Holding Tools for O.D. Tuning（Applicable Tip Shape：D (55° Diamond-Shape)）

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit (7° Positive, Rear Clamp), PDJC Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit (7° positive bottom clamp) PDJC type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Lever lock	8 ～ 20	10 ～ 20

  From: 1,983,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder

  KYOCERA

  [Features]·This is SDJC-FF type[Applications]·For small tools, general turning holders, machining of outer diameter and profiling

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Tool Bit PDJN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Lever lock type. For general / profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter / Profiling	Lever lock	20 ～ 32	20 ～ 32

  From: 1,851,721 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PDJN Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); relief angle: negative 0° (N); clamp method: pin lock (P), non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Lever lock	16 ～ 32	16 ～ 32

  From: 1,803,918 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DDJN Type (Outer Diameter Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Cable clamp	-	-

  From: 1,969,949 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7; clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Back Surface Clamp	-	-

  From: 1,990,408 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDJC Type (External Diameter, Profiling) Holder

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, Offset 0 Holder, PDJC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Back Surface Clamp	10 ～ 16	10 ～ 16

  From: 1,983,326 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDLC-FF Type (without Offset) (External Diameter / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDXC Type (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SDLC Type (External Diameter, Copy Machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 4,787,761 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SD Type (7° positive)

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	-	8 ～ 20	8 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Tool Bit DDJN Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. Outer diameter, for profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  PDHN Type (External Diameter, End Face, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Lever lock	-	-

  From: 1,867,852 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDNC Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  S...SDUC Type (External Diameter, Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	13 ～ 23	13 ～ 23

  From: 5,071,037 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DDNNN

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	No-hand	Outer Diameter / Chamfer / Post-Grinding	Cable clamp	-	-

  From: 8,198,528 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11

  SANDVIK

  Quick change system specially developed for small automatic lathesA single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	12 ～ 16	12 ～ 16

  From: 4,307,846 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Front-Turning, SDJC-N/SDJC

  NGK SPARK PLUG

  [Features]·By adopting a unique center height adjustment mechanism, you can easily adjust the height of the cutting edge with a single wrench! Reduces the time spent for accuracy!

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	-	-	-	-

  From: 3,285,973 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit Applicable With DE○○ Insert, Aluminum Alloy Tool Bit for Outer Diameter and Profile Processing

  MITSUBISHI MATERIALS

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 20° (E); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	20	20

  From: 3,442,810 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit, SDNC Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling	Screw-on	10 ～ 20	10 ～ 20

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Outer Diameter Bit, DDHN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type, for outer diameter / profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Tool Bit DDJN Type (Cutting Direction: Left)

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. Outer diameter, for profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Left-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-70 Type Bit PDJN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: pin lock (P)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Left-hand	Outer Diameter / Profiling	Lever lock	20 ～ 32	20 ～ 32

  From: 1,851,721 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SD type copying tool SDJC type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 25	10 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)

  SUMITOMO ELECTRIC HARDMETAL

  Screw-on type. General / Profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	8 ～ 25	8 ～ 25

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit, Zero Offset Holder, SDAC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit offset 0 holder SDAC-X type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Bit Offset 0 Holder SDJC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 7° (C); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Mini Tool Bit, Zero Offset Holder, SDJC-X Type

  SUMITOMO ELECTRIC HARDMETAL

  Sumitomo Electric Industries Hardmetal, outer diameter turning holder SEC-Mini tool bit offset 0 holder SDJC-X type.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand	Outer Diameter / Profiling	Screw-on	10 ～ 12	10 ～ 15

  From: 1,739,394 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-for Solid Sumiboron Bit (dimple lock type), XCLN Type

  SUMITOMO ELECTRIC HARDMETAL

  [Specifications]·Machining applications: flange; compatible insert shape: C (80° two-bolt); compatible insert relief angle: negative 0 (N); clamp method: non-ISO standard

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter / End Face	-	25	25

  From: 4,604,024 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-D Type Bit, DDNN Type

  SUMITOMO ELECTRIC HARDMETAL

  Double clamp type. Outer diameter, for profile cutting[Features]・ A stable clamp improves insert fracture resistance.・ High index precision improves machining precision.・ Insert replacement work is possible from the bottom side of the tool bit.・ Ideal for high efficiency, intermittent, and high hardness material machining.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	No-hand	Outer Diameter / Profiling	Cable clamp	20 ～ 25	20 ～ 25

  From: 1,944,769 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DDHN Type (Outer Diameter Machining / End Machining / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: double clamp (D)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Cable clamp	-	-

  From: 1,969,949 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CDJN Type (Outer Diameter Machining / Profiling / Boring)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: clamp-on (C)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Clamp-on	-	-

  From: 5,420,804 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDNC-F Type (External Diameter, Profiling)

  KYOCERA

  Screw clamping type small tool holder (outer diameter).

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDLP-FF Type (without Offset) (External Diameter / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: positive 11° (P); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Right-hand / Left-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SDLN Type (without Offset) (External Diameter / Profiling)

  KYOCERA

  [Specifications]·Machining applications: outer diameter and profiling; compatible insert shape: D (55° two-bolt); compatible insert relief angle: negative 0° (N); clamp method: screw-on (S)

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand	Outer Diameter / Profiling	Screw-on	-	-

  From: 1,663,657 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN RC, Shank Bit for Ceramic Tips

  SANDVIK

  Unique shape exhibits high performance

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Outer Diameter / Profiling / Chamfer	Cable clamp	32	32

  From: 6,784,805 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Outer Diameter / End Face / Profiling / Chamfer	-	-	-

  From: 13,147,830 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDHNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 9,413,108 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-DDUNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Left-hand	End Face	-	-	-

  From: 8,803,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max P Cutting Unit For Turning, C-PDJNR/L

  SANDVIK

  T-Max P series cutting unit for highly productive external turning of large to medium-sized parts

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	-	-	-

  From: 10,783,648 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Lever lock	-	-

  From: 13,353,411 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	-	-

  From: 11,708,366 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	NGK SPARK PLUG	MITSUBISHI MATERIALS	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	SEC-Mini Tool Bit (7° Positive, Rear Clamp), PDJC Type	SDJC-FF Type (without Offset) (External Diameter / Profiling) Holder	SEC-70 Type Tool Bit PDJN Type (Cutting Direction: Right)	PDJN Type (External Diameter, Profiling)	DDJN Type (Outer Diameter Machining / Profiling)	ADJC-FF Type (without Offset) (Outer Diameter Machining / Profiling)	SDJC Type (External Diameter, Profiling) Holder	SEC-Mini Bit, Offset 0 Holder, PDJC-X Type	SDLC-FF Type (without Offset) (External Diameter / Profiling)	SDXC Type (External Diameter, End Face, Profiling)	S...SDLC Type (External Diameter, Copy Machining)	SEC-Mini Bit, SD Type (7° positive)	SEC-D Type Tool Bit DDJN Type (Cutting Direction: Right)	PDHN Type (External Diameter, End Face, Profiling)	SDNC Type (External Diameter, Profiling)	S...SDUC Type (External Diameter, Profiling)	Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DDNNN	Shank Tool Bit, Outer Diameter Turning Compact Lathes, QS Series, Short Tool Bit, QS-SDNCN-E11	Holder For Front-Turning, SDJC-N/SDJC	Tool Bit Applicable With DE○○ Insert, Aluminum Alloy Tool Bit for Outer Diameter and Profile Processing	SEC-Mini Bit, SDNC Type	SEC-Outer Diameter Bit, DDHN Type	SEC-D Type Tool Bit DDJN Type (Cutting Direction: Left)	SEC-70 Type Bit PDJN Type	SEC-SD type copying tool SDJC type	SEC-SD Type Profiling Tool Bit SDJC Type (Cutting Direction: Right)	SEC-Mini Tool Bit, Zero Offset Holder, SDAC-X Type	SEC-Mini Bit Offset 0 Holder SDJC-X Type	SEC-Mini Tool Bit, Zero Offset Holder, SDJC-X Type	SEC-for Solid Sumiboron Bit (dimple lock type), XCLN Type	SEC-D Type Bit, DDNN Type	DDHN Type (Outer Diameter Machining / End Machining / Profiling)	CDJN Type (Outer Diameter Machining / Profiling / Boring)	SDNC-F Type (External Diameter, Profiling)	SDLP-FF Type (without Offset) (External Diameter / Profiling)	SDLN Type (without Offset) (External Diameter / Profiling)	CORO-TURN RC, Shank Bit for Ceramic Tips	T-Max P Cutting Unit For Turning	T-Max P Cutting Unit For Turning, C-DDHNR/L	T-Max P Cutting Unit For Turning, C-DDJNR/L	T-Max P Cutting Unit For Turning, C-DDUNR/L	T-Max P Cutting Unit For Turning, C-PDJNR/L	CoroTurn HP, SL Cutting Head, Outer Diameter Turning, SL-PDJNR/L-15HP	CoroTurn HP SL Cutting Head For Outer Diameter Turning, TR-SL-D13JCR/L-HP-X
From	1,983,326 VND	1,663,657 VND	1,851,721 VND	1,803,918 VND	1,969,949 VND	1,990,408 VND	1,663,657 VND	1,983,326 VND	1,663,657 VND	1,663,657 VND	4,787,761 VND	1,739,394 VND	1,944,769 VND	1,867,852 VND	1,663,657 VND	5,071,037 VND	8,453,730 VND	8,198,528 VND	4,307,846 VND	3,285,973 VND	3,442,810 VND	1,739,394 VND	1,944,769 VND	1,944,769 VND	1,851,721 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	1,739,394 VND	4,604,024 VND	1,944,769 VND	1,969,949 VND	5,420,804 VND	1,663,657 VND	1,663,657 VND	1,663,657 VND	6,784,805 VND	13,147,830 VND	9,413,108 VND	9,413,108 VND	8,803,333 VND	10,783,648 VND	13,353,411 VND	11,708,366 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	9 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more
Applicable Tip Shape	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)
Applicable Chip Clearance Angle	Pozidriv	Pozidriv	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Pozidriv	Pozidriv	Negative	Negative	-	-	Pozidriv	Pozidriv	Negative	Negative	Negative	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Pozidriv	Negative	Negative	Negative	Negative	Pozidriv	Pozidriv	Negative	-	-	-	-	-	-	-	-
Selfishly	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	No-hand	Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Left-hand	Left-hand	Left-hand	Right-hand	Right-hand / Left-hand	Left-hand	Right-hand	Right-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand	Left-hand	Right-hand / Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand
Application	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Chamfer / Post-Grinding	Outer Diameter / Profiling / Post-Grinding	-	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / End Face / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	End Face	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer
Clamp Shape	Lever lock	Screw-on	Lever lock	Lever lock	Cable clamp	Back Surface Clamp	Screw-on	Back Surface Clamp	Screw-on	Screw-on	Screw-on	-	Cable clamp	Lever lock	Screw-on	Screw-on	Cable clamp	Cable clamp	Clamp-on	-	Screw-on	Screw-on	Cable clamp	Cable clamp	Lever lock	Screw-on	Screw-on	Screw-on	Screw-on	Screw-on	-	Cable clamp	Cable clamp	Clamp-on	Screw-on	Screw-on	Screw-on	Cable clamp	-	-	-	-	-	Lever lock	Clamp-on
Shank height(mm)	8 ～ 20	-	20 ～ 32	16 ～ 32	-	-	-	10 ～ 16	-	-	-	8 ～ 20	20 ～ 25	-	-	13 ～ 23	-	-	12 ～ 16	-	20	10 ～ 20	20 ～ 25	20 ～ 25	20 ～ 32	10 ～ 25	8 ～ 25	10 ～ 12	10 ～ 12	10 ～ 12	25	20 ～ 25	-	-	-	-	-	32	-	-	-	-	-	-	-
Shank width(mm)	10 ～ 20	-	20 ～ 32	16 ～ 32	-	-	-	10 ～ 16	-	-	-	8 ～ 20	20 ～ 25	-	-	13 ～ 23	-	-	12 ～ 16	-	20	10 ～ 20	20 ～ 25	20 ～ 25	20 ～ 32	10 ～ 25	8 ～ 25	10 ～ 15	10 ～ 15	10 ～ 15	25	20 ～ 25	-	-	-	-	-	32	-	-	-	-	-	-	-

Loading...Tải…