. [Features]Can be used for machining a wide range of steel materials such as general steel, carbon steel, and stainless steel.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove	16 ～ 80	Cast Iron	Rough and medium rough processing	100 ～ 160	1 ～ 4	With handle	16 ～ 32	25 ～ 45	8 ～ 16	-

  From: 2,754,596 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Dual Mill, DGC Model DGC-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Adopts inserts that can be used in up to 16 corners on both sides, demonstrating excellent cost-effectiveness.・ A general-purpose cutter that achieves high-efficiency machining with high cutting edge strength, and adopts a low-burr chip breaker design, enabling a high level of machined surface quality.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	40(42.9) ～ 250 (252.9)	Cast Iron	Rough and medium rough processing	-	3 ～ 10	Arbor	-	-	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	-

  From: 8,499,466 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 365 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	69.7mm ～ 166.7mm	Cast Iron	Rough and medium rough processing	-	6 ～ 18	Arbor	22 ～ 50.8	-	6	Carbide Coat

  From: 19,078,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting

  SANDVIK

  Suitable not only for general milling but also for mold making, first recommendation for roughing

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 mm ～ 160 mm	Cast Iron	Rough and medium rough processing / Finishing	50 ～ 63	3 ～ 8	Arbor	22 ～ 50.8	-	6 ～ 10	Carbide Coat

  From: 15,998,818 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type

  OSG

  An octagonal and bore-type face mill. Economical through the use of double sides of octagonal inserts, totaling 16 corners.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	50 ～ 125	Cast Iron	-	40 ～ 63	5 ～ 12	Arbor	-	-	-	Carbide Coat

  From: 13,925,582 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter, XMR Series

  KABUSYUUKOUGU

  [XMR Series]A milling machine cutter with handle for high feed.Maximum depth of cut: 1.8 mm.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Plunging (Z feed) / Chamfer / Vertical	63 ～ 100	Cast Iron	-	50 ～ 63	5 ～ 6	With handle	27 ～ 32	-	1.8	-

  From: 4,847,997 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFH Type High Feed Cutter MFH Mini End Mill

  KYOCERA

  [Features]· Economical with double-sided 4 corners.· With a small diameter / multi-flute specification, machining can be realized with high efficiency/feed even when using small machining centers.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	16 ～ 32	Cast Iron	-	79 ～ 200	2 ～ 6	With handle	16 ～ 32	20 ～ 120	-	-

  From: 5,572,296 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type

  OSG

  Threaded type for shoulder milling cutter. Dedicated holders support various machining depths.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	16 ～ 40	Cast Iron	-	27 ～ 40	2 ～ 6	Centering Plug	-	-	-	Carbide Coat / No Carbide Coat

  From: 7,603,605 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Bore (rough machining long blade type), WBMR2000L Type

  SUMITOMO ELECTRIC HARDMETAL

  A sharp, low-resistance, wave blade type with a high rake angle. Strong anti-rotation mechanism suppresses tip movement while cutting.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	20 ～ 50	Cast Iron	Rough and medium rough processing	140 ～ 350	-	With handle	25 ～ 50.8	60 ～ 250	30～69	-

  From: 10,004,960 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Metal Slash Mill MSX06000E Type

  SUMITOMO ELECTRIC HARDMETAL

  Multifunctional cutter which dramatically improves efficiency with diverse tooling, enabling roughing with super-high feed.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	16 ～ 25	Cast Iron	Rough and medium rough processing	110 ～ 250	2 ～ 3	With handle	16 ～ 25	20 ～ 120	1	-

  From: 6,315,485 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-DNX Type DNX-R

  SUMITOMO ELECTRIC HARDMETAL

  A cutter that achieves high-efficiency machining with a maximum depth of cut of 8 mm, for high-efficiency flat surface machining of cast iron and cast steel.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	80 ～ 160	Cast Iron	Rough and medium rough processing	-	6 ～ 10	Arbor	-	-	8	-

  From: 13,213,654 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Dual Mill, DGC Model DGCM-R

  SUMITOMO ELECTRIC HARDMETAL

  Uses an insert which allows the use of 16 on both surfaces and shows excellent economic efficiency.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 (52.9) ～ 250 (252.9)	Cast Iron	Rough and medium rough processing	-	4 ～ 14	Arbor	-	-	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	-

  From: 10,619,906 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Used for SEC-Sumi Power Mill, PWC Model PWC-R

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ Vertically-mounted inserts with excellent cutting edge strength and optimized chip breaker achieve both outstanding cutting edge strength and cutting performance.·This product achieves stable machining with little chattering even with a large tool runout.·It can be used for a variety of work materials.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Chamfer	80 ～ 200	Cast Iron	Rough and medium rough processing	-	7 ～ 16	Arbor	-	-	15	-

  From: 18,289,019 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WFX-R For SEC-Wave Mill WFX Model

  SUMITOMO ELECTRIC HARDMETAL

  Screw locked cutter, enabling using 4 corners. Ideal blade shape provides favorable wall precision.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 250	Cast Iron	Rough and medium rough processing	-	3 ～ 12	Arbor	-	-	10	-

  From: 7,439,344 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Mill for WGX Type, WGXF-R(S)

  SUMITOMO ELECTRIC HARDMETAL

  Achieves low resistance with a dedicated chip breaker. For general cutting of steel and cast iron.[Features]・ The high rake chip breaker designed for the WGX type achieves low resistance.・ Achieves an excellent finished surface with improved blade runout accuracy and a unique sweeping blade shape.・ Addition of chamfer suppresses burrs and edge chips.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove / Chamfer	50 ～ 250	Cast Iron	Rough and medium rough processing	-	5 ～ 24	Arbor	-	-	6	-

  From: 9,983,912 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Wave Radius Mill for WRCX Type, WRCX-R (S)

  SUMITOMO ELECTRIC HARDMETAL

  This multi-functional cutter performs a variety of machining with high efficiency, such as mold engraving, slope milling, and helical tapping.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Groove	40 ～ 160	Cast Iron	Rough and medium rough processing	-	3 ～ 6	Arbor	-	-	6 ～ 10	-

  From: 9,453,752 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SHE Shell End Mill G2

  ASAHI TOOLS

  Used by attaching an EM body (blade part) with a large diameter of φ50-125 onto the arbor

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	50 ～ 100	Cast Iron	-	-	6 ～ 10	Arbor	-	-	-	-

  From: 9,977,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Bore C Body, BNM-S-C Shape

  DIJET

  It is a tool with excellent abrasion resistance.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	6 ～ 30	Cast Iron	-	60 ～ 300	-	With handle	6 ～ 32	-	-	-

  From: 7,599,233 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  CoroMill 390 Cutter

  SANDVIK

  Suitable for high-efficiency machining.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove	80mm ～ 160mm	Cast Iron	Finishing	50 ～ 63	7 ～ 12	Arbor	25.4 ～ 50.8	-	15.4 ～ 15.7	Carbide Coat

  From: 26,023,926 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Bore C Body, BNM-T-C Shape

  DIJET

  [Features]· Suppresses chattering and enables high-precision/high-speed machining and stable deep engraving· Uses carbide as the shank material, for tool rigidity comparable to that of solid ball end mills.· Twice or more the tool service life of steel shank types.· Also supports shrink-fit holders

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	6 ～ 20	Cast Iron	-	80 ～ 191	-	With handle	10 ～ 25	15 ～ 36	-	-

  From: 8,411,995 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type

  DIJET

  [Features]· One unit accomplishes all kinds of tasks incredibly well.· Multifunctional tool capable of three-dimensional cutting, including hole drilling and end milling, all performed with a single tool.· Uses a 3D tip for excellent cutting performance and chip disposal, allowing high efficiency machining to be performed.· Highly reliable cutter geometry and new JC5015 and JC5040 material combination makes it difficult to break, providing a long life

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Side / Groove / Inclined Cuts / Vertical	16 ～ 35	Cast Iron	-	180 ～ 350	-	With handle	16 ～ 32	40 ～ 90	-	-

  From: 8,579,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape

  DIJET

  [Specifications]· Mounting Method: Type with Handle· Work materials: General steel, tempered steel, high hardness steel, stainless steel, cast iron[Applications] Flat Surfaces / Side Surfaces / Grooves / Vertical

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side / Groove / Vertical	6 ～ 25	Cast Iron	-	80 ～ 250	-	With handle	6 ～ 25	30 ～ 170	-	-

  From: 6,992,594 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Weldon Shank R300-B

  SANDVIK

  Round tip cutter with light cutting action for roughing to semi-finishing[Features]Light cutting action allows smooth entry and exit for long tool setups

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	12 mm ～ 25 mm	Cast Iron	Finishing	109 ～ 141	2	With handle	16 ～ 32	-	1 ～ 5	-

  From: 7,807,614 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q

  SANDVIK

  [Features]Round-insert cutterFor everything from roughing through to medium cutting and high-feed machiningFor profilingExtra-close pitchArbor mounting (millimeters)

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane	40 ～ 200	Cast Iron	Rough and medium rough processing / Finishing	-	4 ～ 12	Arbor	16 ～ 60	-	4 ～ 10	-

  From: 17,156,661 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32

  SANDVIK

  High precision multi-purpose side cutter.[Features]·Diameter 40-315mm·Shipped preset to ±0.01 mm edge width tolerance·Radial run-out accuracy ±0.02 mm·wide pocket·Strong clamping by wedge·Serration method·Adjustment range 2-3mm·Unique spring-loaded mechanism for smooth adjustment and slip prevention

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Groove	-	Cast Iron	Finishing	-	6 ～ 10	Arbor	27 ～ 40	-	-	Carbide Coat

  From: 38,248,384 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 590 Cutter For Face Milling Machining Of Aluminum Alloy, Cast Iron, High-Hardness Steel Coromant Capto R590-C

  SANDVIK

  Light cutting face mill suitable for high-speed finishing[Features]Tool is designed with a serrated tip interface for increased stability and reduced run-out

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	40 mm ～ 80 mm	Cast Iron	Finishing	-	3 ～ 6	Centering Plug	22 ～ 44	-	-	Carbide Coat

  From: 21,919,286 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 390 Arbor Mounting RA390-J

  SANDVIK

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Side	100 mm ～ 125 mm	Cast Iron	-	63	5 ～ 8	Arbor	31.75 ～ 38.1	63	15.7	Carbide Coat

  From: 24,815,085 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill 419, Face Milling Cutter For Face Milling And Profiling 419-Q

  SANDVIK

  5 corner specification high feed milling cutter[Features]Suitable for roughing to semi-finishingOutstanding performance in all materials and can be optimized

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  Plane / Inclined Cuts	50.0 mm ～ 100.0 mm	Cast Iron	Finishing	45 ～ 50	4 ～ 7	Arbor	-	-	2	-

  From: 18,522,405 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MFH Type High Feed Cutter MFH Mini Head

  KYOCERA

  [Features]· Economical with double-sided 4 corners.· With a small diameter / multi-flute specification, machining can be realized with high efficiency/feed even when using small machining centers.

  Machining Application	blade diameter D(φ)	work material	Finish category	Overall length (L)(mm)	Number of flutes(sheet)	Mounting Method	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Maximum Cutting Depth (Ad)(mm)	Compatible Tip Material
  -	16 ～ 32	Cast Iron	-	43 ～ 63	2 ～ 6	Centering Plug	8.5 ～ 17	25 ～ 40	-	-

  From: 5,572,296 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Machining Application
blade diameter D(φ)
work material
Finish category
Overall length (L)(mm)
Number of flutes(sheet)
Mounting Method
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Maximum Cutting Depth (Ad)(mm)
Compatible Tip Material

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	SANDVIK	OSG	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	SANDVIK	SANDVIK	MISUMI	TUNGALOY	OSG	OSG	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	SANDVIK	OSG	KABUSYUUKOUGU	KYOCERA	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	ASAHI TOOLS	DIJET	SANDVIK	DIJET	DIJET	DIJET	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA
Product SeriesDòng sản phẩm	CoroMill 590 Cutter	SEC-Wave Mill for WGX Type, WGX-R(S)	CoroMill 245 Cutter	CoroMill 490 Cutter	F3042B SL F3000 Series Positive Mill Neo Shell Type	Used for SEC-Ace Mill, FPG Model FPG-R/L	Side Cutter, Milling Cutter, Front Face Milling Cutter	CoroMill 345 Face Milling, Arbor Mounting (FMA Type)	CoroMill 345 Face Milling, Diameter: 40-250 mm, Arbor Mounting 345-Q	Shoulder Milling Cutter, Arbor Mounting Model	Surface Processing Cutter DoPent TEN09	PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type	PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type	Phoenix Series Face Milling Cutter, Square, Bore Type	SEC-Wave Multifunctional, Standard Type WMM2000E	SEC-Ace Mill, CPG4000 Type	SEC-Multi Mill, CHE-R Type	Used for SEC-Sumi Dual Mill, DGC Model DGC-R	CoroMill 365 Cutter	CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting	Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type	Milling Cutter, XMR Series	MFH Type High Feed Cutter MFH Mini End Mill	PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type	SEC-Wave Bore (rough machining long blade type), WBMR2000L Type	SEC-Metal Slash Mill MSX06000E Type	Used for SEC-DNX Type DNX-R	Used for SEC-Sumi Dual Mill, DGC Model DGCM-R	Used for SEC-Sumi Power Mill, PWC Model PWC-R	WFX-R For SEC-Wave Mill WFX Model	SEC-Wave Mill for WGX Type, WGXF-R(S)	SEC-Wave Radius Mill for WRCX Type, WRCX-R (S)	SHE Shell End Mill G2	Mirror Bore C Body, BNM-S-C Shape	CoroMill 390 Cutter	Mirror Bore C Body, BNM-T-C Shape	Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type	Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape	CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Weldon Shank R300-B	CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q	CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32	CoroMill 590 Cutter For Face Milling Machining Of Aluminum Alloy, Cast Iron, High-Hardness Steel Coromant Capto R590-C	CoroMill 390 Arbor Mounting RA390-J	CoroMill 419, Face Milling Cutter For Face Milling And Profiling 419-Q	MFH Type High Feed Cutter MFH Mini Head
From	30,615,236 VND	7,227,280 VND	17,328,952 VND	15,916,196 VND	22,531,394 VND	11,903,304 VND	21,477,646 VND	53,818,601 VND	25,298,775 VND	28,836,219 VND	13,084,015 VND	6,288,141 VND	5,718,638 VND	13,434,766 VND	5,573,262 VND	14,948,523 VND	2,754,596 VND	8,499,466 VND	19,078,384 VND	15,998,818 VND	13,925,582 VND	4,847,997 VND	5,572,296 VND	7,603,605 VND	10,004,960 VND	6,315,485 VND	13,213,654 VND	10,619,906 VND	18,289,019 VND	7,439,344 VND	9,983,912 VND	9,453,752 VND	9,977,326 VND	7,599,233 VND	26,023,926 VND	8,411,995 VND	8,579,326 VND	6,992,594 VND	7,807,614 VND	17,156,661 VND	38,248,384 VND	21,919,286 VND	24,815,085 VND	18,522,405 VND	5,572,296 VND
Days to ShipSố ngày giao hàng	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	8 Day(s) or more	8 Day(s) or more
Machining Application	Plane / Side	Plane / Groove / Chamfer	Plane	Plane / Side / Groove	Side / Groove	Plane / Groove / Chamfer	Plane / Side / Groove	Plane	Plane	Side / Groove	Plane	Plane / Side / Groove	Plane / Side / Groove / Vertical	Plane	Plane / Side / Groove / Vertical	Side / Groove	Side / Groove	Plane / Groove / Chamfer	Plane / Side / Groove	Plane / Side / Groove	Plane	Plane / Side / Plunging (Z feed) / Chamfer / Vertical	-	Plane / Side / Groove	Groove	Plane / Groove	Plane	Plane / Groove / Chamfer	Plane / Side / Groove / Chamfer	Plane / Side / Groove	Plane / Groove / Chamfer	Plane / Groove	Plane / Side / Groove	Groove	Plane / Side / Groove	Groove	Side / Groove / Inclined Cuts / Vertical	Plane / Side / Groove / Vertical	Plane	Plane	Groove	-	Plane / Side	Plane / Inclined Cuts	-
blade diameter D(φ)	63mm ～ 160mm	40 ～ 250	62.5mm ～ 268.8mm	40mm ～ 250mm	50	80 ～ 315	52mm	174.08 mm	77.08 mm ～ 174.08 mm	125	50 ～ 160	16 ～ 63	13.2 ～ 46.4	50 ～ 125	20 ～ 30	80 ～ 200	16 ～ 80	40(42.9) ～ 250 (252.9)	69.7mm ～ 166.7mm	50 mm ～ 160 mm	50 ～ 125	63 ～ 100	16 ～ 32	16 ～ 40	20 ～ 50	16 ～ 25	80 ～ 160	50 (52.9) ～ 250 (252.9)	80 ～ 200	50 ～ 250	50 ～ 250	40 ～ 160	50 ～ 100	6 ～ 30	80mm ～ 160mm	6 ～ 20	16 ～ 35	6 ～ 25	12 mm ～ 25 mm	40 ～ 200	-	40 mm ～ 80 mm	100 mm ～ 125 mm	50.0 mm ～ 100.0 mm	16 ～ 32
work material	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron	Cast Iron
Finish category	Finishing	Rough and medium rough processing	Finishing	Rough and medium rough processing / Finishing	-	Rough and medium rough processing	Rough and medium rough processing	Finishing	Finishing	Rough and medium rough processing	-	-	-	-	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing / Finishing	-	-	-	-	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	Rough and medium rough processing	-	-	Finishing	-	-	-	Finishing	Rough and medium rough processing / Finishing	Finishing	Finishing	-	Finishing	-
Overall length (L)(mm)	40 ～ 63	-	-	-	40	-	-	63	45 ～ 63	-	40 ～ 63	90 ～ 190	140 ～ 300	45 ～ 63	130 ～ 150	-	100 ～ 160	-	-	50 ～ 63	40 ～ 63	50 ～ 63	79 ～ 200	27 ～ 40	140 ～ 350	110 ～ 250	-	-	-	-	-	-	-	60 ～ 300	50 ～ 63	80 ～ 191	180 ～ 350	80 ～ 250	109 ～ 141	-	-	-	63	45 ～ 50	43 ～ 63
Number of flutes(sheet)	5 ～ 10	3 ～ 10	4 ～ 12	4 ～ 16	5	4 ～ 14	3	12	7 ～ 16	8	5 ～ 16	2 ～ 6	2 ～ 5	4 ～ 8	3 ～ 5	5 ～ 12	1 ～ 4	3 ～ 10	6 ～ 18	3 ～ 8	5 ～ 12	5 ～ 6	2 ～ 6	2 ～ 6	-	2 ～ 3	6 ～ 10	4 ～ 14	7 ～ 16	3 ～ 12	5 ～ 24	3 ～ 6	6 ～ 10	-	7 ～ 12	-	-	-	2	4 ～ 12	6 ～ 10	3 ～ 6	5 ～ 8	4 ～ 7	2 ～ 6
Mounting Method	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	With handle	With handle	Arbor	With handle	Arbor	With handle	Arbor	Arbor	Arbor	Arbor	With handle	With handle	Centering Plug	With handle	With handle	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	Arbor	With handle	Arbor	With handle	With handle	With handle	With handle	Arbor	Arbor	Centering Plug	Arbor	Arbor	Centering Plug
Shank diameter (d)(mm)	22 ～ 40	-	22 ～ 50.8	16 ～ 60	-	-	-	50.8	22 ～ 40	-	-	16 ～ 32	25 ～ 42	-	20 ～ 25	-	16 ～ 32	-	22 ～ 50.8	22 ～ 50.8	-	27 ～ 32	16 ～ 32	-	25 ～ 50.8	16 ～ 25	-	-	-	-	-	-	-	6 ～ 32	25.4 ～ 50.8	10 ～ 25	16 ～ 32	6 ～ 25	16 ～ 32	16 ～ 60	27 ～ 40	22 ～ 44	31.75 ～ 38.1	-	8.5 ～ 17
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	40 ～ 63	25 ～ 90	40 ～ 180	-	35 ～ 50	-	25 ～ 45	-	-	-	-	-	20 ～ 120	-	60 ～ 250	20 ～ 120	-	-	-	-	-	-	-	-	-	15 ～ 36	40 ～ 90	30 ～ 170	-	-	-	-	63	-	25 ～ 40
Maximum Cutting Depth (Ad)(mm)	-	6	6 ～ 10	5.5 ～ 10	-	5.5	2	6	6	-	6.4	-	-	-	17～35	18	8 ～ 16	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	6	6 ～ 10	-	1.8	-	-	30～69	1	8	6 (SNMT/SNET Tip) / 3 (ONMT/ONET Tip)	15	10	6	6 ～ 10	-	-	15.4 ～ 15.7	-	-	-	1 ～ 5	4 ～ 10	-	-	15.7	2	-
Compatible Tip Material	Carbide Coat	-	Carbide Coat	Carbide Coat	Carbide Coat / No Carbide Coat	-	Carbide Coat	Carbide Coat / Cermet	-	-	Carbide Coat	Carbide Coat / No Carbide Coat	Carbide Coat	Carbide Coat	-	-	-	-	Carbide Coat	Carbide Coat	Carbide Coat	-	-	Carbide Coat / No Carbide Coat	-	-	-	-	-	-	-	-	-	-	Carbide Coat	-	-	-	-	-	Carbide Coat	Carbide Coat	Carbide Coat	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	SANDVIK	OSG	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	SANDVIK	SANDVIK	MISUMI	TUNGALOY	OSG	OSG	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SANDVIK	SANDVIK	OSG	KABUSYUUKOUGU	KYOCERA	OSG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	ASAHI TOOLS	DIJET	SANDVIK	DIJET	DIJET	DIJET	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KYOCERA
Product SeriesDòng sản phẩm	CoroMill 590 Cutter	SEC-Wave Mill for WGX Type, WGX-R(S)	CoroMill 245 Cutter	CoroMill 490 Cutter	F3042B SL F3000 Series Positive Mill Neo Shell Type	Used for SEC-Ace Mill, FPG Model FPG-R/L	Side Cutter, Milling Cutter, Front Face Milling Cutter	CoroMill 345 Face Milling, Arbor Mounting (FMA Type)	CoroMill 345 Face Milling, Diameter: 40-250 mm, Arbor Mounting 345-Q	Shoulder Milling Cutter, Arbor Mounting Model	Surface Processing Cutter DoPent TEN09	PSE SS Phoenix Series Shoulder Milling Cutter Straight Shank Type	PHC SS Phoenix Series High Feed Radius Cutter Straight Shank Type	Phoenix Series Face Milling Cutter, Square, Bore Type	SEC-Wave Multifunctional, Standard Type WMM2000E	SEC-Ace Mill, CPG4000 Type	SEC-Multi Mill, CHE-R Type	Used for SEC-Sumi Dual Mill, DGC Model DGC-R	CoroMill 365 Cutter	CoroMill 200 Round-Insert Face Milling & End Milling With Arbor Mounting	Phoenix Series Face Milling Cutter, Octagon Type, Bore Type, Screw Lock Type	Milling Cutter, XMR Series	MFH Type High Feed Cutter MFH Mini End Mill	PSE Phoenix Series Shoulder Milling Cutter PSE Screw-In Type	SEC-Wave Bore (rough machining long blade type), WBMR2000L Type	SEC-Metal Slash Mill MSX06000E Type	Used for SEC-DNX Type DNX-R	Used for SEC-Sumi Dual Mill, DGC Model DGCM-R	Used for SEC-Sumi Power Mill, PWC Model PWC-R	WFX-R For SEC-Wave Mill WFX Model	SEC-Wave Mill for WGX Type, WGXF-R(S)	SEC-Wave Radius Mill for WRCX Type, WRCX-R (S)	SHE Shell End Mill G2	Mirror Bore C Body, BNM-S-C Shape	CoroMill 390 Cutter	Mirror Bore C Body, BNM-T-C Shape	Super End Chipper SEC Type - Long, Extra Long, MT Shank, Weldon Shank Type	Mirror Radius End Mill (Ultra Hard Shank), RNM-S-C Shape	CoroMill 300 Round-Insert Toroid End Mill, Toroid Cutter, Weldon Shank R300-B	CoroMill 300 Round-Insert Face Milling Cutter (Positive Design), Arbor Mounting R300-Q	CoroMill 331 Full Side Cutter, Machining Width: 12.0-26.5 mm 331.32	CoroMill 590 Cutter For Face Milling Machining Of Aluminum Alloy, Cast Iron, High-Hardness Steel Coromant Capto R590-C	CoroMill 390 Arbor Mounting RA390-J	CoroMill 419, Face Milling Cutter For Face Milling And Profiling 419-Q	MFH Type High Feed Cutter MFH Mini Head

Loading...Tải…