Holding Tools for O.D. Tuning（Application：End Face）

• You can add up to 6 items per a category to the compare list. Compare

  

  DCLN Type (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,008,113 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L

  SANDVIK

  [Features]The number-one recommended turning tool for rough outer-diameter cutting and finishing. For use with negative inserts, and, as it features a center hole, it allows for speedy and accurate indexing. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Left-hand	End Face	Lever lock	40	40

  From: 6,515,708 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PVPN Type (External Diameter, Copying/Undercutting)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand / Left-hand	End Face	Pin Lock	20 ～ 25	20 ～ 25

  From: 2,293,946 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVPB Type (outer diameter, end surface, profile, relief machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 5° (B); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand / Left-hand	End Face	Screw-on	10 ～ 25	10 ～ 25

  From: 1,865,295 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit, PTFN Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-70 type tool bit PTFN type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PCLN Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSSN Type (External Diameter, End Face, Chamfering)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and chamfering; compatible insert shape: S (square); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Lever lock	16 ～ 25	16 ～ 25

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WTKN-N Type (outer diameter, end surface, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: T (triangle); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Wedge Lock	-	-

  From: 2,255,783 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DWLN Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: W (hexagonal); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,008,113 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCLC-FF Type (without Offset) (External Diameter / End Face Machining)

  KYOCERA

  [Features]·This is SCLC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and flange

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	End Face	Screw-on	8 ～ 18	8 ～ 16

  From: 1,701,821 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SCLC Type (External Diameter/End-Face Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Left-hand	End Face	Screw-on	11 ～ 23	11 ～ 23

  From: 4,825,924 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP

  SANDVIK

  Sandvik External holder CoroTurn HP Coromant Capto Cutting head for internal turning C-PCLNR/L-HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	End Face	Lever lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. For general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DDJN Type (Outer Diameter Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 1,969,949 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PDHN Type (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Lever lock	-	-

  From: 1,867,852 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PSKN Type (End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: flange; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Lever lock	-	-

  From: 1,867,852 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PTFN Type (End Face Machining)

  KYOCERA

  [Specifications]·Machining applications: flange; compatible insert shape: T (triangle); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Lever lock	12 ～ 25	12 ～ 25

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DVPN Type (External Diameter, Profiling/Undercutting)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 2,378,339 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: R (round); compatible insert relief angle: Positive 7 (C), negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative / Pozidriv	Right-hand / Left-hand	End Face	Lever lock	-	-

  From: 1,867,852 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	End Face	Back Surface Clamp	-	-

  From: 1,990,408 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: V (35° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Pozidriv	Right-hand	End Face	Screw-on	-	-

  From: 1,826,934 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max S Shank Tool Bit For Turning, 177.9

  SANDVIK

  T-Max S Turning Shank Bit for a Productive, Efficient and Reliable Machining Solution

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	No-hand	End Face	-	20 ～ 25	9 ～ 13

  From: 4,102,268 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	No-hand	End Face	-	-	-

  From: 16,745,498 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Pin Lock	-	-

  From: 14,107,208 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-GD Type Profiling Bit GDE Type

  SUMITOMO ELECTRIC HARDMETAL

  Available with dogbone inserts. For profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	Pozidriv	Right-hand / Left-hand	End Face	-	25	25

  From: 9,502,342 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for SEC-Solid Sumi Boron FCLN

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: outer diameter and flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	End Face	Clamp-on	25	25

  From: 3,777,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit for SEC-Solid Sumi Boron FN21

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: T (triangle); compatible insert relief angle: Negative 0° (N)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	-	Right-hand / Left-hand	End Face	Clamp-on	25	25

  From: 3,777,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, ETXN Type

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type, for general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, MTXN Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp on and pin lock type, for general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Double Clamp	20 ～ 25	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, PCLN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Lever lock	40	40

  From: 3,310,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-REX Tool Bit DTR55Q

  SUMITOMO ELECTRIC HARDMETAL

  [Features]・ The machining cost is significantly reduced due to the number of cutting edges which is 1.5 times as many as DNMG inserts.・ Strongly clamps the insert with corrugated fitting and double clamp on lock.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  Other	-	Right-hand / Left-hand	End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 2,483,584 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Compatible insert shape: C (80° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	End Face	-	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Turning Tool Bit, CSKP Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp-on. For flanges.[Features]·Stable clamping improves wear resistance of inserts·High index precision improves machining precision·It is possible to replace the insert from the underside of the tool bit·It is ideal for high-efficiency, intermittent, high-hardness material machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Pozidriv	Right-hand / Left-hand	End Face	Clamp-on	25	25

  From: 3,777,015 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Turning Tool Bit, CTFP Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp-on. For flanges.[Features]·Stable clamping improves wear resistance of inserts·High index precision improves machining precision·It is possible to replace the insert from the underside of the tool bit·It is ideal for high-efficiency, intermittent, high-hardness material machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Pozidriv	Right-hand	End Face	Clamp-on	19 ～ 25	19 ～ 25

  From: 3,310,593 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D type tool DCLN type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Left-hand	End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Tool Bit, DTFN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp. For flanges.[Features]·Stable clamping improves wear resistance of inserts·High index precision improves machining precision·It is possible to replace the insert from the underside of the tool bit·It is ideal for high-efficiency, intermittent, high-hardness material machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand / Left-hand	End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Bit, DWLN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. For General / End Face Cutting

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	End Face	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Bit, ESKN Type

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type. For End Face Cutting

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Tool Bit ESSN Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  Pin lock type. General / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Left-hand	End Face	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-30 Type Bit ESSN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flanges and chamfering; compatible insert shape: S (square); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand	End Face	Pin Lock	12 ～ 25	12 ～ 25

  From: 1,268,644 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-M Type Bit, MWLN Type

  SUMITOMO ELECTRIC HARDMETAL

  Clamp-on + pin lock type. General / End Face Cutting

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	End Face	Double Clamp	20 ～ 32	20 ～ 25

  From: 2,589,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit, PCFN Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-70 type tool bit PCFN type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Lever lock	20 ～ 25	20 ～ 25

  From: 1,851,721 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  Lever lock type. For general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Left-hand	End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Lever lock type. For general / end face cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit, PSKN Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-70 type tool bit PSKN type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Lever lock	16 ～ 32	16 ～ 32

  From: 1,771,263 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	SANDVIK	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	DCLN Type (Outer Diameter Machining / End Machining)	Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L	PVPN Type (External Diameter, Copying/Undercutting)	SVPB Type (outer diameter, end surface, profile, relief machining)	SEC-70 Type Tool Bit, PTFN Type	PCLN Type (External Diameter/End-Face Machining)	PSSN Type (External Diameter, End Face, Chamfering)	WTKN-N Type (outer diameter, end surface, profile machining)	DWLN Type (External Diameter/End-Face Machining)	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	S...SCLC Type (External Diameter/End-Face Machining)	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP	SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)	DDJN Type (Outer Diameter Machining / Profiling)	PDHN Type (External Diameter, End Face, Profiling)	PSKN Type (End Face Machining)	PTFN Type (End Face Machining)	DVPN Type (External Diameter, Profiling/Undercutting)	PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)	ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)	SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)	T-Max S Shank Tool Bit For Turning, 177.9	Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP	Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP	SEC-GD Type Profiling Bit GDE Type	Tool Bit for SEC-Solid Sumi Boron FCLN	Tool Bit for SEC-Solid Sumi Boron FN21	SEC-Outer Diameter Bit, ETXN Type	SEC-Outer Diameter Bit, MTXN Type	SEC-Outer Diameter Bit, PCLN Type	T-REX Tool Bit DTR55Q	SEC-Mini Bit, SC Type	SEC-Turning Tool Bit, CSKP Type	SEC-Turning Tool Bit, CTFP Type	SEC-D type tool DCLN type	SEC-D Type Tool Bit, DTFN Type	SEC-D Type Bit, DWLN Type	SEC-30 Type Bit, ESKN Type	SEC-30 Type Tool Bit ESSN Type (Cutting Direction: Left)	SEC-30 Type Bit ESSN Type	SEC-M Type Bit, MWLN Type	SEC-70 Type Tool Bit, PCFN Type	SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Left)	SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Right)	SEC-70 Type Tool Bit, PSKN Type
From	2,008,113 VND	6,515,708 VND	2,293,946 VND	1,865,295 VND	1,771,263 VND	1,803,918 VND	1,803,918 VND	2,255,783 VND	2,008,113 VND	1,701,821 VND	4,825,924 VND	12,668,141 VND	1,944,769 VND	1,969,949 VND	1,867,852 VND	1,867,852 VND	1,803,918 VND	2,378,339 VND	1,867,852 VND	1,990,408 VND	1,826,934 VND	4,102,268 VND	16,745,498 VND	14,107,208 VND	9,502,342 VND	3,777,015 VND	3,777,015 VND	1,268,644 VND	2,589,616 VND	3,310,593 VND	2,483,584 VND	1,739,394 VND	3,777,015 VND	3,310,593 VND	1,944,769 VND	1,944,769 VND	1,944,769 VND	1,268,644 VND	1,268,644 VND	1,268,644 VND	2,589,616 VND	1,851,721 VND	1,771,263 VND	1,771,263 VND	1,771,263 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	7 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	9 Day(s) or more	8 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Applicable Tip Shape	C (80° Diamond-Shape)	S (Rectangular)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	T (Triangle)	C (80° Diamond-Shape)	S (Rectangular)	T (Triangle)	W (Hexagonal Type)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	T (Triangle)	V (35° Diamond-Shaped)	R (Circular)	C (80° Diamond-Shape)	V (35° Diamond-Shaped)	T (Triangle)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	Other	C (80° Diamond-Shape)	T (Triangle)	T (Triangle)	T (Triangle)	C (80° Diamond-Shape)	Other	C (80° Diamond-Shape)	S (Rectangular)	T (Triangle)	C (80° Diamond-Shape)	T (Triangle)	W (Hexagonal Type)	S (Rectangular)	S (Rectangular)	S (Rectangular)	W (Hexagonal Type)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	S (Rectangular)
Applicable Chip Clearance Angle	Negative	Negative	Negative	Pozidriv	Negative	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	-	Negative	Negative	Negative	Negative	Negative	Negative	Negative / Pozidriv	Pozidriv	Pozidriv	-	-	Negative	Pozidriv	-	-	Negative	Negative	Negative	-	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative
Selfishly	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand	Right-hand / Left-hand
Application	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face	End Face
Clamp Shape	Cable clamp	Lever lock	Pin Lock	Screw-on	Lever lock	Lever lock	Lever lock	Wedge Lock	Cable clamp	Screw-on	Screw-on	Lever lock	Cable clamp	Cable clamp	Lever lock	Lever lock	Lever lock	Cable clamp	Lever lock	Back Surface Clamp	Screw-on	-	-	Pin Lock	-	Clamp-on	Clamp-on	Pin Lock	Double Clamp	Lever lock	Cable clamp	-	Clamp-on	Clamp-on	Cable clamp	Cable clamp	Cable clamp	Pin Lock	Pin Lock	Pin Lock	Double Clamp	Lever lock	Lever lock	Lever lock	Lever lock
Shank height(mm)	20 ～ 25	40	20 ～ 25	10 ～ 25	16 ～ 32	16 ～ 32	16 ～ 25	-	20 ～ 25	8 ～ 18	11 ～ 23	-	20 ～ 25	-	-	-	12 ～ 25	-	-	-	-	20 ～ 25	-	-	25	25	25	12 ～ 25	20 ～ 25	40	20 ～ 25	8 ～ 20	25	19 ～ 25	20 ～ 25	20 ～ 25	20 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	20 ～ 32	20 ～ 25	16 ～ 32	16 ～ 32	16 ～ 32
Shank width(mm)	20 ～ 25	40	20 ～ 25	10 ～ 25	16 ～ 32	16 ～ 32	16 ～ 25	-	20 ～ 25	8 ～ 16	11 ～ 23	-	20 ～ 25	-	-	-	12 ～ 25	-	-	-	-	9 ～ 13	-	-	25	25	25	12 ～ 25	20 ～ 25	40	20 ～ 25	8 ～ 20	25	19 ～ 25	20 ～ 25	20 ～ 25	20 ～ 25	12 ～ 25	12 ～ 25	12 ～ 25	20 ～ 25	20 ～ 25	16 ～ 32	16 ～ 32	16 ～ 32

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	SANDVIK	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL
Product SeriesDòng sản phẩm	DCLN Type (Outer Diameter Machining / End Machining)	Shank Tool Bit / T-Max P Lever Clamp, PSSNR/L	PVPN Type (External Diameter, Copying/Undercutting)	SVPB Type (outer diameter, end surface, profile, relief machining)	SEC-70 Type Tool Bit, PTFN Type	PCLN Type (External Diameter/End-Face Machining)	PSSN Type (External Diameter, End Face, Chamfering)	WTKN-N Type (outer diameter, end surface, profile machining)	DWLN Type (External Diameter/End-Face Machining)	SCLC-FF Type (without Offset) (External Diameter / End Face Machining)	S...SCLC Type (External Diameter/End-Face Machining)	CoroTurn HP Coromant Capto, Cutting Head For Inner Diameter Turning, C-PCLNR/L.-HP	SEC-D Type Tool Bit DCLN Type (Cutting Direction: Right)	DDJN Type (Outer Diameter Machining / Profiling)	PDHN Type (External Diameter, End Face, Profiling)	PSKN Type (End Face Machining)	PTFN Type (End Face Machining)	DVPN Type (External Diameter, Profiling/Undercutting)	PRGC/PRXC/PRGN Types (External Diameter, End Face, Profiling)	ACLC-FF Type (without Offset) (Outer Diameter Machining / End Machining)	SVPP-FF Type (not offset) (outer diameter, end surface, profile, relief machining)	T-Max S Shank Tool Bit For Turning, 177.9	Coromant Capto, CoroTurn, Cutting Head, B-Axis 45° Tool, C-PCMNN-12HP	Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP	SEC-GD Type Profiling Bit GDE Type	Tool Bit for SEC-Solid Sumi Boron FCLN	Tool Bit for SEC-Solid Sumi Boron FN21	SEC-Outer Diameter Bit, ETXN Type	SEC-Outer Diameter Bit, MTXN Type	SEC-Outer Diameter Bit, PCLN Type	T-REX Tool Bit DTR55Q	SEC-Mini Bit, SC Type	SEC-Turning Tool Bit, CSKP Type	SEC-Turning Tool Bit, CTFP Type	SEC-D type tool DCLN type	SEC-D Type Tool Bit, DTFN Type	SEC-D Type Bit, DWLN Type	SEC-30 Type Bit, ESKN Type	SEC-30 Type Tool Bit ESSN Type (Cutting Direction: Left)	SEC-30 Type Bit ESSN Type	SEC-M Type Bit, MWLN Type	SEC-70 Type Tool Bit, PCFN Type	SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Left)	SEC-70 Type Tool Bit PCLN Type (Cutting Direction: Right)	SEC-70 Type Tool Bit, PSKN Type

Loading...Tải…