Inserts (for Milling)（work material：Stainless Steel Page5）

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Milling Tip PR1525 PVD Coating

  KYOCERA

  [Features]· PR1525: Uses "MEGACOAT NANO", a special nano-laminated coating with superior wear resistance and heat resistance.· Realizes a stable service life when milling steel and stainless steel.[Applications]· For Milling· PR1525: For steel and stainless steel milling

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  -	Stainless Steel	-	-	-

  From: 370,400 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Milling Tip PR1535 PVD Coating

  KYOCERA

  [Features]· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.· Compatible with milling of Ti alloy and precipitation hardened stainless steel.[Applications]· For Milling· PR1535: For milling of Ti alloy and precipitation hardened stainless steel

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  -	Stainless Steel	-	-	-

  From: 243,953 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Milling Tip CA6535 CVD Coating

  KYOCERA

  [Features]· CA6535: CVD grade for milling with improved stability thanks to the use of thin film.· Exhibits high heat resistance and abrasion resistance.· Applicable to Ni-based heat-resistant alloy and martensitic stainless steel milling.[Applications]· For Milling· CA6535: Milling of Ni-base heat-resistant alloy and martensitic stainless steel

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  -	Stainless Steel	-	-	-

  From: 472,393 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera Milling Tip PR1535 PVD Coating

  KYOCERA

  [Features]· PR1535: Uses "MEGACOAT NANO", a special nano-laminated coating, to improve wear resistance and stability.· Compatible with milling of Ti alloy and precipitation hardened stainless steel.[Applications]· For Milling· PR1535: For milling of Ti alloy and precipitation hardened stainless steel

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  -	Stainless Steel	-	-	-

  From: 472,393 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Milling Cutter, Tip for FMA01 Series

  KABUSYUUKOUGU

  ·Insert for FMA01 series.Materials: YBG102, usable work materials: P type, M type

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Stainless Steel	E(20°）	4	-

  From: 214,113 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter, Tip for FMA03 Series

  KABUSYUUKOUGU

  [Features]· Tip for FMA03 Series.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Stainless Steel	E(20°）	4	-

  From: 202,161 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Milling Cutter, Tip for EMP01 Series

  KABUSYUUKOUGU

  [Features]· Tip for EMP01 Series.· Cutting edge angle is 88°.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Stainless Steel	P (11°)	2	-

  From: 190,208 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter, Tip for XMR Series

  KABUSYUUKOUGU

  ·Insert for XMR series; material: YBM351; application: milling machining; shape: square; surface treatment: CVD coating; usable work material: M type

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Stainless Steel	D(15°）	4	-

  From: 222,081 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter, Tip for BMR03 Series

  KABUSYUUKOUGU

  Insert for BMR03 series milling machine cutter.Applications: milling machining; material: YBG302; surface treatment: PVD coating; usable work material: P type, M type

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Stainless Steel	Other	2	-

  From: 273,876 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Cutter, Tip for BMR04 Series

  KABUSYUUKOUGU

  Insert for BMR04 series milling machine cutter.Materials: YBG252; application: milling machining; surface treatment: PVD coating; usable work material: P type, M type

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Stainless Steel	Other	4	-

  From: 253,955 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Helido (45° Lead) Double-Sided 16-Cutting Edge Tip

  ISCAR

  [Features]· The dove-tail structure tip is tough and capable of high precision positioning. Because both sides are used, double the number of cutting edges (2 times to 4 times) can be used in comparison to conventional cutters in which typically only 4 cutting edges could be used. [Applications]· Plane cutting and face cutting

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  O (Regular octagon)	Stainless Steel	N(0°）	Other	-

  From: 403,931 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling holder

  KYOCERA

  【特長】・MFPN型：5角形(10コーナ)チップの採用でコーナ当たりコスト低減。ヘリカル切刃構造とダブルエッジ構造で低抵抗と耐欠損性を向上します。【用途】・フェースミル・平面削り・面削り・高能率加工【商品仕様】・適合チップ：PNMU1205・コーナ角：45°・スクリュークランプ方式・コースピッチ・インロー部：インチ仕様・左勝手・JANコード：4960664756889・トラスココード：820-5684

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  -	Stainless Steel	-	-	-

  From: 28,567,849 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera milling tip PNEU

  KYOCERA

  【特長】・PR1525：耐摩耗、耐熱性に優れた特殊ナノ積層コーティング「MEGACOAT NANO」を採用。鋼およびステンレス鋼のミーリング加工の安定長寿命を実現。【用途】・ミーリング加工用・PR1525：鋼、ステンレス鋼のミーリング加工用【商品仕様】・幅(mm)：61・奥行(mm)：130・高さ(mm)：14.5・適合ホルダ：MFPN45型・被膜構成：MEGACOAT NANO・呈色：赤緑色・左勝手・GLブレーカ：面粗度重視・E級・JANコード：4960664717521・トラスココード：824-9763【材質/仕上】・PVDコーティング

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  P (Regular pentagon) / Other	Stainless Steel	N(0°）	2	-

  From: 425,307 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling tip circular RPGT series

  KYOCERA

  【特長】・PR1525：耐摩耗、耐熱性に優れた特殊ナノ積層コーティング「MEGACOAT NANO」の採用で、鋼、ステンレス鋼のミーリング加工の安定長寿命を実現【用途】・ミーリング加工用・PR1525：鋼、ステンレス鋼のミーリング加工用【商品仕様】・適合ホルダ：MRX型・被膜構成：MEGACOAT NANO・呈色：黒赤色・SMブレーカ：ステンレス鋼・低抵抗型・G級・JANコード：4960664706341・トラスココード：551-3561【材質/仕上】・PVDコーティング

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  -	Stainless Steel	-	-	-

  From: 361,767 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Milling Insert (With Hole) LPGT

  KYOCERA

  [Features]The special nano-laminated coating improves abrasion resistance and stability and is compatible with roughing and semi-finishing of stainless steel and heat resistant alloys, and for the parting-off of stainless steel.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  L (Rectangular)	Stainless Steel	P (11°)	-	-

  From: 187,851 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For SEC-Wave Radius Mill RDET2006

  SUMITOMO ELECTRIC HARDMETAL

  [Features]The body design, which combines sharpness and rigidity, ensures stable machining even in equipment with low clamping rigidity.[Applications]For low cutting force and low vibration machining.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  R (Circular)	Stainless Steel	D(15°）	-	-

  From: 545,881 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For SEC-Wave Radius Mill RDET0803

  SUMITOMO ELECTRIC HARDMETAL

  [Features]The body design, which combines sharpness and rigidity, ensures stable machining even in equipment with low clamping rigidity.[Applications]For low cutting force and low vibration machining.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  R (Circular)	Stainless Steel	D(15°）	-	-

  From: 246,924 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Throw-Away Insert For End Mill CZH-140/141

  NGK SPARK PLUG

  Insert for indexable end mills.Shape (initial letter of part number): othersSpecifications: center bladeCompatible holder: REZ typeWiper yes/no: with wiper

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Stainless Steel	-	-	-

  From: 629,268 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】

  WIDIA

  Chamfer mill, M25 Series, Insert, SDMW [10 Pcs. Included][Specifications]Shape (initial letter of part number): S (square)Relief angle: D (15°)Work material: cast Iron / non-ferrous metals / heat resistant alloys, titanium alloysNumber of available corners: 4Cutting edge length (mm): 9.53Thickness (mm): 3.18Grade: THM

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  S (Square)	Stainless Steel	D(15°）	4	-

  From: 1,927,385 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For End Mills For Automatic Lathes MT-CP

  THE CUT

  [Dedicated Insert]*5 inserts are contained in 1 case.* The cutting conditions are for general guidance.They are subject to change to the situation of the machine used, the rigidity of the chuck, cutting fluid, etc.·Part number: MT-CP040102R-RH-CEM1Supported work material: steel other than non-ferrous metal·Part number: MT-CP040102R-SE-MK10Supported work material: cast iron, non-ferrous metal·Part number: MT-CP040102R-RH-VP20Su...Readmore

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Stainless Steel	-	-	-

  From: 552,860 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For GF2T30○○M-○○ GALLEA Modular Type

  MITSUBISHI HITACHI TOOL

  [Features] · Economic 2-corner specification · The pitch can be increased, allowing you to reduce the machining speed regardless of feed speed.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Stainless Steel	-	-	-

  From: 374,212 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Insert For RD16B Alpha Radius Mill

  MITSUBISHI HITACHI TOOL

  [Features] · An insert for the RD16B Alpha Radius Mill · A 16-corner insert only made possible by the use of the latest press molding technology.

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  R (Circular)	Stainless Steel	-	-	-

  From: 374,212 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Counterbore Cutter PZAG Insert

  OSG

  Square type insert with 4-corner specifications. The muscle breaker achieves outstanding cutting chip separation capability.

  CAD ：

  2D / 3D

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  Other	Stainless Steel	P (11°)	-	-

  From: 371,846 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Phoenix Series, Insert for 6-Corner Shoulder Milling Cutter, PSTW

  OSG

  [Features]· Due to a positive rake angle with low resistance, as well as a thickness that increases rigidity, it is resistant to chatter vibration and supports machining with long protrusions· Economical specifications with 3 corners on front and back (6 corners in total on both sides)· Insert variation according to processing application

  CAD ：

  2D / 3D

  Shape (initial letter of model number)	work material	Clearance angle	Available corners	Data for CAM / Tool Management Software
  T (Equilateral Triangle Type)	Stainless Steel	N(0°）	-	-

  From: 432,785 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
CADCAD
From
Days to ShipSố ngày giao hàng
Shape (initial letter of model number)
work material
Clearance angle
Available corners
Data for CAM / Tool Management Software

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KABUSYUUKOUGU	KABUSYUUKOUGU	KABUSYUUKOUGU	KABUSYUUKOUGU	KABUSYUUKOUGU	KABUSYUUKOUGU	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	NGK SPARK PLUG	WIDIA	THE CUT	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	OSG	OSG
Product SeriesDòng sản phẩm	Kyocera Milling Tip PR1525 PVD Coating	Kyocera Milling Tip PR1535 PVD Coating	Kyocera Milling Tip CA6535 CVD Coating	Kyocera Milling Tip PR1535 PVD Coating	Milling Cutter, Tip for FMA01 Series	Milling Cutter, Tip for FMA03 Series	Milling Cutter, Tip for EMP01 Series	Milling Cutter, Tip for XMR Series	Milling Cutter, Tip for BMR03 Series	Milling Cutter, Tip for BMR04 Series	Helido (45° Lead) Double-Sided 16-Cutting Edge Tip	Milling holder	Kyocera milling tip PNEU	Milling tip circular RPGT series	Milling Insert (With Hole) LPGT	Insert For SEC-Wave Radius Mill RDET2006	Insert For SEC-Wave Radius Mill RDET0803	Throw-Away Insert For End Mill CZH-140/141	Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】	Insert For End Mills For Automatic Lathes MT-CP	Insert For GF2T30○○M-○○ GALLEA Modular Type	Insert For RD16B Alpha Radius Mill	Counterbore Cutter PZAG Insert	Phoenix Series, Insert for 6-Corner Shoulder Milling Cutter, PSTW
CADCAD																							2D / 3D	2D / 3D
From	370,400 VND	243,953 VND	472,393 VND	472,393 VND	214,113 VND	202,161 VND	190,208 VND	222,081 VND	273,876 VND	253,955 VND	403,931 VND	28,567,849 VND	425,307 VND	361,767 VND	187,851 VND	545,881 VND	246,924 VND	629,268 VND	1,927,385 VND	552,860 VND	374,212 VND	374,212 VND	371,846 VND	432,785 VND
Days to ShipSố ngày giao hàng	9 Day(s) or more	8 Day(s) or more	10 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	8 Day(s) or more	9 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more
Shape (initial letter of model number)	-	-	-	-	S (Square)	S (Square)	Other	S (Square)	Other	Other	O (Regular octagon)	-	P (Regular pentagon) / Other	-	L (Rectangular)	R (Circular)	R (Circular)	Other	S (Square)	Other	Other	R (Circular)	Other	T (Equilateral Triangle Type)
work material	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Clearance angle	-	-	-	-	E(20°）	E(20°）	P (11°)	D(15°）	Other	Other	N(0°）	-	N(0°）	-	P (11°)	D(15°）	D(15°）	-	D(15°）	-	-	-	P (11°)	N(0°）
Available corners	-	-	-	-	4	4	2	4	2	4	Other	-	2	-	-	-	-	-	4	-	-	-	-	-
Data for CAM / Tool Management Software	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KABUSYUUKOUGU	KABUSYUUKOUGU	KABUSYUUKOUGU	KABUSYUUKOUGU	KABUSYUUKOUGU	KABUSYUUKOUGU	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	NGK SPARK PLUG	WIDIA	THE CUT	MITSUBISHI HITACHI TOOL	MITSUBISHI HITACHI TOOL	OSG	OSG
Product SeriesDòng sản phẩm	Kyocera Milling Tip PR1525 PVD Coating	Kyocera Milling Tip PR1535 PVD Coating	Kyocera Milling Tip CA6535 CVD Coating	Kyocera Milling Tip PR1535 PVD Coating	Milling Cutter, Tip for FMA01 Series	Milling Cutter, Tip for FMA03 Series	Milling Cutter, Tip for EMP01 Series	Milling Cutter, Tip for XMR Series	Milling Cutter, Tip for BMR03 Series	Milling Cutter, Tip for BMR04 Series	Helido (45° Lead) Double-Sided 16-Cutting Edge Tip	Milling holder	Kyocera milling tip PNEU	Milling tip circular RPGT series	Milling Insert (With Hole) LPGT	Insert For SEC-Wave Radius Mill RDET2006	Insert For SEC-Wave Radius Mill RDET0803	Throw-Away Insert For End Mill CZH-140/141	Chamfering Mill M25 Series Insert SDMW【10 Pieces Per Package】	Insert For End Mills For Automatic Lathes MT-CP	Insert For GF2T30○○M-○○ GALLEA Modular Type	Insert For RD16B Alpha Radius Mill	Counterbore Cutter PZAG Insert	Phoenix Series, Insert for 6-Corner Shoulder Milling Cutter, PSTW

Loading...Tải…